Challenges
Datasets
Workspaces
Papers
Discussions
Leaderboard
Log inSign up
Challenges
Datasets
Workspaces
Papers
Discussions
Leaderboard
Blog
Job Board
Q3AS

© 2026 Aqora Quantum S.A.S.

TermsPrivacyLegal Notice

arXiv:2012.11104 · Physical Review A

Optimal single-shot discrimination of optical modes

Ignatius William Primaatmaja, Asaph Ho, Valerio Scarani

Published May 10, 2021• 3 citations
arXivHTMLPDF

Abstract

Retrieving classical information encoded in optical modes is at the heart of many quantum information processing tasks, especially in the field of quantum communication and sensing. Yet, despite its importance, the fundamental limits of optical mode discrimination have been studied only in a few specific examples. Here we present a toolbox to find the optimal discrimination of any set of optical modes. The toolbox uses linear and semidefinite programming techniques, which provide rigorous (not heuristic) bounds, and which can be efficiently solved on standard computers. We study both probabilistic and unambiguous single-shot discrimination in two scenarios: the channel-discrimination scenario, typical of metrology, in which the verifier holds the light source and can set up a reference frame for the phase; and the source-discrimination scenario, more frequent in cryptography, in which the verifier only sees states that are diagonal in the photon-number basis. Our techniques are illustrated with several examples. Among the results, we find that, for many sets of modes, the optimal state for mode discrimination is a superposition or mixture of at most two number states; but this is not general, and we also exhibit counterexamples.

DOI
10.1103/physreva.103.052410

Related papers

Experimental Minimum-Error Quantum-State Discrimination in High Dimensions

M. A. Solís-Prosser, Mário Foganholi Fernandes, O. Jiménez +2 more

Quantum mechanics forbids perfect discrimination among nonorthogonal states through a single shot measurement. To optimize this task, many strategies were devised that later became fundamental tools for quantum information processing. Here, we address the pioneering minimum-error (ME) measurement and give the first experimental demonstration of its application for discriminating nonorthogonal states in high dimensions. Our scheme is designed to distinguish symmetric pure states encoded in the transverse spatial modes of an optical field; the optimal measurement is performed by a projection onto the Fourier transform basis of these modes. For dimensions ranging from D=2 to D=21 and nearly 14 000 states tested, the deviations of the experimental results from the theoretical values range from 0.3% to 3.6% (getting below 2% for the vast majority), thus showing the excellent performance of our scheme. This ME measurement is a building block for high-dimensional implementations of many quantum communication protocols, including probabilistic state discrimination, dense coding with nonmaximal entanglement, and cryptographic schemes.

arXiv:1703.02961•Physical Review Letters•Mar 6, 2017•64 citations

Achieving minimum-error discrimination of an arbitrary set of laser-light pulses

Marcus Palmer Da Silva, Saikat Guha, Zachary Dutton

Laser light is widely used for communication and sensing applications, so the optimal discrimination of coherent states---the quantum states of light emitted by an ideal laser---has immense practical importance. Due to fundamental limits imposed by quantum mechanics, such discrimination has a finite minimum probability of error. While concrete optical circuits for the optimal discrimination between two coherent states are well known, the generalization to larger sets of coherent states has been challenging. In this paper, we show how to achieve optimal discrimination of any set of coherent states using a resource-efficient quantum computer. Our construction leverages a recent result on discriminating multicopy quantum hypotheses [Blume-Kohout, Croke, and Zwolak, arXiv:1201.6625]. As illustrative examples, we analyze the performance of discriminating a ternary alphabet and show how the quantum circuit of a receiver designed to discriminate a binary alphabet can be reused in discriminating multimode hypotheses. Finally, we show that our result can be used to achieve the quantum limit on the rate of classical information transmission on a lossy optical channel, which is known to exceed the Shannon rate of all conventional optical receivers.

arXiv:1208.5758•Physical Review A•May 23, 2013•34 citations

Trading energy for coherence in mode discrimination

Shuyang Meng, Valerio Scarani

Energy is arguably the main resource in classical physics; coherence is the prototypical quantum resource. In this paper, we study the interplay between these two resources in the task of optimal mode discrimination. This task, motivated by cryptography and metrology, consists of finding in which mode a signal has been encoded, for a given finite set of possible modes. After recalling that the task can be cast as a semi-definite program, we solve completely the case of two-mode discrimination under a hard energy constraint $n\leq N$. Specifically, we identify the region of modes overlap, for which the maximal energy state (the Fock state with N excitations) is the best choice for discrimination. For other overlaps, having access to coherence leads to better discrimination.

