Challenges
Datasets
Workspaces
Papers
Discussions
Leaderboard
Log inSign up
Challenges
Datasets
Workspaces
Papers
Discussions
Leaderboard
Blog
Job Board
Q3AS

© 2026 Aqora Quantum S.A.S.

TermsPrivacyLegal Notice

arXiv:2009.12655

Nondisturbing Quantum Measurement Models

Stanley Gudder

Published Sep 26, 2020• 0 citations
arXivHTMLPDF

Abstract

A measurement model is a framework that describes a quantum measurement process. In this article we restrict attention to $MM$s on finite-dimensional Hilbert spaces. Suppose we want to measure an observable $A$ whose outcomes $A_x$ are represented by positive operators (effects) on a Hilbert Space $H$. We call $H$ the base or object system. We interact $H$ with a probe system on another Hilbert space $K$ by means of a quantum channel. The probe system contains a probe (or meter or pointer) observable $F$ whose outcomes $F_x$ are measured by an apparatus that is frequently (but need not be) classical in practice. The $MM$ protocol gives a method for determining the probability of an outcome $A_x$ for any state of $H$ in terms of the outcome $F_x$. The interaction channel usually entangles this state with an initial probe state of $K$ that can be quite complicated. However, if the channel is nondisturbing in a sense that we describe, then the entanglement is considerably simplified. In this article, we give formulas for observables and instruments measured by nondisturbing $MM$s. We begin with a general discussion of nondisturbing operators relative to a quantum context. We present two examples that illustrate this theory in terms of unitary nondisturbing channels.

DOI
10.48550/arxiv.2009.12655

Related papers

Quantum Channel Conditioning and Measurement Models

Stanley Gudder

If $H_1$ and $H_2$ are finite-dimensional Hilbert spaces, a channel from $H_1$ to $H_2$ is a completely positive, linear map $\mathcal{I}$ that takes the set of states $\mathcal{S}(H_1)$ for $H_1$ to the set of states $\mathcal{S}(H_2)$ for $H_2$. Corresponding to $\mathcal{I}$ there is a unique dual map $\mathcal{I}^*$ from the set of effects $\mathcal{E}(H_2)$ for $H_2$ to the set of effects $\mathcal{E}(H_1)$ for $H_1$. We call $\mathcal{I}^*(b)$ the effect $b$ conditioned by $\mathcal{I}$ and the set $\mathcal{I}^c = \mathcal{I}^*(\mathcal{E}(H_2))$ the conditioned set of $\mathcal{I}$. We point out that $\mathcal{I}^c$ is a convex subeffect algebra of the effect algebra $\mathcal{E}(H_1)$. We extend this definition to the conditioning $\mathcal{I}^*(B)$ for an observable $B$ on $H_2$ and say that an observable $A$ is in $\mathcal{I}^c$ if $A=\mathcal{I}^*(B)$ for some observable $B$. We show that $\mathcal{I}^c$ is closed under post-processing and taking parts. We also define the conditioning of instruments by channels. These concepts are illustrated using examples of Holevo instruments and channels. We next discuss measurement models and their corresponding observables and instruments. We show that calculations can be simplified by employing Kraus and Holevo separable channels. Such channels allow one to separate the components of a tensor product.

arXiv:2403.08126•Mar 12, 2024•0 citations

Measurement Models with Separable Interaction Channels

Stanley Gudder

Measurement models (MMs) stand at the highest structural level of quantum measurement theory. MMs can be employed to construct instruments which stand at the next level. An instrument is thought of as an apparatus that is used to measure observables and update states. Observables, which are still at the next level, are used to determine probabilities of quantum events. The main ingredient of an MM is an interaction channel $ν$ between the system being measured and a probe system. For a general $ν$, the measured observable $A$ need not have an explicit useful form. In this work we introduce a condition for $ν$ called separability and in this case $A$ has an explicit form. Under the assumption that $ν$ is separable, we study product MMs and conditioned MMs. We also consider the statistics of MMs and their uncertainty principle. Various concepts are illustrated using examples of Lüders and Holevo instruments.

arXiv:2308.09785•Aug 18, 2023•0 citations

Nondisturbing quantum measurements

Teiko Heinosaari, Michael M. Wolf

We consider pairs of discrete quantum observables (POVMs) and analyze the relation between the notions of nondisturbance, joint measurability, and commutativity. We specify conditions under which these properties coincide or differ—depending, for instance, on the interplay between the number of outcomes and the Hilbert space dimension or on algebraic properties of the effect operators. We also show that (non-)disturbance is, in general, not a symmetric relation and that it can be decided and quantified by means of a semidefinite program.

