Challenges
Datasets
Workspaces
Papers
Discussions
Leaderboard
Log inSign up
Challenges
Datasets
Workspaces
Papers
Discussions
Leaderboard
Blog
Job Board
Q3AS

© 2026 Aqora Quantum S.A.S.

TermsPrivacyLegal Notice

arXiv:2011.08987 · Physical Review X

Characterization and Tomography of a Hidden Qubit

Marek Pechal, Gian Salis, Marc Ganzhorn, Daniel J. Egger, M. Werninghaus, Stefan Filipp

Published Nov 15, 2021• 10 citations
arXivHTMLPDF

Abstract

In circuit-based quantum computing the available gate set typically consists of single-qubit gates acting on each individual qubit and at least one entangling gate between pairs of qubits.In certain physical architectures, however, some qubits may be "hidden" and lacking direct addressability through dedicated control and readout lines, for instance, because of limited on-chip routing capabilities, or because the number of control lines becomes a limiting factor for many-qubit systems.In this case, no single-qubit operations can be applied to the hidden qubits and their state cannot be measured directly.Instead, they may be controlled and read out only via single-qubit operations on connected "control" qubits and a suitable set of two-qubit gates.We first discuss the impact of such restricted control capabilities on the performance of specific qubit coupling networks.We then experimentally demonstrate full control and measurement capabilities in a superconducting two-qubit device with local single-qubit control and iSWAP and controlledphase two-qubit interactions enabled by a tunable coupler.We further introduce an iterative tune-up process required to completely characterize the gate set used for quantum process tomography and evaluate the resulting gate fidelities.

DOI
10.1103/physrevx.11.041032

Related papers

Characterization of a Two-Transmon Processor with Individual Single-Shot Qubit Readout

Andreas Dewes, Florian R. Ong, Vivien Schmitt +5 more

We report the characterization of a two-qubit processor implemented with two capacitively coupled tunable superconducting qubits of the transmon type, each qubit having its own nondestructive single-shot readout. The fixed capacitive coupling yields the sqrt[iSWAP] two-qubit gate for a suitable interaction time. We reconstruct by state tomography the coherent dynamics of the two-bit register as a function of the interaction time, observe a violation of the Bell inequality by 22 standard deviations after correcting readout errors, and measure by quantum process tomography a gate fidelity of 90%.

arXiv:1109.6735•Physical Review Letters•Feb 2, 2012•125 citations

Quantum Process Tomography of a Controlled-NOT Gate

Jeremy L. O’Brien, Geoff J. Pryde, Alexei Gilchrist +4 more

We demonstrate complete characterization of a two-qubit entangling process--a linear optics controlled-NOT gate operating with coincident detection--by quantum process tomography. We use a maximum-likelihood estimation to convert the experimental data into a physical process matrix. The process matrix allows an accurate prediction of the operation of the gate for arbitrary input states and a calculation of gate performance measures such as the average gate fidelity, average purity, and entangling capability of our gate, which are 0.90, 0.83, and 0.73, respectively.

arXiv:quant-ph/0402166•Physical Review Letters•Aug 20, 2004•511 citations

Characterization of tunable coupler without a dedicated readout resonator in superconducting circuits

Chi Zhang, Tian-Le Wang, Liang-Liang Guo +6 more

Tunable couplers have recently emerged as an essential component in superconducting quantum processors. These couplers usually do not have readout resonators to save control or hardware overhead; this makes it challenging to characterize and calibrate the coupler, which will undoubtedly limit the performance of a fast two-qubit gate. Here, we theoretically demonstrate that by mapping the coupler's state onto that of its neighboring qubit, the high-contrast readout of the coupler can be realized. We experimentally implement such a readout scheme with a single-shot readout fidelity of 86%, which is mainly limited by the thermal population of our sample. We further demonstrate how to calibrate the flux crosstalk related to the coupler and its flux distortion that are ignored in the previous works. These calibration steps are imperative for realizing robust and accurate quantum operations in frequency-tunable superconducting circuits.

