Use of non-classical light in a quantum illumination scheme provides an advantage over classical illumination when used for LIDAR with a simple and realistic detection scheme based on Geiger-mode single photon detectors. Here we provide an analysis that accounts for the additional information gained when detectors do not fire that is typically neglected and show an improvement in performance of quantum illumination. Moreover, we provide a theoretical framework quantifying performance of both quantum and classical illumination for simple target detection, showing parameters for which a quantum advantage exists. Knowledge of the regimes that demonstrate a quantum advantage will inform where possible practical quantum LIDAR utilising non-classical light could be realised.
Use of non-classical light in a quantum illumination scheme provides an advantage over classical illumination when used for LIDAR with a simple and realistic detection scheme based on Geiger-mode single photon detectors. Here we provide an analysis that accounts for the additional information gained when detectors do not fire that is typically neglected and show an improvement in performance of quantum illumination. Moreover, we provide a theoretical framework quantifying performance of both quantum and classical illumination for simple target detection, showing parameters for which a quantum advantage exists. Knowledge of the regimes that demonstrate a quantum advantage will inform where possible practical quantum LIDAR utilising non-classical light could be realised.
The task of sensing the presence of a target object using a weak light source is challenging when the object is embedded in a noisy environment. One possibility is to use quantum illumination to do this, as it can outperform classical illumination in determining the object presence and range. This advantage persists even when both classical and quantum illumination are restricted to identical suboptimal object-detection measurements based on nonsimultaneous, phase-insensitive coincidence counts. Motivated by realistic experimental protocols, we present a theoretical framework for analyzing coincident multishot data with simple detectors. This approach allows for the often-overlooked noncoincidence data to be included, as well as providing a calibration-free threshold for inferring an object’s presence and range, enabling a fair comparison between different detection regimes. Our results quantify the advantage of quantum over classical illumination when performing target discrimination in a noisy thermal environment, including estimating the number of shots required to detect a target with a given confidence level. Published by the American Physical Society 2024
Quantum Lidar is a future technology that can mean different things to different people. To some it means detection and identification of classical-type lidar signals reflected from an illuminated target at or near the single photon level. This is facilitated by advances in semiconductor detector technology that allow highly efficient photocounting. To others it is more stringent, requiring exploitation of covertness associated with being essentially undetectable by the target in a thermal background, whilst allowing the lidar operator to filter her own signal from this noise. Again there is nothing specifically quantum about this. Any source that mimics of the energy rate per bandwidth seen by the illuminated object in the direction of the source can appear covert. In order to exploit quantum optics one can use inherent correlations, whether entangled or otherwise between light beams. Simple correlated optical beams can do this in two ways, perhaps by storing one beam as a reference and later performing correlated detection with the return signal in a phase sensitive manner. This is the “gold standard” for quantum lidar, but will be difficult outside of laboratory situations. In microscopy such phase control might be possible, or perhaps in the radio or microwave region for a quantum radar. Less challenging is a scenario in which an immediate local measurement of one beam conditions the beam sent to the target, allowing the return signal to be sifted from noise more easily. Here we will consider such a simple system, providing a range equation for a basic quantum lidar if it is to be operated covertly or openly. Open operation allows increased quantum signal brightness but also provides a quantum advantage, unspoofability – the lidar operator can in principle recognise their own return signal. We will also provide an analysis of quantum lidar detection based on quantum hypothesis testing and use this to perform Monte Carlo simulation of both target detections and false positive avoidance in a noisy background. The theory will be applied to experimental data.
We investigate the optimization of direct measurement twin beam (signal-idler) quantum illumination. We focus on each of the three main components of such a system in turn: the detectors, the light beam parameters and the information processing protocol. Surprisingly, there can be an advantage to having a signal detector whose quantum efficiency is significantly less than perfect. This advantage does not vanish in the quantum lidar limits of low object reflectivities or signal strengths. We show that decreasing the pulse separation, while keeping the photon flux fixed to retain the same degree of covertness, can improve target detection performance dramatically. Finally, we show that post-selecting on the idler detector firing is sub-optimal for target detection.
Modern optical sensing systems, particularly LiDAR, play a central role in remote sensing and precision measurement. However, they face fundamental limits when operating in noisy and highly lossy environments. Quantum illumination has emerged as a promising approach to overcome these challenges by exploiting quantum correlations. This work presents the system design and performance analysis of a quantum illumination based LiDAR architecture operating at optical frequencies. The proposed system exploits entangled photon pairs generated through spontaneous parametric down conversion to enhance detection sensitivity and robustness under weak return conditions. A complete hardware oriented framework is developed, including the entanglement source, nonlinear crystal configuration, pump laser requirements, optical propagation path, quantum memory implementation, and a detection architecture based on quantum erasure Hong-Ou-Mandel interference. Practical realization using superconducting nanowire single photon detectors is discussed to enable high efficiency and low noise photon measurement. In addition, a system level link budget and noise analysis evaluates the impact of optical losses, atmospheric attenuation, turbulence, and detector imperfections on overall performance. The study highlights how quantum correlations can improve signal to noise performance compared with classical illumination strategies, particularly in low reflectivity and high background scenarios. The presented architecture provides a realistic framework for implementing quantum LiDAR systems and supports the development of next generation long range sensing technologies.
Quantum lidar leverages the quantum properties of light to gain advantages over classical lidar, such as enhancing range accuracy and reducing the emitted optical power needed to detect a target. The low optical power makes quantum lidar especially attractive for minimizing the probability of being detected by an adversary. Various quantum sources have been considered for quantum lidar; however, a practical comparison between such widely different systems is challenging. Here, we develop a theoretical model tailored to quantum lidar for stealth ranging and imaging, and compare the performance of such systems using an attenuated pulsed laser, a quantum dot single-photon source, and a spontaneous parametric down-conversion correlated photon pair source. To ensure a fair comparison, all sources employ time correlations for detection and are equalized in terms of optical power and detectability by an adversary. Furthermore, we demonstrate the limitation of the signal-to-noise ratio (SNR) as a sole metric, as it ignores the acquisition time required to confidently identify a target. To address the limitation of SNR, we supplement this metric with receiver operating characteristic (ROC) curves. With the inclusion of ROC curves, we find that the pulsed laser and the quantum dot single-photon source outperform the correlated photon pair source when an adversary possesses a non-photon-number-resolving detector. In contrast, when facing a photon-number-resolving detector, the quantum dot single-photon source remains optimal while the correlated photon pair source outperforms the pulsed laser. Our findings demonstrate that the use of a correlated photon pair source for quantum lidar does not always outperform alternative sources with equal SNR and optical power. Finally, using ROC curves, we establish the practical range limitations of quantum lidar.
Quantum illumination is an idea for detection of targets in the presence of a noisy background using a photon pair that is entangled in some degree of freedom, such as frequency. This paper provides a simple and illustrative proof-of-concept setup of a quantum illumination investigation. Detection and imaging is investigated in the optical regime using a correlated source and the performance of classical illumination and quantum illumination are compared for detection and imaging experiments. The quantum advantage is demonstrated in the acquired data and possible application spaces and technological requirements are identified for developing practical systems.