Challenges
Datasets
Workspaces
Papers
Discussions
Leaderboard
Log inSign up
Challenges
Datasets
Workspaces
Papers
Discussions
Leaderboard
Blog
Job Board
Q3AS

© 2026 Aqora Quantum S.A.S.

TermsPrivacyLegal Notice

arXiv:2008.05051

Short Shor-style syndrome sequences

Nicolas Delfosse, Ben W. Reichardt

Published Aug 12, 2020• 37 citations
arXivHTMLPDF

Abstract

We optimize fault-tolerant quantum error correction to reduce the number of syndrome bit measurements. Speeding up error correction will also speed up an encoded quantum computation, and should reduce its effective error rate. We give both code-specific and general methods, using a variety of techniques and in a variety of settings. We design new quantum error-correcting codes specifically for efficient error correction, e.g., allowing single-shot error correction. For codes with multiple logical qubits, we give methods for combining error correction with partial logical measurements. There are tradeoffs in choosing a code and error-correction technique. While to date most work has concentrated on optimizing the syndrome-extraction procedure, we show that there are also substantial benefits to optimizing how the measured syndromes are chosen and used. As an example, we design single-shot measurement sequences for fault-tolerant quantum error correction with the 16-qubit extended Hamming code. Our scheme uses 10 syndrome bit measurements, compared to 40 measurements with the Shor scheme. We design single-shot logical measurements as well: any logical Z measurement can be made together with fault-tolerant error correction using only 11 measurements. For comparison, using the Shor scheme a basic implementation of such a non-destructive logical measurement uses 63 measurements. We also offer ten open problems, the solutions of which could lead to substantial improvements of fault-tolerant error correction.

DOI
10.48550/arxiv.2008.05051

Related papers

Fault-Tolerant Quantum Error Correction: Implementing Hamming-Based Codes with Advanced Syndrome Extraction Techniques

Soham Bhadra, Diyansha Singh, Angana Chowdhury

Building reliable quantum computers requires protecting fragile quantum states from inevitable environmental noise and operational errors. While quantum error correction codes like the Steane $[\![7,1,3]\!]$ code provide elegant theoretical solutions, their practical success hinges critically on how we measure errors - a process called syndrome extraction. The challenge lies in the ancilla qubits used for measurement: when they fail, errors can cascade across the entire quantum system, destroying the very information we're trying to protect. We address this fundamental problem by implementing and comparing three sophisticated syndrome measurement strategies: Shor's cat-state approach, which distributes measurements across multiple entangled ancillas achieving 85-92% preparation success; Steane's encoded-ancilla method using complete error-corrected logical qubits reaching 97.8% syndrome fidelity; and a flexible unified framework that adapts strategies based on hardware capabilities. Through extensive simulations using IBM's Qiskit platform spanning randomized benchmarking and T-heavy circuits, we demonstrate that intelligent ancilla management improves error suppression by up to 2.4$\times$ compared to standard approaches. Our implementations achieve logical error rates as low as $5.1 \times 10^{-5}$ under realistic noise conditions with physical error rates of $10^{-3}$, while maintaining near-unity logical fidelity (0.99997) even for deep circuits. The threshold analysis reveals robust performance across distance-3 to distance-13 codes with characteristic threshold curves showing exponential error suppression below the critical physical error rate. These results provide immediately deployable tools for near-term quantum devices and establish practical design principles for scaling toward fault-tolerant quantum computers.

quant-pharXiv:2601.07860•Jan 13, 2026•0 citations

Fault-Tolerant Quantum Error Correction: Implementing Hamming-Based Codes with Advanced Syndrome Extraction Techniques

