The coherent transduction between microwave and optical frequencies is critical to interconnect superconducting quantum processors over long distances. However, it is challenging to establish such a quantum interface with high efficiency and small added noise based on the standard direct conversion scheme. Here, we propose an electro-optic transduction system based on continuous-variable quantum teleportation. Reliable quantum-information transmission can be realized with an arbitrarily small cooperativity, in contrast to the direct conversion scheme, which requires a large minimum cooperativity. We show that the teleportation-based scheme maintains a significant rate advantage robustly for practical thermal noise and all values of cooperativity. We further investigate the performance in the transduction of complex quantum states such as cat states and Gottesman-Kitaev-Preskill (GKP) states and show that a higher fidelity can be achieved with the teleportation-based scheme. Our scheme significantly reduces the device requirement, and makes quantum transduction between microwave and optical frequencies feasible in the near future.
The coherent transduction between microwave and optical frequencies is critical to interconnect superconducting quantum processors over long distances. However, it is challenging to establish such a quantum interface with high efficiency and small added noise based on the standard direct conversion scheme. Here, we propose an electro-optic transduction system based on continuous-variable quantum teleportation. Reliable quantum-information transmission can be realized with an arbitrarily small cooperativity, in contrast to the direct conversion scheme, which requires a large minimum cooperativity. We show that the teleportation-based scheme maintains a significant rate advantage robustly for practical thermal noise and all values of cooperativity. We further investigate the performance in the transduction of complex quantum states such as cat states and Gottesman-Kitaev-Preskill (GKP) states and show that a higher fidelity can be achieved with the teleportation-based scheme. Our scheme significantly reduces the device requirement, and makes quantum transduction between microwave and optical frequencies feasible in the near future.
Quantum state transfer between microwave and optical frequencies is essential for connecting superconducting quantum circuits to optical systems and extending microwave quantum networks over long distances. However, establishing such a quantum interface is extremely challenging because the standard direct quantum transduction requires both high coupling efficiency and small added noise. We propose an entanglement-based scheme-generating microwave-optical entanglement and using it to transfer quantum states via quantum teleportation-which can bypass the stringent requirements in direct quantum transduction and is robust against loss errors. In addition, we propose and analyze a counterintuitive design-suppress the added noise by placing the device at a higher temperature environment-which can improve both the device quality factor and power handling capability. We systematically analyze the generation and verification of entangled microwave-optical-photon pairs. The parameter for entanglement verification favors the regime of cooperativity mismatch and can tolerate certain thermal noises. Our scheme is feasible given the latest advances on electro-optomechanics, and can be generalized to various physical systems.
Quantum transduction, which coherently converts quantum states between microwave and optical frequency domains, is a key technology for hybrid quantum architectures. Its performance, however, is fundamentally limited by thermal noise. Direct quantum transduction is particularly susceptible to noise and often fails to achieve positive quantum capacity. Entanglement-based quantum transduction, which realizes state conversion through quantum teleportation assisted by microwave-optical entanglement, is intrinsically more robust against thermal noise. However, generating sufficiently strong entanglement in a realistic thermal environment remains a major challenge. In this paper, we exploit correlated noise as a resource for quantum transduction. For direct quantum transduction, it is shown that the noise correlations give rise to controllable interference terms that substantially suppress the effective channel noise. For entanglement-based quantum transduction, the same correlations enhance the generation of microwave-optical entanglement, thereby improving the fidelity of teleportation-based conversion. As a result, both transduction protocols exhibit broad regions of positive quantum capacity over experimentally relevant ranges of cooperativity. We further discuss a possible physical mechanism for engineering the required noise correlations, providing theoretical guidance for experimental implementations. These results suggest that correlated noise can substantially relax the stringent cryogenic requirements for microwave-optical quantum transduction and facilitate the realization of practical hybrid quantum networks.
Quantum transduction refers to the coherent conversion between microwave and optical states, which can be achieved by quantum teleportation if given high-fidelity microwave-optical entanglement, namely entanglement-based quantum transduction. Reliable microwave-optical entanglement can be generated using various platforms. In this paper we base the discussion on a piezo-optomechanical system and make the teleportation induced conversion scheme more concrete in the framework of quantum channel theory. By comparing the quantum capacity between the entanglement-based conversion channel and the traditional direct quantum transduction channel, we show that the entanglement-based scheme indeed admits a positive transduction rate when the direct quantum transduction has zero quantum capacity. Given two piezo-optomechanical systems, we also investigate the generation of microwave-microwave entanglement from entanglement swapping within continuous-variable and discrete-variable settings, showing the potentials of directly connecting microwave quantum processors by microwave-microwave quantum teleportation.
Quantum transduction is an important building block for quantum networking. Although various platforms have been proposed, the efficiency of state-of-the-art systems is still way below the required threshold to provide robust quantum information transduction via a direct conversion approach. Increasing the efficiency via merely increasing the power of the pulsed pump will lead to heating that substantially reduces the repetition rate thus hinders the quantum information rate. In [Phys. Rev. Appl. 16, 064044 (2021)], we proposed a transduction paradigm based on continuous-variable quantum teleportation that shows a much higher rate in the low cooperativity region. While more recently [Phys. Rev. Res. 4, L042013 (2022)] proposed to utilize microwave squeezing to assist direct conversion. In this work, we explore the role of squeezing in the teleportation-based transduction protocol via evaluating quantum capacity lower and upper bounds. Our analyses include both microwave squeezing and optical squeezing, and provide a systematical benchmark between the continuous variable teleportation-based approach and continuous variable direct conversion approach. We show that the enhancement from single-mode squeezing on the teleportation-based approach is limited, in contrast to the direct conversion case. In the low cooperativity region required by reasonable repetition rate, the teleportation-based protocol provides larger quantum information rate and fidelity of state transfer. At the same time, it takes substantial squeezing for direct conversion to get close to the teleportation-based approach, at the risk of potentially introducing additional heating from the pump.
Quantum frequency conversion between superconducting (SC) microwave qubits and telecom optical photons is critical for long distance communication of networked SC quantum processors. While SC qubits operate at cryogenic temperatures to sustain their quantum coherence, converting them to the optical domain enables transferring the quantum states to room temperature and over long distances. For such a quantum state transduction process, several schemes have been investigated, including optomechanics, magnons, piezomechanics, and Pockels electro-optics (EO). The EO conversion approach is particularly attractive since it is broadband, low noise, mechanically and thermally stable (i.e., does not rely on freestanding structures), scalable (largescale integration of EO devices with superconducting circuits is possible), and tunable (e.g., using bias voltages). In this presentation we review our progress in an electro-optic based quantum transduction and discuss the promises and challenges.
Abstract Frequency conversion between microwave and optical photons is a key enabling technology to create links between superconducting quantum processors and to realize distributed quantum networks. We propose a microwave-optical transduction platform based on long-coherence time superconducting radio-frequency (SRF) cavities coupled to electro-optic optical cavities to mitigate the loss mechanisms that limit the attainment of high conversion efficiency. We optimize the microwave-optical field overlap and optical coupling losses in the design while achieving long microwave and optical photon lifetime at milli-Kelvin temperatures. This represents a significant enhancement of the transduction efficiency up to 50% under incoming pump power of 140 μW, which allows the conversion of few-photon quantum signals. Furthermore, this scheme exhibits high resolution for optically reading out the dispersive shift induced by a superconducting transmon qubit coupled to the SRF cavity. We also show that low microwave losses enhance the fidelity of heralded entanglement generation between two remote quantum systems. Finally, high precision in quantum sensing can be reached below the standard quantum limit.