arXiv:1005.5659•Journal of Mathematical Physics•Sep 1, 2010•88 citations

Measurement models and instruments

Teiko Heinosaari, Mário Ziman

Until now we have treated measurement apparatuses as devices taking quantum systems as their inputs and producing measurement outcomes as outputs. At this level of description, measurement apparatuses are fully described by observables, as discussed in Chapter 3. The measurement outcome distribution is determined by the particular input state and the observable describing the measurement device. In this chapter we explore a mathematical framework suitable for the description of measurement apparatuses for which, in addition to the measurement outcomes, the measured systems are available after the measurement is performed. In such cases we may try to obtain more information on the system by measuring some other observable, or, perhaps by filtering out some preferred output states we may use our measurement apparatus as a preparator. Clearly, in this kind of situation we need a description of measurement apparatuses that is more detailed than that of observables. Therefore, two more refined concepts, measurement models and instruments , will be investigated in this chapter. There is no customary name for a measurement model. As used here, it was first formalized in a general way by Ozawa [106], [107] who referred to the measurement process . A comprehensive general reference on quantum measurements is the monograph by Busch et al. [35], where measurement models are called premeasurements . Some other authors use the term indirect measurements . Three levels of description of measurements It is convenient to think of three levels of description when considering measurements.

Cambridge University Press eBooks•Dec 15, 2011•0 citations

The Quantum Theory of Measurement (2nd edn)

John M. Myers

The newly revised edition of this well-known book categorizes prevalent views on measurement as described by quantum mechanics, discusses basics agreed to by many who on other issues disagree, and describes some of the problems. Although many paragraphs rest unchanged from the first (1991) edition, results found since 1991 are used to reorganize and sharpen the focus of the book, so that even the old paragraphs are now understood differently and more clearly. One advance in the second edition is a new and more general no-go theorem; another is separation of formal derivations from interpretation. The dozen or so definitions essential to following the book even casually are stated clearly. By this means the authors succeed pretty well in achieving their stated desire to make the book comprehensible to those who do not share their philosophic predispositions. While I differ in philosophy from the authors, attending to their discussion uncovered weaknesses in my own thinking and improved it. The mathematical language of quantum mechanics expresses a system under measurement by states (as rays in a Hilbert space) and a hamiltonian operator, distinct from the apparatus that produces outcomes, which is expressed by a positive operator-valued (POV) measure. In this way quantum language separates state preparation from state measurement. Often the Hilbert space is viewed as a tensor product of subspaces, allowing further conceptual separations. The authors take the stance that quantum mechanics calls for splitting the empirical world into parts, the most essential being (1) objective systems S (to be observed) and (2) apparatus A (preparation and registration devices that produces outcomes (or, as the authors write, definite pointer values) of the observed system). In some interpretations, one or both of an observer and an environment appear as additional parts. What is to be included in the system S versus the apparatus A is not specified by the language, but is open to the theoretician; a probe, for example, can be analysed as either part of the apparatus or as part of the system, as was discussed by von Neumann in work cited by the authors. With what should a theory of measurement be concerned? A broad division of approaches is defined by how one answers the question: should one try to do away with the cut between measuring apparatus and system? The authors phrase this as a choice of REFERENT, a term which in my mind puts them on shaky semantic ground; anyway The Quantum Theory of Measurement is concerned with implications of the `yes'. The book unfolds with the power of a tragedy, in which the logical consequences lead, step-by-step, to the statement and proof of theorem 6.2.1, which, roughly speaking, asserts the non-existence of a solution to the problem of getting definite pointer values from measuring apparatus that exhibits the superposition demanded by its description as a quantum system. Possible responses to this theorem are discussed, among them the many-worlds interpretation and a modification of quantum mechanics that elevates decoherence to a principle. Citations of the literature are thorough, and many points of view are crisply summarized. The book is indispensable to both those who work in the broad direction chosen by the authors and to those who wish to set any other direction in context.

