Challenges
Datasets
Workspaces
Papers
Discussions
Leaderboard
Log inSign up
Challenges
Datasets
Workspaces
Papers
Discussions
Leaderboard
Blog
Job Board
Q3AS

© 2026 Aqora Quantum S.A.S.

TermsPrivacyLegal Notice

arXiv:2101.04135 · Physical review. B./Physical review. B

Towards a topological quantum chemistry description of correlated systems: The case of the Hubbard diamond chain

Mikel Iraola, Niclas Heinsdorf, Apoorv Tiwari, Dominik Leßnich, Thomas Mertz, Francesco Ferrari, Mark H. Fischer, Stephen M. Winter, Frank Pollmann, Titus Neupert, Roser Valentí, Maia G. Vergniory

Published Nov 15, 2021• 24 citations
arXivHTMLPDF

Abstract

The recently introduced topological quantum chemistry (TQC) framework has provided a description of universal topological properties of all possible band insulators in all space groups based on crystalline unitary symmetries and time reversal. While this formalism filled the gap between the mathematical classification and the practical diagnosis of topological materials, an obvious limitation is that it only applies to weakly interacting systems, which can be described within band theory. It is an open question to which extent this formalism can be generalized to correlated systems that can exhibit symmetry-protected topological phases which are not adiabatically connected to any band insulator. In this work, we address the many facets of this question by considering the specific example of an extended version of a Hubbard diamond chain. This model features a Mott insulator, a trivial insulating phase, and an obstructed atomic limit phase. Here we first discuss the nature of the Mott insulator and determine the phase diagram and topology of the interacting model with infinite density matrix renormalization group calculations, variational Monte Carlo simulations, and with many-body topological invariants. We then proceed by considering a generalization of the TQC formalism to Green's functions combined with the concept of a topological Hamiltonian to identify the topological nature of the phases. Here we use cluster perturbation theory to calculate the Green's functions. The results are benchmarked with the above-determined phase diagram, and we discuss the applicability and limitations of the approach and its possible extensions in the diagnosis of topological phases in materials, in contrast to the use of many-body topological invariants.

DOI
10.1103/physrevb.104.195125

Related papers

Interacting topological quantum chemistry of Mott atomic limits

Martina O. Soldini, Nikita Astrakhantsev, Mikel Iraola +6 more

Topological quantum chemistry (TQC) is a successful framework for identifying noninteracting topological materials, based on the symmetry analysis of the Bloch Hamiltonian and on reference states known as atomic limits. However, TQC grinds to a halt once interactions are included. Here, the authors put forward a framework analogous to TQC, but employing $n$-particle Green's function techniques to indicate topology in interacting systems. Fundamentally, they define a class of interacting reference states that generalize the notion of atomic limits, which they call Mott atomic limits. The reference states are symmetry protected topological states.

arXiv:2209.10556•Physical review. B./Physical review. B•Jun 29, 2023•29 citations

Topological invariants and interacting one-dimensional fermionic systems

Salvatore R. Manmana, Andrew M. Essin, R. M. Noack +1 more

We study one-dimensional, interacting, gapped fermionic systems described by variants of the Peierls-Hubbard model, and we characterize their phases via a topological invariant constructed out of their Green's functions. We demonstrate that the existence of topologically protected, zero-energy states at the boundaries of these systems can be tied to the value of the topological invariant, just like when working with the conventional, noninteracting topological insulators. We use a combination of analytical methods and the numerical density matrix renormalization group method to calculate the values of the topological invariant throughout the phase diagrams of these systems, thus deducing when topologically protected boundary states are present. We are also able to study topological states in spin systems because, deep in the Mott insulating regime, these fermionic systems reduce to spin chains. In this way, we associate the zero-energy states at the end of an antiferromagnetic spin-1 Heisenberg chain with a topological invariant equal to 2.

arXiv:1205.5095•Physical Review B•Nov 16, 2012•138 citations

Toward Complete Characterization of Topological Insulators and Superconductors: A Systematic Construction of Topological Invariants Based on Atiyah-Hirzebruch Spectral Sequence

