Challenges
Datasets
Workspaces
Papers
Discussions
Leaderboard
Log inSign up
Challenges
Datasets
Workspaces
Papers
Discussions
Leaderboard
Blog
Job Board
Q3AS

© 2026 Aqora Quantum S.A.S.

TermsPrivacyLegal Notice

arXiv:2103.13962 · Physical Review A

Classical simulation of quantum circuits using a multiqubit Bloch vector representation of density matrices

Qunsheng Huang, Christian B. Mendl

Published Feb 9, 2022• 7 citations
arXivHTMLPDF

Abstract

In the Bloch sphere picture, one finds the coefficients for expanding a single-qubit density operator in terms of the identity and Pauli matrices. A generalization to $n$ qubits via tensor products represents a density operator by a real vector of length ${4}^{n}$, conceptually similar to a state vector. Here, we study this approach for the purpose of quantum circuit simulation, including noise processes. The tensor structure leads to computationally efficient algorithms for applying circuit gates and performing few-qubit quantum operations. In view of variational circuit optimization, we study ``backpropagation'' through a quantum circuit and gradient computation based on this representation, and generalize our analysis to the Lindblad equation for modeling the (nonunitary) time evolution of a density operator.

DOI
10.1103/physreva.105.022409

Related papers

Quantum natural gradient generalized to noisy and nonunitary circuits

Bálint Koczor, Simon C. Benjamin

Variational quantum algorithms are promising tools whose efficacy depends on their optimization method. For noise-free unitary circuits, the quantum generalization of natural gradient descent has been introduced and shown to be equivalent to imaginary time evolution: the approach is effective due to a metric tensor reconciling the classical parameter space to the device's Hilbert space. Here we generalize quantum natural gradient to consider arbitrary quantum states (both mixed and pure) via completely positive maps; thus our circuits can incorporate both imperfect unitary gates and fundamentally nonunitary operations such as measurements. We employ the quantum Fisher information (QFI) as the core metric in the space of density operators. A modification of the error suppression by derangements (ESD) and virtual distillation (VD) techniques enables an accurate and experimentally efficient approximation of the QFI via the Hilbert-Schmidt metric tensor using prior results on the dominant eigenvector of noisy quantum states. Our rigorous proof also establishes the fundamental observation that the geometry of typical noisy quantum states is (approximately) identical in either the Hilbert-Schmidt metric or as characterized by the QFI. In numerical simulations of noisy quantum circuits we demonstrate the practicality of our approach and confirm it can significantly outperform other variational techniques.

arXiv:1912.08660•Physical Review A•Dec 14, 2022•120 citations

Classical simulation of quantum algorithms using the tensor product representation

Kawaguchi, A., Shimizu, K., 康弘 都倉 +1 more

Using the tensor product representation in the density matrix renormalization group, we show that a quantum circuit of Grover's algorithm, which has one-qubit unitary gates, generalized Toffoli gates, and projective measurements, can be efficiently simulated by a classical computer. It is possible to simulate quantum circuits with several ten qubits.

arXiv:quant-ph/0411205•Nov 30, 2004•9 citations

Classical simulation of noisy quantum circuits via locally entanglement-optimal unravelings

Simon Cichy, Paul K. Faehrmann, Lennart Bittel +2 more

Classical simulations of noisy quantum circuits are instrumental to our understanding of the behavior of real-world quantum systems and the identification of regimes where one expects quantum advantage. In this work, we present a highly parallelizable tensor-network-based classical algorithm, equipped with rigorous accuracy guarantees, for simulating n -qubit quantum circuits with arbitrary single-qubit noise. Our algorithm represents the state of a noisy quantum system by a particular ensemble of matrix product states from which we stochastically sample. Each pure state evolved under a single-qubit noise process is then represented by the ensemble of states that achieves the minimal average entanglement (the entanglement of formation) between the noisy qubit and the remainder. This approach lets us use a more compact representation of the quantum state for a given accuracy requirement and noise level. For a given maximum bond dimension χ and circuit, our algorithm comes with an upper bound on the simulation error, runs in poly ( n , χ ) -time, and improves upon related prior work (1) in scope by extending analytic methods from the three commonly considered noise models to general single-qubit noise, (2) in performance by deriving an exact, closed-form solution to the local entanglement minimization problem, previously approached via variational heuristics, thereby guaranteeing local optimality without numerical optimization overhead, and (3) in conceptual contribution by showing that the fixed unraveling used in prior work becomes equivalent to our choice of unraveling in the special case of depolarizing, dephasing, and amplitude damping noise acting on a maximally entangled state.

