Challenges
Datasets
Workspaces
Papers
Discussions
Leaderboard
Log inSign up
Challenges
Datasets
Workspaces
Papers
Discussions
Leaderboard
Blog
Job Board
Q3AS

© 2026 Aqora Quantum S.A.S.

TermsPrivacyLegal Notice

arXiv:2009.02382 · Physical Review Research

Scalable multiphoton generation from cavity-synchronized single-photon sources

Ming Li, Juan José García‐Ripoll, Tomás Ramos

Published Sep 13, 2024• 4 citations
arXivHTMLPDF

Abstract

We propose an efficient, scalable, and deterministic scheme to generate multiple indistinguishable photons over independent channels, on demand. Our design relies on multiple single-photon sources, each coupled to a waveguide, all interacting with a common cavity mode. The cavity synchronizes and triggers the simultaneous emission of one photon by each source, which are collected by the waveguides. In a state-of-the-art circuit QED implementation, this scheme supports the creation of single photons with 99 % purity, indistinguishability, and efficiency at rates of ∼ MHz . We also discuss conditions to produce up to 100 photons simultaneously with generation rates of hundreds of kHz. This is orders of magnitude more efficient than previous demultiplexed sources for boson sampling and enables the realization of deterministic multiphoton sources and scalable quantum information processing with photons. Published by the American Physical Society 2024

DOI
10.1103/physrevresearch.6.033295

Related papers

Scalable integrated single-photon source

Ravitej Uppu, Freja T. Pedersen, Ying Wang +8 more

Photonic qubits are key enablers for quantum information processing deployable across a distributed quantum network. An on-demand and truly scalable source of indistinguishable single photons is the essential component enabling high-fidelity photonic quantum operations. A main challenge is to overcome noise and decoherence processes to reach the steep benchmarks on generation efficiency and photon indistinguishability required for scaling up the source. We report on the realization of a deterministic single-photon source featuring near-unity indistinguishability using a quantum dot in an "on-chip" planar nanophotonic waveguide circuit. The device produces long strings of >100 single photons without any observable decrease in the mutual indistinguishability between photons. A total generation rate of 122 million photons per second is achieved, corresponding to an on-chip source efficiency of 84%. These specifications of the single-photon source are benchmarked for boson sampling and found to enable scaling into the regime of quantum advantage.

arXiv:2003.08919•Science Advances•Dec 9, 2020•343 citations

Highly efficient sources of single indistinguishable photons

Niels Gregersen

Solid-state sources capable of emitting single photons on demand are of great interest in quantum information applications. Ideally, such a source should emit exactly one photon into the collection optics per trigger, the emitted photons should be indistinguishable and the source should be electrically driven. Several design strategies addressing these requirements have been proposed. In the cavity-based source, light emission is controlled using resonant cavity quantum electrodynamics effects, whereas in the waveguide-based source, broadband electric field screening effects are employed to direct the light emission into the optical mode of interest. For all the strategies, accurate modeling and careful optical engineering is required to achieve high performance.

International Conference on Numerical Simulation of Optoelectronic Devices (NUSOD)•Aug 1, 2013•0 citations

On-Demand Semiconductor Source of Entangled Photons Which Simultaneously Has High Fidelity, Efficiency, and Indistinguishability

Hui Wang, Hai Rong Hu, Tung-Hsun Chung +13 more

An outstanding goal in quantum optics and scalable photonic quantum technology is to develop a source that each time emits one and only one entangled photon pair with simultaneously high entanglement fidelity, extraction efficiency, and photon indistinguishability. By coherent two-photon excitation of a single InGaAs quantum dot coupled to a circular Bragg grating bull's-eye cavity with a broadband high Purcell factor of up to 11.3, we generate entangled photon pairs with a state fidelity of 0.90(1), pair generation rate of 0.59(1), pair extraction efficiency of 0.62(6), and photon indistinguishability of 0.90(1) simultaneously. Our work will open up many applications in high-efficiency multiphoton experiments and solid-state quantum repeaters.

arXiv:1903.06071•Physical Review Letters•Mar 22, 2019•344 citations

Generation of "triggered single photons" from a coherently-pumped quantum dot

Pradyumna K. Pathak, Stephen Hughes

A deterministic "on demand" source of single photons is a basic building block for linear quantum computation \cite{linear}, quantum cryptography \cite{crypto}, quantum teleportation \cite{teleport}, and quantum networks \cite{network}. In all these applications, quantum interference between two single-photon pulses on a symmetric beam splitter has been exploited \cite{review}, which imposes stringent requirement for the implemented single photons to be indistinguishable in all degrees of freedom, including their frequencies, spectral widths, pulse shapes, and polarizations. To generate single photons one requires a pumping mechanism to excite a "two-level emitter" and an efficient channeling of the subsequently emitted photons. The efficiency of the source can be enhanced by coupling the emitter to the waveguide \cite{manga} or a microcavity mode \cite{cklaw}. However, hitherto the solid-state single photon sources realized by using a quantum dot coupled with a microcavity rely on incoherent pumping of excitons, which leads to problems with timing jitter \cite{kiraz}, leading to a trade off between efficiency and indistinguishability. Here we introduce a means to realize a highly efficient solid state source of indistinguishable single photons using cavity-assisted adiabatic Raman passage in a single quantum dot - cavity system. We demonstrate pulse-triggered single photons with 100% efficiency and $>90$% indistinguishability using currently available experimental parameters.

