Challenges
Datasets
Workspaces
Papers
Discussions
Leaderboard
Log inSign up
Challenges
Datasets
Workspaces
Papers
Discussions
Leaderboard
Blog
Job Board
Q3AS

© 2026 Aqora Quantum S.A.S.

TermsPrivacyLegal Notice

arXiv:2108.07962 · Physical Review Applied

Impedance-Matched Differential Superconducting Nanowire Detectors

Marco Colangelo, Boris A. Korzh, Jason P. Allmaras, Andrew D. Beyer, Andrew Mueller, Ryan M. Briggs, Bruce Bumble, Marcus C. Runyan, Martin J. Stevens, Adam N. McCaughan, Di Zhu, S. J. Smith, Wolfgang H. Becker, Lautaro Narváez, Joshua C. Bienfang, Simone Frasca, Angel E. Velasco, Edward Ramirez, Alexander B. Walter, Ekkehart Schmidt, Emma E. Wollman, M. Spiropulu, Richard P. Mirin, Sae Woo Nam, Karl K. Berggren, Matthew D. Shaw

Published Apr 28, 2023• 45 citations
arXivHTMLPDF

Abstract

Superconducting nanowire single-photon detectors (SNSPDs) are the highest-performance photon-counting technology in the near infrared, but traditional designs typically trade off between timing resolution and detection efficiency. The authors utilize transmission-line engineering and differential readout to achieve a design with high detection efficiency and low jitter simultaneously. This design also enables imaging capabilities and photon-number resolution, and is compatible with commercial time taggers. The device is a versatile solution for photon counting in various applications, including quantum computing, quantum communication, biomedicine, and ranging.

DOI
10.1103/physrevapplied.19.044093

Related papers

Impedance-matched differential SNSPDs for practical photon counting with sub-10 ps timing jitter

Marco Colangelo, Andrew D. Beyer, Boris A. Korzh +24 more

We demonstrate large-area superconducting nanowire single-photon detectors (SNSPDs) with simultaneous high system detection efficiency and low system jitter. We describe the device architecture and discuss optimal readout setup for practical applications.

Conference on Lasers and Electro-Optics•Jan 1, 2021•1 citation

Superconducting nanowire single-photon detectors for communication and fundamental physics applications

Jamie Luskin, Emma E. Wollman, Ekkehart Schmidt +9 more

Superconducting Nanowire Single Photon Detectors (SNSPDs) excel at a wide variety of performance criteria for single photon counting. They combine unprecedented high detection efficiency, high timing resolution, high count rates, low intrinsic dark count rates, and are sensitive to ultraviolet through mid-infrared single-photons. At JPL, we are working on several projects to push the performance limits of SNSPDs to achieve higher maximum count rates, larger active areas, higher timing resolution, and a wider spectral range. Our recent advances enable new applications for dark matter detection, imaging, and space-to-ground communication and provide insight into the fundamental physics of single-photon detection in superconducting nanowires.

Advanced Photon Counting Techniques•Apr 30, 2021•0 citations

Temporal and photon number resolution of superconducting nanowire single-photon detectors

Jun Xie, Hengbin Zhang

Single-photon detectors based on superconducting nanowires (SNSPDs) are promising technologies with good comprehensive performance, especially their excellent temporal resolution for applications in quantum precision measurements and time-varying ultimate detection. The response time of an SNSPD can be characterized by aspects of hotspot thermal relaxation and electrical relaxation, which are also responsible for the time jitter of the SNSPD. The factors affecting the temporal resolution of an SNSPD, the underlying physical mechanism, the intrinsic limit, and possible optimization methods are reviewed. The poor energy resolution and lack of photon number resolution for conventional SNSPDs can be overcome by using high-impedance readouts, novel device structures, characterization methods and, most importantly, SNSPD arrays, which can simultaneously further improve the temporal resolution. The study of the temporal and photon number resolution of SNSPDs helps reveal the underlying physics and is valuable for their new application in various practical engineering areas.

