Challenges
Datasets
Workspaces
Papers
Discussions
Leaderboard
Log inSign up
Challenges
Datasets
Workspaces
Papers
Discussions
Leaderboard
Blog
Job Board
Q3AS

© 2026 Aqora Quantum S.A.S.

TermsPrivacyLegal Notice

arXiv:2009.03291 · Physical Review Research

Transconductance quantization in a topological Josephson tunnel junction circuit

Léo Peyruchat, J. Griesmar, Jean-Damien Pillet, Çağlar Girit

Published Mar 29, 2021• 47 citations
arXivHTMLPDF

Abstract

Superconducting circuits incorporating Josephson tunnel junctions are widely used for fundamental research as well as for applications in fields such as quantum information and magnetometry.The quantum coherent nature of Josephson junctions makes them especially suitable for metrology applications.Josephson junctions suffice to form two sides of the quantum metrology triangle, relating frequency to either voltage or current, but not its base, which directly links voltage to current.We propose a five Josephson tunnel junction circuit in which simultaneous pumping of flux and charge results in quantized transconductance in units 4e 2 /h = 2e/ 0 , the ratio between the Cooper pair charge and the flux quantum.The Josephson quantized Hall conductance device (JHD) is explained in terms of intertwined Cooper pair pumps driven by the AC Josephson effect.We describe an experimental implementation of the device and discuss the optimal configuration of external parameters and possible sources of error.The JHD has a rich topological structure and demonstrates that Josephson tunnel junctions are universal, capable of interrelating frequency, voltage, and current via fundamental constants.

DOI
10.1103/physrevresearch.3.013289

Related papers

Josephson junctions in charge and phase picture Theory and applications

Juha Hassel

Properties of weak links between two superconductors, or Josephson junctions, make them interesting for fundamental physics research. Since their discovery over four decades ago, they have provided a unique way to study the behavior of the superconducting quantum phase. More recently, ultra small, or mesoscopic, Josephson junctions with substantial single Cooper pair charging energy have gained interest due to their behavior as macroscopic quantum objects. In addition to the theoretical interest, Josephson junctions can be used as active elements in circuit applications. Particularly, in this Thesis we study two different devices. We develop the required theoretical treatments, derive device properties, and compare the results with experimental data. The first application is a Josephson voltage standard based on externally damped Superconductor - Insulator - Superconductor junctions. It consists of an array of large Josephson junctions connected in series and irradiated with a 70 GHz microwave signal. Phase locking the Josephson dynamics into the signal leads to the quantization of the voltage. This is utilized in metrology. We introduce a new circuit solution based on frequency dependent damping of the junctions. Optimization and some designs for practical arrays are presented. The purpose is to find such a design that the array is fast, has low power consumption and is as stable as possible. Arrays able to generate DC voltages of order 1 volt with metrological accuracy are demonstrated experimentally and their applicability in AC voltage calibrations is analyzed. The second application is the Bloch Oscillating Transistor (BOT). The BOT is based on controlling the Cooper pair current in an ultra small Josephson junction by means of quasiparticles tunneling through a normal junction. As part of the thesis work, the principle of operation is first demonstrated computationally. The model is then refined to yield quantitative predictions of the characteristics. Finally, an analytic theory for the device is developed and the properties as an amplifier are derived.

•Nov 9, 2004•0 citations

Single flux transistor: The controllable interplay of coherent quantum phase slip and flux quantization

Sergey G. Kafanov, N. M. Chtchelkatchev

The single Cooper pair josephson transistor is a device that exhibits at the same time charge quantization and phase coherence. Coherent quantum phase slip phenomenon is “dual” the Josephson phase coherence, while the charge quantization is dual to the flux quantization. We present the experimental demonstration and the theoretical description of a new superconducting device–single flux transistor, which is dual to the single Cooper pair transistor. Our transport measurements show the periodic modulation of the critical voltage by the external magnetic field. The obtained current-voltage characteristics show the hysteretic behavior, which we attribute to the intrinsic self-heating of charge carriers.

