Challenges
Datasets
Workspaces
Papers
Discussions
Leaderboard
Log inSign up
Challenges
Datasets
Workspaces
Papers
Discussions
Leaderboard
Blog
Job Board
Q3AS

© 2026 Aqora Quantum S.A.S.

TermsPrivacyLegal Notice

arXiv:2009.08840 · Quantum

Lightweight Detection of a Small Number of Large Errors in a Quantum Circuit

Noah Linden, Ronald de Wolf

Published Apr 20, 2021• 4 citations
arXivHTMLPDF

Abstract

Suppose we want to implement a unitary U , for instance a circuit for some quantum algorithm. Suppose our actual implementation is a unitary U~ , which we can only apply as a black-box. In general it is an exponentially-hard task to decide whether U~ equals the intended U , or is significantly different in a worst-case norm. In this paper we consider two special cases where relatively efficient and lightweight procedures exist for this task.First, we give an efficient procedure under the assumption that U and U~ (both of which we can now apply as a black-box) are either equal, or differ significantly in only one k -qubit gate, where k=O(1) (the k qubits need not be contiguous). Second, we give an even more lightweight procedure under the assumption that U and U~ are Clifford circuits which are either equal, or different in arbitrary ways (the specification of U is now classically given while U~ can still only be applied as a black-box). Both procedures only need to run U~ a constant number of times to detect a constant error in a worst-case norm. We note that the Clifford result also follows from earlier work of Flammia and Liu, and da Silva, Landon-Cardinal, and Poulin.In the Clifford case, our error-detection procedure also allows us efficiently to learn (and hence correct) U~ if we have a small list of possible errors that could have happened to U ; for example if we know that only O(1) of the gates of U~ are wrong, this list will be polynomially small and we can test each possible erroneous version of U for equality with U~ .

DOI
10.22331/q-2021-04-20-436

Related papers

An algorithm for the T-countAn algorithm for the T-count

David Gosset, Vadym Kliuchnikov, Michele Mosca +1 more

We consider quantum circuits composed of Clifford and $T$ gates. In this context the $T$ gate has a special status since it confers universal computation when added to the (classically simulable) Clifford gates. However it can be very expensive to implement fault-tolerantly. We therefore view this gate as a resource which should be used only when necessary. Given an $n$-qubit unitary $U$ we are interested in computing a circuit that implements it using the minimum possible number of $T$ gates (called the $T$-count of $U$). A related task is to decide if the $T$-count of $U$ is less than or equal to $m$; we consider this problem as a function of $N=2^n$ and $m$. We provide a classical algorithm which solves it using time and space both upper bounded as $\mathcal{O}(N^m \text{poly}(m,N))$. We implemented our algorithm and used it to show that any Clifford+T circuit for the Toffoli or the Fredkin gate requires at least 7 $T$ gates. This implies that the known 7 $T$ gate circuits for these gates are $T$-optimal. We also provide a simple expression for the $T$-count of single-qubit unitaries.

arXiv:1308.4134•Quantum Information and Computation•Nov 1, 2014•140 citations

Clifford Testing: Algorithms and Lower Bounds

Marcel Hinsche, Zongbo Bao, Philippe van Dordrecht +3 more

We consider the problem of Clifford testing, which asks whether a black-box n-qubit unitary is a Clifford unitary or at least ε-far from every Clifford unitary. We give the first 4-query Clifford tester, which decides this problem with probability poly(ε). This contrasts with the minimum of 6 copies required for the closely-related task of stabilizer testing. We show that our tester is tolerant, by adapting techniques from tolerant stabilizer testing to our setting. In doing so, we settle in the positive a conjecture of Bu, Gu and Jaffe, by proving a polynomial inverse theorem for a non-commutative Gowers 3-uniformity norm. We also consider the restricted setting of single-copy access, where we give an O(n)-query Clifford tester that requires no auxiliary memory qubits or adaptivity. We complement this with a lower bound, proving that any such, potentially adaptive, single-copy algorithm needs at least Ω(n1/4) queries. To obtain our results, we leverage the structure of the commutant of the Clifford group, obtaining several technical statements that may be of independent interest.

arXiv:2510.07164•ACM Symposium on Theory of Computing (STOC)•Jun 9, 2026•5 citations

