Challenges
Datasets
Workspaces
Papers
Discussions
Leaderboard
Log inSign up
Challenges
Datasets
Workspaces
Papers
Discussions
Leaderboard
Blog
Job Board
Q3AS

© 2026 Aqora Quantum S.A.S.

TermsPrivacyLegal Notice

arXiv:2011.06233 · Physical Review Applied

Comparative Study of Sampling-Based Simulation Costs of Noisy Quantum Circuits

Shigeo Hakkaku, Keisuke Fujii

Published Jun 10, 2021• 5 citations
arXivHTMLPDF

Abstract

Noise in quantum operations often negates the advantage of quantum computation. However, most classical simulations of quantum computers calculate the ideal probability amplitudes by either storing full state vectors or using sophisticated tensor-network contractions. Here we investigate sampling-based classical simulation methods for noisy quantum circuits. Specifically, we characterize the simulation costs of two major schemes, stabilizer-state sampling of magic states and Heisenberg propagation, for quantum circuits subject to stochastic Pauli noise, such as depolarizing and dephasing noise. To this end, we introduce several techniques for the stabilizer-state sampling to reduce the simulation costs under such noise. It is revealed that in the low-noise regime, stabilizer-state sampling results in a smaller sampling cost, while Heisenberg propagation is better in the high-noise regime. Furthermore, for a high depolarizing noise rate of approximately 10%, these methods provide better scaling than that given by the low-rank stabilizer decomposition. We believe that this knowledge of classical simulation costs is useful to achieve possible quantum advantage on near-term noisy quantum devices as well as efficient classical simulation methods.

DOI
10.1103/physrevapplied.15.064027

Related papers

Enhancing classical simulation with noisy quantum devices

Ruiqi Zhang, Fuchuan Wei, Zhaohui Wei

As quantum devices continue to improve in scale and precision, a central challenge is how to effectively utilize noisy hardware for meaningful computation. Most existing approaches aim to recover noiseless circuit outputs from noisy ones through error mitigation or correction. Here, we show that noisy quantum devices can be directly leveraged as computational resources to enhance the classical simulation of quantum circuits. We introduce the Noisy-device-enhanced Classical Simulation (NDE-CS) protocol, which improves stabilizer-based classical Monte Carlo simulation methods by incorporating data obtained from noisy quantum hardware. Specifically, NDE-CS uses noisy executions of a target circuit together with noisy Clifford circuits to learn how the target circuit can be expressed in terms of Clifford circuits under realistic noise. The same learned relation can then be reused in the noiseless Clifford limit, enabling accurate estimation of ideal expectation values with substantially reduced sampling cost. Numerical simulations on Trotterized Ising circuits demonstrate that NDE-CS achieves orders-of-magnitude reductions in sampling cost compared to the underlying purely classical Monte Carlo approaches from which it is derived, while maintaining the same accuracy. We also compare NDE-CS with Sparse Pauli Dynamics (SPD), a powerful classical framework capable of simulating quantum circuits at previously inaccessible scales, and provide an example where the cost of SPD scales exponentially with system size, while NDE-CS scales much more favorably. These results establish NDE-CS as a scalable hybrid simulation approach for quantum circuits, where noise can be harnessed as a computational asset.

quant-pharXiv:2601.08772•npj Quantum Information•Jan 14, 2026•2 citations

Pilot-Wave Simulator: Exact Classical Sampling from Ideal and Noisy Quantum Circuits up to Hundreds of Qubits

Gleb Vyacheslavovich Kalachev, P. A. Mosharev, Zuoheng Zou +2 more

Quantum circuit simulators running on classical computers offer a vital platform for designing, testing, and optimizing quantum algorithms, driving innovation despite limited access to real quantum hardware. However, their scalability is inherently constrained by exponential memory and computational overhead, which restricts accurate simulation of large-scale quantum circuits and often results in approximate output distributions. Here, we propose an exact sampling algorithm that integrates tensor network contraction techniques with a Markov process, wherein a classical state evolves according to the local structure of the quantum circuit. As a demonstration, we target the challenge of generating samples from ideal and noisy QAOA circuits with up to 476 qubits, incorporating both depolarizing and amplitude damping noise models. These results enable further validation of several assumptions and conjectures at a scale previously out of reach, significantly expanding the scope of classical simulation in quantum algorithm research.

