Remote control of experimental systems allows for improved collaboration between research groups as well as unique remote educational opportunities accessible by students and citizen scientists. Here, we describe an experiment for the production and investigation of ultracold quantum gases capable of asynchronous remote control by multiple remote users. This is enabled by a queuing system coupled to an interface that can be modified to suit the user, e.g. a gamified interface for use by the general public or a scripted interface for use by an expert. To demonstrate this, the laboratory was opened to remote experts and the general public. During the available time, remote users were given the task of optimising the production of a Bose–Einstein condensate (BEC). This work thus provides a stepping stone towards the exploration and realisation of more advanced physical models by remote experts, students and citizen scientists alike.
Remote control of experimental systems allows for improved collaboration between research groups as well as unique remote educational opportunities accessible by students and citizen scientists. Here, we describe an experiment for the production and investigation of ultracold quantum gases capable of asynchronous remote control by multiple remote users. This is enabled by a queuing system coupled to an interface that can be modified to suit the user, e.g. a gamified interface for use by the general public or a scripted interface for use by an expert. To demonstrate this, the laboratory was opened to remote experts and the general public. During the available time, remote users were given the task of optimising the production of a Bose–Einstein condensate (BEC). This work thus provides a stepping stone towards the exploration and realisation of more advanced physical models by remote experts, students and citizen scientists alike.
Bose-Einstein condensates (BECs), a quantum state of matter formed when bosonic atoms are cooled close to absolute zero, have become the premier platform for investigating fundamental physics with atomic vapours. Experiments on Bose-Einstein condensates now achieve exquisite control over many aspects of the system, including interactions, trapping potential, and dynamics. This has precipitated a new wave of research into many-body quantum phenomena and, in particular, solitons. These structures are fundamental excitations of an interacting non-linear medium, of interest to a multitude of scientific disciplines from non-linear optics to financial markets. The highly controllable environment of BECs form an attractive playground for the study of solitons allowing the non-linearity to be dynamically tuned, facilitating deeper investigations into these structures. Consistently generating and analysing solitons in BEC experiments continues to be problematic. In particular, the non-linear dynamics of BECs, though required for the generation of solitons, produce particularly challenging control and optimization problems. These control problems must be solved before further investigations into the fundamental physics of soliton dynamics can be answered. This thesis makes three important advances in the control and measurement of BECs that will lead to better generation and observation of solitons. (1) a theoretical model for a control scheme capable of highly precise wavefunction engineering, (2) the experimental implementation of a machine learning algorithm for online optimisation, and (3) a continuous non-destructive imaging system capable of directly observing soliton dynamics in real-time. Together, these advances provide a suite of tools for manipulating and exploiting solitons in Bose-Einstein condensates. A novel technique was developed theoretically, offering control of the macroscopic wavefunction of a Bose-Einstein condensate with unprecedented spatial resolution and speed. The ability to control the atomic wavefunction at the fundamental length scale is key to the advancement of many quantum technologies such as quantum simulators. The magnetic resonance control scheme is demonstrated through simulation of a 87Rb condensate with the exemplar model generating a single dark soliton with corresponding π phase kink. The soliton represents a structure at the fundamental length scale of the system, and demonstrates the potential of the scheme for precision state engineering. The scheme is extended to generate higher-order soliton modes which are yet to be experimentally realised. A machine learning algorithm based on Gaussian processes was developed and implemented on the evaporative cooling stage of the production of a 87Rb Bose-Einstein condensate, successfully demonstrating fast optimisation to condensation. The Gaussian process develops a statistical model based on the data that enables the characterisation of the relationship between the experimental controls and resultant quality of the BEC. This relationship is often obfuscated through technical details of the apparatus, frustrating the use of theoretical models to design optimal evaporation ramps. These models often only consider ergodic dynamics with two-body s-wave interactions and no other loss rates with better ramps likely exploiting more complex interactions. The internal model generated from the Gaussian process utilised uncertainty in measured data, making the optimisation more robust to experimental noise than alternate methods. The algorithm is shown to produce high quality Bose-Einstein condensates in 10 times fewer experimental iterations than previously used online optimisation techniques. By exploiting information on the sensitivity of each control, the model can be used to aid experimental design. The convergence of the optimisation is further improved by eliminating a superfluous parameter identified by the model. The general usefulness of machine learning compared with bespoke optimisation algorithms has seen machine learning approach ubiquity. Finally, an experimentally straightforward technique for continuous non-destructive imaging of matter-wave solitons was developed and implemented, facilitating measurements of stochastic phenomena. The technique is readily practicable on any ultracold atom experiment with an existing absorption imaging system, simply requiring the probe laser be far-detuned from resonance. With a signal-to-noise of ∼ 33 at 1.25 GHz detuning, the technique is capable of producing 100 images with no observable heating or atom loss. Coupled with a fast optical phase locked loop, the technique can be used in conjunction with absorption imaging to generate a series of non-destructive images followed by a final high signal-to-noise absorption image solely through moving the laser on resonance for the final image. The high performance and utility of this imaging setup make it a powerful tool for ultra-cold atom experiments.
