Challenges
Datasets
Workspaces
Papers
Discussions
Leaderboard
Log inSign up
Challenges
Datasets
Workspaces
Papers
Discussions
Leaderboard
Blog
Job Board
Q3AS

© 2026 Aqora Quantum S.A.S.

TermsPrivacyLegal Notice

arXiv:2101.05815 · Nature Communications

Kerr reversal in Josephson meta-material and traveling wave parametric amplification

Arpit Ranadive, Martina Esposito, Luca Planat, Edgar Bonet, Cécile Naud, O. Buisson, Wiebke Guichard, Nicolas Roch

Published Apr 1, 2022• 117 citations
arXivHTMLPDF

Abstract

Josephson meta-materials have recently emerged as very promising platform for superconducting quantum science and technologies. Their distinguishing potential resides in ability to engineer them at sub-wavelength scales, which allows complete control over wave dispersion and nonlinear interaction. In this article we report a versatile Josephson transmission line with strong third order nonlinearity which can be tuned from positive to negative values, and suppressed second order non linearity. As an initial implementation of this multipurpose meta-material, we operate it to demonstrate reversed Kerr phase-matching mechanism in traveling wave parametric amplification. Compared to previous state of the art phase matching approaches, this reversed Kerr phase matching avoids the presence of gaps in transmission, can reduce gain ripples, and allows in situ tunability of the amplification band over an unprecedented wide range. Besides such notable advancements in the amplification performance with direct applications to superconducting quantum computing and generation of broadband squeezing, the in-situ tunability with sign reversal of the nonlinearity in traveling wave structures, with no counterpart in optics to the best of our knowledge, opens exciting experimental possibilities in the general framework of microwave quantum optics, single-photon detection and quantum limited amplification.

DOI
10.1038/s41467-022-29375-5

Related papers

Josephson traveling-wave parametric amplifier with inverse Kerr phase matching

M. T. Bell

Superconducting traveling-wave parametric amplifiers (TWPA) have emerged as highly versatile devices, offering broadband amplification with quantum-limited noise performance. They hold significant potential for addressing the readout bottleneck in prototype quantum computers, enabling scalability. Key challenges with this technology include achieving sufficient gain with minimal gain ripple while maintaining low noise performance. Efficient phase matching between a weak signal and a strong pump over the entire length of the TWPA is critical to overcoming these challenges. We present an experimental demonstration of the inverse Kerr phase matching technique in a TWPA, first proposed in Ref. Phys. Rev. Appl. 4, 024014. This method addresses several limitations of conventional dispersion engineering approaches of phase matching in the four-wave mixing parametric process in TWPAs. Most notably the existence of an unusable region of gain near the pump frequency which typically corresponds to the region of most optimal phase matching and maximum gain. The inverse Kerr phase matching approach, allows for greater frequency separation between the region of optimal gain and pump, \textit{in situ} tunability of the pump, minimal gain ripple, and a compact footprint which reduces losses. A TWPA employing the inverse Kerr phase matching technique experimentally demonstrated 20 dB of gain over a 3 GHz instantaneous bandwidth, with a tunable bandwidth of 8 GHz, minimal gain ripple, and near quantum-limited noise performance, with 1.5 photons of added noise.

arXiv:2507.17039•Physical Review Applied•Dec 23, 2025•4 citations

Field-induced phase-matching in Josephson traveling wave parametric amplifiers

Daniil E. Bazulin, S. Gandorfer, N. Bruckmoser +9 more

Superconducting Josephson traveling wave parametric amplifiers (JTWPAs) enable broadband, quantum-limited amplification of weak microwave signals. JTWPAs are essential for the single-shot readout of superconducting qubits, broadband vacuum squeezing, or the generation of microwave cluster states. Phase-matching between signal and pump modes in such JTWPAs represents a major engineering challenge, which is typically solved by integrating resonators in a nonlinear medium in order to tailor electromagnetic dispersion relations and achieve a broadband, high-gain amplification. Here, we experimentally demonstrate a phase-matching approach using a homogeneous nonlinear medium based on Josephson elements by exploiting a magnetic field inhomogeneity. We show how the latter may lead to the sign reversal of the 3-wave mixing nonlinearity and stabilization of the parametric amplification. We envision this technique as a viable alternative to conventional phase-matching approaches.

arXiv:2611.13084•Nov 9, 2026•0 citations

Josephson Metamaterial with a Widely Tunable Positive or Negative Kerr Constant

Wenyuan Zhang, W. Huang, M. E. Gershenson +1 more

The optical Kerr effect, in which a medium's refractive index is affected by the intensity of the transmitted light, is exploited not only in conventional optics, but also in superconducting circuits. This article reports a Josephson-junction-based metamaterial with a widely tunable Kerr constant that can even change sign. Controlled by an external magnetic field, this material can speed up or slow down the phase velocity of light per the intensity of the propagating electromagnetic wave. Such an engineered medium could be used for phase matching in traveling-wave parametric amplifiers, or in superconducting hardware for encoding or reading out quantum information.