Applied Physics B•Jun 5, 2024•6 citations

Superconducting nanowire single-photon detectors: physics and applications

Chandra M. Natarajan, Michael G Tanner, Robert H. Hadfield

Single-photon detectors based on superconducting nanowires (SSPDs or SNSPDs) have rapidly emerged as a highly promising photon-counting technology for infrared wavelengths. These devices offer high efficiency, low dark counts and excellent timing resolution. In this review, we consider the basic SNSPD operating principle and models of device behaviour. We give an overview of the evolution of SNSPD device design and the improvements in performance which have been achieved. We also evaluate device limitations and noise mechanisms. We survey practical refrigeration technologies and optical coupling schemes for SNSPDs. Finally we summarize promising application areas, ranging from quantum cryptography to remote sensing. Our goal is to capture a detailed snapshot of an emerging superconducting detector technology on the threshold of maturity.

arXiv:1204.5560•Superconductor Science and Technology•Apr 4, 2012•1,092 citations

New Generation of Superconducting Nanowire Single-Photon Detectors

Gregory N Gol'tsman

We present an overview of recent results for new generation of infrared and optical superconducting nanowire single-photon detectors (SNSPDs) that has already demonstrated a performance that makes them devices-of-choice for many applications. SNSPDs provide high efficiency for detecting individual photons while keeping dark counts and timing jitter minimal. Besides superior detection performance over a broad optical bandwidth, SNSPDs are also compatible with an integrated optical platform as a crucial requirement for applications in emerging quantum photonic technologies. By embedding SNSPDs in nanophotonic circuits we realize waveguide integrated single photon detectors which unite all desirable detector properties in a single device.

EPJ Web of Conferences•Jan 1, 2015•0 citations

Advanced Superconducting Nanowire Single Photon Detectors for Photonic Quantum Technologies

Jean‐Michel Gérard, Anna Mukhtarova, Luca Redaelli +3 more

In the field of quantum technologies, the superconducting nanowire single photon detector(SNSPD) is nowadays well recognized as a key enabling device. SNSPDs combine high detectionefficiency in the visible and near IR spectral ranges, timing jitter as low as 10 ps, low dark count rate(<100 s−1) and cut-off frequency above 100 MHz. These features make it particularly attractive e.g. forfundamental quantum optics experiments and quantum communications.Plug-and-play SNSPDs with fibered optical access, as shown in Figure 1, are based on a meandernanowire defined by patterning an ultrathin (<10 nm) superconducting film. The device is designedso that absorption of a single photon is enough to brake locally the superconducting order, and toinduce a measurable change of the wire’s resistance. Until recently, such devices displayed two mainlimitations: (1) their efficiency did not exceed ~40% due to the limited optical absorption of the thinfilm; and (2) their response was strongly polarization-sensitive, due to the optical anisotropy of thenanowire. I will present two different approaches which enable to get very high (>90% [1]) andpolarization-insensitive [2,3] detection efficiency. We consider designs based on the integration of thenanowire within an optical microcavity (compatible with the plug-and-play configuration) or on topof an optical waveguide (preferred approach for integration in photonic circuits). I will finally discussnovel application prospects of such detectors, with emphasis on photon-number resolution.

