Challenges
Datasets
Workspaces
Papers
Discussions
Leaderboard
Log inSign up
Challenges
Datasets
Workspaces
Papers
Discussions
Leaderboard
Blog
Job Board
Q3AS

© 2026 Aqora Quantum S.A.S.

TermsPrivacyLegal Notice

arXiv:2107.07466 · IEEE International Symposium on Information Theory (ISIT)

Trade-Based LDPC Codes

Farzane Amirzade, Daniel Panario, Mohammad‐Reza Sadeghi

Published Jun 26, 2022• 4 citations
arXivHTMLPDF

Abstract

LDPC codes based on multi-edge protographs potentially have larger minimum distances compared to their counterparts, single-edge protographs. However, considering different features of their Tanner graph, such as short cycles, girth and other graphical structures, is harder than for Tanner graphs from single-edge protographs. Here, we provide a novel approach to construct the parity-check matrix of an LDPC code which is based on trades obtained from block designs. We employ our method to construct multi-edge quasi-cyclic (QC) LDPC codes.We use those trade-based matrices to define base matrices of multi-edge protographs. The construction of exponent matrices corresponding to these base matrices has less complexity than the ones proposed in the literature. We prove that these base matrices result in QC-LDPC codes with smaller lower bounds on the lifting degree than existing ones.

DOI
10.1109/isit50566.2022.9834826

Related papers

Design of Multiple-Edge Protographs for QC LDPC Codes Avoiding Short Inevitable Cycles

Hosung Park, Seokbeom Hong, Jong-Seon No +1 more

There have been lots of efforts on the construction of quasi-cyclic (QC) low-density parity-check (LDPC) codes with large girth. However, most of them focus on protographs with single edges and little research has been done for the construction of QC LDPC codes lifted from protographs with multiple (i.e., parallel) edges. Compared to single-edge protographs, multiple-edge protographs have benefits such that QC LDPC codes lifted from them can potentially have larger minimum Hamming distance. In this paper, all subgraph patterns of multiple-edge protographs, which prevent QC LDPC codes from having large girth by inducing inevitable cycles, are fully investigated based on a graph-theoretic approach. By using combinatorial designs, a systematic construction method of multiple-edge protographs is proposed for regular QC LDPC codes with girth at least 12 and another method is proposed for regular QC LDPC codes with girth at least 14. Moreover, a construction algorithm of QC LDPC codes based on certain liftings of multiple-edge protographs is proposed and it is shown that the resulting QC LDPC codes have larger upper bounds on the minimum Hamming distance than those lifted from single-edge protographs. Simulation results are provided to compare the performance of the proposed QC LDPC codes with progressive edge-growth (PEG) LDPC codes and with PEG QC LDPC codes.

arXiv:1210.3906•IEEE Transactions on Information Theory•Jun 14, 2013•31 citations

On the Construction of Multitype Quasi-Cyclic Low-Density Parity-Check Codes With Different Girth and Length

Farzaneh Abedi, Mohammad Gholami

Multitype quasi-cyclic (QC) low-density parity-check (LDPC) codes are a class of protograph LDPC codes lifted cyclically from protographs with multiple edges, represented by two weight and slope matrices. For a given weight-matrix, an approach is proposed to find the maximum-achievable girth$g_{\max }$of the corresponding multitype QC-LDPC codes by some inevitable chains having less complexity than the existing methods. This advantage leads to some new patterns of the weight matrices such that the corresponding codes have some improvements in terms of the maximum-achievable girths or the minimum-distance upper-bounds. In continue, for a given weight-matrix with maximum-achievable girth$g_{\max }$, some slope-matrices are constructed by a depth-first search algorithm for which the corresponding multitype QC-LDPC codes with even girth$g$,$g\le g_{\max }$, have smaller lengths, higher rates, or larger minimum-distances than the state-of-the-art achievements. Simulation results show that the constructed codes have some error-rate advantages than PEG, random-like, CCSDS, and 802.11n/ac IEEE standard LDPC codes.

IEEE Access•Jan 1, 2021•2 citations

Counting Short Cycles of Quasi Cyclic Protograph LDPC Codes

Mehdi Karimi, Amir H. Banihashemi

An efficient method for counting short cycles in the Tanner graphs of quasi cyclic (QC) protograph low-density parity-check (LDPC) codes is presented. The method is based on the relationship between the number of short cycles in the graph and the eigenvalues of the directed edge matrix of the graph. We demonstrate that for a QC protograph LDPC code, the complexity of computing such eigenvalues can be reduced significantly by representing the directed edge matrix as a block circulant matrix. Numerical results are presented to show the lower complexity of the proposed method compared to the existing algorithms for counting short cycles. These results also reveal that QC LDPC codes on average have a superior short cycle and girth distribution compared to similar randomly constructed codes.