arXiv:2508.05745•Physical Review A•Jul 9, 2026•13 citations

Logical abstractions for noisy variational Quantum algorithm simulation

Yipeng Huang, Steven Holtzen, Todd D. Millstein +2 more

Due to the unreliability and limited capacity of existing quantum computer prototypes, quantum circuit simulation continues to be a vital tool for validating next generation quantum computers and for studying variational quantum algorithms, which are among the leading candidates for useful quantum computation. Existing quantum circuit simulators do not address the common traits of variational algorithms, namely: 1) their ability to work with noisy qubits and operations, 2) their repeated execution of the same circuits but with different parameters, and 3) the fact that they sample from circuit final wavefunctions to drive a classical optimization routine. We present a quantum circuit simulation toolchain based on logical abstractions targeted for simulating variational algorithms. Our proposed toolchain encodes quantum amplitudes and noise probabilities in a probabilistic graphical model, and it compiles the circuits to logical formulas that support efficient repeated simulation of and sampling from quantum circuits for different parameters. Compared to state-of-the-art state vector and density matrix quantum circuit simulators, our simulation approach offers greater performance when sampling from noisy circuits with at least eight to 20 qubits and with around 12 operations on each qubit, making the approach ideal for simulating near-term variational quantum algorithms. And for simulating noise-free shallow quantum circuits with 32 qubits, our simulation approach offers a 66× reduction in sampling cost versus quantum circuit simulation techniques based on tensor network contraction.

arXiv:2103.17226•International Conference on Architectural Support for Programming Languages and Operating Systems (ASPLOS)•Apr 11, 2021•19 citations

Noisy quantum circuit simulation with the tensor jump method

Maximilian Fröhlich, Aaron Sander, Martin Eigel +2 more

Classical simulation of noisy quantum circuits is essential for validating algorithms, benchmarking hardware, and assessing error-mitigation strategies, but remains limited by the exponential cost of density-matrix methods and the high variance of standard trajectory sampling. We introduce a variance-aware tensor network framework that combines the tensor jump method with local TDVP gate evolution on matrix product states and sparse Pauli-Lindblad hardware noise models. Gates are applied as short variational evolutions on the MPS manifold, while noise is sampled per circuit window from Pauli-Lindblad jump sets with state-independent hazards and dissipative contractions that reduce to irrelevant global factors after renormalization. The method supports correlated multi-qubit Lindblad noise consistent with hardware connectivity, including long-range operators on non-adjacent qubits, enabling direct simulation of crosstalk and other connectivity-induced errors beyond local noise models. We develop two unbiased variance-aware unravelings. An analog unitary-mixture unraveling matches the Lindblad generator exactly under symmetric Gaussian or two-point angle laws, while a projector-jump unraveling yields state-independent hazards and closed-form variance laws. Both retain the standard 1/sqrt(N) Monte Carlo convergence but with reduced prefactors. Empirically, projector sampling strongly reduces trajectory variance and bond-dimension growth across many circuit architectures, whereas analog sampling is most effective at weak noise. We demonstrate accurate, scalable noisy-circuit simulation on a 25-qubit noisy XY quench and IBM's 127-qubit kicked-Ising benchmark with long-range depolarizing noise, achieving reduced Monte Carlo variance and favorable MPS bond-dimension growth compared with standard Kraus-insertion baselines.

