Challenges
Datasets
Workspaces
Papers
Discussions
Leaderboard
Log inSign up
Challenges
Datasets
Workspaces
Papers
Discussions
Leaderboard
Blog
Job Board
Q3AS

© 2026 Aqora Quantum S.A.S.

TermsPrivacyLegal Notice

arXiv:2102.01225 · PLoS ONE

Sampling electronic structure quadratic unconstrained binary optimization problems (QUBOs) with Ocean and Mukai solvers

Alexander Teplukhin, Brian K. Kendrick, Susan M. Mniszewski, Sergei Tretiak, Pavel A. Dub

Published Feb 11, 2022• 14 citations
arXivHTMLPDF

Abstract

The most advanced D-Wave Advantage quantum annealer has 5000+ qubits, however, every qubit is connected to a small number of neighbors. As such, implementation of a fully-connected graph results in an order of magnitude reduction in qubit count. To compensate for the reduced number of qubits, one has to rely on special heuristic software such as qbsolv, the purpose of which is to decompose a large quadratic unconstrained binary optimization (QUBO) problem into smaller pieces that fit onto a quantum annealer. In this work, we compare the performance of the open-source qbsolv which is a part of the D-Wave Ocean tools and a new Mukai QUBO solver from Quantum Computing Inc. (QCI). The comparison is done for solving the electronic structure problem and is implemented in a classical mode (Tabu search techniques). The Quantum Annealer Eigensolver is used to map the electronic structure eigenvalue-eigenvector equation to a QUBO problem, solvable on a D-Wave annealer. We find that the Mukai QUBO solver outperforms the Ocean qbsolv with one to two orders of magnitude more accurate energies for all calculations done in the present work, both the ground and excited state calculations. This work stimulates the further development of software to assist in the utilization of modern quantum annealers.

DOI
10.1371/journal.pone.0263849

Related papers

Toward a QUBO-Based Density Matrix Electronic Structure Method

Christian F. A. Negre, Alejandro López‐Bezanilla, Yu Zhang +4 more

Density matrix electronic structure theory is used in many quantum chemistry methods to "alleviate" the computational cost that arises from directly using wave functions. Although density matrix based methods are computationally more efficient than wave function based methods, significant computational effort is involved. Because the Schrödinger equation needs to be solved as an eigenvalue problem, the time-to-solution scales cubically with the system size in mean-field type approaches such as Hartree-Fock and density functional theory and is solved as many times in order to reach charge or field self-consistency. We hereby propose and study a method to compute the density matrix by using a quadratic unconstrained binary optimization (QUBO) solver. This method could be useful to solve the problem with quantum computers and, more specifically, quantum annealers. Our proposed approach is based on a direct construction of the density matrix using a QUBO eigensolver. We explore the main parameters of the algorithm focusing on precision and efficiency. We show that, while direct construction of the density matrix using a QUBO formulation is possible, the efficiency and precision have room for improvement. Moreover, calculations performed with quantum annealing on D-Wave's new Advantage quantum computer are compared with results obtained with classical simulated annealing, further highlighting some problems of the proposed method. We also suggest alternative methods that could lead to a more efficient QUBO-based density matrix construction.

arXiv:2201.04720•Journal of Chemical Theory and Computation•Jun 3, 2022•8 citations

Efficient Combinatorial Optimization Using Quantum Annealing

Hristo N. Djidjev, Guillaume Chapuis, Georg Hahn +1 more

The recent availability of the first commercial quantum computers has provided a promising tool to tackle NP hard problems which can only be solved heuristically with present techniques. However, it is unclear if the current state of quantum computing already provides a quantum advantage over the current state of the art in classical computing. This article assesses the performance of the D-Wave 2X quantum annealer on two NP hard graph problems, in particular clique finding and graph partitioning. For this, we provide formulations as Qubo and Ising Hamiltonians suitable for the quantum annealer and compare a variety of quantum solvers (Sapi, QBSolv, QSage provided by D-Wave Sys, Inc.) to current classical algorithms (METIS, Simulated Annealing, third-party clique finding and graph splitting heuristics) on certain test sets of graphs. We demonstrate that for small graph instances, classical methods still outperform the quantum annealer in terms of computing time, even though the quality of the best solutions obtained is comparable. Nevertheless, due to the limited problem size which can be embedded on the D-Wave 2X chip, the aforementioned finding applies to most of problems of general nature solvable on the quantum annealer. For instances specifically designed to fit the D-Wave 2X architecture, we observe substantial speed-ups in computing time over classical approaches.

