Challenges
Datasets
Workspaces
Papers
Discussions
Leaderboard
Log inSign up
Challenges
Datasets
Workspaces
Papers
Discussions
Leaderboard
Blog
Job Board
Q3AS

© 2026 Aqora Quantum S.A.S.

TermsPrivacyLegal Notice

arXiv:2105.12860 · Physical Review Applied

Hybrid Exchange–Measurement-Based Qubit Operations in Semiconductor Double-Quantum-Dot Qubits

Matthew Brooks, Charles Tahan

Published Dec 8, 2021• 5 citations
arXivHTMLPDF

Abstract

Measurement-based quantum computing (MBQC) promises an alternative approach to quantum computation that has natural compatibility with error-correction codes at the cost of a polynomial increase in physical qubits. MBQC implementations have previously focused on photonic systems where two-qubit gates are difficult. On the other hand, semiconductor spin qubit systems offer fast two-qubit gates via the exchange interaction. To explore the benefits of MBQC on spin systems, two hybrid measurement-exchange schemes for full qubit control with semiconductor double-quantum-dot spin qubits are considered. Protocol 1 fully realizes the cluster-state approach to MBQC but requires singlet-triplet qubits in a magnetic field gradient. Protocol 2 implements a direct measurement-based replacement for more traditional gate-based encoded operations, without need for magnetic field gradients. Both protocols demonstrate full single- and two-qubit control through a combination of interqubit and intraqubit exchange and measurement onto the singlet-triplet basis. We show that both schemes suppress individual qubit spin-state leakage errors and offer fast gate times, up to known phase and Pauli corrections.

DOI
10.1103/physrevapplied.16.064019

Related papers

Achieving quantum computation with quantum dot spin qubits

Sebastian Mehl, David Peter Divincenzo

A two-level quantum system is the building block of a quantum computer. This pair of quantum states defines the computational unit of a quantum computer, and it is called a quantum bit or qubit in analogy to the bit that is the binary unit of a classical computer. The spin of a single electron naturally defines such a two-level quantum system. A quantum dot can be tuned to the single-electron regime, and an array of singly occupied quantum dots provides a multi-qubit register. This thesis describes the multielectron encoding of a spin qubit using a pair or a trio of quantum dots, and it analyzes the coherence properties and manipulation protocols of this system. The singlet-triplet qubit, coded using the singlet state and the spinless triplet state of a pair of singly occupied quantum dots, can be controlled all electrically when applying voltages to gates close to the quantum dot structure. Rapid, subnanosecond modifications of the double quantum dot's charge configuration have been realized successfully. A small magnetic field gradient across the double quantum dot enables universal qubit control. Two modifications of the normal singlet-triplet encoding are introduced. (1) The six-electron configuration of a double quantum dot encodes a singlet-triplet qubit in the same way as for the two-electron double quantum dot. Two electrons at each quantum dot are irrelevant for the qubit manipulations because they are paired in a singlet state; the remaining two electrons encode the qubit. The qubit's wave function is immune to charge noise at moderate out-of-plane magnetic fields. (2) A singlet-triplet qubit encoded using two quantum dots of different sizes has an orbital state degeneracy of the singlet state and the spinless triplet state at finite out-of-plane magnetic fields. Spin-orbit interactions lift this state degeneracy, while the magnitude of the state coupling is determined by the size difference of the QDs. This setup enables the manipulations of singlet-triplet qubits without the need for magnetic field gradients. Finally, two-qubit gates between singlet-triplet qubits are proposed that use mediated exchange interactions via one quantum state. These operations are well controlled and highly noise insensitive. Orbital interactions alone can control spin qubits coded in a three electron Hilbert space. For example, the exchange-only qubit is encoded using three singly occupied quantum dots. The exchange interactions of two quantum dot pairs need to be modified to manipulate this qubit. The noise sensitivity of the exchange-only qubit is discussed. Alternatively, a three-electron qubit at a double quantum dot can be operated when single electrons are transferred between the quantum dots. Fast, subnanosecond manipulations of the double quantum dot's charge configuration are required to realize single-qubit gates. A novel two-qubit pulse gate for the three-electron double quantum dot qubit is proposed.