Soham Bhadra, Diyansha Singh, Angana Chowdhury

Building reliable quantum computers requires protecting fragile quantum states from inevitable environmental noise and operational errors. While quantum error correction codes like the Steane [[7,1,3]] code provide elegant theoretical solutions, their practical success hinges critically on how we measure errors—a process called syndrome extraction. The challenge lies in the ancilla qubits used for measurement: when they fail, errors can cascade across the entire quantum system, destroying the very information we’re trying to protect. We address this fundamental problem by implementing and comparing three sophisticated syndrome measurement strategies: Shor’s cat-state approach, which distributes measurements across multiple entangled ancillas achieving 85-92% preparation success; Steane’s encoded-ancilla method using complete error-corrected logical qubits reaching 97.8% syndrome fidelity; and a flexible unified framework that adapts strategies based on hardware capabilities. Through extensive simulations using IBM’s Qiskit platform spanning randomized benchmarking and T-heavy circuits, we demonstrate that intelligent ancilla management improves error suppression by up to 2.4×compared to standard approaches. Our implementations achieve logical error rates as low as 5.1 ×10^−5 under realistic noise conditions with physical error rates of 10^−3, while maintaining near-unity logical fidelity (0.99997) even for deep circuits. The threshold analysis reveals robust performance across distance-3 to distance-13 codes with characteristic threshold curves showing exponential error suppression below the critical physical error rate. These results provide immediately deployable tools for near-term quantum devices and establish practical design principles for scaling toward fault-tolerant quantum computers.

•Dec 31, 2025•0 citations

Beyond Single-Shot Fault-Tolerant Quantum Error Correction

Nicolas Delfosse, Ben W. Reichardt, Krysta M. Svore

Extensive quantum error correction is necessary in order to perform a useful computation on a noisy quantum computer. Moreover, quantum error correction must be implemented based on imperfect parity check measurements that may return incorrect outcomes or inject additional faults into the qubits. To achieve fault-tolerant error correction, Shor proposed to repeat the sequence of parity check measurements until the same outcome is observed sufficiently many times. Then, one can use this information to perform error correction. A basic implementation of this fault tolerance strategy requires$\Omega (r d^{2})$parity check measurements for a distance-$d$code defined by$r$parity checks. For some specific highly structured quantum codes, Bombin has shown that single-shot fault-tolerant quantum error correction is possible using only$r$measurements. In this work, we consider a phenomenological noise model for parity check measurements assuming that each bit of a codeword and the measurement outcome suffer from independent bit flips with some error rate$p$. For this model, we demonstrate that fault-tolerant quantum error correction can be achieved using$O(d \log (d))$measurements for any code with distance$d \geq \Omega (n^\alpha)$for some constant$\alpha > 0$. Moreover, we prove the existence of a sub-single-shot fault-tolerant quantum error correction scheme using fewer than$r$measurements. In some cases, the number of parity check measurements required for fault-tolerant quantum error correction is exponentially smaller than the number of parity checks defining the code. The short measurement sequences constructed generally have high weight and our phenomenological noise model is not realistic in this regime. Our error correction strategy could find applications to small codes and LDPC codes if one can manage to keep the weight of the measured parity checks low.

arXiv:2002.05180•IEEE Transactions on Information Theory•Oct 16, 2021•36 citations

Use of Shor states for the [7,1,3] quantum error-correcting code

Yaakov S. Weinstein, Sidney Buchbinder

We explore the effect of Shor-state construction methods on logical state encoding and quantum error-correction for the [7,1,3] Calderbank-Shor-Steane quantum error-correction code in a nonequiprobable-error environment. We determine the optimum number of verification steps to be used in Shor-state construction and whether Shor states without verification are usable for practical quantum computation. These results are compared to the same processes of encoding and error correction where Shor states are not used. We demonstrate that the construction of logical zero states with no first-order error terms may not require the complete edifice of quantum fault tolerance. With respect to error correction, we show for a particular initial state that error correction using a single qubit for the syndrome measurement yields a similar output-state accuracy to error correction using Shor states as syndrome qubits. In addition, we demonstrate that error correction with Shor states has an inherent sensitivity to bit-flip errors. Finally, we suggest that in this type of error-correction scenario one should always repeat a syndrome measurement until attaining an all-zero readout (twice in row).

arXiv:1111.3930•Physical Review A•Nov 30, 2012•15 citations

Fault-Tolerant Quantum Error Correction: Implementing Hamming-Based Codes with Advanced Syndrome Extraction Techniques

