Challenges
Datasets
Workspaces
Papers
Discussions
Leaderboard
Log inSign up
Challenges
Datasets
Workspaces
Papers
Discussions
Leaderboard
Blog
Job Board
Q3AS

© 2026 Aqora Quantum S.A.S.

TermsPrivacyLegal Notice

arXiv:2103.10955 · OSA Continuum

High-precision quantum transmittometry of DNA and methylene-blue using a frequency-entangled twin-photon beam in type-I SPDC

Ali Motazedifard, Seyed Ahmad Madani

Published Feb 25, 2021• 15 citations
arXivHTMLPDF

Abstract

Using the coincidence-count (CC) measurement of the generated frequency-entangled twin-photon beam (TWB) via the process of type-I spontaneous parametric-down conversion (SPDC) in BBO nonlinear crystal (NLC), we have precisely measured the transmittance of very diluted rabbit- and human-DNA, methylene-blue (MB) as a disinfectant, and a thin-film multilayer at near IR wavelength 810nm with an accuracy in order of %0.01 due to the quantum correlation, while the accuracy of classical-like measurement, single-count (SC), is in order of %0.1 in our setup. Moreover, using quantum measurement of the transmittance, the different types of DNA with the same concentration, and also very diluted (in order of pg/μl) different concentrations of DNA and MB solutions, are distinguished and detected with high-reliability. Interestingly, in the case of human-DNA samples in contrast to our classical-like measurement, we could precisely detect and distinguish two very diluted concentrations 0.01ng/μl and 0.1ng/μl with high reliability while the commercial standard spectrometer device of our DNA-manufacturer could neither detect nor distinguish them. Surprisingly, measurement on the thin-film multilayer illustrates that the introduced method in this work might be performed to cancer/brain tissues or stem cells for cancer therapy and may hopefully open a pave and platform for non-invasive quantum diagnosis in the future.

DOI
10.1364/osac.413830

Related papers

Measurement of entropy and quantum coherence properties of two type-I entangled photonic qubits

Ali Motazedifard, Seyed Ahmad Madani, Nader Sobhkhiz Vayghan

Abstract Using the type-I SPDC process in BBO nonlinear crystal (NLC), we generate a polarization-entangled state near to the maximally-entangled Bell-state with high-visibility (high-brightness) 98.50 ±1.33 % (87.71 ± 4.45 %) for HV (DA) basis. We calculate the CHSH version of the Bell inequality, as a nonlocal realism test, and find a strong violation from the classical physics or any hidden variable theory (HVT), S= 2.71±0.10. Via measuring the coincidence count (CC) rate in the SPDC process, we obtain the quantum efficiency of single-photon detectors (SPDs) around (25.5 ±3.4)% , which is in good agreement to their manufacturer company. As expected, we verify the linear dependency of the CC rate vs. pump power of input CW-laser, which may yield to find the effective second-order susceptibility crystal. Using the theory of the measurement of qubits, includes a tomographic reconstruction of quantum states due to the linear set of 16 polarization-measurement, together with a maximum-likelihood-technique (MLT), which is based on the numerical optimization, we calculate the physical non-negative definite density matrices, which implies on the non-separability and entanglement of prepared state. By having the maximum likelihood density operator, we calculate precisely the entanglement measures such as Concurrence, entanglement of formation, tangle, logarithmic negativity, and different entanglement entropies such as linear entropy, Von-Neumann entropy, and Renyi 2-entropy. Finally, this high-brightness and low-rate entangled photons source can be used for short-range quantum measurements in the Lab.

arXiv:2012.02658•Optical and Quantum Electronics•Jul 1, 2021•11 citations

Long wavelength, small quantum interferometer module: shrinking MIR OCT systems via quantum entanglement