quant-pharXiv:2607.01323•Jul 3, 2026•1 citation

Simulating noisy quantum circuits with matrix product density operators

Song Cheng, Chenfeng Cao, Chao Zhang +4 more

Simulating quantum circuits with classical computers requires resources growing exponentially in terms of system size.Real quantum computer with noise, however, may be simulated polynomially with various methods considering different noise models.In this work, we simulate random quantum circuits in one dimension with matrix product density operators (MPDOs), for different noise models such as dephasing, depolarizing, and amplitude damping.We show that the method based on matrix product states (MPSs) fails to approximate the noisy output quantum states for any of the noise models considered, while the MPDO method approximates them well.Compared with the method of matrix product operators (MPOs), the MPDO method reflects a clear physical picture of noise (with inner indices taking care of the noise simulation) and quantum entanglement (with bond indices taking care of two-qubit gate simulation).Consequently, in case of weak system noise, the resource cost of the MPDO will be significantly less than that of the MPO due to a relatively small inner dimension needed for the simulation.In case of strong system noise, a relatively small bond dimension may be sufficient to simulate the noisy circuits, indicating a regime that the noise is large enough for an "easy" classical simulation, which is further supported by a comparison with the experimental results on an IBM cloud device.Moreover, we propose a more effective tensor updates scheme with optimal truncations for both the inner and the bond dimensions, performed after each layer of the circuit, which enjoys a canonical form of the MPDO for improving simulation accuracy.With truncated inner dimension to a maximum value κ and bond dimension to a maximum value χ , the cost of our simulation scales as ∼NDκ 3 χ 3 , for an N-qubit circuit with depth D.