Trapdoored Clifford Operators and Applications

Minki Hhan, Hojune Lee

Random Clifford operators have numerous applications in quantum computing, including randomized benchmarking, classical shadows, and quantum authentication. However, sampling and implementing uniformly random $n$-qubit Clifford incur near-quadratic complexity due to the size of Clifford group. We introduce a cryptographic way to overcome these barriers: trapdoored Clifford operator distributions whose samples are computationally indistinguishable from uniformly random Cliffords, yet implementing them can be much faster given the trapdoor. We construct a distribution of trapdoored Clifford operators whose elements can be sampled and implemented in near-linear time under a variant of the learning parity with noise assumption. Our constructions allow fast tableau action on Pauli labels for classical simulation, and also can be optimized to admit polylogarithmic-depth implementation. Along the way, we construct trapdoored matrices over finite fields that support efficient multiplication by both a matrix and its inverse, resolving an open question left by Vaikuntanathan and Zamir [SODA'26]. We use these constructions to obtain faster protocols based on random Cliffords. We also explore their applications to the worst-case to average-case reductions for matrix and Clifford problems including the iterated matrix multiplication and Clifford circuit synthesis. In particular, we show the hardness of batching Clifford circuits: synthesizing circuits that apply the same Clifford to multiple registers is at least as hard as worst-case matrix multiplication, even when synthesis succeeds on a small constant fraction of random Cliffords. This extends to approximate implementations by general quantum circuits.

quant-pharXiv:2610.01848•Oct 2, 2026•2 citations

Fast Estimation of Outcome Probabilities for Quantum Circuits

Hakop Pashayan, Oliver Reardon-Smith, Kamil Korzekwa +1 more

We present two classical algorithms for the simulation of universal quantum circuits on n qubits constructed from c instances of Clifford gates and t arbitrary-angle Z-rotation gates such as T gates.Our algorithms complement each other by performing best in different parameter regimes.The ESTIMATE algorithm produces an additive precision estimate of the Born-rule probability of a chosen measurement outcome with the only source of run-time inefficiency being a linear dependence on the stabilizer extent (with scaling approximately equal to 1.17 t for T gates).Our algorithm is state of the art for this task: as an example, in approximately 13 h (on a standard desktop computer), we estimate the Born-rule probability to within an additive error of 0.03, for a 50-qubit, 60 non-Clifford gate quantum circuit with more than 2000 Clifford gates.Our second algorithm, COMPUTE, calculates the probability of a chosen measurement outcome to machine precision with run time O 2 t-r t , where r is an efficiently computable, circuit-specific quantity.With high probability, r is very close to min {t, n -w} for random circuits with many Clifford gates, where w is the number of measured qubits.COMPUTE can be effective in surprisingly challenging parameter regimes, e.g., we can randomly sample Clifford+T circuits with n = 55, w = 5, c = 10 5 , and t = 80 T gates, and then compute the Born-rule probability with a run time consistently less than 10 min using a single core of a standard desktop computer.We provide a C+Python implementation of our algorithms and benchmark them using random circuits, the hidden-shift algorithm, and the quantum approximate optimization algorithm.

arXiv:2101.12223•PRX Quantum•Jun 23, 2022•42 citations

On the Hardness of Approximate Quantum Circuit Membership and Optimization

Adam Husted Kjelstrøm, Jaco van de Pol, Andreas Pavlogiannis

Quantum circuit optimization is an indispensable component of the quantum software stack, used to reduce noise, maximize performance, alleviate costs of quantum error correction, or target specific hardware. A related problem is approximate membership: for a fixed set of unitaries $S$, decide whether a given circuit $C$ is within distance $\varepsilon$ of a unitary in $S$ under some metric $m$. Membership is a special case of optimization, where $S$ is a set of unitaries implementable at no cost (e.g., with noise-minimal circuits, or without magic states). Janzing, Wocjan, and Beth (Int. J. Quantum Inf., 2005) showed that, for the operator metric, the case $S=\{I\}$ (approximate identity) is QMA-complete when $C$ is promised to be either close to the identity or far from it. We generalize this setting in three directions: (i) promise-free inputs, (ii) besides $S=\{I\}$, sets $S$ containing only Clifford unitaries, or only generalized permutation matrices (i.e., no superposition), and (iii) the trace-based, spectral, and operator metrics. We show that, in all cases, approximate membership is PP-hard for wide ranges of $\varepsilon$, provided $C$'s gate-set can implement Clifford+T, as the gate-sets of standard hardware do. If $S=\{I\}$, or if $S$ contains only generalized permutation matrices, $I\in S$, and $m$ is a trace-based distance, PP-hardness holds for all non-trivial $\varepsilon$. If $S=\{I\}$ and $m$ is a trace-based distance, PP-hardness holds even for circuits over classical-reversible gate-sets. Our results indicate that approximate membership is harder over promise-free inputs than the QMA-complete promise version, and that this hardness persists across quantum resources (any gates, non-Clifford, superposition) and distance metrics. They directly imply PP-hardness of circuit optimization when minimizing total, non-Clifford, or superposition gate depth or count.