arXiv:1801.08653•Jan 26, 2018•65 citations

Optimized QUBO formulation methods for quantum computing

Dario De Santis, Salvatore Tirone, Stefano Marmi +1 more

Abstract Quantum computers have strict requirements for the problems that they can efficiently solve. One of the principal limiting factor for the performances of noisy intermediate-scale quantum (NISQ) devices is the number of qubits required by the running algorithm. Several combinatorial optimization problems can be solved with NISQ devices once that a corresponding quadratic unconstrained binary optimization (QUBO) form is derived. Numerous techniques have been proposed to achieve such reformulations and, depending on the method chosen, the number of binary variables required, and therefore of qubits, can vary considerably. The aim of this work is to drastically reduce the variables needed for these QUBO reformulations in order to unlock the possibility to efficiently obtain optimal solutions for a class of optimization problems with NISQ devices. This goal is achieved by introducing novel tools that allow an efficient use of slack variables, even for problems with non-linear constraints, without the need to approximate the starting problem. We divide our new techniques in two independent parts, called the iterative quadratic polynomial and the master-satellite methods. Hence, we show how to apply our techniques in case of an NP-hard optimization problem inspired by a real-world financial scenario called Max-Profit Balance Settlement . We follow by submitting several instances of this problem to two D-wave quantum annealers, comparing the performances of our novel approach with the standard methods used in these scenarios. Moreover, this study allows to appreciate several performance differences between the D-wave Advantage and next-generation Advantage2 quantum annealers. We show that the adoption of our techniques in this context allows to obtain QUBO formulations with significantly fewer slack variables, i.e. around 90% less, and D-wave annealers provide considerably higher correct solution rates, which moreover do not decrease with the input size as fast as when adopting standard techniques.

arXiv:2406.07681•Quantum Science and Technology•Jan 21, 2026•17 citations

Quadratic unconstrained binary optimization problem preprocessing: Theory and empirical analysis

Mark W. Lewis, Fred Glover

The Quadratic Unconstrained Binary Optimization problem (QUBO) has become a unifying model for representing a wide range of combinatorial optimization problems, and for linking a variety of disciplines that face these problems. A new class of quantum annealing computer that maps QUBO onto a physical qubit network structure with specific size and edge density restrictions is generating a growing interest in ways to transform the underlying QUBO structure into an equivalent graph having fewer nodes and edges. In this article, we present rules for reducing the size of the QUBO matrix by identifying variables whose value at optimality can be predetermined. We verify that the reductions improve both solution quality and time to solution and, in the case of metaheuristic methods where optimal solutions cannot be guaranteed, the quality of solutions obtained within reasonable time limits. We discuss the general QUBO structural characteristics that can take advantage of these reduction techniques and perform careful experimental design and analysis to identify and quantify the specific characteristics most affecting reduction. The rules make it possible to dramatically improve solution times on a new set of problems using both the exact Cplex solver and a tabu search metaheuristic. © 2017 Wiley Periodicals, Inc. NETWORKS, Vol. 70(2), 79–97 2017

arXiv:1705.09844•Networks•Jun 24, 2017•118 citations

Solving Optimization Problems Using Adiabatic Quantum Computing

Liu, Kai

The commercial D-Waves quantum annealer has given rise to plenty of interests due to the reported quantum speedup against classical annealing. In order to make use of this new technology, a problem must be formulated into a form of quadratic unconstrained binary optimization (QUBO) or Ising model. This thesis reports on case studies using a D-Wave quantum annealer to solve several optimization problems and providing results validation using classical exact approaches. In our thesis, we briefly introduce several classical techniques designed for QUBO problems and implement two exact approaches. With the proper tools, a D-Wave 2X computer consisted of 1098 active qubits is then evaluated for the Degree-Constrained Minimum Spanning Tree and the Steiner Tree problems, establishing their QUBO formulations are suitable for adiabatic quantum computers. Motivated by the remarkable performance, two more optimization problems are studied—the Bounded-Depth Steiner Tree problem and the Chromatic Sum problem. We propose a new formulation for each problem. The numbers of qubits (dimension of QUBO matrices) required by our formulations are O(|V|3) and O(|V|2) respectively, where |V| represents the number of vertices.

