Challenges
Datasets
Workspaces
Papers
Discussions
Leaderboard
Log inSign up
Challenges
Datasets
Workspaces
Papers
Discussions
Leaderboard
Blog
Job Board
Q3AS

© 2026 Aqora Quantum S.A.S.

TermsPrivacyLegal Notice

arXiv:2101.10362 · Quantum Science and Technology

A micro-optical module for multi-wavelength addressing of trapped ions

Matthew L Day, Kaushal Choonee, Zachary Chaboyer, Simon Gross, Michael J. Withford, Alastair G Sinclair, Graham D Marshall

Published Jan 22, 2021• 13 citations
arXivHTMLPDF

Abstract

Abstract The control of large-scale quantum information processors based on arrays of trapped ions requires a means to route and focus multiple laser beams to each of many trapping sites in parallel. Here, we combine arrays of fibres, 3D laser-written waveguides and diffractive microlenses to demonstrate the principle of a micro-optic interconnect suited to this task. The module is intended for use with an ion microtrap of 3D electrode geometry. It guides ten independent laser beams with unique trajectories to illuminate a pair of spatially separated target points. Three blue and two infrared beams converge to overlap precisely at each desired position. Typical relative crosstalk intensities in the blue are 3.6 × 10−3 and the average insertion loss across all channels is 8 dB. The module occupies ∼104 times less volume than a conventional bulk-optic equivalent and is suited to different ion species.

DOI
10.1088/2058-9565/abdf38

Related papers

Individual trapped-ion addressing with adjoint-optimized multimode photonic circuits

Melika Momenzadeh, Ke Sun, Qiming Wu +4 more

Trapped-ion quantum computing requires precise optical control for individual qubit manipulation. However, conventional free-space optics face challenges in alignment stability and scalability as the number of qubits increases. Integrated photonics offers a promising alternative, providing miniaturized optical systems on a chip. Here, we propose a design for a multimode photonic circuit integrated with a surface-electrode ion trap capable of targeted and reconfigurable light delivery. Three closely positioned ions can be addressed using a focusing grating coupler that emits multimode light through electrode openings to ions trapped 68 μm above the chip. Simulations show that the couplers achieve a diffraction-limited spot with a 4.3 μm beam waist along the trap axis and 2.2 μm perpendicular to the trap axis. Controlled interference of the TE 00 and TE 10 modes results in crosstalk of –20 dB to –30 dB at ion separations of 5–8 μm when addressing ions individually, and down to –60 dB when two of the three ions are addressed simultaneously. Additionally, the higher-order TE modes can offer a novel mechanism for driving spin-motion coupling transitions, potentially enabling alternative approaches to quantum gates and simulations. The proposed integrated platform offers a viable path for constructing large-scale trapped-ion systems, leveraging the benefits of nanophotonic design for precise and reliable ion manipulation.

arXiv:2505.08997•npj Nanophotonics•Jan 27, 2026•6 citations

Laser-based manipulation and readout for multi-ion traps in quantum computing (Conference Presentation)

Erik Beckert, Christoph A. Wächter, Bernd Höfer +1 more

Ion traps are one approach to represent Qubits in future quantum computer architectures. Nevertheless, progress has to be made to scale ion trap setups for multiple ions and qubit scaling. Next to the ion trap architecture itself the manipulation of the ion’s state and their readout by means of a laser and fluorescence detection optics are key architectural building blocks. A setup dedicated to the optical addressing of each individual ion in the trap will be described, consisting of micro-optics for diffraction limited focusing of the laser beam onto the ion and a miniaturized actuation mechanism for the micron scale movement of the focus with the ion, where the electrical feedback signal stems from the detection unit. The setup’s design with an initial layout for up to 10 ions in parallel can further be scaled towards ca. 50 ions in parallel at least. Publisher’s Note: The manuscript PDF, originally published on 5 March 2021, was withdrawn on 12 March 2021 per author request.