Measurement Science and Technology•May 1, 1997•47 citations

Finite Quantum Instruments

Stanley Gudder

This article considers quantum systems described by a finite-dimensional complex Hilbert space $H$. We first define the concept of a finite observable on $H$. We then discuss ways of combining observables in terms of convex combinations, post-processing and sequential products. We also define complementary and coexistent observables. We then introduce finite instruments and their related compatible observables. The previous combinations and relations for observables are extended to instruments and their properties are compared. We present four types of instruments; namely, identity, trivial, Lüders and Kraus instruments. These types are used to illustrate different ways that instruments can act. We next consider joint probabilities for observables and instruments. The article concludes with a discussion of measurement models and the instruments they measure.

arXiv:2005.13642•May 27, 2020•5 citations
A measurement model is a framework that describes a quantum measurement process. In this article we restrict attention to MMMMMMs on finite-dimensional Hilbert spaces. Suppose we want to measure an observable AAA whose outcomes AxA_xAx​ are represented by positive operators (effects) on a Hilbert Space HHH. We call HHH the base or object system. We interact HHH with a probe system on another Hilbert space KKK by means of a quantum channel. The probe system contains a probe (or meter or pointer) observable FFF whose outcomes FxF_xFx​ are measured by an apparatus that is frequently (but need not be) classical in practice. The MMMMMM protocol gives a method for determining the probability of an outcome AxA_xAx​ for any state of HHH in terms of the outcome FxF_xFx​. The interaction channel usually entangles this state with an initial probe state of KKK that can be quite complicated. However, if the channel is nondisturbing in a sense that we describe, then the entanglement is considerably simplified. In this article, we give formulas for observables and instruments measured by nondisturbing MMMMMMs. We begin with a general discussion of nondisturbing operators relative to a quantum context. We present two examples that illustrate this theory in terms of unitary nondisturbing channels.
If H1H_1H1​ and H2H_2H2​ are finite-dimensional Hilbert spaces, a channel from H1H_1H1​ to H2H_2H2​ is a completely positive, linear map I\mathcal{I}I that takes the set of states S(H1)\mathcal{S}(H_1)S(H1​) for H1H_1H1​ to the set of states S(H2)\mathcal{S}(H_2)S(H2​) for H2H_2H2​. Corresponding to I\mathcal{I}I there is a unique dual map I∗\mathcal{I}^*I∗ from the set of effects E(H2)\mathcal{E}(H_2)E(H2​) for H2H_2H2​ to the set of effects E(H1)\mathcal{E}(H_1)E(H1​) for H1H_1H1​. We call I∗(b)\mathcal{I}^*(b)I∗(b) the effect bbb conditioned by I\mathcal{I}I and the set Ic=I∗(E(H2))\mathcal{I}^c = \mathcal{I}^*(\mathcal{E}(H_2))Ic=I∗(E(H2​)) the conditioned set of I\mathcal{I}I. We point out that Ic\mathcal{I}^cIc is a convex subeffect algebra of the effect algebra E(H1)\mathcal{E}(H_1)E(H1​). We extend this definition to the conditioning I∗(B)\mathcal{I}^*(B)I∗(B) for an observable BBB on H2H_2H2​ and say that an observable AAA is in Ic\mathcal{I}^cIc if A=I∗(B)A=\mathcal{I}^*(B)A=I∗(B) for some observable BBB. We show that Ic\mathcal{I}^cIc is closed under post-processing and taking parts. We also define the conditioning of instruments by channels. These concepts are illustrated using examples of Holevo instruments and channels. We next discuss measurement models and their corresponding observables and instruments. We show that calculations can be simplified by employing Kraus and Holevo separable channels. Such channels allow one to separate the components of a tensor product.
Measurement models (MMs) stand at the highest structural level of quantum measurement theory. MMs can be employed to construct instruments which stand at the next level. An instrument is thought of as an apparatus that is used to measure observables and update states. Observables, which are still at the next level, are used to determine probabilities of quantum events. The main ingredient of an MM is an interaction channel ννν between the system being measured and a probe system. For a general ννν, the measured observable AAA need not have an explicit useful form. In this work we introduce a condition for ννν called separability and in this case AAA has an explicit form. Under the assumption that ννν is separable, we study product MMs and conditioned MMs. We also consider the statistics of MMs and their uncertainty principle. Various concepts are illustrated using examples of Lüders and Holevo instruments.
We consider pairs of discrete quantum observables (POVMs) and analyze the relation between the notions of nondisturbance, joint measurability, and commutativity. We specify conditions under which these properties coincide or differ—depending, for instance, on the interplay between the number of outcomes and the Hilbert space dimension or on algebraic properties of the effect operators. We also show that (non-)disturbance is, in general, not a symmetric relation and that it can be decided and quantified by means of a semidefinite program.