arXiv:0911.5673•Nov 30, 2009•0 citations

Modeling and Design of High-Efficiency Single-Photon Sources

Niels Gregersen, Per Kaer, Jesper Mørk

Solid-state sources capable of emitting single photons on demand are of great interest in quantum information applications. Ideally, such a source should emit exactly one photon into the collection optics per trigger, the emitted photons should be indistinguishable, and the source should be electrically driven. Several design strategies addressing these requirements have been proposed. In the cavity-based source, light emission is controlled using resonant cavity quantum electrodynamics effects, whereas in the waveguide-based source, broadband electric field screening effects are employed to direct the light emission into the optical mode of interest. For all the strategies, accurate modeling and careful optical engineering is required to achieve high performance. In this study, we discuss the models and numerical techniques used to analyze such structures. The physical effects governing the light emission profile and the possibilities of tailoring it as well as the mechanisms governing the coherence are elucidated. The major design strategies pursued to optimize the single-photon source performance and the remaining challenges are reviewed.

IEEE Journal of Selected Topics in Quantum Electronics•Apr 3, 2013•44 citations

Efficient generation of entangled multiphoton graph states from a single atom

Philip Thomas, Leonardo Ruscio, Olivier Morin +1 more

Abstract The central technological appeal of quantum science resides in exploiting quantum effects, such as entanglement, for a variety of applications, including computing, communication and sensing 1 . The overarching challenge in these fields is to address, control and protect systems of many qubits against decoherence 2 . Against this backdrop, optical photons, naturally robust and easy to manipulate, represent ideal qubit carriers. However, the most successful technique so far for creating photonic entanglement 3 is inherently probabilistic and, therefore, subject to severe scalability limitations. Here we report the implementation of a deterministic protocol 4–6 for the creation of photonic entanglement with a single memory atom in a cavity 7 . We interleave controlled single-photon emissions with tailored atomic qubit rotations to efficiently grow Greenberger–Horne–Zeilinger (GHZ) states 8 of up to 14 photons and linear cluster states 9 of up to 12 photons with a fidelity lower bounded by 76(6)% and 56(4)%, respectively. Thanks to a source-to-detection efficiency of 43.18(7)% per photon, we measure these large states about once every minute, which is orders of magnitude faster than in any previous experiment 3,10–13 . In the future, this rate could be increased even further, the scheme could be extended to two atoms in a cavity 14,15 or several sources could be quantum mechanically coupled 16 , to generate higher-dimensional cluster states 17 . Overcoming the limitations encountered by probabilistic schemes for photonic entanglement generation, our results may offer a way towards scalable measurement-based quantum computation 18,19 and communication 20,21 .