arXiv:1707.06834•Physical Review Applied•Nov 13, 2017•36 citations

Self-phase-matched broadband amplification with a left-handed Josephson transmission line

C. Kow, Viktor A. Podolskiy, Archana Kamal

Josephson traveling-wave parametric amplifiers (JTWPAs) are promising platforms for realizing broadband quantum-limited amplification of microwave signals. However, substantial gain in such systems is attainable only when strict constraints on phase matching of the signal, idler, and pump waves are satisfied---this is rendered particularly challenging in the presence of nonlinear effects, such as self- and cross-phase modulation, which scale with the intensity of propagating signals. In this work, we present a simple JTWPA based on ``left-handed'' (negative-index) nonlinear Josephson metamaterial, which has phase matching native to its design, precluding the need for any complicated circuit or dispersion engineering. The resultant efficiency of the four-wave-mixing process can implement gains in excess of 20 dB over few-gigahertz bandwidths with much shorter lines than previous implementations. Furthermore, the intrinsic phase matching considerably simplifies the JTWPA design and operation compared to the previous implementations based on ``right-handed'' (positive-index) Josephson metamaterials, making the proposed architecture particularly appealing for integration with large superconducting architectures. The left-handed Josephson transmission line introduced here constitutes an alternative modality in distributed Josephson circuits, and forms a crucial piece of the unified framework that can be used to inform the optimal design and operation of broadband microwave amplifiers.

arXiv:2201.04660•Physical Review Applied•Aug 11, 2025•14 citations

A near–quantum-limited Josephson traveling-wave parametric amplifier

Chris Macklin, Kevin P. O’Brien, David J. Hover +5 more

Detecting single-photon level signals—carriers of both classical and quantum information—is particularly challenging for low-energy microwave frequency excitations. Here we introduce a superconducting amplifier based on a Josephson junction transmission line. Unlike current standing-wave parametric amplifiers, this traveling wave architecture robustly achieves high gain over a bandwidth of several gigahertz with sufficient dynamic range to read out 20 superconducting qubits. To achieve this performance, we introduce a subwavelength resonant phase-matching technique that enables the creation of nonlinear microwave devices with unique dispersion relations. We benchmark the amplifier with weak measurements, obtaining a high quantum efficiency of 75% (70% including noise added by amplifiers following the Josephson amplifier). With a flexible design based on compact lumped elements, this Josephson amplifier has broad applicability to microwave metrology and quantum optics.

Science•Sep 3, 2015•875 citations

Photonic-Crystal Josephson Traveling-Wave Parametric Amplifier

Luca Planat, Arpit Ranadive, Rémy Dassonneville +7 more

A microwave amplifier combining noise performances as close as possible to the quantum limit with large bandwidth and high saturation power is highly desirable for many solid-state quantum technologies.Here, we introduce a new traveling-wave parametric amplifier based on superconducting quantum interference devices.It displays a 3-GHz bandwidth, a -100-dBm saturation (1-dB compression) point and added noise near the quantum limit.Compared to the previous state of the art, it is an order of magnitude more compact, its characteristic impedance is in situ tunable, and its fabrication process requires only two lithography steps.The key is the engineering of a gap in the dispersion relation of the transmission line.This is obtained using a periodic modulation of the SQUID size, similarly to what is done with photonic crystals.Moreover, we provide a new theoretical treatment to describe the nontrivial interplay between nonlinearity and such periodicity.Our approach provides a path to cointegration with other quantum devices such as qubits given the low footprint and easy fabrication of our amplifier.