Quantum Computing, Communication, and Simulation•Mar 4, 2021•0 citations

Chiplet technology for large-scale trapped-ion quantum processors

Bassem Badawi, Philip C. Holz, Michael Raffetseder +6 more

Trapped ions are among the most promising platforms for realizing a large-scale quantum information processor. Current progress focuses on integrating optical and electronic components into microfabricated ion traps to allow scaling to large numbers of ion qubits. Most available fabrication strategies for such integrated processors employ monolithic integration of all processor components and rely heavily on CMOS-compatible semiconductor fabrication technologies that are not optimized for the requirements of a trapped-ion quantum processor. In this work, we present a modular approach in which the processor modules, called chiplets, have specific functions and are fabricated separately. The individual chiplets are then combined using heterogeneous integration techniques. This strategy opens up the possibility of choosing the optimal materials and fabrication technology for each of the chiplets, with a minimum amount of fabrication limitations compared to the monolithic approach. Chiplet technology furthermore enables novel processor functionalities to be added in a cost-effective, modular fashion by adding or modifying only a subset of the chiplets. We describe the design concept of a chiplet-based trapped-ion quantum processor and demonstrate the technology with an example of an integrated individual-ion addressing system for a ten-ion crystal. The addressing system emphasizes the modularity of the chiplet approach, combining a surface ion trap manufactured on a glass substrate with a silicon substrate carrying integrated waveguides and a stack of 3D-printed micro-optics, achieving diffraction-limited focal spots at the ion positions.

quant-pharXiv:2512.02645•Dec 3, 2025•7 citations

Integrated and fiber-coupled imaging system for the addressing of single ions

Marcus Babin, Michael Reibe, Steffen Trautmann +3 more

In trapped-ion-based quantum computing, logic gates are performed by laser addressing ions with a specific wavelength to manipulate its quantum state. We present a trap-integrated addressing unit that is ultra-high vacuum compatible and quasi-monolithically bonded onto the trap substrate. Our setup is based on a quadrupole trap for containing a chain of ten calcium ion. A fiber-coupled aluminum oxide waveguide chip emits ten addressing beams at 405 nm, that are imaged by a micro-optical lens stack onto the ion trap axis. The setup allows to address each ion individually and in parallel. Imaging transmission losses are below 2 dB with an ion-addressing spot diameter of 1 µm at 1/e^2 intensity and a Strehl ratio above 0.9 for all ten beams. With an inner minimum ion spacing of 5 µm and a total chain length of approximately 60 µm, the addressing beam crosstalk ratio is less than one percent.

SPIE Quantum Information Science, Sensing, and Computation•May 30, 2025•0 citations

A broadband, individually addressing two- and three-dimensional photonic integrated circuit for trapped-ion qubit control

Daniel Klawson, Yiyang Zhi, Bingran You +21 more

Trapped ions provide a high-fidelity platform for quantum information processing, yet delivery of multiple, distinct wavelengths across large networks of interaction zones remains a bottleneck. Conventional free-space light delivery lacks scalability, while on-chip grating couplers suffer from narrow operational bandwidth that increases circuit footprint and optical interfacing complexity. Here we show a broadband photonic integrated circuit capable of addressing individual ions. The circuit combines a planar waveguide lens with a micromirror fabricated using two-photon polymerization at wafer scale. This implementation can address three individual ions from $λ$ = 405 - 880 nm with -27 dB average intensity crosstalk at $5\,μ\mathrm{m}$ pitch. We trap $^{40}\mathrm{Ca}^{+}$ and $^{138}\mathrm{Ba}^{+}$ ions above such devices, characterize optical crosstalk with barium ions, and demonstrate individual repumping of calcium ions. This monolithic photonic architecture brings broadband addressing in an on-chip modality to trapped-ion technology. More generally, integrating additive manufacturing into quantum devices is poised to unlock expanded design space for implementing novel quantum architectures.