•Jan 1, 2014•0 citations

Quantum computation by spin-parity measurements with encoded spin qubits

Matthew Brooks, Charles Tahan

Joint measurements of two-Pauli observables are powerful tools for both the control and protection of quantum information. By following a simple recipe for measurement choices, single- and two- qubit rotations using two-Pauli parity and single qubit measurements are guaranteed to be unitary while requiring only a single ancilla qubit. This language for measurement based quantum computing is shown to be directly applicable to encoded double quantum dot singlet-triplet spin qubits, by measuring spin-parity between dots from neighboring qubits. Along with exchange interaction, a complete, leakage free, measurement based gate set can be shown, up to a known Pauli correction. Both theoretically exact spin-parity measurements and experimentally demonstrated asymmetric spin-parity measurements are shown to be viable for achieving the proposed measurement based scheme, provided some extra leakage mitigating measurement steps. This method of spin qubit control offers a leakage suppressed, low resource overhead implementation of a measurement-based control that is viable on current spin qubit processor devices.

arXiv:2305.09727•Physical review. B./Physical review. B•Jul 25, 2023•4 citations

High-fidelity two-qubit gates of hybrid superconducting-semiconducting singlet-triplet qubits

Maria Spethmann, Stefano Bosco, Andrea Hofmann +2 more

Hybrid systems comprising superconducting and semiconducting materials are promising architectures for quantum computing. Superconductors induce long-range interactions between the spin degrees of freedom of semiconducting quantum dots. These interactions are widely anisotropic when the semiconductor material has strong spin-orbit interactions. We show that this anisotropy is tunable and enables fast and high-fidelity two-qubit gates between singlet-triplet (ST) spin qubits. Our design is immune to leakage of the quantum information into noncomputational states and removes always-on interactions between the qubits, thus resolving key open challenges for these architectures. Our ST qubits do not require additional technologically demanding components nor fine-tuning of parameters. They operate at low magnetic fields of a few millitesla and are fully compatible with superconductors. By suppressing systematic errors in realistic devices, we estimate infidelities below ${10}^{\ensuremath{-}3}$, which could pave the way toward large-scale hybrid superconducting-semiconducting quantum processors.

arXiv:2304.05086•Physical review. B./Physical review. B•Feb 7, 2024•28 citations

Exchange-based two-qubit gate for singlet-triplet qubits

Matthew P. Wardrop, Andrew C. Doherty

We analyze a simple exchange-based two-qubit gate for singlet-triplet qubits in gate-defined semiconductor quantum dots that can be implemented in a single exchange pulse. Excitations from the logical subspace are suppressed by a magnetic field gradient that causes spin-flip transitions to be non-energy-conserving. We show that the use of adiabatic pulses greatly reduces leakage processes comapred to square pulses. We also characterize the effect of charge noise on the entanglement fidelity of the gate both analytically and in simulations; demonstrating high entanglement fidelities for physically realistic experimental parameters. Specifically we find that it is possible to achieve fidelities and gate times that are comparable to single-qubit states using realistic magnetic field gradients.

arXiv:1405.5274•Physical Review B•Jul 21, 2014•45 citations

High-fidelity gates in quantum dot spin qubits

Teck Seng Koh, S. N. Coppersmith, Mark G. Friesen

Several logical qubits and quantum gates have been proposed for semiconductor quantum dots controlled by voltages applied to top gates. The different schemes can be difficult to compare meaningfully. Here we develop a theoretical framework to evaluate disparate qubit-gating schemes on an equal footing. We apply the procedure to two types of double-dot qubits: the singlet-triplet and the semiconducting quantum dot hybrid qubit. We investigate three quantum gates that flip the qubit state: a DC pulsed gate, an AC gate based on logical qubit resonance, and a gate-like process known as stimulated Raman adiabatic passage. These gates are all mediated by an exchange interaction that is controlled experimentally using the interdot tunnel coupling g and the detuning [Symbol: see text], which sets the energy difference between the dots. Our procedure has two steps. First, we optimize the gate fidelity (f) for fixed g as a function of the other control parameters; this yields an f(opt)(g) that is universal for different types of gates. Next, we identify physical constraints on the control parameters; this yields an upper bound f(max) that is specific to the qubit-gate combination. We show that similar gate fidelities (~99:5%) should be attainable for singlet-triplet qubits in isotopically purified Si, and for hybrid qubits in natural Si. Considerably lower fidelities are obtained for GaAs devices, due to the fluctuating magnetic fields ΔB produced by nuclear spins.

arXiv:1307.8406•Proceedings of the National Academy of Sciences•Nov 19, 2013•42 citations