Seishiro Ono, Ken Shiozaki

The past decade has witnessed significant progress in topological materials investigation. Symmetry-indicator theory and topological quantum chemistry provide an efficient scheme to diagnose topological phases from only partial information of wave functions without full knowledge of topological invariants, which has resulted in a recent comprehensive materials search. However, not all topological phases can be captured by this framework, and topological invariants are needed for a more refined diagnosis of topological phases. In this study, we present a systematic framework to construct topological invariants for a large part of symmetry classes, which should be contrasted with the existing invariants discovered through one-by-one approaches. Our method is based on the recently developed Atiyah-Hirzebruch spectral sequence in momentum space. As a demonstration, we construct topological invariants for time-reversal-symmetric spinful superconductors with conventional pairing symmetries of all space groups, for which symmetry indicators are silent. We also validate that the obtained quantities work as topological invariants by computing them for randomly generated symmetric Hamiltonians. Remarkably, the constructed topological invariants completely characterize K groups in 159 space groups. Our topological invariants for normal conducting phases are defined under some gauge conditions. To facilitate efficient numerical simulations, we discuss how to derive gauge-independent topological invariants from the gauge-fixed topological invariants through some examples. Combined with first-principles calculations, our results will help us discover topological materials that could be used in next-generation devices and pave the way for a more comprehensive topological materials database.

arXiv:2311.15814•Physical Review X•Aug 4, 2026•9 citations

Characterizing Mott Insulators in the Interacting One-Body Picture

Théo N. Dionne, Santiago Villodre, Mikel Iraola +1 more

The one-body picture underlies our understanding of weakly interacting solids but breaks down in strongly correlated systems. We develop a general framework, based on the single-particle Green's function and the one-body reduced density matrix (1RDM), to characterize correlated electronic phases. Applying it to the Hubbard diamond chain, we combine density matrix renormalization group and cellular dynamical mean-field theory to construct symmetry-resolved effective orbitals and track their evolution across its Mott transitions, while the 1RDM purity provides a scalar indicator of the phase boundaries. These tools offer a general route to extend one-body concepts to correlated materials.

arXiv:2511.07331•Nov 10, 2025•2 citations

Band representations in Strongly Correlated Settings: The Kitaev Honeycomb Model

Axel Fünfhaus, Mikel García‐Díez, Maia G. Vergniory +3 more

In the study of quantum spin liquids, the Kitaev model plays a pivotal role due to the fact that its ground state is exactly known as well as the fact that it may be realized in strongly frustrated materials such as $α$-RuCl${}_3$. While topological insulators and superconductors can be investigated by means of topological band theory -- in particular the topological quantum chemistry (TQC) formalism -- the Kitaev model evades such a treatment, as it is not possible to set up a proper single-particle Green's function for it. We instead associate spin operators with ``orbitals'' that give rise to a band structure. It is thereby possible to analyze the corresponding excitation spectrum engendered by these localized excitations by means of TQC. Special attention is given to the low-energy topological edge mode spectrum. Our work sheds light on the question how the TQC formalism may be generalized to strongly correlated and topologically ordered systems like the Kitaev model.

arXiv:2501.11396•Jan 20, 2025•0 citations

A Single-Particle Diagnosis of an Interacting Topological Insulator

Théo N. Dionne, Maia G. Vergniory

Understanding how topology survives in strongly correlated systems remains a central challenge, as most topological diagnostics rely on non-interacting band structures. Here we present a framework to characterize interacting topological phases within an effective single-particle description derived from the single-particle Green's function. Using the Su-Schrieffer-Heeger model with Hatsugai-Kohmoto interactions as an analytically tractable example, we construct the one-body reduced density matrix from the Green's function and use it to define an effective winding number together with quantum volume, a measurement of state geometry. These quantities allow us to distinguish three insulating phases including correlated Mott states directly from single-particle observables. Our results show that interacting topology can be interpreted in terms of the spectral weight distribution of single-particle excitations, providing an intuitive and computationally accessible route to diagnose topological phases in correlated systems. This approach is compatible with modern many-body simulation techniques and opens a pathway toward the identification of interacting topological materials.

