Abstract We study the thermodynamic performance of a finite-time non-regenerative quantum Stirling-like cycle used as a heat engine. We consider specifically the case in which the working substance (WS) is a two-level system (TLS). The Stirling cycle is made of two isochoric transformations separated by a compression and an expansion stroke during which the WS is in contact with a thermal reservoir. To describe these two strokes we derive a non-Markovian master equation which allows to study the real-time dynamics of a driven open quantum system with arbitrary fast driving. Following the real-time dynamics of the WS using this master equation, the endpoints of the isotherms can deviate from the equilibrium thermal states. The role of this deviation in the performance of the heat engine is addressed. We found that the finite-time dynamics and thermodynamics of the cycle depend non-trivially on the different time scales at play. In particular, driving the WS at a time scale comparable to the resonance time of the bath enhances the performance of the cycle and allows for an efficiency higher than the efficiency of the quasistatic cycle, but still below the Carnot bound. However, by adding thermalization of the WS with the baths at the end of compression/expansion processes one recovers the conventional scenario in which efficiency decreases by speeding up the processes. In addition, the performance of the cycle is dependent on the compression/expansion speeds asymmetrically, which suggests new freedom in optimizing quantum heat engines. The maximum output power and the maximum efficiency are obtained almost simultaneously when the real-time endpoints of the compression/expansion processes are considered instead of the equilibrium thermal endpoint states. However, the net extractable work always declines by speeding up the drive.
Abstract We study the thermodynamic performance of a finite-time non-regenerative quantum Stirling-like cycle used as a heat engine. We consider specifically the case in which the working substance (WS) is a two-level system (TLS). The Stirling cycle is made of two isochoric transformations separated by a compression and an expansion stroke during which the WS is in contact with a thermal reservoir. To describe these two strokes we derive a non-Markovian master equation which allows to study the real-time dynamics of a driven open quantum system with arbitrary fast driving. Following the real-time dynamics of the WS using this master equation, the endpoints of the isotherms can deviate from the equilibrium thermal states. The role of this deviation in the performance of the heat engine is addressed. We found that the finite-time dynamics and thermodynamics of the cycle depend non-trivially on the different time scales at play. In particular, driving the WS at a time scale comparable to the resonance time of the bath enhances the performance of the cycle and allows for an efficiency higher than the efficiency of the quasistatic cycle, but still below the Carnot bound. However, by adding thermalization of the WS with the baths at the end of compression/expansion processes one recovers the conventional scenario in which efficiency decreases by speeding up the processes. In addition, the performance of the cycle is dependent on the compression/expansion speeds asymmetrically, which suggests new freedom in optimizing quantum heat engines. The maximum output power and the maximum efficiency are obtained almost simultaneously when the real-time endpoints of the compression/expansion processes are considered instead of the equilibrium thermal endpoint states. However, the net extractable work always declines by speeding up the drive.
In a quantum Stirling heat engine, the heat exchanged with two thermal baths is partly utilized for performing work by redistributing the energy levels of the working substance. We analyze the thermodynamics of a quantum Stirling engine operating in finite time. We develop a model in which a time-dependent potential barrier changes the energy-level structure of the working substance. The process takes place under a constant interaction with the thermal bath. We further show that in the limit of slow operation of the cycle and low temperature, the efficiency of such an engine approaches Carnot efficiency. We also show that the maximum output power, for the strokes that affect the energy levels, is obtained at an intermediate operating speed, demonstrating the importance of a finite-time analysis.
Classical thermodynamics, also called equilibrium thermodynamics, is a theory that deals with macroscopic systems in equilibrium. After its development, other theories emerged to encompass macroscopic out-of-equilibrium systems. Over the past few decades, researchers have developed a new theory to describe also the thermodynamics of microscopic quantum systems, which became known as quantum thermodynamics. An important application of this theory is in the development of heat engines in which the working substance (the substance responsible for transforming heat into work) is a microscopic quantum system. Due to their composition, these devices came to be commonly called quantum heat engines. Notably, recent studies have shown that using an out-of-equilibrium reservoir as a heat source can improve the performance of quantum heat engines, compared to the usual case where the heat source is an equilibrium reservoir (a thermal reservoir). In this context, this thesis presents two studies related to a quantum Otto heat engine whose working substance is a two-level system: in the first study, the engine has a squeezed thermal reservoir as the heat source, while in the second study, the heat source is a reservoir with a negative temperature. Both studies explore the finite-time regime of the expansion and compression stages of the heat engine. The first study shows that the engine efficiency can be greater than the Carnot efficiency in both the quasi-static and finite-time regimes. However, as in the usual case, decreasing the time of the expansion and compression stages degrades the engine efficiency. In its turn, the second study shows that the engine efficiency can surpass the Otto efficiency in the finite-time regime. Here, different from the usual case, decreasing the time of the expansion and compression stages can increase the engine's efficiency. Finally, the present thesis shows an experimental scheme in the nuclear magnetic resonance context able to provide a proof of concept for the engine in the different situations studied.