arXiv:1406.0679•Journal of Applied Physics•Aug 21, 2013•10 citations

Feasibility of the Josephson voltage and current standards on a single chip

Rais S. Shaikhaidarov, Ilya Antonov, Kyung Ho Kim +5 more

The quantum Josephson voltage standard is well established across the metrology community for many years. It relies on the synchronization of the flux tunneling in the S/I/S Josephson junctions (JJ) with the microwave radiation (MW) of frequency f such that V=Φ0fm, where m = 0, 1, 2, …. The phenomenon is called the Shapiro steps. Together with the quantum Hall resistance standard, the voltage standard forms the foundation of electrostatic metrology. The current is then defined as the ratio of the voltage and resistance. Realization of the quantum current standard would close the electrostatic metrological triangle of voltage–resistance–current. The current quantization I=2efm, the inverse Shapiro steps, was recently shown using the superconducting nanowires and small JJ. The effect is a synchronization of the MW with the Cooper pair tunneling. This paves the way to combine the JJ voltage and current standards on the same chip and demonstrate feasibility of the multi-standard operation. We show the voltage and current quantization on the same chip up to frequency of 10 GHz, corresponding to the amplitudes ∼ 20.67 μV and ∼ 3.2 nA, respectively. The accuracy of the voltage and current quantization, however, is relatively low, 35 and 100 ppk, respectively. We discuss measures to optimize the JJs, circuit, and environment to boost the amplitude and accuracy of the standards.

arXiv:2410.11018•Applied Physics Letters•Sep 16, 2024•7 citations

Dual Shapiro steps and fundamental transconductance in the dc-driven Bloch transistor

A. B. Zorin

We propose a superconducting circuit based on the Bloch transistor, a quantum device consisting of two small-capacitance Josephson junctions, connected in series and having a small superconducting island in between. This device is driven by two dc electrical sources controlling Josephson oscillations of frequency $f_J = 2e\overline{V_J}/h$, related to the average transistor voltage $\overline{V_J}$, and Bloch oscillations of frequency $f_B = \overline{I_B}/2e$, related to the average current $\overline{I_B}$ injected into the transistor island. We show that due to the Bloch transistor properties, these two types of oscillations are coupled and can mutually phase-lock, i.e., $f_J = f_B$. This leads to the formation of a current step on the current-voltage curve at $\overline{I_B} = 2ef_J$, which is similar to the dual Shapiro step, appearing under microwave irradiation of frequency $f$ on the current-voltage curve of a small Josephson Junction at current $I=2ef$. Moreover, the Bloch transistor transconductance $\overline{I_B}/\overline{V_J}$ takes the fundamental value of $1/R_Q$, where $R_Q = h/4e^2$ is the resistance quantum. The obtained results pave the way to an alternative quantum standard of resistance, based on the superconducting circuit and operating without applying a strong magnetic field.

cond-mat.supr-conCross-listedarXiv:2605.14080•Physical review. B./Physical review. B•May 15, 2026•0 citations

Tunnel junction devices for quantum metrology

A. Kemppinen

This Thesis studies opportunities to create a quantum standard for the electric current with the help of tunnel junctions. We use two types of tunnel junctions: superconducting Josephson junctions, and NIS junctions where one of the electrodes is normal (N) and the other one superconducting (S). In both cases, tunnel junctions are employed in a single-electron transistor (SET) structure, which is used to transfer a controlled number k of electrons (e) with the repetition frequency f. The magnitude of the resulting current is thus I = kef. First, we study the Cooper pair sluice, where Josephson junctions are connected as two superconducting quantum interference devices (SQUID). A gate electrode is used to control the charge state of the superconducting island formed between the SQUIDs. The sluice is based on tuning the tunneling rates through the SQUIDs with local magnetic fluxes, which allows to control the direction of the charge transfer. Weak traces of current quantization can be observed up to above 1 nA, which is large enough current for many metrological purposes. However, the accuracy of the current is still far from what is required in metrology. We study also a new type of SQUID structure, the balanced SQUID, which could be used to improve the accuracy of the sluice or in, e.g., some quantum computing applications. Second, we employ NIS junctions in the hybrid (SINIS) single-electron transistor with superconducting leads and a normal-metal island. This structure can be used as the SINIS turnstile which lets electrons to flow one by one in the direction determined by the bias voltage. We report the first experimental results on the SINIS turnstile and two methods to improve the accuracy of the current: increasing the charging energy of the island or connecting the turnstile in a resistive environment. We also show that the SINIS turnstile can be used as an electronic radio-frequency refrigerator where tunneling processes cool the electron temperature of the normal-metal island.