Applied Physics Letters•Jan 9, 2023•12 citations

Characterization and optimization of tunable couplers via adiabatic control in superconducting circuits

Xuan Zhang, Xu Zhang, C. H. Chen +6 more

In the pursuit of scalable superconducting quantum computing, tunable couplers have emerged as a pivotal component, offering the flexibility required for complex quantum operations of high performance. In most current architectures of superconducting quantum chips, such couplers are not equipped with dedicated readout circuits to reduce complexity in both design and operation. However, this strategy poses challenges in precise characterization, calibration, and control of the couplers. In this work, we develop a hardware-efficient and robust technique based on adiabatic control to address this issue. The critical ingredient of this technique is adiabatic swap operation between a tunable coupler and nearby qubits. Using this technique, we have characterized and calibrated tunable couplers in our chips and achieved straightforward and precise control over these couplers. For example, we have demonstrated the calibration and correction of the flux distortion of couplers. In addition, we have also expanded this technique to tune the dispersive shift between a frequency-fixed qubit and its readout resonator over a wide range.

arXiv:2501.13646•Physical Review Applied•Aug 6, 2025•7 citations

Experimental demonstration of a high-fidelity virtual two-qubit gate

Akhil Pratap Singh, Kosuke Mitarai, Yasunari Suzuki +4 more

We experimentally demonstrate a virtual two-qubit gate and characterize it using quantum process tomography (QPT). The virtual two-qubit gate decomposes an actual two-qubit gate into single-qubit unitary gates and projection gates in quantum circuits for expectation-value estimation. We implement projection gates via midcircuit measurements. The deterministic sampling scheme reduces the number of experimental circuit evaluations required for decomposing a virtual two-qubit gate. We also apply quantum error mitigation to suppress the effect of measurement errors and improve the average gate fidelity of a virtual controlled- Z (CZ) gate to fav=0.9938±0.0002 . Our results highlight a practical approach to implement virtual two-qubit gates with high fidelities, which are useful for simulating quantum circuits using fewer qubits and implementing two-qubit gates on a distant pair of qubits. Published by the American Physical Society 2024

arXiv:2307.03232•Physical Review Research•Mar 4, 2024•18 citations

Parametric Multielement Coupling Architecture for Coherent and Dissipative Control of Superconducting Qubits

Gerhard B. P. Huber, Federico A. Roy, L. Koch +20 more

As systems for quantum computing keep growing in size and number of qubits, challenges in scaling the control capabilities are becoming increasingly relevant. Efficient schemes to simultaneously mediate coherent interactions between multiple quantum systems and to reduce decoherence errors can minimize the control overhead in next-generation quantum processors. Here, we present a superconducting qubit architecture based on tunable parametric interactions to perform two-qubit gates, reset, leakage recovery, and to read out the qubits. In this architecture, parametrically driven multielement couplers selectively couple qubits to resonators and neighboring qubits, according to the frequency of the drive. We consider a system with two qubits and one readout resonator interacting via a single coupling circuit and experimentally demonstrate a controlled- Z gate with a fidelity of 98.30 ± 0.23 % , a reset operation that unconditionally prepares the qubit ground state with a fidelity of 99.80 ± 0.02 % and a leakage recovery operation with a 98.5 ± 0.3 % success probability. Furthermore, we implement a parametric readout with a single-shot assignment fidelity of 88.0 ± 0.4 % . These operations are all realized using a single tunable coupler and a statically decoupled resonator, demonstrating the experimental feasibility of the proposed architecture and its potential for reducing the system complexity in scalable quantum processors.