quant-pharXiv:2610.19897•Oct 15, 2026•0 citations

Optimal unambiguous discrimination of Bell-like states with linear optics

Dov Fields, János A. Bergou, Mark S. Hillery +2 more

Quantum information processing using linear optics is challenging due to the limited set of deterministic operations achievable without using complicated resource-intensive methods. While techniques such as the use of ancillary photons can enhance the information processing capabilities of linear optical systems, they are technologically demanding. Therefore, determining the constraints posed by linear optics and optimizing linear optical operations for specific tasks under those constraints, without the use of ancillae, can facilitate their potential implementation. Here, we consider the task of unambiguously discriminating between Bell-like states using linear optics and without the use of ancillary photons. This is a basic problem relevant in diverse settings, for example, in the measurement of the output of an entangling quantum circuit or for entanglement swapping at a quantum repeater station. While it is known that exact Bell states of two qubits can be discriminated with an optimal success probability of 50%, we find, surprisingly, that for Bell-like states the optimal probability can be only 25%. We analyze a set of Bell-like states in terms of their distinguishability, entanglement as measured by concurrence, and parameters of the beam-splitter network used for unambiguous discrimination. Further, we provide the linear optical configuration comprising single-photon detectors and beam splitters with input-state-dependent parameters that achieves optimal discrimination in the Bell-like case.

arXiv:2112.01605•Physical Review A•Aug 8, 2022•4 citations

Quantum theory of unambiguous measurements

Michal Sedlák

Quantum theory of unambiguous measurements In the present paper I formulate a framework that accommodates many unambiguous discrimination problems. I show that the prior information about any type of constituent (state, channel, or observable) allows us to reformulate the discrimination among finite number of alternatives as the discrimination among finite number of average constituents. Using this framework I solve several unambiguous tasks. I present a solution to optimal unambiguous comparison of two ensembles of unknown quantum states. I consider two cases: 1) The two unknown states are arbitrary pure states of qudits. 2) Alternatively, they are coherent states of single-mode optical fields. For this case I propose simple and optimal experimental setup composed of beam-splitters and a photodetector. As a second tasks I consider an unambiguous identification (UI) of coherent states. In this task identical quantum systems are prepared in coherent states and labeled as unknown and reference states, respectively. The promise is that one reference state is the same as the unknown state and the task is to find out unambiguously which one it is. The particular choice of the reference states is unknown to us, and only the probability distribution describing this choice is known. In a general case when multiple copies of unknown and reference states are available I propose a scheme consisting of beamsplitters and photodetectors that is optimal within linear optics. UI can be considered as a search in a quantum database, whose elements are the reference states and the query is represented by the unknown state. This perspective motivated me to show that reference states can be recovered after the measurement and might be used (with reduced success rate) in subsequent UI. Moreover, I analyze the influence of noise in preparation of coherent states on the performance of the proposed setup. Another problem I address is the unambiguous comparison of a pair of unknown qudit unitary channels. I characterize all solutions and identify the optimal ones. I prove that in optimal experiments for comparison of unitary channels the entanglement is necessary. The last task I studied is the unambiguous comparison of unknown non-degenerate projective measurements. I distinguish between measurement devices with apriori labeled and unlabeled outcomes. In both cases only the difference of the measurements can be concluded unambiguously. For the labeled case I derive the optimal strategy if each unknown measurement is used only once. However, if the apparatuses are not labeled, then each measurement device must be used (at least) twice. In particular, for qubit measurement apparatuses with unlabeled outcomes I derive the optimal test state in the two-shots scenario.

arXiv:1003.2448•Acta Physica Slovaca Reviews and Tutorials•Dec 1, 2009•18 citations