arXiv:2510.24218•Quantum•Jul 23, 2026•0 citations

Logical abstractions for noisy variational Quantum algorithm simulation

Yipeng Huang, Steven Holtzen, Todd D. Millstein +2 more

Due to the unreliability and limited capacity of existing quantum computer prototypes, quantum circuit simulation continues to be a vital tool for validating next generation quantum computers and for studying variational quantum algorithms, which are among the leading candidates for useful quantum computation. Existing quantum circuit simulators do not address the common traits of variational algorithms, namely: 1) their ability to work with noisy qubits and operations, 2) their repeated execution of the same circuits but with different parameters, and 3) the fact that they sample from circuit final wavefunctions to drive a classical optimization routine. We present a quantum circuit simulation toolchain based on logical abstractions targeted for simulating variational algorithms. Our proposed toolchain encodes quantum amplitudes and noise probabilities in a probabilistic graphical model, and it compiles the circuits to logical formulas that support efficient repeated simulation of and sampling from quantum circuits for different parameters. Compared to state-of-the-art state vector and density matrix quantum circuit simulators, our simulation approach offers greater performance when sampling from noisy circuits with at least eight to 20 qubits and with around 12 operations on each qubit, making the approach ideal for simulating near-term variational quantum algorithms. And for simulating noise-free shallow quantum circuits with 32 qubits, our simulation approach offers a 66× reduction in sampling cost versus quantum circuit simulation techniques based on tensor network contraction.

arXiv:2103.17226•International Conference on Architectural Support for Programming Languages and Operating Systems (ASPLOS)•Apr 11, 2021•19 citations

Analytical and Compressed Simulation of Noisy Stabilizer Circuits

Paul Aigner, Jasmin Matti, Maria Flors Mor-Ruiz +2 more

We develop analytical and algorithmic techniques that enable efficient simulation of a broad class of noisy stabilizer circuits. We derive closed-form expressions of expectation values for tensor product of Paulis in circuits with non-deterministic Pauli measurements, yielding an efficient strong simulation method that avoids explicit density matrix construction and enables direct noise parameter sweeps. We introduce a circuit compression framework that reduces the per-sample cost of weak simulation in general noisy stabilizer circuits, including deterministic measurements, by separating parameter-independent preprocessing from sampling. Finally, we extend the analytical framework beyond its standard domain to include a small number of deterministic measurements, general rotations, and non-diagonal noise channels. Our results provide a unified framework for both strong and weak simulation of noisy stabilizer circuits and corresponds to an extension of the noisy stabilizer formalism introduced in \cite{PhysRevA.107.032424}. They offer applications ranging from calculation of the expectation values of entanglement witnesses, determination of reduced states, to energy evaluation.

quant-pharXiv:2604.22588•Apr 27, 2026•1 citation

Simulation of noisy quantum circuits using frame representations

Janek Denzler, Jose Carrasco, Jens Eisert +1 more

One of the core research questions in the theory of quantum computing is to find out to what precise extent the classical simulation of a noisy quantum circuits is possible and where potential quantum advantages can set in. In this work, we introduce a unified framework for the classical simulation of quantum circuits based on frame theory, encompassing and generalizing a broad class of existing simulation strategies. Within this framework, the computational cost of a simulation algorithm is determined by the one-norm of an associated quasi-probability distribution, providing a common quantitative measure across different simulation approaches. This enables a comprehensive perspective on common methods for the simulation of noisy circuits based on different quantum resources, such as entanglement or non-stabilizerness. It further provides a clear scheme for generating novel classical simulation algorithms. Indeed, by exploring different choices of frames within this formalism and resorting to tools of convex optimization, we are able not only to obtain new insights and improved bounds for existing methods -- such as stabilizer state simulation or Pauli back-propagation -- but also to discover a new approach with an improved performance based on a generalization of the Pauli frame. We, thereby, show that classical simulation techniques can directly benefit from a perspective -- that of frames -- that goes beyond the traditional classification of quantum resources.