•Jan 1, 2018•0 citations

New QUBO Transformations to Improve Quantum and Simulated Annealing Performance for Quadratic Knapsack

Nicolás Borrajo, Juan Ramírez, Farzam Nosrati +3 more

Recent advancements in quantum computing have demonstrated significant potential for solving combinatorial optimization problems, like the quadratic knapsack problem, a constrained binary optimization problem. However, current quantum and quantum-inspired algorithms often require transforming these constrained problems into an unconstrained form, known as Quadratic Unconstrained Binary Optimization (QUBO). Such transformations can significantly impact the algorithms’ speed and efficiency. In this study, we evaluate five existing transformation methods and propose four novel approaches. We assess all nine methods using Simulated Annealing and find that three of our approaches outperform existing methods in terms of execution time and the quality and quantity of feasible solutions found. Additionally, we tested these transformations on quantum annealers, which were unable to solve even small problem instances, due to limitations in connectivity and error rates. However, our results highlight the advantages of the new approaches, which reduce the total number of variables in the QUBO representation. This is a critical factor for enhanced performance on emerging quantum hardware, since it also reduces the required number of qubits and the embedding chain lengths.

International Conference on Agents and Artificial Intelligence (ICAART)•Jan 1, 2026•1 citation
The most advanced D-Wave Advantage quantum annealer has 5000+ qubits, however, every qubit is connected to a small number of neighbors. As such, implementation of a fully-connected graph results in an order of magnitude reduction in qubit count. To compensate for the reduced number of qubits, one has to rely on special heuristic software such as qbsolv, the purpose of which is to decompose a large quadratic unconstrained binary optimization (QUBO) problem into smaller pieces that fit onto a quantum annealer. In this work, we compare the performance of the open-source qbsolv which is a part of the D-Wave Ocean tools and a new Mukai QUBO solver from Quantum Computing Inc. (QCI). The comparison is done for solving the electronic structure problem and is implemented in a classical mode (Tabu search techniques). The Quantum Annealer Eigensolver is used to map the electronic structure eigenvalue-eigenvector equation to a QUBO problem, solvable on a D-Wave annealer. We find that the Mukai QUBO solver outperforms the Ocean qbsolv with one to two orders of magnitude more accurate energies for all calculations done in the present work, both the ground and excited state calculations. This work stimulates the further development of software to assist in the utilization of modern quantum annealers.
Density matrix electronic structure theory is used in many quantum chemistry methods to "alleviate" the computational cost that arises from directly using wave functions. Although density matrix based methods are computationally more efficient than wave function based methods, significant computational effort is involved. Because the Schrödinger equation needs to be solved as an eigenvalue problem, the time-to-solution scales cubically with the system size in mean-field type approaches such as Hartree-Fock and density functional theory and is solved as many times in order to reach charge or field self-consistency. We hereby propose and study a method to compute the density matrix by using a quadratic unconstrained binary optimization (QUBO) solver. This method could be useful to solve the problem with quantum computers and, more specifically, quantum annealers. Our proposed approach is based on a direct construction of the density matrix using a QUBO eigensolver. We explore the main parameters of the algorithm focusing on precision and efficiency. We show that, while direct construction of the density matrix using a QUBO formulation is possible, the efficiency and precision have room for improvement. Moreover, calculations performed with quantum annealing on D-Wave's new Advantage quantum computer are compared with results obtained with classical simulated annealing, further highlighting some problems of the proposed method. We also suggest alternative methods that could lead to a more efficient QUBO-based density matrix construction.
The recent availability of the first commercial quantum computers has provided a promising tool to tackle NP hard problems which can only be solved heuristically with present techniques. However, it is unclear if the current state of quantum computing already provides a quantum advantage over the current state of the art in classical computing. This article assesses the performance of the D-Wave 2X quantum annealer on two NP hard graph problems, in particular clique finding and graph partitioning. For this, we provide formulations as Qubo and Ising Hamiltonians suitable for the quantum annealer and compare a variety of quantum solvers (Sapi, QBSolv, QSage provided by D-Wave Sys, Inc.) to current classical algorithms (METIS, Simulated Annealing, third-party clique finding and graph splitting heuristics) on certain test sets of graphs. We demonstrate that for small graph instances, classical methods still outperform the quantum annealer in terms of computing time, even though the quality of the best solutions obtained is comparable. Nevertheless, due to the limited problem size which can be embedded on the D-Wave 2X chip, the aforementioned finding applies to most of problems of general nature solvable on the quantum annealer. For instances specifically designed to fit the D-Wave 2X architecture, we observe substantial speed-ups in computing time over classical approaches.