arXiv:2004.02388•Physical Review Research•Apr 1, 2021•52 citations
In the Bloch sphere picture, one finds the coefficients for expanding a single-qubit density operator in terms of the identity and Pauli matrices. A generalization to nnn qubits via tensor products represents a density operator by a real vector of length 4n{4}^{n}4n, conceptually similar to a state vector. Here, we study this approach for the purpose of quantum circuit simulation, including noise processes. The tensor structure leads to computationally efficient algorithms for applying circuit gates and performing few-qubit quantum operations. In view of variational circuit optimization, we study ``backpropagation'' through a quantum circuit and gradient computation based on this representation, and generalize our analysis to the Lindblad equation for modeling the (nonunitary) time evolution of a density operator.
Variational quantum algorithms are promising tools whose efficacy depends on their optimization method. For noise-free unitary circuits, the quantum generalization of natural gradient descent has been introduced and shown to be equivalent to imaginary time evolution: the approach is effective due to a metric tensor reconciling the classical parameter space to the device's Hilbert space. Here we generalize quantum natural gradient to consider arbitrary quantum states (both mixed and pure) via completely positive maps; thus our circuits can incorporate both imperfect unitary gates and fundamentally nonunitary operations such as measurements. We employ the quantum Fisher information (QFI) as the core metric in the space of density operators. A modification of the error suppression by derangements (ESD) and virtual distillation (VD) techniques enables an accurate and experimentally efficient approximation of the QFI via the Hilbert-Schmidt metric tensor using prior results on the dominant eigenvector of noisy quantum states. Our rigorous proof also establishes the fundamental observation that the geometry of typical noisy quantum states is (approximately) identical in either the Hilbert-Schmidt metric or as characterized by the QFI. In numerical simulations of noisy quantum circuits we demonstrate the practicality of our approach and confirm it can significantly outperform other variational techniques.
Classical simulations of noisy quantum circuits are instrumental to our understanding of the behavior of real-world quantum systems and the identification of regimes where one expects quantum advantage. In this work, we present a highly parallelizable tensor-network-based classical algorithm, equipped with rigorous accuracy guarantees, for simulating n -qubit quantum circuits with arbitrary single-qubit noise. Our algorithm represents the state of a noisy quantum system by a particular ensemble of matrix product states from which we stochastically sample. Each pure state evolved under a single-qubit noise process is then represented by the ensemble of states that achieves the minimal average entanglement (the entanglement of formation) between the noisy qubit and the remainder. This approach lets us use a more compact representation of the quantum state for a given accuracy requirement and noise level. For a given maximum bond dimension χ and circuit, our algorithm comes with an upper bound on the simulation error, runs in poly ( n , χ ) -time, and improves upon related prior work (1) in scope by extending analytic methods from the three commonly considered noise models to general single-qubit noise, (2) in performance by deriving an exact, closed-form solution to the local entanglement minimization problem, previously approached via variational heuristics, thereby guaranteeing local optimality without numerical optimization overhead, and (3) in conceptual contribution by showing that the fixed unraveling used in prior work becomes equivalent to our choice of unraveling in the special case of depolarizing, dephasing, and amplitude damping noise acting on a maximally entangled state.
Due to the unreliability and limited capacity of existing quantum computer prototypes, quantum circuit simulation continues to be a vital tool for validating next generation quantum computers and for studying variational quantum algorithms, which are among the leading candidates for useful quantum computation. Existing quantum circuit simulators do not address the common traits of variational algorithms, namely: 1) their ability to work with noisy qubits and operations, 2) their repeated execution of the same circuits but with different parameters, and 3) the fact that they sample from circuit final wavefunctions to drive a classical optimization routine. We present a quantum circuit simulation toolchain based on logical abstractions targeted for simulating variational algorithms. Our proposed toolchain encodes quantum amplitudes and noise probabilities in a probabilistic graphical model, and it compiles the circuits to logical formulas that support efficient repeated simulation of and sampling from quantum circuits for different parameters. Compared to state-of-the-art state vector and density matrix quantum circuit simulators, our simulation approach offers greater performance when sampling from noisy circuits with at least eight to 20 qubits and with around 12 operations on each qubit, making the approach ideal for simulating near-term variational quantum algorithms. And for simulating noise-free shallow quantum circuits with 32 qubits, our simulation approach offers a 66× reduction in sampling cost versus quantum circuit simulation techniques based on tensor network contraction.
Classical simulation of noisy quantum circuits is essential for validating algorithms, benchmarking hardware, and assessing error-mitigation strategies, but remains limited by the exponential cost of density-matrix methods and the high variance of standard trajectory sampling. We introduce a variance-aware tensor network framework that combines the tensor jump method with local TDVP gate evolution on matrix product states and sparse Pauli-Lindblad hardware noise models. Gates are applied as short variational evolutions on the MPS manifold, while noise is sampled per circuit window from Pauli-Lindblad jump sets with state-independent hazards and dissipative contractions that reduce to irrelevant global factors after renormalization. The method supports correlated multi-qubit Lindblad noise consistent with hardware connectivity, including long-range operators on non-adjacent qubits, enabling direct simulation of crosstalk and other connectivity-induced errors beyond local noise models. We develop two unbiased variance-aware unravelings. An analog unitary-mixture unraveling matches the Lindblad generator exactly under symmetric Gaussian or two-point angle laws, while a projector-jump unraveling yields state-independent hazards and closed-form variance laws. Both retain the standard 1/sqrt(N) Monte Carlo convergence but with reduced prefactors. Empirically, projector sampling strongly reduces trajectory variance and bond-dimension growth across many circuit architectures, whereas analog sampling is most effective at weak noise. We demonstrate accurate, scalable noisy-circuit simulation on a 25-qubit noisy XY quench and IBM's 127-qubit kicked-Ising benchmark with long-range depolarizing noise, achieving reduced Monte Carlo variance and favorable MPS bond-dimension growth compared with standard Kraus-insertion baselines.
Simulating quantum circuits with classical computers requires resources growing exponentially in terms of system size.Real quantum computer with noise, however, may be simulated polynomially with various methods considering different noise models.In this work, we simulate random quantum circuits in one dimension with matrix product density operators (MPDOs), for different noise models such as dephasing, depolarizing, and amplitude damping.We show that the method based on matrix product states (MPSs) fails to approximate the noisy output quantum states for any of the noise models considered, while the MPDO method approximates them well.Compared with the method of matrix product operators (MPOs), the MPDO method reflects a clear physical picture of noise (with inner indices taking care of the noise simulation) and quantum entanglement (with bond indices taking care of two-qubit gate simulation).Consequently, in case of weak system noise, the resource cost of the MPDO will be significantly less than that of the MPO due to a relatively small inner dimension needed for the simulation.In case of strong system noise, a relatively small bond dimension may be sufficient to simulate the noisy circuits, indicating a regime that the noise is large enough for an "easy" classical simulation, which is further supported by a comparison with the experimental results on an IBM cloud device.Moreover, we propose a more effective tensor updates scheme with optimal truncations for both the inner and the bond dimensions, performed after each layer of the circuit, which enjoys a canonical form of the MPDO for improving simulation accuracy.With truncated inner dimension to a maximum value κ and bond dimension to a maximum value χ , the cost of our simulation scales as ∼NDκ 3 χ 3 , for an N-qubit circuit with depth D.