quant-pharXiv:2611.04381•Nov 4, 2026•0 citations

A polynomial time and space heuristic algorithm for T-count

Michele Mosca, Priyanka Mukhopadhyay

Abstract An important part of reaping computational advantage from a quantum computer is to reduce the quantum resources needed to implement a desired quantum algorithm. Quantum algorithms that are too large to be practical on noisy intermediate scale quantum devices will require fault-tolerant error correction. This work focuses on reducing the physical cost of implementing quantum algorithms when using the state-of-the-art fault-tolerant quantum error correcting codes, in particular, those for which implementing the T gate consumes vastly more resources than the other gates in the gate set. More specifically, in this paper we consider the group of unitaries that can be exactly implemented by a quantum circuit consisting of the Clifford + T gate set. The Clifford + T gate set is a universal gate set and in this group, using state-of-the-art surface codes, the T gate is by far the most expensive component to implement fault-tolerantly. So it is important to minimize the number of T gates necessary for a fault-tolerant implementation. Our primary interest is to compute a circuit for a given n -qubit unitary U , using the minimum possible number of T gates (called the T-count of unitary U ). We consider the problem COUNT-T, the optimization version of which aims to find the T-count of U . In its decision version the goal is to decide if the T-count is at most some positive integer m . Given an oracle for COUNT-T, we can compute a T-count-optimal circuit in time polynomial in the T-count and dimension of U . We give a provable classical algorithm that solves COUNT-T (decision) in time O N 2 ( c − 1 ) ⌈ m c ⌉ p o l y ( m , N ) and space O N 2 ⌈ m c ⌉ p o l y ( m , N ) , where N = 2 n and c ⩾ 2. This gives a space-time trade-off for solving this problem with variants of meet-in-the-middle techniques. We also introduce an asymptotically faster multiplication method that shaves a factor of N 0.7457 off of the overall complexity. Lastly, beyond our improvements to the rigorous algorithm, we give a heuristic algorithm that outputs a T-count-optimal circuit and has space and time complexity poly( m , N ), under some assumptions. In our heuristic algorithm we developed a novel way of pruning the search space. While our heuristic method still scales exponentially with the number of qubits (though with a lower exponent), there is a large improvement by going from exponential to polynomial scaling with m . We implemented our heuristic algorithm with up to 4 qubit unitaries and obtained a significant improvement in time. For all benchmark and random unitaries we studied, the T-count returned by our algorithm is at most the T-count of their circuits shown in previous papers.