We study the standard four-stroke regenerative quantum Stirling heat engine cycle, which assumes local thermal equilibrium at each stage, within the standard weak-coupling, Markovian open quantum system framework. We point out that the regeneration process is not thermodynamically free in a reduced open-system description, and we treat the required work input as an explicit regeneration cost by modifying the cycle efficiency accordingly. We consider two working substances--a single spin-1/2 and a pair of interacting spin-1/2 particles--and investigate the cycle performance by taking the regeneration cost at its minimum value set by the Carnot heat-pump limit. For comparison, we also analyze the conventional Stirling cycle without regeneration under the same conditions. The super-Carnot efficiencies reported under the cost-free regeneration assumption disappear once the regeneration cost is included: the modified efficiency stays below the Carnot bound, while still remaining higher than the efficiency of the conventional Stirling cycle. For the conventional Stirling cycle, we provide a rigorous Carnot bound using quantum relative entropy, whereas for the regenerative cycle we derive a sufficient lower bound on the regeneration cost that guarantees thermodynamic consistency. Finally, we suggest three candidate quantum regenerator models for future work.
We consider the finite-time operation of a quantum heat engine whose working substance is composed of a two-level atomic system. The engine cycle, consisting of two quantum adiabatic and two quantum isochoric (constant-frequency) processes and working between two heat reservoirs at temperatures Th and Tc(<Th), is a quantum version of the classical Otto cycle. By optimizing the power output with respect to two frequencies, we obtain the efficiency at maximum power output (EMP) and analyze numerically the effects of the times taken for two adiabatic and two isochoric processes on the EMP. In the absence of internally dissipative friction, we find that the EMP is bounded from the upper side by a function of the Carnot efficiency ${\ensuremath{\eta}}_{C}$, ${\ensuremath{\eta}}_{+}={\ensuremath{\eta}}_{C}^{2}/[{\ensuremath{\eta}}_{C}\ensuremath{-}(1\ensuremath{-}{\ensuremath{\eta}}_{C})\mathrm{ln}(1\ensuremath{-}{\ensuremath{\eta}}_{C})]$, with ${\ensuremath{\eta}}_{C}=1\ensuremath{-}{T}_{c}/{T}_{h}$. This analytic expression is confirmed by our exact numerical result and is identical to the one derived in an engine model based on a mesoscopic or macroscopic system. If the internal friction is included, we find that the EMP decreases as the friction coefficient increases.
The study of quantum thermodynamics is key to the development of quantum thermal machines. In contrast to most of the previous proposals based on discrete strokes, here we consider a working substance that is permanently coupled to two or more baths at different temperatures and continuously driven. To this end, we investigate parametrically driven quantum harmonic oscillators coupled to heat baths via a collision model. Using a thermodynamically consistent local master equation, we derive the heat flows and power of the working device, which can operate as an engine, refrigerator, or accelerator, and analyze the instantaneous and average efficiencies and coefficients of performance. Studying the regimes of both slow and fast driving of the system, we find that an increased driving frequency can lead to a change of functioning to a dissipator. Finally, we investigate the effect of squeezing one of the thermal baths: it leads to an apparent higher efficiency compared to the corresponding Carnot value of an equilibrium bath with the same temperature and to sustained entanglement between the working substance oscillators in the limit cycle.
We study a quantum Otto engine at finite time, where the working substance is composed of a two-level system interacting with a harmonic oscillator, described by the quantum Rabi model. We obtain the limit cycle and calculate the total work extracted, efficiency, and power of the engine by numerically solving the master equation describing the open system dynamics. We relate the total work extracted and the efficiency at maximum power with the quantum correlations embedded in the working substance, which we consider through entanglement of formation and quantum discord. Interestingly, we find that the engine can overcome the Curzon-Ahlborn efficiency when the working substance is in the ultrastrong coupling regime. This high-efficiency regime roughly coincides with the cases where the entanglement in the working substance experiences the greatest reduction in the hot isochoric stage. Our results highlight the efficiency performance of correlated working substances for quantum heat engines.