quant-pharXiv:2601.05131•Jan 9, 2026•6 citations

Classical simulation of a quantum circuit with noisy magic inputs

Jiwon Heo, Sojeong Park, Changhun Oh

Magic states are essential for universal quantum computation and are widely viewed as a key source of quantum advantage, yet in realistic devices they are inevitably noisy. In this work, we characterize how noise on injected magic resources changes the classical simulability of quantum circuits and when it induces a transition from classically intractable behavior to efficient classical simulation. We adopt a resource-centric noise model in which only the injected magic components are noisy, while the baseline states, operations, and measurements belong to an efficiently simulable family. Within this setting, we develop an approximate classical sampling algorithm with controlled error and prove explicit noise-dependent conditions under which the algorithm runs in polynomial time. Our framework applies to both qubit circuits with Clifford baselines and fermionic circuits with matchgate baselines, covering representative noise channels such as dephasing and particle loss. We complement the analysis with numerical estimates of the simulation cost, providing concrete thresholds and runtime scaling across practically relevant parameter regimes.

quant-pharXiv:2601.10111•Jan 16, 2026•2 citations
Noise in quantum operations often negates the advantage of quantum computation. However, most classical simulations of quantum computers calculate the ideal probability amplitudes by either storing full state vectors or using sophisticated tensor-network contractions. Here we investigate sampling-based classical simulation methods for noisy quantum circuits. Specifically, we characterize the simulation costs of two major schemes, stabilizer-state sampling of magic states and Heisenberg propagation, for quantum circuits subject to stochastic Pauli noise, such as depolarizing and dephasing noise. To this end, we introduce several techniques for the stabilizer-state sampling to reduce the simulation costs under such noise. It is revealed that in the low-noise regime, stabilizer-state sampling results in a smaller sampling cost, while Heisenberg propagation is better in the high-noise regime. Furthermore, for a high depolarizing noise rate of approximately 10%, these methods provide better scaling than that given by the low-rank stabilizer decomposition. We believe that this knowledge of classical simulation costs is useful to achieve possible quantum advantage on near-term noisy quantum devices as well as efficient classical simulation methods.
As quantum devices continue to improve in scale and precision, a central challenge is how to effectively utilize noisy hardware for meaningful computation. Most existing approaches aim to recover noiseless circuit outputs from noisy ones through error mitigation or correction. Here, we show that noisy quantum devices can be directly leveraged as computational resources to enhance the classical simulation of quantum circuits. We introduce the Noisy-device-enhanced Classical Simulation (NDE-CS) protocol, which improves stabilizer-based classical Monte Carlo simulation methods by incorporating data obtained from noisy quantum hardware. Specifically, NDE-CS uses noisy executions of a target circuit together with noisy Clifford circuits to learn how the target circuit can be expressed in terms of Clifford circuits under realistic noise. The same learned relation can then be reused in the noiseless Clifford limit, enabling accurate estimation of ideal expectation values with substantially reduced sampling cost. Numerical simulations on Trotterized Ising circuits demonstrate that NDE-CS achieves orders-of-magnitude reductions in sampling cost compared to the underlying purely classical Monte Carlo approaches from which it is derived, while maintaining the same accuracy. We also compare NDE-CS with Sparse Pauli Dynamics (SPD), a powerful classical framework capable of simulating quantum circuits at previously inaccessible scales, and provide an example where the cost of SPD scales exponentially with system size, while NDE-CS scales much more favorably. These results establish NDE-CS as a scalable hybrid simulation approach for quantum circuits, where noise can be harnessed as a computational asset.
Quantum circuit simulators running on classical computers offer a vital platform for designing, testing, and optimizing quantum algorithms, driving innovation despite limited access to real quantum hardware. However, their scalability is inherently constrained by exponential memory and computational overhead, which restricts accurate simulation of large-scale quantum circuits and often results in approximate output distributions. Here, we propose an exact sampling algorithm that integrates tensor network contraction techniques with a Markov process, wherein a classical state evolves according to the local structure of the quantum circuit. As a demonstration, we target the challenge of generating samples from ideal and noisy QAOA circuits with up to 476 qubits, incorporating both depolarizing and amplitude damping noise models. These results enable further validation of several assumptions and conjectures at a scale previously out of reach, significantly expanding the scope of classical simulation in quantum algorithm research.