IEEE Communications Letters•Feb 10, 2012•33 citations

Quasi-Cyclic Low-Density Parity-Check Codes Based on Progressive Cycle Growth Algorithm

Yuanhua Liu, Meiling Zhang, Niu Xin-Liang

Short cycles in the Tanner graph of a given LDPC code has negative effect on the performance of iterative decoding. To improve the performance, we presented an approach for constructing Quasi-Cyclic Low-Density Parity-Check (QC-LDPC) codes whose associated Tanner graph has large girth and a small amount of short cycles. Each column block of the parity check matrix was designed by adding circulant permutation sub-matrices one after another, provided the current parity check matrix has minimal number of short cycles. The condition for the proposed QC-LDPC codes to have girth at least 6 was also analyzed. Regular and irregular QC-LDPC codes with various lengths and rates can be constructed. Simulations show that the proposed QC-LDPC codes have less short cycles and better performance than existing progressive edge growth based QC-LDPC codes.

International Conference on Instrumentation and Measurement, Computer, Communication and Control (IMCCC)•Jul 1, 2016•1 citation

Analytical Lower Bound on the Lifting Degree of Multiple-Edge QC-LDPC Codes With Girth 6

Mohammad‐Reza Sadeghi, Farzane Amirzade

Multiple-edge protographs have some advantages over single-edge protographs, such as potentially having larger minimum Hamming distance. However, most of results in the literature are related to the construction of single-edge quasi-cyclic low-density parity-check codes (QC-LDPC) codes and little research has been done for the construction of multiple-edge QC-LDPC codes. In this letter, for the first time, necessary and sufficient conditions for the exponent matrices to have multiple-edge QC-LDPC codes with girth 6 are provided. As a consequence of this letter, a lower bound on the lifting degree of regular and irregular multiple-edge QC-LDPC codes with girth 6 is derived. We also present QC-LDPC codes whose lifting degrees meet our proposed lower bound. These codes have shorter lengths compared with single-edge QC-LDPC codes. Another contribution of this letter is presenting a technique to reduce the size of the search space to find these codes.

IEEE Communications Letters•May 29, 2018•24 citations

Quasi-Cyclic LDPC Codes Based on Pre-Lifted Protographs

David G. M. Mitchell, Roxana Smarandache, Daniel J. Costello

Quasi-cyclic low-density parity-check (QC-LDPC) codes based on protographs are of great interest to code designers because analysis and implementation are facilitated by the protograph structure and the use of circulant permutation matrices for protograph lifting. However, these restrictions impose undesirable fixed upper limits on important code parameters, such as minimum distance and girth. In this paper, we consider an approach to constructing QC-LDPC codes that uses a two-step lifting procedure based on a protograph, and, by following this method instead of the usual one-step procedure, we obtain improved minimum distance and girth properties. We also present two new design rules for constructing good QC-LDPC codes using this two-step lifting procedure, and in each case, we obtain a significant increase in minimum distance and achieve a certain guaranteed girth compared with one-step circulant-based liftings. The expected performance improvement is verified by simulation results.