Single-Shot Non-Gaussian Measurements for Optical Phase Estimation

M. T. DiMario, F. E. Becerra

Estimation of the properties of a physical system with minimal uncertainty is a central task in quantum metrology. Optical phase estimation is at the center of many metrological tasks where the value of a physical parameter is mapped to the phase of an electromagnetic field and single-shot measurements of this phase are necessary. While there are measurements able to estimate the phase of light in a single shot with small uncertainties, demonstrations of near-optimal single-shot measurements for an unknown phase of a coherent state remain elusive. Here, we propose and demonstrate strategies for single-shot measurements for ab initio phase estimation of coherent states that surpass the sensitivity limit of heterodyne measurement and approach the Cramer-Rao lower bound for coherent states. These single-shot estimation strategies are based on real-time optimization of coherent displacement operations, single photon counting with photon number resolution, and fast feedback. We show that our demonstration of these optimized estimation strategies surpasses the heterodyne limit for a wide range of optical powers without correcting for detection efficiency with a moderate number of adaptive measurement steps. This is, to our knowledge, the most sensitive single-shot measurement of an unknown phase encoded in optical coherent states.

arXiv:2008.08185•Physical Review Letters•Sep 18, 2020•12 citations
Retrieving classical information encoded in optical modes is at the heart of many quantum information processing tasks, especially in the field of quantum communication and sensing. Yet, despite its importance, the fundamental limits of optical mode discrimination have been studied only in a few specific examples. Here we present a toolbox to find the optimal discrimination of any set of optical modes. The toolbox uses linear and semidefinite programming techniques, which provide rigorous (not heuristic) bounds, and which can be efficiently solved on standard computers. We study both probabilistic and unambiguous single-shot discrimination in two scenarios: the channel-discrimination scenario, typical of metrology, in which the verifier holds the light source and can set up a reference frame for the phase; and the source-discrimination scenario, more frequent in cryptography, in which the verifier only sees states that are diagonal in the photon-number basis. Our techniques are illustrated with several examples. Among the results, we find that, for many sets of modes, the optimal state for mode discrimination is a superposition or mixture of at most two number states; but this is not general, and we also exhibit counterexamples.
Quantum mechanics forbids perfect discrimination among nonorthogonal states through a single shot measurement. To optimize this task, many strategies were devised that later became fundamental tools for quantum information processing. Here, we address the pioneering minimum-error (ME) measurement and give the first experimental demonstration of its application for discriminating nonorthogonal states in high dimensions. Our scheme is designed to distinguish symmetric pure states encoded in the transverse spatial modes of an optical field; the optimal measurement is performed by a projection onto the Fourier transform basis of these modes. For dimensions ranging from D=2 to D=21 and nearly 14 000 states tested, the deviations of the experimental results from the theoretical values range from 0.3% to 3.6% (getting below 2% for the vast majority), thus showing the excellent performance of our scheme. This ME measurement is a building block for high-dimensional implementations of many quantum communication protocols, including probabilistic state discrimination, dense coding with nonmaximal entanglement, and cryptographic schemes.
Laser light is widely used for communication and sensing applications, so the optimal discrimination of coherent states---the quantum states of light emitted by an ideal laser---has immense practical importance. Due to fundamental limits imposed by quantum mechanics, such discrimination has a finite minimum probability of error. While concrete optical circuits for the optimal discrimination between two coherent states are well known, the generalization to larger sets of coherent states has been challenging. In this paper, we show how to achieve optimal discrimination of any set of coherent states using a resource-efficient quantum computer. Our construction leverages a recent result on discriminating multicopy quantum hypotheses [Blume-Kohout, Croke, and Zwolak, arXiv:1201.6625]. As illustrative examples, we analyze the performance of discriminating a ternary alphabet and show how the quantum circuit of a receiver designed to discriminate a binary alphabet can be reused in discriminating multimode hypotheses. Finally, we show that our result can be used to achieve the quantum limit on the rate of classical information transmission on a lossy optical channel, which is known to exceed the Shannon rate of all conventional optical receivers.
Energy is arguably the main resource in classical physics; coherence is the prototypical quantum resource. In this paper, we study the interplay between these two resources in the task of optimal mode discrimination. This task, motivated by cryptography and metrology, consists of finding in which mode a signal has been encoded, for a given finite set of possible modes. After recalling that the task can be cast as a semi-definite program, we solve completely the case of two-mode discrimination under a hard energy constraint n≤Nn\leq Nn≤N. Specifically, we identify the region of modes overlap, for which the maximal energy state (the Fock state with N excitations) is the best choice for discrimination. For other overlaps, having access to coherence leads to better discrimination.