Soham Bhadra, Diyansha Singh, Angana Chowdhury

Abstract Building reliable quantum computers requires protecting fragile quantum states from inevitable environmental noise and operational errors. While quantum error correction codes like the Steane [7,1,3] code provide elegant theoretical solutions, their practical success hinges critically on how we measure errors—a process called syndrome extraction. The challenge lies in the ancilla qubits used for measurement: when they fail, errors can cascade across the entire quantum system, destroying the very information we're trying to protect. We address this fundamental problem by implementing and comparing three sophisticated syndrome measurement strategies: Shor's cat-state approach, which distributes measurements across multiple entangled ancillas achieving 85-92% preparation success; Steane's encoded-ancilla method using complete error-corrected logical qubits reaching 97.8% syndrome fidelity; and a flexible unified framework that adapts strategies based on hardware capabilities. Through extensive simulations using IBM's Qiskit platform spanning randomized benchmarking and T-heavy circuits, we demonstrate that intelligent ancilla management improves error suppression by up to 2.4x compared to standard approaches. Our implementations achieve logical error rates as low as 5.1 x 10 -5 under realistic noise conditions with physical error rates of 10 -3 , while maintaining near-unity logical fidelity (0.99997) even for deep circuits. The threshold analysis reveals robust performance across distance-3 to distance-13 codes with characteristic threshold curves showing exponential error suppression below the critical physical error rate. These results provide immediately deployable tools for near-term quantum devices and establish practical design principles for scaling toward fault-tolerant quantum computers.

•Jan 6, 2026•0 citations

New methods in quantum error correction and fault-tolerant quantum computing

Christopher Chamberland

Quantum computers have the potential to solve several interesting problems in polynomial \ntime for which no polynomial time classical algorithms have been found. However, \none of the major challenges in building quantum devices is that quantum systems are very \nsensitive to noise arising from undesired interactions with the environment. Noise can lead \nto errors which can corrupt the results of the computation. Quantum error correction is \none way to mitigate the effects of noise arising in quantum devices. \nWith a plethora of quantum error correcting codes that can be used in various settings, \none of the main challenges of quantum error correction is understanding how well various \ncodes perform under more realistic noise models that can be observed in experiments. \nThis thesis proposes a new decoding algorithm which can optimize threshold values of \nerror correcting codes under different noise models. The algorithm can be applied to \nany Markovian noise model. Further, it is shown that for certain noise models, logical \nClifford corrections can further improve a code's threshold value if the code obeys certain \nsymmetries. \n \nSince gates and measurements cannot in general be performed with perfect precision, \nthe operations required to perform quantum error correction can introduce more errors \ninto the system thus negating the benefits of error correction. Fault-tolerant quantum \ncomputing is a way to perform quantum error correction with imperfect operations while \nretaining the ability to suppress errors as long as the noise is below a code's threshold. \nOne of the main challenges in performing fault-tolerant error correction is the high resource \nrequirements that are needed to obtain very low logical noise rates. With the use of \nflag qubits, this thesis develops new fault-tolerant error correction protocols that are applicable \nto arbitrary distance codes. Various code families are shown to satisfy the requirements \nof flag fault-tolerant error correction. We also provide circuits using a constant number of \nqubits for these codes. It is shown that the proposed flag fault-tolerant method uses fewer \nqubits than previous fault-tolerant error correction protocols. \n \nIt is often the case that the noise afflicting a quantum device cannot be fully characterized. \nFurther, even with some knowledge of the noise, it can be very challenging to use \nanalytic decoding methods to improve the performance of a fault-tolerant scheme. This \nthesis presents decoding schemes using several state of the art machine learning techniques \nwith a focus on fault-tolerant quantum error correction in regimes that are relevant to near \nterm experiments. It is shown that even in low noise rate regimes and with no knowledge \nof the noise, noise can be further suppressed for small distance codes. Limitations of machine \nlearning decoders as well as the classical resources required to perform active error \ncorrection are discussed. \n \nIn many cases, gate times can be much shorter than typical measurement times of \nquantum states. Further, classical decoding of the syndrome information used in quantum \nerror correction to compute recovery operators can also be much slower than gate times. \nFor these reasons, schemes where error correction can be implemented in a frame (known \nas the Pauli frame) have been developed to avoid active error correction. In this thesis, we \ngeneralize previous Pauli frame schemes and show how Clifford frame error correction can \nbe implemented with minimal overhead. Clifford frame error correction is necessary if the \nlogical component of recovery operators were chosen from the Clifford group, but could \nalso be used in randomized benchmarking schemes.