arXiv:1407.5364•IEEE Transactions on Information Theory•Jul 24, 2014•58 citations
LDPC codes based on multi-edge protographs potentially have larger minimum distances compared to their counterparts, single-edge protographs. However, considering different features of their Tanner graph, such as short cycles, girth and other graphical structures, is harder than for Tanner graphs from single-edge protographs. Here, we provide a novel approach to construct the parity-check matrix of an LDPC code which is based on trades obtained from block designs. We employ our method to construct multi-edge quasi-cyclic (QC) LDPC codes.We use those trade-based matrices to define base matrices of multi-edge protographs. The construction of exponent matrices corresponding to these base matrices has less complexity than the ones proposed in the literature. We prove that these base matrices result in QC-LDPC codes with smaller lower bounds on the lifting degree than existing ones.
There have been lots of efforts on the construction of quasi-cyclic (QC) low-density parity-check (LDPC) codes with large girth. However, most of them focus on protographs with single edges and little research has been done for the construction of QC LDPC codes lifted from protographs with multiple (i.e., parallel) edges. Compared to single-edge protographs, multiple-edge protographs have benefits such that QC LDPC codes lifted from them can potentially have larger minimum Hamming distance. In this paper, all subgraph patterns of multiple-edge protographs, which prevent QC LDPC codes from having large girth by inducing inevitable cycles, are fully investigated based on a graph-theoretic approach. By using combinatorial designs, a systematic construction method of multiple-edge protographs is proposed for regular QC LDPC codes with girth at least 12 and another method is proposed for regular QC LDPC codes with girth at least 14. Moreover, a construction algorithm of QC LDPC codes based on certain liftings of multiple-edge protographs is proposed and it is shown that the resulting QC LDPC codes have larger upper bounds on the minimum Hamming distance than those lifted from single-edge protographs. Simulation results are provided to compare the performance of the proposed QC LDPC codes with progressive edge-growth (PEG) LDPC codes and with PEG QC LDPC codes.
Multitype quasi-cyclic (QC) low-density parity-check (LDPC) codes are a class of protograph LDPC codes lifted cyclically from protographs with multiple edges, represented by two weight and slope matrices. For a given weight-matrix, an approach is proposed to find the maximum-achievable girthgmax⁡g_{\max }gmax​of the corresponding multitype QC-LDPC codes by some inevitable chains having less complexity than the existing methods. This advantage leads to some new patterns of the weight matrices such that the corresponding codes have some improvements in terms of the maximum-achievable girths or the minimum-distance upper-bounds. In continue, for a given weight-matrix with maximum-achievable girthgmax⁡g_{\max }gmax​, some slope-matrices are constructed by a depth-first search algorithm for which the corresponding multitype QC-LDPC codes with even girthggg,g≤gmax⁡g\le g_{\max }g≤gmax​, have smaller lengths, higher rates, or larger minimum-distances than the state-of-the-art achievements. Simulation results show that the constructed codes have some error-rate advantages than PEG, random-like, CCSDS, and 802.11n/ac IEEE standard LDPC codes.
An efficient method for counting short cycles in the Tanner graphs of quasi cyclic (QC) protograph low-density parity-check (LDPC) codes is presented. The method is based on the relationship between the number of short cycles in the graph and the eigenvalues of the directed edge matrix of the graph. We demonstrate that for a QC protograph LDPC code, the complexity of computing such eigenvalues can be reduced significantly by representing the directed edge matrix as a block circulant matrix. Numerical results are presented to show the lower complexity of the proposed method compared to the existing algorithms for counting short cycles. These results also reveal that QC LDPC codes on average have a superior short cycle and girth distribution compared to similar randomly constructed codes.
Short cycles in the Tanner graph of a given LDPC code has negative effect on the performance of iterative decoding. To improve the performance, we presented an approach for constructing Quasi-Cyclic Low-Density Parity-Check (QC-LDPC) codes whose associated Tanner graph has large girth and a small amount of short cycles. Each column block of the parity check matrix was designed by adding circulant permutation sub-matrices one after another, provided the current parity check matrix has minimal number of short cycles. The condition for the proposed QC-LDPC codes to have girth at least 6 was also analyzed. Regular and irregular QC-LDPC codes with various lengths and rates can be constructed. Simulations show that the proposed QC-LDPC codes have less short cycles and better performance than existing progressive edge growth based QC-LDPC codes.
Multiple-edge protographs have some advantages over single-edge protographs, such as potentially having larger minimum Hamming distance. However, most of results in the literature are related to the construction of single-edge quasi-cyclic low-density parity-check codes (QC-LDPC) codes and little research has been done for the construction of multiple-edge QC-LDPC codes. In this letter, for the first time, necessary and sufficient conditions for the exponent matrices to have multiple-edge QC-LDPC codes with girth 6 are provided. As a consequence of this letter, a lower bound on the lifting degree of regular and irregular multiple-edge QC-LDPC codes with girth 6 is derived. We also present QC-LDPC codes whose lifting degrees meet our proposed lower bound. These codes have shorter lengths compared with single-edge QC-LDPC codes. Another contribution of this letter is presenting a technique to reduce the size of the search space to find these codes.
Quasi-cyclic low-density parity-check (QC-LDPC) codes based on protographs are of great interest to code designers because analysis and implementation are facilitated by the protograph structure and the use of circulant permutation matrices for protograph lifting. However, these restrictions impose undesirable fixed upper limits on important code parameters, such as minimum distance and girth. In this paper, we consider an approach to constructing QC-LDPC codes that uses a two-step lifting procedure based on a protograph, and, by following this method instead of the usual one-step procedure, we obtain improved minimum distance and girth properties. We also present two new design rules for constructing good QC-LDPC codes using this two-step lifting procedure, and in each case, we obtain a significant increase in minimum distance and achieve a certain guaranteed girth compared with one-step circulant-based liftings. The expected performance improvement is verified by simulation results.