Challenges
Datasets
Workspaces
Papers
Discussions
Leaderboard
Log inSign up
Challenges
Datasets
Workspaces
Papers
Discussions
Leaderboard
Blog
Job Board
Q3AS

© 2026 Aqora Quantum S.A.S.

TermsPrivacyLegal Notice

arXiv:2104.03511 · Physical Review Applied

Parametric-Resonance Entangling Gates with a Tunable Coupler

Eyob Alebachew Sete, Nicolas Didier, Angela Q. Chen, Shobhan Kulshreshtha, Riccardo Manenti, Stefano Poletto

Published Aug 27, 2021• 100 citations
arXivHTMLPDF

Abstract

High-fidelity parametric gates have been demonstrated with superconducting qubits via rf flux modulation of the qubit frequency. The modulation however leads to renormalization of the bare qubit-qubit coupling, thereby reducing the gate speed. Here, we realize a parametric-resonance gate, which is activated by bringing the average frequency of the modulated qubit in resonance with a static-frequency qubit while approximately retaining the bare qubit-qubit coupling. The activation of parametric-resonance gates does not depend on the frequency of modulation, allowing us to choose the modulation frequencies and avoid frequency collisions. Moreover, we show that this approach is compatible with tunable coupler architectures, which reduce always-on residual couplings. Using these techniques, we demonstrate iswap and controlled-$Z$ gates between two qubits coupled via a tunable coupler with average process fidelities as high as $99.3\mathrm{%}$ and $97.9\mathrm{%}$, respectively. The flexibility in activating parametric-resonance gates combined with a tunable coupler architecture provides a pathway for building large-scale quantum computers.

DOI
10.1103/physrevapplied.16.024050

Related papers

Superconducting architecture demonstrating fast, tunable high-fidelity CZ gates with parametric control of ZZ coupling

X.Y. Jin, Z. Parrott, K. Cicak +6 more

Future quantum information processors require tunable coupling architectures that can produce high-fidelity logical gates between two or more qubits. Parametric coupling is a powerful technique for generating tunable interactions between many qubits. Here, we present a highly flexible parametric coupling scheme with superconducting qubits that provides complete removal of residual Z Z coupling and the implementation of driven SWAP or SWAP-free controlled- Z ( C Z ) gates. Our fully integrated two-dimensional on-chip coupler design is only weakly flux tunable, cancels static linear coupling between the qubits, avoids internal coupler dynamics or excitations, and is extensible to multiqubit circuit-QED systems. Exploring gate fidelity versus gate duration allows us to maximize two-qubit gate fidelity, while providing insights into possible error sources for these gates. Randomized benchmarking over several hours reveals that the parametric SWAP C Z gate achieves an average fidelity of 99.44 ± 0.09 % in a gate duration of 70 ns and that a dispersively driven parametric SWAP-free C Z gate attains an average fidelity of 99.47 ± 0.07 % in only 30 ns. The fidelity remained above this value for over 8 h and peaked twice with a maximum of 99.67 ± 0.14 % . Overall, our parametric approach combines versatility, precision, speed, and high performance in one compact coupler design.

arXiv:2305.02907•Physical Review Applied•Oct 21, 2025•15 citations

Fast parametric two-qubit gate for highly detuned fixed-frequency superconducting qubits using a double-transmon coupler

Kentaro Kubo, Hayato Goto

High-performance two-qubit gates have been reported with superconducting qubits coupled via a single-transmon coupler (STC). Most of them are implemented for qubits with a small detuning since reducing residual ZZ coupling for highly detuned qubits by an STC is challenging. In terms of the frequency crowding and crosstalk, however, highly detuned qubits are desirable. Here, we numerically demonstrate a high-performance parametric gate for highly detuned fixed-frequency qubits using a recently proposed tunable coupler called a double-transmon coupler (DTC). Applying an ac flux pulse, we can perform a maximally entangling universal gate (iSWAP) with an average fidelity over 99.99% and a short gate time of about 24 ns. This speed is comparable to resonance-based gates for slightly detuned tunable qubits. Moreover, using a dc flux pulse alternatively, we can achieve another kind of entangling gate called a CZ gate with an average fidelity over 99.99% and a gate time of about 18 ns. Given the flexibility and feasible settings, we can expect that the DTC will contribute towards realizing a high-performance quantum computer in the near future.