Quantum information processing using linear optics is challenging due to the limited set of deterministic operations achievable without using complicated resource-intensive methods. While techniques such as the use of ancillary photons can enhance the information processing capabilities of linear optical systems, they are technologically demanding. Therefore, determining the constraints posed by linear optics and optimizing linear optical operations for specific tasks under those constraints, without the use of ancillae, can facilitate their potential implementation. Here, we consider the task of unambiguously discriminating between Bell-like states using linear optics and without the use of ancillary photons. This is a basic problem relevant in diverse settings, for example, in the measurement of the output of an entangling quantum circuit or for entanglement swapping at a quantum repeater station. While it is known that exact Bell states of two qubits can be discriminated with an optimal success probability of 50%, we find, surprisingly, that for Bell-like states the optimal probability can be only 25%. We analyze a set of Bell-like states in terms of their distinguishability, entanglement as measured by concurrence, and parameters of the beam-splitter network used for unambiguous discrimination. Further, we provide the linear optical configuration comprising single-photon detectors and beam splitters with input-state-dependent parameters that achieves optimal discrimination in the Bell-like case.
Quantum theory of unambiguous measurements In the present paper I formulate a framework that accommodates many unambiguous discrimination problems. I show that the prior information about any type of constituent (state, channel, or observable) allows us to reformulate the discrimination among finite number of alternatives as the discrimination among finite number of average constituents. Using this framework I solve several unambiguous tasks. I present a solution to optimal unambiguous comparison of two ensembles of unknown quantum states. I consider two cases: 1) The two unknown states are arbitrary pure states of qudits. 2) Alternatively, they are coherent states of single-mode optical fields. For this case I propose simple and optimal experimental setup composed of beam-splitters and a photodetector. As a second tasks I consider an unambiguous identification (UI) of coherent states. In this task identical quantum systems are prepared in coherent states and labeled as unknown and reference states, respectively. The promise is that one reference state is the same as the unknown state and the task is to find out unambiguously which one it is. The particular choice of the reference states is unknown to us, and only the probability distribution describing this choice is known. In a general case when multiple copies of unknown and reference states are available I propose a scheme consisting of beamsplitters and photodetectors that is optimal within linear optics. UI can be considered as a search in a quantum database, whose elements are the reference states and the query is represented by the unknown state. This perspective motivated me to show that reference states can be recovered after the measurement and might be used (with reduced success rate) in subsequent UI. Moreover, I analyze the influence of noise in preparation of coherent states on the performance of the proposed setup. Another problem I address is the unambiguous comparison of a pair of unknown qudit unitary channels. I characterize all solutions and identify the optimal ones. I prove that in optimal experiments for comparison of unitary channels the entanglement is necessary. The last task I studied is the unambiguous comparison of unknown non-degenerate projective measurements. I distinguish between measurement devices with apriori labeled and unlabeled outcomes. In both cases only the difference of the measurements can be concluded unambiguously. For the labeled case I derive the optimal strategy if each unknown measurement is used only once. However, if the apparatuses are not labeled, then each measurement device must be used (at least) twice. In particular, for qubit measurement apparatuses with unlabeled outcomes I derive the optimal test state in the two-shots scenario.
Estimation of the properties of a physical system with minimal uncertainty is a central task in quantum metrology. Optical phase estimation is at the center of many metrological tasks where the value of a physical parameter is mapped to the phase of an electromagnetic field and single-shot measurements of this phase are necessary. While there are measurements able to estimate the phase of light in a single shot with small uncertainties, demonstrations of near-optimal single-shot measurements for an unknown phase of a coherent state remain elusive. Here, we propose and demonstrate strategies for single-shot measurements for ab initio phase estimation of coherent states that surpass the sensitivity limit of heterodyne measurement and approach the Cramer-Rao lower bound for coherent states. These single-shot estimation strategies are based on real-time optimization of coherent displacement operations, single photon counting with photon number resolution, and fast feedback. We show that our demonstration of these optimized estimation strategies surpasses the heterodyne limit for a wide range of optical powers without correcting for detection efficiency with a moderate number of adaptive measurement steps. This is, to our knowledge, the most sensitive single-shot measurement of an unknown phase encoded in optical coherent states.