•Oct 22, 2018•0 citations
We optimize fault-tolerant quantum error correction to reduce the number of syndrome bit measurements. Speeding up error correction will also speed up an encoded quantum computation, and should reduce its effective error rate. We give both code-specific and general methods, using a variety of techniques and in a variety of settings. We design new quantum error-correcting codes specifically for efficient error correction, e.g., allowing single-shot error correction. For codes with multiple logical qubits, we give methods for combining error correction with partial logical measurements. There are tradeoffs in choosing a code and error-correction technique. While to date most work has concentrated on optimizing the syndrome-extraction procedure, we show that there are also substantial benefits to optimizing how the measured syndromes are chosen and used. As an example, we design single-shot measurement sequences for fault-tolerant quantum error correction with the 16-qubit extended Hamming code. Our scheme uses 10 syndrome bit measurements, compared to 40 measurements with the Shor scheme. We design single-shot logical measurements as well: any logical Z measurement can be made together with fault-tolerant error correction using only 11 measurements. For comparison, using the Shor scheme a basic implementation of such a non-destructive logical measurement uses 63 measurements. We also offer ten open problems, the solutions of which could lead to substantial improvements of fault-tolerant error correction.
Building reliable quantum computers requires protecting fragile quantum states from inevitable environmental noise and operational errors. While quantum error correction codes like the Steane [ ⁣[7,1,3] ⁣][\![7,1,3]\!][[7,1,3]] code provide elegant theoretical solutions, their practical success hinges critically on how we measure errors - a process called syndrome extraction. The challenge lies in the ancilla qubits used for measurement: when they fail, errors can cascade across the entire quantum system, destroying the very information we're trying to protect. We address this fundamental problem by implementing and comparing three sophisticated syndrome measurement strategies: Shor's cat-state approach, which distributes measurements across multiple entangled ancillas achieving 85-92% preparation success; Steane's encoded-ancilla method using complete error-corrected logical qubits reaching 97.8% syndrome fidelity; and a flexible unified framework that adapts strategies based on hardware capabilities. Through extensive simulations using IBM's Qiskit platform spanning randomized benchmarking and T-heavy circuits, we demonstrate that intelligent ancilla management improves error suppression by up to 2.4×\times× compared to standard approaches. Our implementations achieve logical error rates as low as 5.1×10−55.1 \times 10^{-5}5.1×10−5 under realistic noise conditions with physical error rates of 10−310^{-3}10−3, while maintaining near-unity logical fidelity (0.99997) even for deep circuits. The threshold analysis reveals robust performance across distance-3 to distance-13 codes with characteristic threshold curves showing exponential error suppression below the critical physical error rate. These results provide immediately deployable tools for near-term quantum devices and establish practical design principles for scaling toward fault-tolerant quantum computers.
Building reliable quantum computers requires protecting fragile quantum states from inevitable environmental noise and operational errors. While quantum error correction codes like the Steane [[7,1,3]] code provide elegant theoretical solutions, their practical success hinges critically on how we measure errors—a process called syndrome extraction. The challenge lies in the ancilla qubits used for measurement: when they fail, errors can cascade across the entire quantum system, destroying the very information we’re trying to protect. We address this fundamental problem by implementing and comparing three sophisticated syndrome measurement strategies: Shor’s cat-state approach, which distributes measurements across multiple entangled ancillas achieving 85-92% preparation success; Steane’s encoded-ancilla method using complete error-corrected logical qubits reaching 97.8% syndrome fidelity; and a flexible unified framework that adapts strategies based on hardware capabilities. Through extensive simulations using IBM’s Qiskit platform spanning randomized benchmarking and T-heavy circuits, we demonstrate that intelligent ancilla management improves error suppression by up to 2.4×compared to standard approaches. Our implementations achieve logical error rates as low as 5.1 ×10^−5 under realistic noise conditions with physical error rates of 10^−3, while maintaining near-unity logical fidelity (0.99997) even for deep circuits. The threshold analysis reveals robust performance across distance-3 to distance-13 codes with characteristic threshold curves showing exponential error suppression below the critical physical error rate. These results provide immediately deployable tools for near-term quantum devices and establish practical design principles for scaling toward fault-tolerant quantum computers.