arXiv:2212.06979•Applied Physics Letters•Feb 6, 2023•21 citations

Parametric Multielement Coupling Architecture for Coherent and Dissipative Control of Superconducting Qubits

Gerhard B. P. Huber, Federico A. Roy, L. Koch +20 more

As systems for quantum computing keep growing in size and number of qubits, challenges in scaling the control capabilities are becoming increasingly relevant. Efficient schemes to simultaneously mediate coherent interactions between multiple quantum systems and to reduce decoherence errors can minimize the control overhead in next-generation quantum processors. Here, we present a superconducting qubit architecture based on tunable parametric interactions to perform two-qubit gates, reset, leakage recovery, and to read out the qubits. In this architecture, parametrically driven multielement couplers selectively couple qubits to resonators and neighboring qubits, according to the frequency of the drive. We consider a system with two qubits and one readout resonator interacting via a single coupling circuit and experimentally demonstrate a controlled- Z gate with a fidelity of 98.30 ± 0.23 % , a reset operation that unconditionally prepares the qubit ground state with a fidelity of 99.80 ± 0.02 % and a leakage recovery operation with a 98.5 ± 0.3 % success probability. Furthermore, we implement a parametric readout with a single-shot assignment fidelity of 88.0 ± 0.4 % . These operations are all realized using a single tunable coupler and a statically decoupled resonator, demonstrating the experimental feasibility of the proposed architecture and its potential for reducing the system complexity in scalable quantum processors.

arXiv:2403.02203•PRX Quantum•Jun 11, 2025•20 citations

Parametrically Activated Entangling Gates Using Transmon Qubits

Sam Caldwell, Nicolas Didier, Colm A. Ryan +59 more

A central challenge in building a scalable quantum computer with superconducting qubits is the execution of high-fidelity two-qubit gates in the presence of many resonant elements. As more elements are added to the architecture, and as the multiplicity of their couplings grows, the design's frequency space becomes crowded, and performance suffers. The authors present a way to address this difficulty: selective activation of interactions between transmon qubits of fixed frequency and those of tunable frequency. This activation depends on both the amplitude and frequency of modulation, and using the amplitude as an additional condition for resonance alleviates frequency crowding.

arXiv:1706.06562•Physical Review Applied•Sep 24, 2018•214 citations

A double-resonator coupler for high-fidelity two-qubit gates between superconducting qubits

Seunghyeon Jin, Seungha Woo, Shinyoung Hwang +6 more

Tunable couplers have enabled two-qubit gate fidelities in superconducting quantum processors to approach $99.9\%$, yet simultaneously suppressing residual interactions and maintaining flexible qubit-frequency allocation remain central challenges for scaling. Here, we propose a double-resonator coupler (DRC) consisting of two resonators interconnected by a single Josephson junction and a capacitor. The hybridized resonator modes provide two mediated exchange paths whose interference controls the qubit-qubit interaction. The DRC enables complete cancellation of residual $ZZ$ interaction for qubit-qubit detunings well outside the straddling regime, even without direct inter-qubit capacitance, thereby relaxing constraints on frequency allocation and qubit placement. Away from the idle point, the same circuit provides a strong $ZZ$ interaction of approximately $70\,\mathrm{MHz}$, enabling a $20\,\mathrm{ns}$ controlled-Z gate with simulated coherent infidelity below $10^{-5}$. These results establish the DRC as a flexible single-junction coupler architecture for high-fidelity superconducting quantum processors.

quant-pharXiv:2609.05222•Sep 7, 2026•0 citations

Parametric $\mathrm{CZ}$ Gates in a Tunable Tripod Architecture with Fixed-Frequency Superconducting Qubits