•Jan 1, 2009•0 citations

Mesoscopic superconducting tunnel junction devices : experimental studies of performance limitations

Jani M. Kivioja

In this work four different mesoscopic superconducting devices have been experimentally studied: an ammeter based on a hysteretic Josephson junction switching from the superconducting state to the normal state, a conventional Cooper pair pump (CPP) based on two superconducting islands separated by tunnel junctions, a novel flux assisted Cooper pair pump and a thermometer based on a tunnel junction between a superconductor and a normal metal. These devices make use of phenomena related to superconductivity and are also benefiting from some properties of small structures, e.g., of quantum mechanical tunneling and of transport of single electrons. The present research focused on investigating performance limitations of these devices and the aim was to improve their performance. A hysteretic Josephson junction switching can be used as a sensitive current threshold detector. For many purposes, a smaller critical current Ic of the detecting junction would yield a higher current sensitivity. It was found in this Thesis that the main limitation of the ammeter is that with increasing sensitivity the negative effects due to dissipation start to dominate. In this Thesis the Josephson junction was also demonstrated as a shot-noise detector, and it was concluded that this kind of a device could probably be made into an absolute on-chip detector of Fano-factors and noise in general. A charge pump is a device which can periodically transfer a discrete amount of charge Q through an electrical circuit. The measured double island CPP introduced a frequency dependent current with a value close to the expected one at low pumping frequencies. The drawback in the measurements was that the direction of the pumped current was set by the bias voltage. The results of the measurement on flux assisted pumping were indeed very promising and the studied device was able to produce sufficiently high pumped currents of around 0.1 nA with reasonable accuracy. Thermometer based on NIS (Normal metal - Insulator - Superconductor) tunnel junctions is a very promising temperature sensor for bolometric radiation sensor applications. This work showed that it can be used as a sensitive thermometer up to MHz frequencies range and that its response time is limited by the electron-phonon scattering rate.