Quantum Computing with Spin and Valley Qubits in Quantum Dots

Niklas Rohling

This thesis addresses the concept of quantum computing with semiconductor quantum dots. The basic unit of a quantum computer is a quantum mechanical two-level system, the so-called quantum bit (qubit). The qubit can be defined as the spin of an electron confined in a quantum dot or as a two-dimensional subspace of the Hilbert space for several spins. Some semiconductors have several minima in their conduction band, socalled valleys. A two-dimensional valley degree of freedom can also be considered as a qubit. In this thesis, quantum registers storing spin as well as valley qubits are described theoretically. Virtual hopping yields an exchange interaction between neighboring quantum dots, which reduces the energy of antisymmetric spin-valley states according to the Pauli principle. Considering the spin and the valley degrees of freedom of two electrons in neighboring quantum dots as qubits, the exchange interaction is a four-qubit interaction. In this thesis, it will be shown that it is, nevertheless, possible to generate a universal two-qubit gate for spin qubits or for valley qubits by combining the exchange interaction and individual single-qubit gates. The exchange interaction in this two-electron double quantum dot directly provides a universal two-qubit gate for one spin and one valley qubit as well. For this, the qubits are defined as suitable subspaces, spanned by the singlet and one triplet state of the spin and the valley states, respectively, Using those gates, arbitrary quantum operations can be performed for single-spin and single-valley qubits in the same quantum register, where in one double quantum dot the quantum states are restricted to the singlet-triplet subspace. While in this register single-spin and single-valley rotations are required, these gates are dispensable in a quantum register storing spin and valley singlet-triplet qubits. The single-qubit operations, in this case, can be provided by the exchange interaction and a gradient in the energy splitting of spin and valley states when the spin qubit is stored in a double quantum dot with spin degrees of freedom only and when the spin states in the double quantum dot which stores the valley qubit are polarized. For providing the two-qubit gate, the spin and the valley qubits need to be stored in the same double quantum dot. The crucial task for this register is to interchange the spin of a spin-only and a spin-valley quantum dot in order to switch between the single-qubit and the two-qubit operation mode. This interchanging of the spin can be achieved by a valley-depending virtual hopping between the quantum dots. Furthermore, echo sequences for a so-called exchange-only qubit are considered. An exchange-only qubit is defined as a subspace in a system of three electron spins in a triple quantum dot. An inhomogeneous magnetic field, which may be caused by nuclear spins in the semiconductor, can lead to decoherence and leakage, i.e., the state might leave the qubit subspace. Suppressing this effect by an echo sequence which consists of pulses interchanging neighboring spin states, so-called SWAP gates, was proposed. Controllability over these quantum operations is provided via the exchange interaction. In this thesis, the performance of different such sequences is investigated. The analysis shows that optimization strategies developed for single spin echoes can be adapted for the three spin system. The echo sequences can be different in their order of applied SWAP gates interchanging the spins in the first and second dots or in the second and third dots. The noise suppression performance depends slightly on this order of SWAP gates. For two spins in a double quantum dot a scheme for quantum state tomography is presented. The corresponding measurement operators are constructed from a set of mutually unbiased bases of the four-dimensional two-qubit Hilbert space. These measurements are represented by short sequences of no more than three elementary quantum gates and projective measurements by the well-established spin-to-charge conversion.