arXiv:2006.12440•Quantum Science and Technology•Oct 7, 2021•34 citations
Suppose we want to implement a unitary U , for instance a circuit for some quantum algorithm. Suppose our actual implementation is a unitary U~ , which we can only apply as a black-box. In general it is an exponentially-hard task to decide whether U~ equals the intended U , or is significantly different in a worst-case norm. In this paper we consider two special cases where relatively efficient and lightweight procedures exist for this task.First, we give an efficient procedure under the assumption that U and U~ (both of which we can now apply as a black-box) are either equal, or differ significantly in only one k -qubit gate, where k=O(1) (the k qubits need not be contiguous). Second, we give an even more lightweight procedure under the assumption that U and U~ are Clifford circuits which are either equal, or different in arbitrary ways (the specification of U is now classically given while U~ can still only be applied as a black-box). Both procedures only need to run U~ a constant number of times to detect a constant error in a worst-case norm. We note that the Clifford result also follows from earlier work of Flammia and Liu, and da Silva, Landon-Cardinal, and Poulin.In the Clifford case, our error-detection procedure also allows us efficiently to learn (and hence correct) U~ if we have a small list of possible errors that could have happened to U ; for example if we know that only O(1) of the gates of U~ are wrong, this list will be polynomially small and we can test each possible erroneous version of U for equality with U~ .
We consider quantum circuits composed of Clifford and TTT gates. In this context the TTT gate has a special status since it confers universal computation when added to the (classically simulable) Clifford gates. However it can be very expensive to implement fault-tolerantly. We therefore view this gate as a resource which should be used only when necessary. Given an nnn-qubit unitary UUU we are interested in computing a circuit that implements it using the minimum possible number of TTT gates (called the TTT-count of UUU). A related task is to decide if the TTT-count of UUU is less than or equal to mmm; we consider this problem as a function of N=2nN=2^nN=2n and mmm. We provide a classical algorithm which solves it using time and space both upper bounded as O(Nmpoly(m,N))\mathcal{O}(N^m \text{poly}(m,N))O(Nmpoly(m,N)). We implemented our algorithm and used it to show that any Clifford+T circuit for the Toffoli or the Fredkin gate requires at least 7 TTT gates. This implies that the known 7 TTT gate circuits for these gates are TTT-optimal. We also provide a simple expression for the TTT-count of single-qubit unitaries.
We consider the problem of Clifford testing, which asks whether a black-box n-qubit unitary is a Clifford unitary or at least ε-far from every Clifford unitary. We give the first 4-query Clifford tester, which decides this problem with probability poly(ε). This contrasts with the minimum of 6 copies required for the closely-related task of stabilizer testing. We show that our tester is tolerant, by adapting techniques from tolerant stabilizer testing to our setting. In doing so, we settle in the positive a conjecture of Bu, Gu and Jaffe, by proving a polynomial inverse theorem for a non-commutative Gowers 3-uniformity norm. We also consider the restricted setting of single-copy access, where we give an O(n)-query Clifford tester that requires no auxiliary memory qubits or adaptivity. We complement this with a lower bound, proving that any such, potentially adaptive, single-copy algorithm needs at least Ω(n1/4) queries. To obtain our results, we leverage the structure of the commutant of the Clifford group, obtaining several technical statements that may be of independent interest.
Random Clifford operators have numerous applications in quantum computing, including randomized benchmarking, classical shadows, and quantum authentication. However, sampling and implementing uniformly random nnn-qubit Clifford incur near-quadratic complexity due to the size of Clifford group. We introduce a cryptographic way to overcome these barriers: trapdoored Clifford operator distributions whose samples are computationally indistinguishable from uniformly random Cliffords, yet implementing them can be much faster given the trapdoor. We construct a distribution of trapdoored Clifford operators whose elements can be sampled and implemented in near-linear time under a variant of the learning parity with noise assumption. Our constructions allow fast tableau action on Pauli labels for classical simulation, and also can be optimized to admit polylogarithmic-depth implementation. Along the way, we construct trapdoored matrices over finite fields that support efficient multiplication by both a matrix and its inverse, resolving an open question left by Vaikuntanathan and Zamir [SODA'26]. We use these constructions to obtain faster protocols based on random Cliffords. We also explore their applications to the worst-case to average-case reductions for matrix and Clifford problems including the iterated matrix multiplication and Clifford circuit synthesis. In particular, we show the hardness of batching Clifford circuits: synthesizing circuits that apply the same Clifford to multiple registers is at least as hard as worst-case matrix multiplication, even when synthesis succeeds on a small constant fraction of random Cliffords. This extends to approximate implementations by general quantum circuits.