•Jun 9, 2005•0 citations
Superconducting circuits incorporating Josephson tunnel junctions are widely used for fundamental research as well as for applications in fields such as quantum information and magnetometry.The quantum coherent nature of Josephson junctions makes them especially suitable for metrology applications.Josephson junctions suffice to form two sides of the quantum metrology triangle, relating frequency to either voltage or current, but not its base, which directly links voltage to current.We propose a five Josephson tunnel junction circuit in which simultaneous pumping of flux and charge results in quantized transconductance in units 4e 2 /h = 2e/ 0 , the ratio between the Cooper pair charge and the flux quantum.The Josephson quantized Hall conductance device (JHD) is explained in terms of intertwined Cooper pair pumps driven by the AC Josephson effect.We describe an experimental implementation of the device and discuss the optimal configuration of external parameters and possible sources of error.The JHD has a rich topological structure and demonstrates that Josephson tunnel junctions are universal, capable of interrelating frequency, voltage, and current via fundamental constants.
Properties of weak links between two superconductors, or Josephson junctions, make them interesting for fundamental physics research. Since their discovery over four decades ago, they have provided a unique way to study the behavior of the superconducting quantum phase. More recently, ultra small, or mesoscopic, Josephson junctions with substantial single Cooper pair charging energy have gained interest due to their behavior as macroscopic quantum objects. In addition to the theoretical interest, Josephson junctions can be used as active elements in circuit applications. Particularly, in this Thesis we study two different devices. We develop the required theoretical treatments, derive device properties, and compare the results with experimental data. The first application is a Josephson voltage standard based on externally damped Superconductor - Insulator - Superconductor junctions. It consists of an array of large Josephson junctions connected in series and irradiated with a 70 GHz microwave signal. Phase locking the Josephson dynamics into the signal leads to the quantization of the voltage. This is utilized in metrology. We introduce a new circuit solution based on frequency dependent damping of the junctions. Optimization and some designs for practical arrays are presented. The purpose is to find such a design that the array is fast, has low power consumption and is as stable as possible. Arrays able to generate DC voltages of order 1 volt with metrological accuracy are demonstrated experimentally and their applicability in AC voltage calibrations is analyzed. The second application is the Bloch Oscillating Transistor (BOT). The BOT is based on controlling the Cooper pair current in an ultra small Josephson junction by means of quasiparticles tunneling through a normal junction. As part of the thesis work, the principle of operation is first demonstrated computationally. The model is then refined to yield quantitative predictions of the characteristics. Finally, an analytic theory for the device is developed and the properties as an amplifier are derived.
The single Cooper pair josephson transistor is a device that exhibits at the same time charge quantization and phase coherence. Coherent quantum phase slip phenomenon is “dual” the Josephson phase coherence, while the charge quantization is dual to the flux quantization. We present the experimental demonstration and the theoretical description of a new superconducting device–single flux transistor, which is dual to the single Cooper pair transistor. Our transport measurements show the periodic modulation of the critical voltage by the external magnetic field. The obtained current-voltage characteristics show the hysteretic behavior, which we attribute to the intrinsic self-heating of charge carriers.
The quantum Josephson voltage standard is well established across the metrology community for many years. It relies on the synchronization of the flux tunneling in the S/I/S Josephson junctions (JJ) with the microwave radiation (MW) of frequency f such that V=Φ0fm, where m = 0, 1, 2, …. The phenomenon is called the Shapiro steps. Together with the quantum Hall resistance standard, the voltage standard forms the foundation of electrostatic metrology. The current is then defined as the ratio of the voltage and resistance. Realization of the quantum current standard would close the electrostatic metrological triangle of voltage–resistance–current. The current quantization I=2efm, the inverse Shapiro steps, was recently shown using the superconducting nanowires and small JJ. The effect is a synchronization of the MW with the Cooper pair tunneling. This paves the way to combine the JJ voltage and current standards on the same chip and demonstrate feasibility of the multi-standard operation. We show the voltage and current quantization on the same chip up to frequency of 10 GHz, corresponding to the amplitudes ∼ 20.67 μV and ∼ 3.2 nA, respectively. The accuracy of the voltage and current quantization, however, is relatively low, 35 and 100 ppk, respectively. We discuss measures to optimize the JJs, circuit, and environment to boost the amplitude and accuracy of the standards.