Chanpyo Kim, Hansol Kim, Jeongsoo Kang +1 more

Efficient implementation of the operations required for quantum error correction in superconducting quantum computers requires high gate fidelity, adequate qubit connectivity, and selective control of interactions. Sharing a single coupler among multiple qubits can improve connectivity, but also requires accounting for its effects on qubits outside the target pair. In this work, we numerically investigate the feasibility of implementing parametric-resonance $\mathrm{CZ}$ gates in a tunable tripod structure consisting of three fixed-frequency transmon qubits connected to a single tunable coupler. We modulate the external flux applied to the coupler and optimize the pulse parameters for each qubit pair to construct $\mathrm{CZ}_{01}$, $\mathrm{CZ}_{02}$, and $\mathrm{CZ}_{12}$ gates. We calculate the time evolution of a Hamiltonian that includes three energy levels for each circuit element and evaluate gate fidelity and leakage after virtual Z correction. The fidelities obtained for the target-pair computational blocks, whose input and output basis states have both the coupler and spectator qubit in their ground states, are 0.9943, 0.9834, and 0.9907, respectively. We also find that population preservation at the end of the gate depends on the initial state of the spectator qubit. These results demonstrate the possibility of constructing $\mathrm{CZ}$ operations for each qubit pair through flux modulation of a shared coupler while maintaining fixed data-qubit frequencies. They also highlight the need to evaluate performance and optimize control over the full computational space, including the spectator qubit.