quant-pharXiv:2607.25062•Jul 29, 2026•0 citations

3D interconnects and multi-module integrated surface electrode ion trap for scalable quantum information processing

Peng Zhao

Among the various physical systems for quantum bit (qubit) implementation, trapped ion has drawn significant attention due to its long coherence time (in the second range) and high gate fidelity (>99.99% for single qubit gate). After years of careful development, the ion trap, from mechanically assembled linear trap to lithography-defined surface electrode ion trap, is compatible with CMOS fabrication, which opens the door for the high-resolution, high-repeatability and large-scale ion trap manufacturing. To date, the number of fully connected ion qubits in state-of-the-art ion trapping devices is ~10. However, to scale close to or even beyond the noisy intermediate-scale quantum regime (NISQ, ~100 ions), some challenges remain. One such challenge is to maintain the delicate control of multiple components over individual ion with increasing ion number. In such context, this thesis is committed to boost the scalability of ion trap by integrating advanced 3D interconnects (e.g., through silicon via) and other functional modules (e.g., silicon photonics and multilayer metallization). 3D interconnects are integrated in the half space underneath surface electrode, to replace conventional wire bonding that extends out of the surface. Silicon photonics (grating coupler and waveguide) in place of bulk optics and lenses are used for on-chip light routing and emission. Multilayer metallization is used to maintain the overall RF performance and enable high-density interconnection where necessary. Firstly, surface electrode ion traps on different substrates (namely high resistivity silicon, silicon with grounding plane and glass) are designed and fabricated. Standard CMOS back-end-of-line fabrication process on 12-inch wafer platform is employed. The electrical performances of different traps are compared in terms of leakage current (I-V), parasitic capacitance (C-V), on-chip RF loss (S-parameter) and post-packaging resonance. Though the leakage (at the order of 10-8 A) between neighboring electrodes is relatively high, ion trap on glass substrate demonstrates extremely small capacitance (<1 pF) and low RF loss (insertion loss of <0.05 dB at RF frequency of 50 MHz), as compared to the silicon counterparts. This is mainly due to excellent insulation property of glass. Following that, ion trapping test is performed on the glass trap and ions are successfully confined with an averaged lifetime of ~30 minutes (compatible with the 10-11 mbar vacuum level (10-13 Pa)). To simultaneously leverage the dielectric property of glass and the microfabrication compatibility of silicon, the integration of silicon ion trap and glass interposer is performed, between which TSV is used to build the vertical interconnection. Due to the incorporation of TSV, the original wire bonding pads as well as the connection circuits on the surface electrodes can be eliminated. As a result, the form factor of TSV integrated trap is reduced by ~10 times. Correspondingly, the parasitic capacitance between neighboring electrodes is reduced from >24 pF to 3 pF. Similarly, the insertion loss of TSV integrated trap drops to 0.11 dB, in sharp comparison to the previous traps on silicon substrates (up to 2.4 dB). Analytical models are built to respectively characterize the electrode capacitance and overall power loss, and a good agreement is achieved between the model and the measurement result. In addition, since TSV is located in the half space underneath the surface electrodes, the electrodes geometry design is enabled with high flexibility. Meanwhile, the laser obstruction issue due to the stick-out bonding wires has been resolved. In terms of the ion trapping performance, both the heating rate (17 quanta/ms for an axial frequency of 300 kHz) and the lifetime (~30 minutes) of TSV trap are comparable with non-cryogenic traps of similar dimensions. Moreover, a customized CPGA with patterned redistribution layer is used to locate TSV integrated trap directly in the absence of glass interposer, facilitating high-efficiency thermal management and upgrading the packaging flexibility. At the next stage, the co-integration of other functional modules such as silicon photonics and multilayer metallization with TSV trap is investigated. In silicon photonics module, waveguide and grating coupler are on-chip introduced in place of bulk optics to achieve localized light routing and emission. In multilayer metallization module, as a first step, a grounding plane is incorporated into TSV trap to shield the silicon substrate from RF signal, in which specific windows are patterned onto the plane to accommodate TSV and allow the transmission of lights. The compatibility between TSV/multilayer metallization and waveguide/grating coupler for electrical and optical (E/O) signal routing is demonstrated. The preliminary test result based on wafer frontside shows that a ~40% capacitance reduction is achieved, and the insertion loss further drops to 0.06 dB, close to the performance of glass trap. In addition, the simulation results on photonics components indicate that an overall coupling efficiency of <30 dB is obtained from the input fiber to the ion through the photonics circuit. However, the measured power loss for light with wavelength of 1092 nm is as high as 50 dB. The deviation between the simulation and measurement is largely due to the fabrication imperfection and the resultant sloped grating coupler profile. This thesis focuses on the scalability enhancement of ion trap by integrating TSV, silicon photonics and multilayer metallization into conventional ion trap. The results are promising and pave the way for the future large scale quantum computing based on trapped ion.