Gunnar Blume, David Feise, Alexander Sahm +8 more

Optical coherence tomography (OCT) in the mid infrared (MIR) spectral range offers an elegant way of non-destructive optical testing of coatings that are opaque at visible and near infrared (NIR) wavelengths. However, light sources and detection equipment in the MIR are somewhat cumbersome due to low emission intensity and detectivity. Here we use spontaneous parametric down-conversion (SPDC) in a periodically poled KTP crystal pumped with 700 mW at 660 nm. The SPDC produces MIR photons near 3.8 µm and entangled NIR photons near 800 nm. All three wavelengths are used in a Michelson-type quantum interferometer. Only MIR photons interact with the device under test (DUT) and share their interference information with the NIR via the entanglement. The NIR photons are then analyzed with a conventional silicon-based spectrometer, thus, allowing MIR "sensing with undetected photons". We were able to shrink the quantum interferometer module to a footprint of 80 x 60 mm² including the 660 nm pump laser. The external MIR beam path offers a length of 235 mm ± 1.5 mm to the DUT and a single mode fiber port to the spectrometer. Using a mirror as a DUT we achieved a visibility of the quantum interference of up to 39%.

Optical and Quantum Sensing and Precision Metrology II•Mar 19, 2025•2 citations

Quantum-entangled photon interferometry

Roger K. Richards

A two-color quantum-entangled photon source is used to produce fourth-order interference. Because the period of the interference is produced by the frequency difference of the entangled photons, problems associated with counting fringes can be avoided. This also permits measurements at a virtual wavelength, which can prevent problems associated with transmission or absorption when such a longer wavelength may be needed. The interference wavelength can be varied with a geometry change in the beam path without any change in the source wavelength. The entangled photons are produced using an argon ion laser at 351 nanometers and a type I BBO crystal. The interference is detected in coincidence using four photomultiplier tubes.

Proceedings of SPIE, the International Society for Optical Engineering/Proceedings of SPIE•Aug 2, 2004•1 citation

Enhanced orbital-angular-momentum dimensionality and spatial-spectral decoupling in thin-film SPDC

Dmitrii Akatev, Jakub Lewandowski, Maria Chekhova

Thin-film spontaneous parametric down-conversion, due to the relaxed phase-matching condition, generates photon pairs that are extremely broadband in frequency and angle and highly entangled in time/frequency and position/momentum. Here we show that it also provides a very broad orbital angular momentum (OAM) spectrum, which, in contrast to the case of bulk crystals, is decoupled from the frequency spectrum. To demonstrate it experimentally, we generate photon pairs in a $7~μ\mathrm{m}$-thick lithium niobate film and compare them with those from a $500~μ\mathrm{m}$-thick periodically poled lithium niobate crystal under identical pump conditions. The thin-film source exhibits a substantially broader OAM spectrum, with the azimuthal Schmidt number almost 9 times larger than that of the bulk source. On this highly entangled state, we perform quantum-state tomography in selected two- and four-dimensional OAM subspaces, demonstrating high-purity maximally entangled states. These results highlight thin nonlinear films as a promising platform for high-dimensional quantum-state generation with weak spatial--spectral coupling.

physics.opticsCross-listedarXiv:2610.28020•Oct 21, 2026•0 citations

High efficiency femtosecond source of entangled photons

Vygandas Jarutis, Saulius Juodkazis, V. Mizeikis +1 more

The method allowing enhance the eficiency of entangled photon sources based on Type II spontaneous parametric down conversion (SPDC) by means of mode inversion of one of the SPDC output beams is described. Overlap between the the entire signal in idler beams can be achieved using the mode inversion thus maximizing the SPDC photon pair yields. With this method, coincidence count rates as high as 60 kHz from a single 0.5 mm long bulk BBO crystal pumped by the second-harmonic radiation of a femtosecond Ti: Sapphire laser, were obtained.

Conference on Lasers and Electro-Optics•Jan 1, 2005•0 citations

Efficient MIR sensing with undetected photons: high brightness, miniaturized SPDC module for real world applications