We propose a superconducting circuit based on the Bloch transistor, a quantum device consisting of two small-capacitance Josephson junctions, connected in series and having a small superconducting island in between. This device is driven by two dc electrical sources controlling Josephson oscillations of frequency fJ=2eVJ‾/hf_J = 2e\overline{V_J}/hfJ​=2eVJ​​/h, related to the average transistor voltage VJ‾\overline{V_J}VJ​​, and Bloch oscillations of frequency fB=IB‾/2ef_B = \overline{I_B}/2efB​=IB​​/2e, related to the average current IB‾\overline{I_B}IB​​ injected into the transistor island. We show that due to the Bloch transistor properties, these two types of oscillations are coupled and can mutually phase-lock, i.e., fJ=fBf_J = f_BfJ​=fB​. This leads to the formation of a current step on the current-voltage curve at IB‾=2efJ\overline{I_B} = 2ef_JIB​​=2efJ​, which is similar to the dual Shapiro step, appearing under microwave irradiation of frequency fff on the current-voltage curve of a small Josephson Junction at current I=2efI=2efI=2ef. Moreover, the Bloch transistor transconductance IB‾/VJ‾\overline{I_B}/\overline{V_J}IB​​/VJ​​ takes the fundamental value of 1/RQ1/R_Q1/RQ​, where RQ=h/4e2R_Q = h/4e^2RQ​=h/4e2 is the resistance quantum. The obtained results pave the way to an alternative quantum standard of resistance, based on the superconducting circuit and operating without applying a strong magnetic field.
This Thesis studies opportunities to create a quantum standard for the electric current with the help of tunnel junctions. We use two types of tunnel junctions: superconducting Josephson junctions, and NIS junctions where one of the electrodes is normal (N) and the other one superconducting (S). In both cases, tunnel junctions are employed in a single-electron transistor (SET) structure, which is used to transfer a controlled number k of electrons (e) with the repetition frequency f. The magnitude of the resulting current is thus I = kef. First, we study the Cooper pair sluice, where Josephson junctions are connected as two superconducting quantum interference devices (SQUID). A gate electrode is used to control the charge state of the superconducting island formed between the SQUIDs. The sluice is based on tuning the tunneling rates through the SQUIDs with local magnetic fluxes, which allows to control the direction of the charge transfer. Weak traces of current quantization can be observed up to above 1 nA, which is large enough current for many metrological purposes. However, the accuracy of the current is still far from what is required in metrology. We study also a new type of SQUID structure, the balanced SQUID, which could be used to improve the accuracy of the sluice or in, e.g., some quantum computing applications. Second, we employ NIS junctions in the hybrid (SINIS) single-electron transistor with superconducting leads and a normal-metal island. This structure can be used as the SINIS turnstile which lets electrons to flow one by one in the direction determined by the bias voltage. We report the first experimental results on the SINIS turnstile and two methods to improve the accuracy of the current: increasing the charging energy of the island or connecting the turnstile in a resistive environment. We also show that the SINIS turnstile can be used as an electronic radio-frequency refrigerator where tunneling processes cool the electron temperature of the normal-metal island.
In this work four different mesoscopic superconducting devices have been experimentally studied: an ammeter based on a hysteretic Josephson junction switching from the superconducting state to the normal state, a conventional Cooper pair pump (CPP) based on two superconducting islands separated by tunnel junctions, a novel flux assisted Cooper pair pump and a thermometer based on a tunnel junction between a superconductor and a normal metal. These devices make use of phenomena related to superconductivity and are also benefiting from some properties of small structures, e.g., of quantum mechanical tunneling and of transport of single electrons. The present research focused on investigating performance limitations of these devices and the aim was to improve their performance. A hysteretic Josephson junction switching can be used as a sensitive current threshold detector. For many purposes, a smaller critical current Ic of the detecting junction would yield a higher current sensitivity. It was found in this Thesis that the main limitation of the ammeter is that with increasing sensitivity the negative effects due to dissipation start to dominate. In this Thesis the Josephson junction was also demonstrated as a shot-noise detector, and it was concluded that this kind of a device could probably be made into an absolute on-chip detector of Fano-factors and noise in general. A charge pump is a device which can periodically transfer a discrete amount of charge Q through an electrical circuit. The measured double island CPP introduced a frequency dependent current with a value close to the expected one at low pumping frequencies. The drawback in the measurements was that the direction of the pumped current was set by the bias voltage. The results of the measurement on flux assisted pumping were indeed very promising and the studied device was able to produce sufficiently high pumped currents of around 0.1 nA with reasonable accuracy. Thermometer based on NIS (Normal metal - Insulator - Superconductor) tunnel junctions is a very promising temperature sensor for bolometric radiation sensor applications. This work showed that it can be used as a sensitive thermometer up to MHz frequencies range and that its response time is limited by the electron-phonon scattering rate.