arXiv:1907.10158•Physical Review X•Apr 28, 2020•145 citations
Josephson meta-materials have recently emerged as very promising platform for superconducting quantum science and technologies. Their distinguishing potential resides in ability to engineer them at sub-wavelength scales, which allows complete control over wave dispersion and nonlinear interaction. In this article we report a versatile Josephson transmission line with strong third order nonlinearity which can be tuned from positive to negative values, and suppressed second order non linearity. As an initial implementation of this multipurpose meta-material, we operate it to demonstrate reversed Kerr phase-matching mechanism in traveling wave parametric amplification. Compared to previous state of the art phase matching approaches, this reversed Kerr phase matching avoids the presence of gaps in transmission, can reduce gain ripples, and allows in situ tunability of the amplification band over an unprecedented wide range. Besides such notable advancements in the amplification performance with direct applications to superconducting quantum computing and generation of broadband squeezing, the in-situ tunability with sign reversal of the nonlinearity in traveling wave structures, with no counterpart in optics to the best of our knowledge, opens exciting experimental possibilities in the general framework of microwave quantum optics, single-photon detection and quantum limited amplification.
Superconducting traveling-wave parametric amplifiers (TWPA) have emerged as highly versatile devices, offering broadband amplification with quantum-limited noise performance. They hold significant potential for addressing the readout bottleneck in prototype quantum computers, enabling scalability. Key challenges with this technology include achieving sufficient gain with minimal gain ripple while maintaining low noise performance. Efficient phase matching between a weak signal and a strong pump over the entire length of the TWPA is critical to overcoming these challenges. We present an experimental demonstration of the inverse Kerr phase matching technique in a TWPA, first proposed in Ref. Phys. Rev. Appl. 4, 024014. This method addresses several limitations of conventional dispersion engineering approaches of phase matching in the four-wave mixing parametric process in TWPAs. Most notably the existence of an unusable region of gain near the pump frequency which typically corresponds to the region of most optimal phase matching and maximum gain. The inverse Kerr phase matching approach, allows for greater frequency separation between the region of optimal gain and pump, \textit{in situ} tunability of the pump, minimal gain ripple, and a compact footprint which reduces losses. A TWPA employing the inverse Kerr phase matching technique experimentally demonstrated 20 dB of gain over a 3 GHz instantaneous bandwidth, with a tunable bandwidth of 8 GHz, minimal gain ripple, and near quantum-limited noise performance, with 1.5 photons of added noise.
Superconducting Josephson traveling wave parametric amplifiers (JTWPAs) enable broadband, quantum-limited amplification of weak microwave signals. JTWPAs are essential for the single-shot readout of superconducting qubits, broadband vacuum squeezing, or the generation of microwave cluster states. Phase-matching between signal and pump modes in such JTWPAs represents a major engineering challenge, which is typically solved by integrating resonators in a nonlinear medium in order to tailor electromagnetic dispersion relations and achieve a broadband, high-gain amplification. Here, we experimentally demonstrate a phase-matching approach using a homogeneous nonlinear medium based on Josephson elements by exploiting a magnetic field inhomogeneity. We show how the latter may lead to the sign reversal of the 3-wave mixing nonlinearity and stabilization of the parametric amplification. We envision this technique as a viable alternative to conventional phase-matching approaches.
The optical Kerr effect, in which a medium's refractive index is affected by the intensity of the transmitted light, is exploited not only in conventional optics, but also in superconducting circuits. This article reports a Josephson-junction-based metamaterial with a widely tunable Kerr constant that can even change sign. Controlled by an external magnetic field, this material can speed up or slow down the phase velocity of light per the intensity of the propagating electromagnetic wave. Such an engineered medium could be used for phase matching in traveling-wave parametric amplifiers, or in superconducting hardware for encoding or reading out quantum information.
Josephson traveling-wave parametric amplifiers (JTWPAs) are promising platforms for realizing broadband quantum-limited amplification of microwave signals. However, substantial gain in such systems is attainable only when strict constraints on phase matching of the signal, idler, and pump waves are satisfied---this is rendered particularly challenging in the presence of nonlinear effects, such as self- and cross-phase modulation, which scale with the intensity of propagating signals. In this work, we present a simple JTWPA based on ``left-handed'' (negative-index) nonlinear Josephson metamaterial, which has phase matching native to its design, precluding the need for any complicated circuit or dispersion engineering. The resultant efficiency of the four-wave-mixing process can implement gains in excess of 20 dB over few-gigahertz bandwidths with much shorter lines than previous implementations. Furthermore, the intrinsic phase matching considerably simplifies the JTWPA design and operation compared to the previous implementations based on ``right-handed'' (positive-index) Josephson metamaterials, making the proposed architecture particularly appealing for integration with large superconducting architectures. The left-handed Josephson transmission line introduced here constitutes an alternative modality in distributed Josephson circuits, and forms a crucial piece of the unified framework that can be used to inform the optimal design and operation of broadband microwave amplifiers.
Detecting single-photon level signals—carriers of both classical and quantum information—is particularly challenging for low-energy microwave frequency excitations. Here we introduce a superconducting amplifier based on a Josephson junction transmission line. Unlike current standing-wave parametric amplifiers, this traveling wave architecture robustly achieves high gain over a bandwidth of several gigahertz with sufficient dynamic range to read out 20 superconducting qubits. To achieve this performance, we introduce a subwavelength resonant phase-matching technique that enables the creation of nonlinear microwave devices with unique dispersion relations. We benchmark the amplifier with weak measurements, obtaining a high quantum efficiency of 75% (70% including noise added by amplifiers following the Josephson amplifier). With a flexible design based on compact lumped elements, this Josephson amplifier has broad applicability to microwave metrology and quantum optics.
A microwave amplifier combining noise performances as close as possible to the quantum limit with large bandwidth and high saturation power is highly desirable for many solid-state quantum technologies.Here, we introduce a new traveling-wave parametric amplifier based on superconducting quantum interference devices.It displays a 3-GHz bandwidth, a -100-dBm saturation (1-dB compression) point and added noise near the quantum limit.Compared to the previous state of the art, it is an order of magnitude more compact, its characteristic impedance is in situ tunable, and its fabrication process requires only two lithography steps.The key is the engineering of a gap in the dispersion relation of the transmission line.This is obtained using a periodic modulation of the SQUID size, similarly to what is done with photonic crystals.Moreover, we provide a new theoretical treatment to describe the nontrivial interplay between nonlinearity and such periodicity.Our approach provides a path to cointegration with other quantum devices such as qubits given the low footprint and easy fabrication of our amplifier.