•Jan 1, 2015•0 citations
Measurement-based quantum computing (MBQC) promises an alternative approach to quantum computation that has natural compatibility with error-correction codes at the cost of a polynomial increase in physical qubits. MBQC implementations have previously focused on photonic systems where two-qubit gates are difficult. On the other hand, semiconductor spin qubit systems offer fast two-qubit gates via the exchange interaction. To explore the benefits of MBQC on spin systems, two hybrid measurement-exchange schemes for full qubit control with semiconductor double-quantum-dot spin qubits are considered. Protocol 1 fully realizes the cluster-state approach to MBQC but requires singlet-triplet qubits in a magnetic field gradient. Protocol 2 implements a direct measurement-based replacement for more traditional gate-based encoded operations, without need for magnetic field gradients. Both protocols demonstrate full single- and two-qubit control through a combination of interqubit and intraqubit exchange and measurement onto the singlet-triplet basis. We show that both schemes suppress individual qubit spin-state leakage errors and offer fast gate times, up to known phase and Pauli corrections.
A two-level quantum system is the building block of a quantum computer. This pair of quantum states defines the computational unit of a quantum computer, and it is called a quantum bit or qubit in analogy to the bit that is the binary unit of a classical computer. The spin of a single electron naturally defines such a two-level quantum system. A quantum dot can be tuned to the single-electron regime, and an array of singly occupied quantum dots provides a multi-qubit register. This thesis describes the multielectron encoding of a spin qubit using a pair or a trio of quantum dots, and it analyzes the coherence properties and manipulation protocols of this system. The singlet-triplet qubit, coded using the singlet state and the spinless triplet state of a pair of singly occupied quantum dots, can be controlled all electrically when applying voltages to gates close to the quantum dot structure. Rapid, subnanosecond modifications of the double quantum dot's charge configuration have been realized successfully. A small magnetic field gradient across the double quantum dot enables universal qubit control. Two modifications of the normal singlet-triplet encoding are introduced. (1) The six-electron configuration of a double quantum dot encodes a singlet-triplet qubit in the same way as for the two-electron double quantum dot. Two electrons at each quantum dot are irrelevant for the qubit manipulations because they are paired in a singlet state; the remaining two electrons encode the qubit. The qubit's wave function is immune to charge noise at moderate out-of-plane magnetic fields. (2) A singlet-triplet qubit encoded using two quantum dots of different sizes has an orbital state degeneracy of the singlet state and the spinless triplet state at finite out-of-plane magnetic fields. Spin-orbit interactions lift this state degeneracy, while the magnitude of the state coupling is determined by the size difference of the QDs. This setup enables the manipulations of singlet-triplet qubits without the need for magnetic field gradients. Finally, two-qubit gates between singlet-triplet qubits are proposed that use mediated exchange interactions via one quantum state. These operations are well controlled and highly noise insensitive. Orbital interactions alone can control spin qubits coded in a three electron Hilbert space. For example, the exchange-only qubit is encoded using three singly occupied quantum dots. The exchange interactions of two quantum dot pairs need to be modified to manipulate this qubit. The noise sensitivity of the exchange-only qubit is discussed. Alternatively, a three-electron qubit at a double quantum dot can be operated when single electrons are transferred between the quantum dots. Fast, subnanosecond manipulations of the double quantum dot's charge configuration are required to realize single-qubit gates. A novel two-qubit pulse gate for the three-electron double quantum dot qubit is proposed.
Joint measurements of two-Pauli observables are powerful tools for both the control and protection of quantum information. By following a simple recipe for measurement choices, single- and two- qubit rotations using two-Pauli parity and single qubit measurements are guaranteed to be unitary while requiring only a single ancilla qubit. This language for measurement based quantum computing is shown to be directly applicable to encoded double quantum dot singlet-triplet spin qubits, by measuring spin-parity between dots from neighboring qubits. Along with exchange interaction, a complete, leakage free, measurement based gate set can be shown, up to a known Pauli correction. Both theoretically exact spin-parity measurements and experimentally demonstrated asymmetric spin-parity measurements are shown to be viable for achieving the proposed measurement based scheme, provided some extra leakage mitigating measurement steps. This method of spin qubit control offers a leakage suppressed, low resource overhead implementation of a measurement-based control that is viable on current spin qubit processor devices.
Hybrid systems comprising superconducting and semiconducting materials are promising architectures for quantum computing. Superconductors induce long-range interactions between the spin degrees of freedom of semiconducting quantum dots. These interactions are widely anisotropic when the semiconductor material has strong spin-orbit interactions. We show that this anisotropy is tunable and enables fast and high-fidelity two-qubit gates between singlet-triplet (ST) spin qubits. Our design is immune to leakage of the quantum information into noncomputational states and removes always-on interactions between the qubits, thus resolving key open challenges for these architectures. Our ST qubits do not require additional technologically demanding components nor fine-tuning of parameters. They operate at low magnetic fields of a few millitesla and are fully compatible with superconductors. By suppressing systematic errors in realistic devices, we estimate infidelities below ${10}^{\ensuremath{-}3}$, which could pave the way toward large-scale hybrid superconducting-semiconducting quantum processors.