arXiv:2611.09105•Nov 6, 2026•0 citations
High-fidelity parametric gates have been demonstrated with superconducting qubits via rf flux modulation of the qubit frequency. The modulation however leads to renormalization of the bare qubit-qubit coupling, thereby reducing the gate speed. Here, we realize a parametric-resonance gate, which is activated by bringing the average frequency of the modulated qubit in resonance with a static-frequency qubit while approximately retaining the bare qubit-qubit coupling. The activation of parametric-resonance gates does not depend on the frequency of modulation, allowing us to choose the modulation frequencies and avoid frequency collisions. Moreover, we show that this approach is compatible with tunable coupler architectures, which reduce always-on residual couplings. Using these techniques, we demonstrate iswap and controlled-ZZZ gates between two qubits coupled via a tunable coupler with average process fidelities as high as 99.3\mathrm{%} and 97.9\mathrm{%}, respectively. The flexibility in activating parametric-resonance gates combined with a tunable coupler architecture provides a pathway for building large-scale quantum computers.
Future quantum information processors require tunable coupling architectures that can produce high-fidelity logical gates between two or more qubits. Parametric coupling is a powerful technique for generating tunable interactions between many qubits. Here, we present a highly flexible parametric coupling scheme with superconducting qubits that provides complete removal of residual Z Z coupling and the implementation of driven SWAP or SWAP-free controlled- Z ( C Z ) gates. Our fully integrated two-dimensional on-chip coupler design is only weakly flux tunable, cancels static linear coupling between the qubits, avoids internal coupler dynamics or excitations, and is extensible to multiqubit circuit-QED systems. Exploring gate fidelity versus gate duration allows us to maximize two-qubit gate fidelity, while providing insights into possible error sources for these gates. Randomized benchmarking over several hours reveals that the parametric SWAP C Z gate achieves an average fidelity of 99.44 ± 0.09 % in a gate duration of 70 ns and that a dispersively driven parametric SWAP-free C Z gate attains an average fidelity of 99.47 ± 0.07 % in only 30 ns. The fidelity remained above this value for over 8 h and peaked twice with a maximum of 99.67 ± 0.14 % . Overall, our parametric approach combines versatility, precision, speed, and high performance in one compact coupler design.
High-performance two-qubit gates have been reported with superconducting qubits coupled via a single-transmon coupler (STC). Most of them are implemented for qubits with a small detuning since reducing residual ZZ coupling for highly detuned qubits by an STC is challenging. In terms of the frequency crowding and crosstalk, however, highly detuned qubits are desirable. Here, we numerically demonstrate a high-performance parametric gate for highly detuned fixed-frequency qubits using a recently proposed tunable coupler called a double-transmon coupler (DTC). Applying an ac flux pulse, we can perform a maximally entangling universal gate (iSWAP) with an average fidelity over 99.99% and a short gate time of about 24 ns. This speed is comparable to resonance-based gates for slightly detuned tunable qubits. Moreover, using a dc flux pulse alternatively, we can achieve another kind of entangling gate called a CZ gate with an average fidelity over 99.99% and a gate time of about 18 ns. Given the flexibility and feasible settings, we can expect that the DTC will contribute towards realizing a high-performance quantum computer in the near future.
As systems for quantum computing keep growing in size and number of qubits, challenges in scaling the control capabilities are becoming increasingly relevant. Efficient schemes to simultaneously mediate coherent interactions between multiple quantum systems and to reduce decoherence errors can minimize the control overhead in next-generation quantum processors. Here, we present a superconducting qubit architecture based on tunable parametric interactions to perform two-qubit gates, reset, leakage recovery, and to read out the qubits. In this architecture, parametrically driven multielement couplers selectively couple qubits to resonators and neighboring qubits, according to the frequency of the drive. We consider a system with two qubits and one readout resonator interacting via a single coupling circuit and experimentally demonstrate a controlled- Z gate with a fidelity of 98.30 ± 0.23 % , a reset operation that unconditionally prepares the qubit ground state with a fidelity of 99.80 ± 0.02 % and a leakage recovery operation with a 98.5 ± 0.3 % success probability. Furthermore, we implement a parametric readout with a single-shot assignment fidelity of 88.0 ± 0.4 % . These operations are all realized using a single tunable coupler and a statically decoupled resonator, demonstrating the experimental feasibility of the proposed architecture and its potential for reducing the system complexity in scalable quantum processors.
A central challenge in building a scalable quantum computer with superconducting qubits is the execution of high-fidelity two-qubit gates in the presence of many resonant elements. As more elements are added to the architecture, and as the multiplicity of their couplings grows, the design's frequency space becomes crowded, and performance suffers. The authors present a way to address this difficulty: selective activation of interactions between transmon qubits of fixed frequency and those of tunable frequency. This activation depends on both the amplitude and frequency of modulation, and using the amplitude as an additional condition for resonance alleviates frequency crowding.
Tunable couplers have enabled two-qubit gate fidelities in superconducting quantum processors to approach 99.9%99.9\%99.9%, yet simultaneously suppressing residual interactions and maintaining flexible qubit-frequency allocation remain central challenges for scaling. Here, we propose a double-resonator coupler (DRC) consisting of two resonators interconnected by a single Josephson junction and a capacitor. The hybridized resonator modes provide two mediated exchange paths whose interference controls the qubit-qubit interaction. The DRC enables complete cancellation of residual ZZZZZZ interaction for qubit-qubit detunings well outside the straddling regime, even without direct inter-qubit capacitance, thereby relaxing constraints on frequency allocation and qubit placement. Away from the idle point, the same circuit provides a strong ZZZZZZ interaction of approximately 70 MHz70\,\mathrm{MHz}70MHz, enabling a 20 ns20\,\mathrm{ns}20ns controlled-Z gate with simulated coherent infidelity below 10−510^{-5}10−5. These results establish the DRC as a flexible single-junction coupler architecture for high-fidelity superconducting quantum processors.
Parametric CZ\mathrm{CZ}CZ Gates in a Tunable Tripod Architecture with Fixed-Frequency Superconducting Qubits
Efficient implementation of the operations required for quantum error correction in superconducting quantum computers requires high gate fidelity, adequate qubit connectivity, and selective control of interactions. Sharing a single coupler among multiple qubits can improve connectivity, but also requires accounting for its effects on qubits outside the target pair. In this work, we numerically investigate the feasibility of implementing parametric-resonance CZ\mathrm{CZ}CZ gates in a tunable tripod structure consisting of three fixed-frequency transmon qubits connected to a single tunable coupler. We modulate the external flux applied to the coupler and optimize the pulse parameters for each qubit pair to construct CZ01\mathrm{CZ}_{01}CZ01​, CZ02\mathrm{CZ}_{02}CZ02​, and CZ12\mathrm{CZ}_{12}CZ12​ gates. We calculate the time evolution of a Hamiltonian that includes three energy levels for each circuit element and evaluate gate fidelity and leakage after virtual Z correction. The fidelities obtained for the target-pair computational blocks, whose input and output basis states have both the coupler and spectator qubit in their ground states, are 0.9943, 0.9834, and 0.9907, respectively. We also find that population preservation at the end of the gate depends on the initial state of the spectator qubit. These results demonstrate the possibility of constructing CZ\mathrm{CZ}CZ operations for each qubit pair through flux modulation of a shared coupler while maintaining fixed data-qubit frequencies. They also highlight the need to evaluate performance and optimize control over the full computational space, including the spectator qubit.