Philipp Hildenstein, Gunnar Blume, Alexander Sahm +9 more

Sensing applications in the mid-infrared (MIR) spectral range are challenging due to the high cost and low performance of the available light sources and detectors. This issue can be bypassed by utilizing the process of spontaneous parametric down-conversion (SPDC) to generate tailored MIR-NIR photon-pairs. The nature of SPDC enforces the generation of frequency-entanglement between these paired photons which can be used for spectroscopy: Within a nonlinear interferometric configuration, the MIR radiation is employed for the illumination of a specific material, whereas the NIR radiation is analyzed using a conventional spectrometer. This technique, which is referred to as sensing with ”undetected photons”, so far relied on a breadboard optical setup that is both space-consuming, heavy and complex. Here we present the design, manufacturing and application of a miniaturized quantum light module, with a footprint of less than 80 x 60 mm², which is powered by a direct emitting diode laser at 720 nm. The module contains the nonlinear crystal as the quantum light source, the optical path for the NIR beam, and mechanical connectors leading to the MIR sensing arm. It also provides an interconnection to a spectrometer for the information-carrying NIR photons. This study presents insights into the optical design of the module, its manufacturing and the nonlinear optics quantum light source. The module emits a MIR-NIR photon-pair rate of 1.7 × 109 s−1 W−1, which allows for the implementation of time-efficient sensing applications. The design is optimized for a first application - the detection of synthetic polymers in aqueous solutions, which will be illustrated by concepts for the detection of micro-plastics in wastewater in the field with a mobile device. The potential for integrating a sophisticated, non-linear optical interference configuration into a user-friendly micro-module paves the way for the development of industry-ready setups. This enables a variety of other applications, which are covered by sensing with undetected photons.