We analyze a simple exchange-based two-qubit gate for singlet-triplet qubits in gate-defined semiconductor quantum dots that can be implemented in a single exchange pulse. Excitations from the logical subspace are suppressed by a magnetic field gradient that causes spin-flip transitions to be non-energy-conserving. We show that the use of adiabatic pulses greatly reduces leakage processes comapred to square pulses. We also characterize the effect of charge noise on the entanglement fidelity of the gate both analytically and in simulations; demonstrating high entanglement fidelities for physically realistic experimental parameters. Specifically we find that it is possible to achieve fidelities and gate times that are comparable to single-qubit states using realistic magnetic field gradients.
Several logical qubits and quantum gates have been proposed for semiconductor quantum dots controlled by voltages applied to top gates. The different schemes can be difficult to compare meaningfully. Here we develop a theoretical framework to evaluate disparate qubit-gating schemes on an equal footing. We apply the procedure to two types of double-dot qubits: the singlet-triplet and the semiconducting quantum dot hybrid qubit. We investigate three quantum gates that flip the qubit state: a DC pulsed gate, an AC gate based on logical qubit resonance, and a gate-like process known as stimulated Raman adiabatic passage. These gates are all mediated by an exchange interaction that is controlled experimentally using the interdot tunnel coupling g and the detuning [Symbol: see text], which sets the energy difference between the dots. Our procedure has two steps. First, we optimize the gate fidelity (f) for fixed g as a function of the other control parameters; this yields an f(opt)(g) that is universal for different types of gates. Next, we identify physical constraints on the control parameters; this yields an upper bound f(max) that is specific to the qubit-gate combination. We show that similar gate fidelities (~99:5%) should be attainable for singlet-triplet qubits in isotopically purified Si, and for hybrid qubits in natural Si. Considerably lower fidelities are obtained for GaAs devices, due to the fluctuating magnetic fields ΔB produced by nuclear spins.
This thesis addresses the concept of quantum computing with semiconductor quantum dots. The basic unit of a quantum computer is a quantum mechanical two-level system, the so-called quantum bit (qubit). The qubit can be defined as the spin of an electron confined in a quantum dot or as a two-dimensional subspace of the Hilbert space for several spins. Some semiconductors have several minima in their conduction band, socalled valleys. A two-dimensional valley degree of freedom can also be considered as a qubit. In this thesis, quantum registers storing spin as well as valley qubits are described theoretically. Virtual hopping yields an exchange interaction between neighboring quantum dots, which reduces the energy of antisymmetric spin-valley states according to the Pauli principle. Considering the spin and the valley degrees of freedom of two electrons in neighboring quantum dots as qubits, the exchange interaction is a four-qubit interaction. In this thesis, it will be shown that it is, nevertheless, possible to generate a universal two-qubit gate for spin qubits or for valley qubits by combining the exchange interaction and individual single-qubit gates. The exchange interaction in this two-electron double quantum dot directly provides a universal two-qubit gate for one spin and one valley qubit as well. For this, the qubits are defined as suitable subspaces, spanned by the singlet and one triplet state of the spin and the valley states, respectively, Using those gates, arbitrary quantum operations can be performed for single-spin and single-valley qubits in the same quantum register, where in one double quantum dot the quantum states are restricted to the singlet-triplet subspace. While in this register single-spin and single-valley rotations are required, these gates are dispensable in a quantum register storing spin and valley singlet-triplet qubits. The single-qubit operations, in this case, can be provided by the exchange interaction and a gradient in the energy splitting of spin and valley states when the spin qubit is stored in a double quantum dot with spin degrees of freedom only and when the spin states in the double quantum dot which stores the valley qubit are polarized. For providing the two-qubit gate, the spin and the valley qubits need to be stored in the same double quantum dot. The crucial task for this register is to interchange the spin of a spin-only and a spin-valley quantum dot in order to switch between the single-qubit and the two-qubit operation mode. This interchanging of the spin can be achieved by a valley-depending virtual hopping between the quantum dots. Furthermore, echo sequences for a so-called exchange-only qubit are considered. An exchange-only qubit is defined as a subspace in a system of three electron spins in a triple quantum dot. An inhomogeneous magnetic field, which may be caused by nuclear spins in the semiconductor, can lead to decoherence and leakage, i.e., the state might leave the qubit subspace. Suppressing this effect by an echo sequence which consists of pulses interchanging neighboring spin states, so-called SWAP gates, was proposed. Controllability over these quantum operations is provided via the exchange interaction. In this thesis, the performance of different such sequences is investigated. The analysis shows that optimization strategies developed for single spin echoes can be adapted for the three spin system. The echo sequences can be different in their order of applied SWAP gates interchanging the spins in the first and second dots or in the second and third dots. The noise suppression performance depends slightly on this order of SWAP gates. For two spins in a double quantum dot a scheme for quantum state tomography is presented. The corresponding measurement operators are constructed from a set of mutually unbiased bases of the four-dimensional two-qubit Hilbert space. These measurements are represented by short sequences of no more than three elementary quantum gates and projective measurements by the well-established spin-to-charge conversion.