We present two classical algorithms for the simulation of universal quantum circuits on n qubits constructed from c instances of Clifford gates and t arbitrary-angle Z-rotation gates such as T gates.Our algorithms complement each other by performing best in different parameter regimes.The ESTIMATE algorithm produces an additive precision estimate of the Born-rule probability of a chosen measurement outcome with the only source of run-time inefficiency being a linear dependence on the stabilizer extent (with scaling approximately equal to 1.17 t for T gates).Our algorithm is state of the art for this task: as an example, in approximately 13 h (on a standard desktop computer), we estimate the Born-rule probability to within an additive error of 0.03, for a 50-qubit, 60 non-Clifford gate quantum circuit with more than 2000 Clifford gates.Our second algorithm, COMPUTE, calculates the probability of a chosen measurement outcome to machine precision with run time O 2 t-r t , where r is an efficiently computable, circuit-specific quantity.With high probability, r is very close to min {t, n -w} for random circuits with many Clifford gates, where w is the number of measured qubits.COMPUTE can be effective in surprisingly challenging parameter regimes, e.g., we can randomly sample Clifford+T circuits with n = 55, w = 5, c = 10 5 , and t = 80 T gates, and then compute the Born-rule probability with a run time consistently less than 10 min using a single core of a standard desktop computer.We provide a C+Python implementation of our algorithms and benchmark them using random circuits, the hidden-shift algorithm, and the quantum approximate optimization algorithm.
Quantum circuit optimization is an indispensable component of the quantum software stack, used to reduce noise, maximize performance, alleviate costs of quantum error correction, or target specific hardware. A related problem is approximate membership: for a fixed set of unitaries SSS, decide whether a given circuit CCC is within distance ε\varepsilonε of a unitary in SSS under some metric mmm. Membership is a special case of optimization, where SSS is a set of unitaries implementable at no cost (e.g., with noise-minimal circuits, or without magic states). Janzing, Wocjan, and Beth (Int. J. Quantum Inf., 2005) showed that, for the operator metric, the case S={I}S=\{I\}S={I} (approximate identity) is QMA-complete when CCC is promised to be either close to the identity or far from it. We generalize this setting in three directions: (i) promise-free inputs, (ii) besides S={I}S=\{I\}S={I}, sets SSS containing only Clifford unitaries, or only generalized permutation matrices (i.e., no superposition), and (iii) the trace-based, spectral, and operator metrics. We show that, in all cases, approximate membership is PP-hard for wide ranges of ε\varepsilonε, provided CCC's gate-set can implement Clifford+T, as the gate-sets of standard hardware do. If S={I}S=\{I\}S={I}, or if SSS contains only generalized permutation matrices, I∈SI\in SI∈S, and mmm is a trace-based distance, PP-hardness holds for all non-trivial ε\varepsilonε. If S={I}S=\{I\}S={I} and mmm is a trace-based distance, PP-hardness holds even for circuits over classical-reversible gate-sets. Our results indicate that approximate membership is harder over promise-free inputs than the QMA-complete promise version, and that this hardness persists across quantum resources (any gates, non-Clifford, superposition) and distance metrics. They directly imply PP-hardness of circuit optimization when minimizing total, non-Clifford, or superposition gate depth or count.
Abstract An important part of reaping computational advantage from a quantum computer is to reduce the quantum resources needed to implement a desired quantum algorithm. Quantum algorithms that are too large to be practical on noisy intermediate scale quantum devices will require fault-tolerant error correction. This work focuses on reducing the physical cost of implementing quantum algorithms when using the state-of-the-art fault-tolerant quantum error correcting codes, in particular, those for which implementing the T gate consumes vastly more resources than the other gates in the gate set. More specifically, in this paper we consider the group of unitaries that can be exactly implemented by a quantum circuit consisting of the Clifford + T gate set. The Clifford + T gate set is a universal gate set and in this group, using state-of-the-art surface codes, the T gate is by far the most expensive component to implement fault-tolerantly. So it is important to minimize the number of T gates necessary for a fault-tolerant implementation. Our primary interest is to compute a circuit for a given n -qubit unitary U , using the minimum possible number of T gates (called the T-count of unitary U ). We consider the problem COUNT-T, the optimization version of which aims to find the T-count of U . In its decision version the goal is to decide if the T-count is at most some positive integer m . Given an oracle for COUNT-T, we can compute a T-count-optimal circuit in time polynomial in the T-count and dimension of U . We give a provable classical algorithm that solves COUNT-T (decision) in time O N 2 ( c − 1 ) ⌈ m c ⌉ p o l y ( m , N ) and space O N 2 ⌈ m c ⌉ p o l y ( m , N ) , where N = 2 n and c ⩾ 2. This gives a space-time trade-off for solving this problem with variants of meet-in-the-middle techniques. We also introduce an asymptotically faster multiplication method that shaves a factor of N 0.7457 off of the overall complexity. Lastly, beyond our improvements to the rigorous algorithm, we give a heuristic algorithm that outputs a T-count-optimal circuit and has space and time complexity poly( m , N ), under some assumptions. In our heuristic algorithm we developed a novel way of pruning the search space. While our heuristic method still scales exponentially with the number of qubits (though with a lower exponent), there is a large improvement by going from exponential to polynomial scaling with m . We implemented our heuristic algorithm with up to 4 qubit unitaries and obtained a significant improvement in time. For all benchmark and random unitaries we studied, the T-count returned by our algorithm is at most the T-count of their circuits shown in previous papers.