Optical and Quantum Sensing and Precision Metrology II•Mar 19, 2025•1 citation
Using the coincidence-count (CC) measurement of the generated frequency-entangled twin-photon beam (TWB) via the process of type-I spontaneous parametric-down conversion (SPDC) in BBO nonlinear crystal (NLC), we have precisely measured the transmittance of very diluted rabbit- and human-DNA, methylene-blue (MB) as a disinfectant, and a thin-film multilayer at near IR wavelength 810nm with an accuracy in order of %0.01 due to the quantum correlation, while the accuracy of classical-like measurement, single-count (SC), is in order of %0.1 in our setup. Moreover, using quantum measurement of the transmittance, the different types of DNA with the same concentration, and also very diluted (in order of pg/μl) different concentrations of DNA and MB solutions, are distinguished and detected with high-reliability. Interestingly, in the case of human-DNA samples in contrast to our classical-like measurement, we could precisely detect and distinguish two very diluted concentrations 0.01ng/μl and 0.1ng/μl with high reliability while the commercial standard spectrometer device of our DNA-manufacturer could neither detect nor distinguish them. Surprisingly, measurement on the thin-film multilayer illustrates that the introduced method in this work might be performed to cancer/brain tissues or stem cells for cancer therapy and may hopefully open a pave and platform for non-invasive quantum diagnosis in the future.
Abstract Using the type-I SPDC process in BBO nonlinear crystal (NLC), we generate a polarization-entangled state near to the maximally-entangled Bell-state with high-visibility (high-brightness) 98.50 ±1.33 % (87.71 ± 4.45 %) for HV (DA) basis. We calculate the CHSH version of the Bell inequality, as a nonlocal realism test, and find a strong violation from the classical physics or any hidden variable theory (HVT), S= 2.71±0.10. Via measuring the coincidence count (CC) rate in the SPDC process, we obtain the quantum efficiency of single-photon detectors (SPDs) around (25.5 ±3.4)% , which is in good agreement to their manufacturer company. As expected, we verify the linear dependency of the CC rate vs. pump power of input CW-laser, which may yield to find the effective second-order susceptibility crystal. Using the theory of the measurement of qubits, includes a tomographic reconstruction of quantum states due to the linear set of 16 polarization-measurement, together with a maximum-likelihood-technique (MLT), which is based on the numerical optimization, we calculate the physical non-negative definite density matrices, which implies on the non-separability and entanglement of prepared state. By having the maximum likelihood density operator, we calculate precisely the entanglement measures such as Concurrence, entanglement of formation, tangle, logarithmic negativity, and different entanglement entropies such as linear entropy, Von-Neumann entropy, and Renyi 2-entropy. Finally, this high-brightness and low-rate entangled photons source can be used for short-range quantum measurements in the Lab.
Optical coherence tomography (OCT) in the mid infrared (MIR) spectral range offers an elegant way of non-destructive optical testing of coatings that are opaque at visible and near infrared (NIR) wavelengths. However, light sources and detection equipment in the MIR are somewhat cumbersome due to low emission intensity and detectivity. Here we use spontaneous parametric down-conversion (SPDC) in a periodically poled KTP crystal pumped with 700 mW at 660 nm. The SPDC produces MIR photons near 3.8 µm and entangled NIR photons near 800 nm. All three wavelengths are used in a Michelson-type quantum interferometer. Only MIR photons interact with the device under test (DUT) and share their interference information with the NIR via the entanglement. The NIR photons are then analyzed with a conventional silicon-based spectrometer, thus, allowing MIR "sensing with undetected photons". We were able to shrink the quantum interferometer module to a footprint of 80 x 60 mm² including the 660 nm pump laser. The external MIR beam path offers a length of 235 mm ± 1.5 mm to the DUT and a single mode fiber port to the spectrometer. Using a mirror as a DUT we achieved a visibility of the quantum interference of up to 39%.
A two-color quantum-entangled photon source is used to produce fourth-order interference. Because the period of the interference is produced by the frequency difference of the entangled photons, problems associated with counting fringes can be avoided. This also permits measurements at a virtual wavelength, which can prevent problems associated with transmission or absorption when such a longer wavelength may be needed. The interference wavelength can be varied with a geometry change in the beam path without any change in the source wavelength. The entangled photons are produced using an argon ion laser at 351 nanometers and a type I BBO crystal. The interference is detected in coincidence using four photomultiplier tubes.
Thin-film spontaneous parametric down-conversion, due to the relaxed phase-matching condition, generates photon pairs that are extremely broadband in frequency and angle and highly entangled in time/frequency and position/momentum. Here we show that it also provides a very broad orbital angular momentum (OAM) spectrum, which, in contrast to the case of bulk crystals, is decoupled from the frequency spectrum. To demonstrate it experimentally, we generate photon pairs in a 7 μm7~μ\mathrm{m}7 μm-thick lithium niobate film and compare them with those from a 500 μm500~μ\mathrm{m}500 μm-thick periodically poled lithium niobate crystal under identical pump conditions. The thin-film source exhibits a substantially broader OAM spectrum, with the azimuthal Schmidt number almost 9 times larger than that of the bulk source. On this highly entangled state, we perform quantum-state tomography in selected two- and four-dimensional OAM subspaces, demonstrating high-purity maximally entangled states. These results highlight thin nonlinear films as a promising platform for high-dimensional quantum-state generation with weak spatial--spectral coupling.
The method allowing enhance the eficiency of entangled photon sources based on Type II spontaneous parametric down conversion (SPDC) by means of mode inversion of one of the SPDC output beams is described. Overlap between the the entire signal in idler beams can be achieved using the mode inversion thus maximizing the SPDC photon pair yields. With this method, coincidence count rates as high as 60 kHz from a single 0.5 mm long bulk BBO crystal pumped by the second-harmonic radiation of a femtosecond Ti: Sapphire laser, were obtained.
Sensing applications in the mid-infrared (MIR) spectral range are challenging due to the high cost and low performance of the available light sources and detectors. This issue can be bypassed by utilizing the process of spontaneous parametric down-conversion (SPDC) to generate tailored MIR-NIR photon-pairs. The nature of SPDC enforces the generation of frequency-entanglement between these paired photons which can be used for spectroscopy: Within a nonlinear interferometric configuration, the MIR radiation is employed for the illumination of a specific material, whereas the NIR radiation is analyzed using a conventional spectrometer. This technique, which is referred to as sensing with ”undetected photons”, so far relied on a breadboard optical setup that is both space-consuming, heavy and complex. Here we present the design, manufacturing and application of a miniaturized quantum light module, with a footprint of less than 80 x 60 mm², which is powered by a direct emitting diode laser at 720 nm. The module contains the nonlinear crystal as the quantum light source, the optical path for the NIR beam, and mechanical connectors leading to the MIR sensing arm. It also provides an interconnection to a spectrometer for the information-carrying NIR photons. This study presents insights into the optical design of the module, its manufacturing and the nonlinear optics quantum light source. The module emits a MIR-NIR photon-pair rate of 1.7 × 109 s−1 W−1, which allows for the implementation of time-efficient sensing applications. The design is optimized for a first application - the detection of synthetic polymers in aqueous solutions, which will be illustrated by concepts for the detection of micro-plastics in wastewater in the field with a mobile device. The potential for integrating a sophisticated, non-linear optical interference configuration into a user-friendly micro-module paves the way for the development of industry-ready setups. This enables a variety of other applications, which are covered by sensing with undetected photons.