Optical cavities are an enabling technology of modern quantum science: From their essential role in the operation of lasers to applications as flywheels in atomic clocks and interaction-enhancing components in quantum optics experiments, developing a quantitative understanding of the mode shapes and energies of optical cavities has been crucial for the growth of the field. Nonetheless, the standard treatment using paraxial quadratic optics fails to capture the influence of optical aberrations present in modern cavities with high finesse, small waist, and/or many degenerate modes. In this work, we compute the mode spectrum of optical resonators, allowing for both nonparaxial beam propagation and beyond-quadratic mirrors and lenses. Generalizing prior works, we develop a complete theory of resonator aberrations, including intracavity lenses, nonplanar geometries, and arbitrary mirror forms. Harnessing these tools, we reconcile the near absence of aberration in the work of Schine et al. [N. Schine et al., Nature (London) 534, 671 (2016)] with the strongly evident aberrations in the seemingly similar cavity of Clark et al. [L. W. Clark et al., Nature (London) 582, 41 (2020)]. We further validate our approach by comparison to a family of nonplanar lens cavities realized in the laboratory, finding good quantitative agreement. This work opens prospects for cavities with smaller waists and more degenerate modes.
Optical cavities are an enabling technology of modern quantum science: From their essential role in the operation of lasers to applications as flywheels in atomic clocks and interaction-enhancing components in quantum optics experiments, developing a quantitative understanding of the mode shapes and energies of optical cavities has been crucial for the growth of the field. Nonetheless, the standard treatment using paraxial quadratic optics fails to capture the influence of optical aberrations present in modern cavities with high finesse, small waist, and/or many degenerate modes. In this work, we compute the mode spectrum of optical resonators, allowing for both nonparaxial beam propagation and beyond-quadratic mirrors and lenses. Generalizing prior works, we develop a complete theory of resonator aberrations, including intracavity lenses, nonplanar geometries, and arbitrary mirror forms. Harnessing these tools, we reconcile the near absence of aberration in the work of Schine et al. [N. Schine et al., Nature (London) 534, 671 (2016)] with the strongly evident aberrations in the seemingly similar cavity of Clark et al. [L. W. Clark et al., Nature (London) 582, 41 (2020)]. We further validate our approach by comparison to a family of nonplanar lens cavities realized in the laboratory, finding good quantitative agreement. This work opens prospects for cavities with smaller waists and more degenerate modes.
Summary form only given. The development of atom interferometry in the last few decades has led to high precision measurements of inertial effects and tests of fundamental physics [1]. New methods for higher sensitivity atom interferometers (AIs) are being explored, in particular the interrogation of atoms with optical cavities. The benefits of optical cavities would be higher optical power allowing large momentum transfer beam splitters, and possibly cleaner and controlled phase profiles [2]. However high sensitivity AIs require long interrogation times, which, combined with cold atom cloud expansion, bring the challenges of large centimetric waists in cavities. We propose an optical resonator composed of a convergent lens with two flat mirrors at its focal planes as shown on figure 1 [3]. When perfectly aligned any input field can be resonating inside. Especially, when a Gaussian beam, with waist w0' on the first mirror, is inputted to the cavity, the lens conjugates it to the second mirror with waist w0= λf/πw0'. This cavity is marginally stable and exhibits a half degenerate behaviour: all modes resonate at the same frequencies, odd and even modes being separated by half a free spectral range. Thus it does not have strong mode cleaning properties but it is able to magnify any input field. When misaligned, this cavity goes out of its degenerate behaviour and the circulating field begins to degrade due to mode filtering. A numerical study of the cavity behaviour, using an ABCD transfer matrix formalism, showed that typical controllable misalignments of a few micrometres would not be critical for atom interrogation. Further degradations due to surface defects and tilts are being investigated.
Optical cavities are a foundational technology for controlling light-matter interactions. While interfacing a single cavity to either an atom or ensemble has become a standard tool, the advent of single-atom control in large atomic arrays has spurred interest in a new frontier of “many-cavity QED,” featuring many independent resonators capable of separately addressing individual quantum emitters. In this fast-evolving landscape, the was recently introduced—employing free space intracavity optics to engineer a two-dimensional array of tightly spaced cavity TEM 00 modes with wavelength-scale waists, ideally suited for interfacing with atom arrays. Here, we realize the next generation of this architecture, achieving hundreds of degenerate cavity modes with improved, uniform finesse, and explore the technical features of the system which will enable further scalability. In particular, we study imperfections, including optical aberrations, field of view constraints, array nondegeneracies, and losses from optical elements. We identify the sensitivity to these various factors and exposit the control knobs and techniques necessary to align and operate the system in a stable manner. Ultimately, we lay out a pathway toward operation with tens of thousands of independent cavities while maintaining compatibility with existing atom arrays, paving the way to myriad applications including highly parallelized remote entanglement generation, fast and nondestructive midcircuit readout, and the implementation of hybrid atom-photon Hamiltonians.