•Jan 1, 2022•0 citations
Abstract The control of large-scale quantum information processors based on arrays of trapped ions requires a means to route and focus multiple laser beams to each of many trapping sites in parallel. Here, we combine arrays of fibres, 3D laser-written waveguides and diffractive microlenses to demonstrate the principle of a micro-optic interconnect suited to this task. The module is intended for use with an ion microtrap of 3D electrode geometry. It guides ten independent laser beams with unique trajectories to illuminate a pair of spatially separated target points. Three blue and two infrared beams converge to overlap precisely at each desired position. Typical relative crosstalk intensities in the blue are 3.6 × 10−3 and the average insertion loss across all channels is 8 dB. The module occupies ∼104 times less volume than a conventional bulk-optic equivalent and is suited to different ion species.
Trapped-ion quantum computing requires precise optical control for individual qubit manipulation. However, conventional free-space optics face challenges in alignment stability and scalability as the number of qubits increases. Integrated photonics offers a promising alternative, providing miniaturized optical systems on a chip. Here, we propose a design for a multimode photonic circuit integrated with a surface-electrode ion trap capable of targeted and reconfigurable light delivery. Three closely positioned ions can be addressed using a focusing grating coupler that emits multimode light through electrode openings to ions trapped 68 μm above the chip. Simulations show that the couplers achieve a diffraction-limited spot with a 4.3 μm beam waist along the trap axis and 2.2 μm perpendicular to the trap axis. Controlled interference of the TE 00 and TE 10 modes results in crosstalk of –20 dB to –30 dB at ion separations of 5–8 μm when addressing ions individually, and down to –60 dB when two of the three ions are addressed simultaneously. Additionally, the higher-order TE modes can offer a novel mechanism for driving spin-motion coupling transitions, potentially enabling alternative approaches to quantum gates and simulations. The proposed integrated platform offers a viable path for constructing large-scale trapped-ion systems, leveraging the benefits of nanophotonic design for precise and reliable ion manipulation.
Ion traps are one approach to represent Qubits in future quantum computer architectures. Nevertheless, progress has to be made to scale ion trap setups for multiple ions and qubit scaling. Next to the ion trap architecture itself the manipulation of the ion’s state and their readout by means of a laser and fluorescence detection optics are key architectural building blocks. A setup dedicated to the optical addressing of each individual ion in the trap will be described, consisting of micro-optics for diffraction limited focusing of the laser beam onto the ion and a miniaturized actuation mechanism for the micron scale movement of the focus with the ion, where the electrical feedback signal stems from the detection unit. The setup’s design with an initial layout for up to 10 ions in parallel can further be scaled towards ca. 50 ions in parallel at least. Publisher’s Note: The manuscript PDF, originally published on 5 March 2021, was withdrawn on 12 March 2021 per author request.
Trapped ions are among the most promising platforms for realizing a large-scale quantum information processor. Current progress focuses on integrating optical and electronic components into microfabricated ion traps to allow scaling to large numbers of ion qubits. Most available fabrication strategies for such integrated processors employ monolithic integration of all processor components and rely heavily on CMOS-compatible semiconductor fabrication technologies that are not optimized for the requirements of a trapped-ion quantum processor. In this work, we present a modular approach in which the processor modules, called chiplets, have specific functions and are fabricated separately. The individual chiplets are then combined using heterogeneous integration techniques. This strategy opens up the possibility of choosing the optimal materials and fabrication technology for each of the chiplets, with a minimum amount