•Jan 1, 2018•0 citations
Superconducting nanowire single-photon detectors (SNSPDs) are the highest-performance photon-counting technology in the near infrared, but traditional designs typically trade off between timing resolution and detection efficiency. The authors utilize transmission-line engineering and differential readout to achieve a design with high detection efficiency and low jitter simultaneously. This design also enables imaging capabilities and photon-number resolution, and is compatible with commercial time taggers. The device is a versatile solution for photon counting in various applications, including quantum computing, quantum communication, biomedicine, and ranging.
Superconducting Nanowire Single Photon Detectors (SNSPDs) excel at a wide variety of performance criteria for single photon counting. They combine unprecedented high detection efficiency, high timing resolution, high count rates, low intrinsic dark count rates, and are sensitive to ultraviolet through mid-infrared single-photons. At JPL, we are working on several projects to push the performance limits of SNSPDs to achieve higher maximum count rates, larger active areas, higher timing resolution, and a wider spectral range. Our recent advances enable new applications for dark matter detection, imaging, and space-to-ground communication and provide insight into the fundamental physics of single-photon detection in superconducting nanowires.
Single-photon detectors based on superconducting nanowires (SNSPDs) are promising technologies with good comprehensive performance, especially their excellent temporal resolution for applications in quantum precision measurements and time-varying ultimate detection. The response time of an SNSPD can be characterized by aspects of hotspot thermal relaxation and electrical relaxation, which are also responsible for the time jitter of the SNSPD. The factors affecting the temporal resolution of an SNSPD, the underlying physical mechanism, the intrinsic limit, and possible optimization methods are reviewed. The poor energy resolution and lack of photon number resolution for conventional SNSPDs can be overcome by using high-impedance readouts, novel device structures, characterization methods and, most importantly, SNSPD arrays, which can simultaneously further improve the temporal resolution. The study of the temporal and photon number resolution of SNSPDs helps reveal the underlying physics and is valuable for their new application in various practical engineering areas.
Single-photon detectors based on superconducting nanowires (SSPDs or SNSPDs) have rapidly emerged as a highly promising photon-counting technology for infrared wavelengths. These devices offer high efficiency, low dark counts and excellent timing resolution. In this review, we consider the basic SNSPD operating principle and models of device behaviour. We give an overview of the evolution of SNSPD device design and the improvements in performance which have been achieved. We also evaluate device limitations and noise mechanisms. We survey practical refrigeration technologies and optical coupling schemes for SNSPDs. Finally we summarize promising application areas, ranging from quantum cryptography to remote sensing. Our goal is to capture a detailed snapshot of an emerging superconducting detector technology on the threshold of maturity.
We present an overview of recent results for new generation of infrared and optical superconducting nanowire single-photon detectors (SNSPDs) that has already demonstrated a performance that makes them devices-of-choice for many applications. SNSPDs provide high efficiency for detecting individual photons while keeping dark counts and timing jitter minimal. Besides superior detection performance over a broad optical bandwidth, SNSPDs are also compatible with an integrated optical platform as a crucial requirement for applications in emerging quantum photonic technologies. By embedding SNSPDs in nanophotonic circuits we realize waveguide integrated single photon detectors which unite all desirable detector properties in a single device.
In the field of quantum technologies, the superconducting nanowire single photon detector(SNSPD) is nowadays well recognized as a key enabling device. SNSPDs combine high detectionefficiency in the visible and near IR spectral ranges, timing jitter as low as 10 ps, low dark count rate(<100 s−1) and cut-off frequency above 100 MHz. These features make it particularly attractive e.g. forfundamental quantum optics experiments and quantum communications.Plug-and-play SNSPDs with fibered optical access, as shown in Figure 1, are based on a meandernanowire defined by patterning an ultrathin (<10 nm) superconducting film. The device is designedso that absorption of a single photon is enough to brake locally the superconducting order, and toinduce a measurable change of the wire’s resistance. Until recently, such devices displayed two mainlimitations: (1) their efficiency did not exceed ~40% due to the limited optical absorption of the thinfilm; and (2) their response was strongly polarization-sensitive, due to the optical anisotropy of thenanowire. I will present two different approaches which enable to get very high (>90% [1]) andpolarization-insensitive [2,3] detection efficiency. We consider designs based on the integration of thenanowire within an optical microcavity (compatible with the plug-and-play configuration) or on topof an optical waveguide (preferred approach for integration in photonic circuits). I will finally discussnovel application prospects of such detectors, with emphasis on photon-number resolution.