Optical cavities have found widespread use in interfacing to quantum emitters. Concerns about backreflection and resulting loss, however, have largely prevented the placement of optics such as lenses or modulators within high-finesse cavities. In this work, we demonstrate a million-fold suppression of backreflections from lenses within a twisted optical cavity. We achieve this by quantitatively exploring backscatter in Fabry–Perot resonators, separating the effect into three physical sectors: polarization, mode envelope, and transverse mode profile. We describe the impact of each of these sectors and demonstrate how to minimize backreflections within each. This culminates in measured effective reflectivities below the part-per-billion level for the fundamental mode. Additionally, we show that beams carrying orbital angular momentum experience up to 10 4 times additional suppression, limited only by the density of states of other cavity modes. The understanding and techniques described in this work could expand the utility of optical resonators in topics ranging from quantum optics and cavity quantum electrodynamics to ring resonators and laser gyroscopes.
In the near-concentric regime, the transverse modes of an optical cavity have small mode volumes with a beam waist on the order of the atomic cross section. This shows potential for strong interaction between single atoms and light, which is a key component in distributed quantum computing architectures [1] . Furthermore, with centimetresized near-concentric cavities, the frequency spacing of the transverse modes ranges from tens of MHz to a GHz, matching well with the hyperfine or the Zeeman level splitting of an atom [2] . This near-degeneracy in resonant frequencies close to the critical point allows to explore the physics of atomic nonlinearities with multiple photonic modes strongly coupled to different hyperfine or magnetic energy levels of a quantum emitter.
The interaction of light with matter is at the heart of quantum optics, which itself enables insight into the fundamental aspects of quantum mechanics. First experimental access to this research field has been realized by coupling atoms to light. Here, the transition between discrete energy states of the atom is associated with the absorption and emission of a photon, a single quantum of the electromagnetic field. As a central aspect of quantum optics, the light-emitter interaction can be significantly enhanced by placing the emitter in optical cavity that is on resonance with the emitter. In recent years, this has led to a rapidly evolving research field known as cavity quantum electrodynamics (CQED). In CQED two different regimes are distinguished: the strong and the weak coupling regimes. In the strong coupling regime, the emitted photon is reflected from the cavity mirrors and eventually reabsorbed by the emitter. In contrast, the weak coupling regime describes the irreversible emission, where the photon leaks out of the cavity before it can be reabsorbed. Both the weak and strong coupling regimes enabled fundamental experiments for a better understanding of quantum optical phenomena. \n \n \n \nCQED grants access to the quantum world and hence offers potentially revolutionizing applications, particularly in the field of quantum information processing. A central aspect for the successful implementation of quantum applications is the system's scalability. Unfortunately, placing atoms deterministically inside a cavity remains technologically elaborate and hence minimizes the prospect of scaling a atom-CQED system. \n \nA possibility to address this issue is to implement CQED in the solid state, where sophisticated fabrication strategies allow miniaturization and scalability of the system. Particularly the development of self-assembled quantum dots (QD) in semiconductors represent a promising route. QDs can be considered as artificial atoms that mimic the atomic two-level system. These structures interact strongly with light and therefore have the potential for replacing atoms in CQED. As a central advantage, QDs are naturally trapped, which greatly simplifies the deterministic incorporation into the cavity. \n \nIn recent years, many efforts have been made to couple self-assembled QDs to microcavities. Generally, the successful implementation of CQED requires a cavity with a high quality factor Q and a low mode volume. In a majority of the approaches, the high Q/small mode volume cavities were monolithically defined around the QD, embedding the QD at a fixed position inside the cavity. Both the weak and strong coupling regimes have been reached with these systems. However, for future applications they suffer from several disadvantages. The fixed position of the QD inside the cavity minimizes the prospects for spectral tunability and spatial positioning the QD inside the cavity. Furthermore, prospects for further increasing of the cavity Q-factor and minimization of the mode volume remain limited in these systems. \n \nIn this thesis the mentioned disadvantages are addressed by developing a fully tunable miniaturized Fabry-Pérot microcavity with low mode volume. The design enables both spatial positioning of the emitter inside the cavity and spectral tunability. Successful coupling of a single QD to the microcavity is demonstrated including the strong coupling regime. Further a new approach to decrease the cavity mode volume is presented, where we demonstrate weak coupling is achieved
Optical cavities operating in the near-concentric regime are the fundamental tools to perform high precision experiments like cavity QED applications. A strong focusing regime unfortunately is prone to excite higher-order modes. Higher-order mode excitation is challenging to avoid for the realistic strong focusing cavities, and if these modes are closely spaced, overall cavity linewidth gets significantly broadened. In this study, a computational method alongside the experiment is provided for the optical mode decomposition into cavity eigenmodes with justified approximations. It is shown that it is possible to recreate the intensity and spectral profile of the cavity transmission, with the provided model. As a result, a more complete treatment of the realistic near-concentric cavities can be done.