of fabrication limitations compared to the monolithic approach. Chiplet technology furthermore enables novel processor functionalities to be added in a cost-effective, modular fashion by adding or modifying only a subset of the chiplets. We describe the design concept of a chiplet-based trapped-ion quantum processor and demonstrate the technology with an example of an integrated individual-ion addressing system for a ten-ion crystal. The addressing system emphasizes the modularity of the chiplet approach, combining a surface ion trap manufactured on a glass substrate with a silicon substrate carrying integrated waveguides and a stack of 3D-printed micro-optics, achieving diffraction-limited focal spots at the ion positions.
In trapped-ion-based quantum computing, logic gates are performed by laser addressing ions with a specific wavelength to manipulate its quantum state. We present a trap-integrated addressing unit that is ultra-high vacuum compatible and quasi-monolithically bonded onto the trap substrate. Our setup is based on a quadrupole trap for containing a chain of ten calcium ion. A fiber-coupled aluminum oxide waveguide chip emits ten addressing beams at 405 nm, that are imaged by a micro-optical lens stack onto the ion trap axis. The setup allows to address each ion individually and in parallel. Imaging transmission losses are below 2 dB with an ion-addressing spot diameter of 1 µm at 1/e^2 intensity and a Strehl ratio above 0.9 for all ten beams. With an inner minimum ion spacing of 5 µm and a total chain length of approximately 60 µm, the addressing beam crosstalk ratio is less than one percent.
Trapped ions provide a high-fidelity platform for quantum information processing, yet delivery of multiple, distinct wavelengths across large networks of interaction zones remains a bottleneck. Conventional free-space light delivery lacks scalability, while on-chip grating couplers suffer from narrow operational bandwidth that increases circuit footprint and optical interfacing complexity. Here we show a broadband photonic integrated circuit capable of addressing individual ions. The circuit combines a planar waveguide lens with a micromirror fabricated using two-photon polymerization at wafer scale. This implementation can address three individual ions from λλλ = 405 - 880 nm with -27 dB average intensity crosstalk at 5 μm5\,μ\mathrm{m}5μm pitch. We trap 40Ca+^{40}\mathrm{Ca}^{+}40Ca+ and 138Ba+^{138}\mathrm{Ba}^{+}138Ba+ ions above such devices, characterize optical crosstalk with barium ions, and demonstrate individual repumping of calcium ions. This monolithic photonic architecture brings broadband addressing in an on-chip modality to trapped-ion technology. More generally, integrating additive manufacturing into quantum devices is poised to unlock expanded design space for implementing novel quantum architectures.
Among the various physical systems for quantum bit (qubit) implementation, trapped ion has drawn significant attention due to its long coherence time (in the second range) and high gate fidelity (>99.99% for single qubit gate). After years of careful development, the ion trap, from mechanically assembled linear trap to lithography-defined surface electrode ion trap, is compatible with CMOS fabrication, which opens the door for the high-resolution, high-repeatability and large-scale ion trap manufacturing. To date, the number of fully connected ion qubits in state-of-the-art ion trapping devices is ~10. However, to scale close to or even beyond the noisy intermediate-scale quantum regime (NISQ, ~100 ions), some challenges remain. One such challenge is to maintain the delicate control of multiple components over individual ion with increasing ion number. In such context, this thesis is committed to boost the scalability of ion trap by integrating advanced 3D interconnects (e.g., through silicon via) and other functional modules (e.g., silicon photonics and multilayer metallization). 