arXiv:2403.02203•PRX Quantum•Jun 11, 2025•20 citations
In circuit-based quantum computing the available gate set typically consists of single-qubit gates acting on each individual qubit and at least one entangling gate between pairs of qubits.In certain physical architectures, however, some qubits may be "hidden" and lacking direct addressability through dedicated control and readout lines, for instance, because of limited on-chip routing capabilities, or because the number of control lines becomes a limiting factor for many-qubit systems.In this case, no single-qubit operations can be applied to the hidden qubits and their state cannot be measured directly.Instead, they may be controlled and read out only via single-qubit operations on connected "control" qubits and a suitable set of two-qubit gates.We first discuss the impact of such restricted control capabilities on the performance of specific qubit coupling networks.We then experimentally demonstrate full control and measurement capabilities in a superconducting two-qubit device with local single-qubit control and iSWAP and controlledphase two-qubit interactions enabled by a tunable coupler.We further introduce an iterative tune-up process required to completely characterize the gate set used for quantum process tomography and evaluate the resulting gate fidelities.
We report the characterization of a two-qubit processor implemented with two capacitively coupled tunable superconducting qubits of the transmon type, each qubit having its own nondestructive single-shot readout. The fixed capacitive coupling yields the sqrt[iSWAP] two-qubit gate for a suitable interaction time. We reconstruct by state tomography the coherent dynamics of the two-bit register as a function of the interaction time, observe a violation of the Bell inequality by 22 standard deviations after correcting readout errors, and measure by quantum process tomography a gate fidelity of 90%.
We demonstrate complete characterization of a two-qubit entangling process--a linear optics controlled-NOT gate operating with coincident detection--by quantum process tomography. We use a maximum-likelihood estimation to convert the experimental data into a physical process matrix. The process matrix allows an accurate prediction of the operation of the gate for arbitrary input states and a calculation of gate performance measures such as the average gate fidelity, average purity, and entangling capability of our gate, which are 0.90, 0.83, and 0.73, respectively.
Tunable couplers have recently emerged as an essential component in superconducting quantum processors. These couplers usually do not have readout resonators to save control or hardware overhead; this makes it challenging to characterize and calibrate the coupler, which will undoubtedly limit the performance of a fast two-qubit gate. Here, we theoretically demonstrate that by mapping the coupler's state onto that of its neighboring qubit, the high-contrast readout of the coupler can be realized. We experimentally implement such a readout scheme with a single-shot readout fidelity of 86%, which is mainly limited by the thermal population of our sample. We further demonstrate how to calibrate the flux crosstalk related to the coupler and its flux distortion that are ignored in the previous works. These calibration steps are imperative for realizing robust and accurate quantum operations in frequency-tunable superconducting circuits.
In the pursuit of scalable superconducting quantum computing, tunable couplers have emerged as a pivotal component, offering the flexibility required for complex quantum operations of high performance. In most current architectures of superconducting quantum chips, such couplers are not equipped with dedicated readout circuits to reduce complexity in both design and operation. However, this strategy poses challenges in precise characterization, calibration, and control of the couplers. In this work, we develop a hardware-efficient and robust technique based on adiabatic control to address this issue. The critical ingredient of this technique is adiabatic swap operation between a tunable coupler and nearby qubits. Using this technique, we have characterized and calibrated tunable couplers in our chips and achieved straightforward and precise control over these couplers. For example, we have demonstrated the calibration and correction of the flux distortion of couplers. In addition, we have also expanded this technique to tune the dispersive shift between a frequency-fixed qubit and its readout resonator over a wide range.
We experimentally demonstrate a virtual two-qubit gate and characterize it using quantum process tomography (QPT). The virtual two-qubit gate decomposes an actual two-qubit gate into single-qubit unitary gates and projection gates in quantum circuits for expectation-value estimation. We implement projection gates via midcircuit measurements. The deterministic sampling scheme reduces the number of experimental circuit evaluations required for decomposing a virtual two-qubit gate. We also apply quantum error mitigation to suppress the effect of measurement errors and improve the average gate fidelity of a virtual controlled- Z (CZ) gate to fav=0.9938±0.0002 . Our results highlight a practical approach to implement virtual two-qubit gates with high fidelities, which are useful for simulating quantum circuits using fewer qubits and implementing two-qubit gates on a distant pair of qubits. Published by the American Physical Society 2024
As systems for quantum computing keep growing in size and number of qubits, challenges in scaling the control capabilities are becoming increasingly relevant. Efficient schemes to simultaneously mediate coherent interactions between multiple quantum systems and to reduce decoherence errors can minimize the control overhead in next-generation quantum processors. Here, we present a superconducting qubit architecture based on tunable parametric interactions to perform two-qubit gates, reset, leakage recovery, and to read out the qubits. In this architecture, parametrically driven multielement couplers selectively couple qubits to resonators and neighboring qubits, according to the frequency of the drive. We consider a system with two qubits and one readout resonator interacting via a single coupling circuit and experimentally demonstrate a controlled- Z gate with a fidelity of 98.30 ± 0.23 % , a reset operation that unconditionally prepares the qubit ground state with a fidelity of 99.80 ± 0.02 % and a leakage recovery operation with a 98.5 ± 0.3 % success probability. Furthermore, we implement a parametric readout with a single-shot assignment fidelity of 88.0 ± 0.4 % . These operations are all realized using a single tunable coupler and a statically decoupled resonator, demonstrating the experimental feasibility of the proposed architecture and its potential for reducing the system complexity in scalable quantum processors.