Until now we have treated measurement apparatuses as devices taking quantum systems as their inputs and producing measurement outcomes as outputs. At this level of description, measurement apparatuses are fully described by observables, as discussed in Chapter 3. The measurement outcome distribution is determined by the particular input state and the observable describing the measurement device. In this chapter we explore a mathematical framework suitable for the description of measurement apparatuses for which, in addition to the measurement outcomes, the measured systems are available after the measurement is performed. In such cases we may try to obtain more information on the system by measuring some other observable, or, perhaps by filtering out some preferred output states we may use our measurement apparatus as a preparator. Clearly, in this kind of situation we need a description of measurement apparatuses that is more detailed than that of observables. Therefore, two more refined concepts, measurement models and instruments , will be investigated in this chapter. There is no customary name for a measurement model. As used here, it was first formalized in a general way by Ozawa [106], [107] who referred to the measurement process . A comprehensive general reference on quantum measurements is the monograph by Busch et al. [35], where measurement models are called premeasurements . Some other authors use the term indirect measurements . Three levels of description of measurements It is convenient to think of three levels of description when considering measurements.
The newly revised edition of this well-known book categorizes prevalent views on measurement as described by quantum mechanics, discusses basics agreed to by many who on other issues disagree, and describes some of the problems. Although many paragraphs rest unchanged from the first (1991) edition, results found since 1991 are used to reorganize and sharpen the focus of the book, so that even the old paragraphs are now understood differently and more clearly. One advance in the second edition is a new and more general no-go theorem; another is separation of formal derivations from interpretation. The dozen or so definitions essential to following the book even casually are stated clearly. By this means the authors succeed pretty well in achieving their stated desire to make the book comprehensible to those who do not share their philosophic predispositions. While I differ in philosophy from the authors, attending to their discussion uncovered weaknesses in my own thinking and improved it. The mathematical language of quantum mechanics expresses a system under measurement by states (as rays in a Hilbert space) and a hamiltonian operator, distinct from the apparatus that produces outcomes, which is expressed by a positive operator-valued (POV) measure. In this way quantum language separates state preparation from state measurement. Often the Hilbert space is viewed as a tensor product of subspaces, allowing further conceptual separations. The authors take the stance that quantum mechanics calls for splitting the empirical world into parts, the most essential being (1) objective systems S (to be observed) and (2) apparatus A (preparation and registration devices that produces outcomes (or, as the authors write, definite pointer values) of the observed system). In some interpretations, one or both of an observer and an environment appear as additional parts. What is to be included in the system S versus the apparatus A is not specified by the language, but is open to the theoretician; a probe, for example, can be analysed as either part of the apparatus or as part of the system, as was discussed by von Neumann in work cited by the authors. With what should a theory of measurement be concerned? A broad division of approaches is defined by how one answers the question: should one try to do away with the cut between measuring apparatus and system? The authors phrase this as a choice of REFERENT, a term which in my mind puts them on shaky semantic ground; anyway The Quantum Theory of Measurement is concerned with implications of the `yes'. The book unfolds with the power of a tragedy, in which the logical consequences lead, step-by-step, to the statement and proof of theorem 6.2.1, which, roughly speaking, asserts the non-existence of a solution to the problem of getting definite pointer values from measuring apparatus that exhibits the superposition demanded by its description as a quantum system. Possible responses to this theorem are discussed, among them the many-worlds interpretation and a modification of quantum mechanics that elevates decoherence to a principle. Citations of the literature are thorough, and many points of view are crisply summarized. The book is indispensable to both those who work in the broad direction chosen by the authors and to those who wish to set any other direction in context.
This article considers quantum systems described by a finite-dimensional complex Hilbert space HHH. We first define the concept of a finite observable on HHH. We then discuss ways of combining observables in terms of convex combinations, post-processing and sequential products. We also define complementary and coexistent observables. We then introduce finite instruments and their related compatible observables. The previous combinations and relations for observables are extended to instruments and their properties are compared. We present four types of instruments; namely, identity, trivial, Lüders and Kraus instruments. These types are used to illustrate different ways that instruments can act. We next consider joint probabilities for observables and instruments. The article concludes with a discussion of measurement models and the instruments they measure.