arXiv:2205.12736•Nature•Aug 24, 2022•242 citations
We propose an efficient, scalable, and deterministic scheme to generate multiple indistinguishable photons over independent channels, on demand. Our design relies on multiple single-photon sources, each coupled to a waveguide, all interacting with a common cavity mode. The cavity synchronizes and triggers the simultaneous emission of one photon by each source, which are collected by the waveguides. In a state-of-the-art circuit QED implementation, this scheme supports the creation of single photons with 99 % purity, indistinguishability, and efficiency at rates of ∼ MHz . We also discuss conditions to produce up to 100 photons simultaneously with generation rates of hundreds of kHz. This is orders of magnitude more efficient than previous demultiplexed sources for boson sampling and enables the realization of deterministic multiphoton sources and scalable quantum information processing with photons. Published by the American Physical Society 2024
Photonic qubits are key enablers for quantum information processing deployable across a distributed quantum network. An on-demand and truly scalable source of indistinguishable single photons is the essential component enabling high-fidelity photonic quantum operations. A main challenge is to overcome noise and decoherence processes to reach the steep benchmarks on generation efficiency and photon indistinguishability required for scaling up the source. We report on the realization of a deterministic single-photon source featuring near-unity indistinguishability using a quantum dot in an "on-chip" planar nanophotonic waveguide circuit. The device produces long strings of >100 single photons without any observable decrease in the mutual indistinguishability between photons. A total generation rate of 122 million photons per second is achieved, corresponding to an on-chip source efficiency of 84%. These specifications of the single-photon source are benchmarked for boson sampling and found to enable scaling into the regime of quantum advantage.
Solid-state sources capable of emitting single photons on demand are of great interest in quantum information applications. Ideally, such a source should emit exactly one photon into the collection optics per trigger, the emitted photons should be indistinguishable and the source should be electrically driven. Several design strategies addressing these requirements have been proposed. In the cavity-based source, light emission is controlled using resonant cavity quantum electrodynamics effects, whereas in the waveguide-based source, broadband electric field screening effects are employed to direct the light emission into the optical mode of interest. For all the strategies, accurate modeling and careful optical engineering is required to achieve high performance.
An outstanding goal in quantum optics and scalable photonic quantum technology is to develop a source that each time emits one and only one entangled photon pair with simultaneously high entanglement fidelity, extraction efficiency, and photon indistinguishability. By coherent two-photon excitation of a single InGaAs quantum dot coupled to a circular Bragg grating bull's-eye cavity with a broadband high Purcell factor of up to 11.3, we generate entangled photon pairs with a state fidelity of 0.90(1), pair generation rate of 0.59(1), pair extraction efficiency of 0.62(6), and photon indistinguishability of 0.90(1) simultaneously. Our work will open up many applications in high-efficiency multiphoton experiments and solid-state quantum repeaters.
A deterministic "on demand" source of single photons is a basic building block for linear quantum computation \cite{linear}, quantum cryptography \cite{crypto}, quantum teleportation \cite{teleport}, and quantum networks \cite{network}. In all these applications, quantum interference between two single-photon pulses on a symmetric beam splitter has been exploited \cite{review}, which imposes stringent requirement for the implemented single photons to be indistinguishable in all degrees of freedom, including their frequencies, spectral widths, pulse shapes, and polarizations. To generate single photons one requires a pumping mechanism to excite a "two-level emitter" and an efficient channeling of the subsequently emitted photons. The efficiency of the source can be enhanced by coupling the emitter to the waveguide \cite{manga} or a microcavity mode \cite{cklaw}. However, hitherto the solid-state single photon sources realized by using a quantum dot coupled with a microcavity rely on incoherent pumping of excitons, which leads to problems with timing jitter \cite{kiraz}, leading to a trade off between efficiency and indistinguishability. Here we introduce a means to realize a highly efficient solid state source of indistinguishable single photons using cavity-assisted adiabatic Raman passage in a single quantum dot - cavity system. We demonstrate pulse-triggered single photons with 100% efficiency and >90>90>90% indistinguishability using currently available experimental parameters.
Solid-state sources capable of emitting single photons on demand are of great interest in quantum information applications. Ideally, such a source should emit exactly one photon into the collection optics per trigger, the emitted photons should be indistinguishable, and the source should be electrically driven. Several design strategies addressing these requirements have been proposed. In the cavity-based source, light emission is controlled using resonant cavity quantum electrodynamics effects, whereas in the waveguide-based source, broadband electric field screening effects are employed to direct the light emission into the optical mode of interest. For all the strategies, accurate modeling and careful optical engineering is required to achieve high performance. In this study, we discuss the models and numerical techniques used to analyze such structures. The physical effects governing the light emission profile and the possibilities of tailoring it as well as the mechanisms governing the coherence are elucidated. The major design strategies pursued to optimize the single-photon source performance and the remaining challenges are reviewed.
Abstract The central technological appeal of quantum science resides in exploiting quantum effects, such as entanglement, for a variety of applications, including computing, communication and sensing 1 . The overarching challenge in these fields is to address, control and protect systems of many qubits against decoherence 2 . Against this backdrop, optical photons, naturally robust and easy to manipulate, represent ideal qubit carriers. However, the most successful technique so far for creating photonic entanglement 3 is inherently probabilistic and, therefore, subject to severe scalability limitations. Here we report the implementation of a deterministic protocol 4–6 for the creation of photonic entanglement with a single memory atom in a cavity 7 . We interleave controlled single-photon emissions with tailored atomic qubit rotations to efficiently grow Greenberger–Horne–Zeilinger (GHZ) states 8 of up to 14 photons and linear cluster states 9 of up to 12 photons with a fidelity lower bounded by 76(6)% and 56(4)%, respectively. Thanks to a source-to-detection efficiency of 43.18(7)% per photon, we measure these large states about once every minute, which is orders of magnitude faster than in any previous experiment 3,10–13 . In the future, this rate could be increased even further, the scheme could be extended to two atoms in a cavity 14,15 or several sources could be quantum mechanically coupled 16 , to generate higher-dimensional cluster states 17 . Overcoming the limitations encountered by probabilistic schemes for photonic entanglement generation, our results may offer a way towards scalable measurement-based quantum computation 18,19 and communication 20,21 .