arXiv:2603.11879•Mar 12, 2026•0 citations
The recently introduced topological quantum chemistry (TQC) framework has provided a description of universal topological properties of all possible band insulators in all space groups based on crystalline unitary symmetries and time reversal. While this formalism filled the gap between the mathematical classification and the practical diagnosis of topological materials, an obvious limitation is that it only applies to weakly interacting systems, which can be described within band theory. It is an open question to which extent this formalism can be generalized to correlated systems that can exhibit symmetry-protected topological phases which are not adiabatically connected to any band insulator. In this work, we address the many facets of this question by considering the specific example of an extended version of a Hubbard diamond chain. This model features a Mott insulator, a trivial insulating phase, and an obstructed atomic limit phase. Here we first discuss the nature of the Mott insulator and determine the phase diagram and topology of the interacting model with infinite density matrix renormalization group calculations, variational Monte Carlo simulations, and with many-body topological invariants. We then proceed by considering a generalization of the TQC formalism to Green's functions combined with the concept of a topological Hamiltonian to identify the topological nature of the phases. Here we use cluster perturbation theory to calculate the Green's functions. The results are benchmarked with the above-determined phase diagram, and we discuss the applicability and limitations of the approach and its possible extensions in the diagnosis of topological phases in materials, in contrast to the use of many-body topological invariants.
Topological quantum chemistry (TQC) is a successful framework for identifying noninteracting topological materials, based on the symmetry analysis of the Bloch Hamiltonian and on reference states known as atomic limits. However, TQC grinds to a halt once interactions are included. Here, the authors put forward a framework analogous to TQC, but employing nnn-particle Green's function techniques to indicate topology in interacting systems. Fundamentally, they define a class of interacting reference states that generalize the notion of atomic limits, which they call Mott atomic limits. The reference states are symmetry protected topological states.
We study one-dimensional, interacting, gapped fermionic systems described by variants of the Peierls-Hubbard model, and we characterize their phases via a topological invariant constructed out of their Green's functions. We demonstrate that the existence of topologically protected, zero-energy states at the boundaries of these systems can be tied to the value of the topological invariant, just like when working with the conventional, noninteracting topological insulators. We use a combination of analytical methods and the numerical density matrix renormalization group method to calculate the values of the topological invariant throughout the phase diagrams of these systems, thus deducing when topologically protected boundary states are present. We are also able to study topological states in spin systems because, deep in the Mott insulating regime, these fermionic systems reduce to spin chains. In this way, we associate the zero-energy states at the end of an antiferromagnetic spin-1 Heisenberg chain with a topological invariant equal to 2.
The past decade has witnessed significant progress in topological materials investigation. Symmetry-indicator theory and topological quantum chemistry provide an efficient scheme to diagnose topological phases from only partial information of wave functions without full knowledge of topological invariants, which has resulted in a recent comprehensive materials search. However, not all topological phases can be captured by this framework, and topological invariants are needed for a more refined diagnosis of topological phases. In this study, we present a systematic framework to construct topological invariants for a large part of symmetry classes, which should be contrasted with the existing invariants discovered through one-by-one approaches. Our method is based on the recently developed Atiyah-Hirzebruch spectral sequence in momentum space. As a demonstration, we construct topological invariants for time-reversal-symmetric spinful superconductors with conventional pairing symmetries of all space groups, for which symmetry indicators are silent. We also validate that the obtained quantities work as topological invariants by computing them for randomly generated symmetric Hamiltonians. Remarkably, the constructed topological invariants completely characterize K groups in 159 space groups. Our topological invariants for normal conducting phases are defined under some gauge conditions. To facilitate efficient numerical simulations, we discuss how to derive gauge-independent topological invariants from the gauge-fixed topological invariants through some examples. Combined with first-principles calculations, our results will help us discover topological materials that could be used in next-generation devices and pave the way for a more comprehensive topological materials database.
The one-body picture underlies our understanding of weakly interacting solids but breaks down in strongly correlated systems. We develop a general framework, based on the single-particle Green's function and the one-body reduced density matrix (1RDM), to characterize correlated electronic phases. Applying it to the Hubbard diamond chain, we combine density matrix renormalization group and cellular dynamical mean-field theory to construct symmetry-resolved effective orbitals and track their evolution across its Mott transitions, while the 1RDM purity provides a scalar indicator of the phase boundaries. These tools offer a general route to extend one-body concepts to correlated materials.
In the study of quantum spin liquids, the Kitaev model plays a pivotal role due to the fact that its ground state is exactly known as well as the fact that it may be realized in strongly frustrated materials such as ααα-RuCl3{}_33​. While topological insulators and superconductors can be investigated by means of topological band theory -- in particular the topological quantum chemistry (TQC) formalism -- the Kitaev model evades such a treatment, as it is not possible to set up a proper single-particle Green's function for it. We instead associate spin operators with ``orbitals'' that give rise to a band structure. It is thereby possible to analyze the corresponding excitation spectrum engendered by these localized excitations by means of TQC. Special attention is given to the low-energy topological edge mode spectrum. Our work sheds light on the question how the TQC formalism may be generalized to strongly correlated and topologically ordered systems like the Kitaev model.
Understanding how topology survives in strongly correlated systems remains a central challenge, as most topological diagnostics rely on non-interacting band structures. Here we present a framework to characterize interacting topological phases within an effective single-particle description derived from the single-particle Green's function. Using the Su-Schrieffer-Heeger model with Hatsugai-Kohmoto interactions as an analytically tractable example, we construct the one-body reduced density matrix from the Green's function and use it to define an effective winding number together with quantum volume, a measurement of state geometry. These quantities allow us to distinguish three insulating phases including correlated Mott states directly from single-particle observables. Our results show that interacting topology can be interpreted in terms of the spectral weight distribution of single-particle excitations, providing an intuitive and computationally accessible route to diagnose topological phases in correlated systems. This approach is compatible with modern many-body simulation techniques and opens a pathway toward the identification of interacting topological materials.