Due to the unreliability and limited capacity of existing quantum computer prototypes, quantum circuit simulation continues to be a vital tool for validating next generation quantum computers and for studying variational quantum algorithms, which are among the leading candidates for useful quantum computation. Existing quantum circuit simulators do not address the common traits of variational algorithms, namely: 1) their ability to work with noisy qubits and operations, 2) their repeated execution of the same circuits but with different parameters, and 3) the fact that they sample from circuit final wavefunctions to drive a classical optimization routine. We present a quantum circuit simulation toolchain based on logical abstractions targeted for simulating variational algorithms. Our proposed toolchain encodes quantum amplitudes and noise probabilities in a probabilistic graphical model, and it compiles the circuits to logical formulas that support efficient repeated simulation of and sampling from quantum circuits for different parameters. Compared to state-of-the-art state vector and density matrix quantum circuit simulators, our simulation approach offers greater performance when sampling from noisy circuits with at least eight to 20 qubits and with around 12 operations on each qubit, making the approach ideal for simulating near-term variational quantum algorithms. And for simulating noise-free shallow quantum circuits with 32 qubits, our simulation approach offers a 66× reduction in sampling cost versus quantum circuit simulation techniques based on tensor network contraction.
We develop analytical and algorithmic techniques that enable efficient simulation of a broad class of noisy stabilizer circuits. We derive closed-form expressions of expectation values for tensor product of Paulis in circuits with non-deterministic Pauli measurements, yielding an efficient strong simulation method that avoids explicit density matrix construction and enables direct noise parameter sweeps. We introduce a circuit compression framework that reduces the per-sample cost of weak simulation in general noisy stabilizer circuits, including deterministic measurements, by separating parameter-independent preprocessing from sampling. Finally, we extend the analytical framework beyond its standard domain to include a small number of deterministic measurements, general rotations, and non-diagonal noise channels. Our results provide a unified framework for both strong and weak simulation of noisy stabilizer circuits and corresponds to an extension of the noisy stabilizer formalism introduced in \cite{PhysRevA.107.032424}. They offer applications ranging from calculation of the expectation values of entanglement witnesses, determination of reduced states, to energy evaluation.
One of the core research questions in the theory of quantum computing is to find out to what precise extent the classical simulation of a noisy quantum circuits is possible and where potential quantum advantages can set in. In this work, we introduce a unified framework for the classical simulation of quantum circuits based on frame theory, encompassing and generalizing a broad class of existing simulation strategies. Within this framework, the computational cost of a simulation algorithm is determined by the one-norm of an associated quasi-probability distribution, providing a common quantitative measure across different simulation approaches. This enables a comprehensive perspective on common methods for the simulation of noisy circuits based on different quantum resources, such as entanglement or non-stabilizerness. It further provides a clear scheme for generating novel classical simulation algorithms. Indeed, by exploring different choices of frames within this formalism and resorting to tools of convex optimization, we are able not only to obtain new insights and improved bounds for existing methods -- such as stabilizer state simulation or Pauli back-propagation -- but also to discover a new approach with an improved performance based on a generalization of the Pauli frame. We, thereby, show that classical simulation techniques can directly benefit from a perspective -- that of frames -- that goes beyond the traditional classification of quantum resources.
Magic states are essential for universal quantum computation and are widely viewed as a key source of quantum advantage, yet in realistic devices they are inevitably noisy. In this work, we characterize how noise on injected magic resources changes the classical simulability of quantum circuits and when it induces a transition from classically intractable behavior to efficient classical simulation. We adopt a resource-centric noise model in which only the injected magic components are noisy, while the baseline states, operations, and measurements belong to an efficiently simulable family. Within this setting, we develop an approximate classical sampling algorithm with controlled error and prove explicit noise-dependent conditions under which the algorithm runs in polynomial time. Our framework applies to both qubit circuits with Clifford baselines and fermionic circuits with matchgate baselines, covering representative noise channels such as dephasing and particle loss. We complement the analysis with numerical estimates of the simulation cost, providing concrete thresholds and runtime scaling across practically relevant parameter regimes.