Experiments with ultracold gases have assumed a significant role in atomic physics with direct and major relevance in condensed matter and many other areas of physics. We give a few examples of studies that have been carried out with these systems since the first production of a Bose–Einstein condensate in a dilute atomic vapour in 1995. We discuss in particular early studies of the formation and growth of condensates, excitations of Bose–Einstein condensates, and more recent investigations of strongly correlated systems, arising in optical lattices, near Feshbach resonances, and in restricted geometries of effiective low dimensionality. The understanding of such experiments requires advanced finitetemperature non-equilibrium theories, the discussion of which forms the basis for this book.
Quantum technology devices are approaching a level of maturity, which would allow for adoption by non-specialist users. The advancements made in microprocessor-based electronics and database software can be combined to create a flexible, efficient, and modular experimental monitoring system. We present an example of such a monitoring system where key experimental parameters such as vacuum pressure, laser beam powers and electrical currents across a network of cold atom laboratories are monitored. The ability to passively collect data and cross-diagnose issues reduces debugging time and allows for efficient control over several cold atom experiments. This level of control facilitates the progression of atomic physics experiments. In my talk, I will show how using such a monitoring system has led to the production of a Bose-Einstein condensate (BEC) from home in one of our laboratories that did not have a BEC before.
In this habilitation-thesis a collection of 14 experiments is presented. In these experiments we have developed and used novel techniques to control ultracold gases on the quantum level. In brief, Bose-Einstein condensates (BEC) and degenerate Fermi gases of laser-cooled alkali atoms are subjected to specially designed optical and magnetic fields. The fields influence in a coherent way the behavior, properties and dynamics of the gases. On this basis we developed tools to prepare, coherently manipulate, and analyze pre-defined quantum states. With this high level of control, it was possible to investigate interesting physics phenomena, and we were able to achieve several breakthroughs in the field of ultracold atoms. Highlights of our experimental results include the demonstration of phase engineering of a BEC wavefunction where we created solitons in a BEC and studied their propagation. In another experiment we constructed a spatially resolved matter wave interferometer with which we mapped out the phase distribution on a condensate. Illuminating the BEC with a periodic pattern, i.e. an optical lattice, allowed us to study solid states physics phenomena. In a second set of experiments we demonstrated optically tuning of the interaction between atoms with optical Feshbach resonances. Employing either magnetically tunable Feshbach resonances or laser radiation, we were able to produce ground state molecules in well defined quantum states. This led to the production of the first molecular BEC. By tuning the coupling of atom pairs in a Fermi gas of atoms, we could for the first time investigate the so-called BEC-BCS crossover which describes the continuous change from a BEC superfluid to a Bardeen-Cooper Schrieffer (BCS) superfluid. Due to the excellent control on the quantum level, the developed cold atom techniques open up intriguing prospects for future applications and experiments. They represent a general tool box to investigate fundamental physical phenomena in a pure and undisturbed environment. In the future, cold atoms might serve as a testing ground for fundamental theories or as quantum simulators for complex systems.
Besides the enormous opportunities offered by spectroscopy and atom interferometry, laser cooling has opened up the possibility of experimentally realizing and manipulating quantum degenerate gases: Bose–Einstein condensates and degenerate Fermionic systems. This chapter starts with an illustration of key experimental techniques, such as magnetic trapping, evaporative cooling, and Feshbach resonances. It then turns to the physics of atomic Bose–Einstein condensates, discussing their superfluid behaviour, their coherence properties, and their application to precise measurements. It also describes the experimental investigation of ultracold Fermi gases and fermionic superfluidity, as well as ongoing research into ultracold polar molecules.