Abstract Quantum computers have strict requirements for the problems that they can efficiently solve. One of the principal limiting factor for the performances of noisy intermediate-scale quantum (NISQ) devices is the number of qubits required by the running algorithm. Several combinatorial optimization problems can be solved with NISQ devices once that a corresponding quadratic unconstrained binary optimization (QUBO) form is derived. Numerous techniques have been proposed to achieve such reformulations and, depending on the method chosen, the number of binary variables required, and therefore of qubits, can vary considerably. The aim of this work is to drastically reduce the variables needed for these QUBO reformulations in order to unlock the possibility to efficiently obtain optimal solutions for a class of optimization problems with NISQ devices. This goal is achieved by introducing novel tools that allow an efficient use of slack variables, even for problems with non-linear constraints, without the need to approximate the starting problem. We divide our new techniques in two independent parts, called the iterative quadratic polynomial and the master-satellite methods. Hence, we show how to apply our techniques in case of an NP-hard optimization problem inspired by a real-world financial scenario called Max-Profit Balance Settlement . We follow by submitting several instances of this problem to two D-wave quantum annealers, comparing the performances of our novel approach with the standard methods used in these scenarios. Moreover, this study allows to appreciate several performance differences between the D-wave Advantage and next-generation Advantage2 quantum annealers. We show that the adoption of our techniques in this context allows to obtain QUBO formulations with significantly fewer slack variables, i.e. around 90% less, and D-wave annealers provide considerably higher correct solution rates, which moreover do not decrease with the input size as fast as when adopting standard techniques.
The Quadratic Unconstrained Binary Optimization problem (QUBO) has become a unifying model for representing a wide range of combinatorial optimization problems, and for linking a variety of disciplines that face these problems. A new class of quantum annealing computer that maps QUBO onto a physical qubit network structure with specific size and edge density restrictions is generating a growing interest in ways to transform the underlying QUBO structure into an equivalent graph having fewer nodes and edges. In this article, we present rules for reducing the size of the QUBO matrix by identifying variables whose value at optimality can be predetermined. We verify that the reductions improve both solution quality and time to solution and, in the case of metaheuristic methods where optimal solutions cannot be guaranteed, the quality of solutions obtained within reasonable time limits. We discuss the general QUBO structural characteristics that can take advantage of these reduction techniques and perform careful experimental design and analysis to identify and quantify the specific characteristics most affecting reduction. The rules make it possible to dramatically improve solution times on a new set of problems using both the exact Cplex solver and a tabu search metaheuristic. © 2017 Wiley Periodicals, Inc. NETWORKS, Vol. 70(2), 79–97 2017
The commercial D-Waves quantum annealer has given rise to plenty of interests due to the reported quantum speedup against classical annealing. In order to make use of this new technology, a problem must be formulated into a form of quadratic unconstrained binary optimization (QUBO) or Ising model. This thesis reports on case studies using a D-Wave quantum annealer to solve several optimization problems and providing results validation using classical exact approaches. In our thesis, we briefly introduce several classical techniques designed for QUBO problems and implement two exact approaches. With the proper tools, a D-Wave 2X computer consisted of 1098 active qubits is then evaluated for the Degree-Constrained Minimum Spanning Tree and the Steiner Tree problems, establishing their QUBO formulations are suitable for adiabatic quantum computers. Motivated by the remarkable performance, two more optimization problems are studied—the Bounded-Depth Steiner Tree problem and the Chromatic Sum problem. We propose a new formulation for each problem. The numbers of qubits (dimension of QUBO matrices) required by our formulations are O(|V|3) and O(|V|2) respectively, where |V| represents the number of vertices.
Recent advancements in quantum computing have demonstrated significant potential for solving combinatorial optimization problems, like the quadratic knapsack problem, a constrained binary optimization problem. However, current quantum and quantum-inspired algorithms often require transforming these constrained problems into an unconstrained form, known as Quadratic Unconstrained Binary Optimization (QUBO). Such transformations can significantly impact the algorithms’ speed and efficiency. In this study, we evaluate five existing transformation methods and propose four novel approaches. We assess all nine methods using Simulated Annealing and find that three of our approaches outperform existing methods in terms of execution time and the quality and quantity of feasible solutions found. Additionally, we tested these transformations on quantum annealers, which were unable to solve even small problem instances, due to limitations in connectivity and error rates. However, our results highlight the advantages of the new approaches, which reduce the total number of variables in the QUBO representation. This is a critical factor for enhanced performance on emerging quantum hardware, since it also reduces the required number of qubits and the embedding chain lengths.