3D interconnects are integrated in the half space underneath surface electrode, to replace conventional wire bonding that extends out of the surface. Silicon photonics (grating coupler and waveguide) in place of bulk optics and lenses are used for on-chip light routing and emission. Multilayer metallization is used to maintain the overall RF performance and enable high-density interconnection where necessary. Firstly, surface electrode ion traps on different substrates (namely high resistivity silicon, silicon with grounding plane and glass) are designed and fabricated. Standard CMOS back-end-of-line fabrication process on 12-inch wafer platform is employed. The electrical performances of different traps are compared in terms of leakage current (I-V), parasitic capacitance (C-V), on-chip RF loss (S-parameter) and post-packaging resonance. Though the leakage (at the order of 10-8 A) between neighboring electrodes is relatively high, ion trap on glass substrate demonstrates extremely small capacitance (<1 pF) and low RF loss (insertion loss of <0.05 dB at RF frequency of 50 MHz), as compared to the silicon counterparts. This is mainly due to excellent insulation property of glass. Following that, ion trapping test is performed on the glass trap and ions are successfully confined with an averaged lifetime of ~30 minutes (compatible with the 10-11 mbar vacuum level (10-13 Pa)). To simultaneously leverage the dielectric property of glass and the microfabrication compatibility of silicon, the integration of silicon ion trap and glass interposer is performed, between which TSV is used to build the vertical interconnection. Due to the incorporation of TSV, the original wire bonding pads as well as the connection circuits on the surface electrodes can be eliminated. As a result, the form factor of TSV integrated trap is reduced by ~10 times. Correspondingly, the parasitic capacitance between neighboring electrodes is reduced from >24 pF to 3 pF. Similarly, the insertion loss of TSV integrated trap drops to 0.11 dB, in sharp comparison to the previous traps on silicon substrates (up to 2.4 dB). Analytical models are built to respectively characterize the electrode capacitance and overall power loss, and a good agreement is achieved between the model and the measurement result. In addition, since TSV is located in the half space underneath the surface electrodes, the electrodes geometry design is enabled with high flexibility. Meanwhile, the laser obstruction issue due to the stick-out bonding wires has been resolved. In terms of the ion trapping performance, both the heating rate (17 quanta/ms for an axial frequency of 300 kHz) and the lifetime (~30 minutes) of TSV trap are comparable with non-cryogenic traps of similar dimensions. Moreover, a customized CPGA with patterned redistribution layer is used to locate TSV integrated trap directly in the absence of glass interposer, facilitating high-efficiency thermal management and upgrading the packaging flexibility. At the next stage, the co-integration of other functional modules such as silicon photonics and multilayer metallization with TSV trap is investigated. In silicon photonics module, waveguide and grating coupler are on-chip introduced in place of bulk optics to achieve localized light routing and emission. In multilayer metallization module, as a first step, a grounding plane is incorporated into TSV trap to shield the silicon substrate from RF signal, in which specific windows are patterned onto the plane to accommodate TSV and allow the transmission of lights. The compatibility between TSV/multilayer metallization and waveguide/grating coupler for electrical and optical (E/O) signal routing is demonstrated. The preliminary test result based on wafer frontside shows that a ~40% capacitance reduction is achieved, and the insertion loss further drops to 0.06 dB, close to the performance of glass trap. In addition, the simulation results on photonics components indicate that an overall coupling efficiency of <30 dB is obtained from the input fiber to the ion through the photonics circuit. However, the measured power loss for light with wavelength of 1092 nm is as high as 50 dB. The deviation between the simulation and measurement is largely due to the fabrication imperfection and the resultant sloped grating coupler profile. This thesis focuses on the scalability enhancement of ion trap by integrating TSV, silicon photonics and multilayer metallization into conventional ion trap. The results are promising and pave the way for the future large scale quantum computing based on trapped ion.