Extensive quantum error correction is necessary in order to perform a useful computation on a noisy quantum computer. Moreover, quantum error correction must be implemented based on imperfect parity check measurements that may return incorrect outcomes or inject additional faults into the qubits. To achieve fault-tolerant error correction, Shor proposed to repeat the sequence of parity check measurements until the same outcome is observed sufficiently many times. Then, one can use this information to perform error correction. A basic implementation of this fault tolerance strategy requiresΩ(rd2)\Omega (r d^{2})Ω(rd2)parity check measurements for a distance-dddcode defined byrrrparity checks. For some specific highly structured quantum codes, Bombin has shown that single-shot fault-tolerant quantum error correction is possible using onlyrrrmeasurements. In this work, we consider a phenomenological noise model for parity check measurements assuming that each bit of a codeword and the measurement outcome suffer from independent bit flips with some error rateppp. For this model, we demonstrate that fault-tolerant quantum error correction can be achieved usingO(dlog⁡(d))O(d \log (d))O(dlog(d))measurements for any code with distanced≥Ω(nα)d \geq \Omega (n^\alpha)d≥Ω(nα)for some constantα>0\alpha > 0α>0. Moreover, we prove the existence of a sub-single-shot fault-tolerant quantum error correction scheme using fewer thanrrrmeasurements. In some cases, the number of parity check measurements required for fault-tolerant quantum error correction is exponentially smaller than the number of parity checks defining the code. The short measurement sequences constructed generally have high weight and our phenomenological noise model is not realistic in this regime. Our error correction strategy could find applications to small codes and LDPC codes if one can manage to keep the weight of the measured parity checks low.
We explore the effect of Shor-state construction methods on logical state encoding and quantum error-correction for the [7,1,3] Calderbank-Shor-Steane quantum error-correction code in a nonequiprobable-error environment. We determine the optimum number of verification steps to be used in Shor-state construction and whether Shor states without verification are usable for practical quantum computation. These results are compared to the same processes of encoding and error correction where Shor states are not used. We demonstrate that the construction of logical zero states with no first-order error terms may not require the complete edifice of quantum fault tolerance. With respect to error correction, we show for a particular initial state that error correction using a single qubit for the syndrome measurement yields a similar output-state accuracy to error correction using Shor states as syndrome qubits. In addition, we demonstrate that error correction with Shor states has an inherent sensitivity to bit-flip errors. Finally, we suggest that in this type of error-correction scenario one should always repeat a syndrome measurement until attaining an all-zero readout (twice in row).
Abstract Building reliable quantum computers requires protecting fragile quantum states from inevitable environmental noise and operational errors. While quantum error correction codes like the Steane [7,1,3] code provide elegant theoretical solutions, their practical success hinges critically on how we measure errors—a process called syndrome extraction. The challenge lies in the ancilla qubits used for measurement: when they fail, errors can cascade across the entire quantum system, destroying the very information we're trying to protect. We address this fundamental problem by implementing and comparing three sophisticated syndrome measurement strategies: Shor's cat-state approach, which distributes measurements across multiple entangled ancillas achieving 85-92% preparation success; Steane's encoded-ancilla method using complete error-corrected logical qubits reaching 97.8% syndrome fidelity; and a flexible unified framework that adapts strategies based on hardware capabilities. Through extensive simulations using IBM's Qiskit platform spanning randomized benchmarking and T-heavy circuits, we demonstrate that intelligent ancilla management improves error suppression by up to 2.4x compared to standard approaches. Our implementations achieve logical error rates as low as 5.1 x 10 -5 under realistic noise conditions with physical error rates of 10 -3 , while maintaining near-unity logical fidelity (0.99997) even for deep circuits. The threshold analysis reveals robust performance across distance-3 to distance-13 codes with characteristic threshold curves showing exponential error suppression below the critical physical error rate. These results provide immediately deployable tools for near-term quantum devices and establish practical design principles for scaling toward fault-tolerant quantum computers.
Quantum computers have the potential to solve several interesting problems in polynomial \ntime for which no polynomial time classical algorithms have been found. However, \none of the major challenges in building quantum devices is that quantum systems are very \nsensitive to noise arising from undesired interactions with the environment. Noise can lead \nto errors which can corrupt the results of the computation. Quantum error correction is \none way to mitigate the effects of noise arising in quantum devices. \nWith a plethora of quantum error correcting codes that can be used in various settings, \none of the main challenges of quantum error correction is understanding how well various \ncodes perform under more realistic noise models that can be observed in experiments. \nThis thesis proposes a new decoding algorithm which can optimize threshold values of \nerror correcting codes under different noise models. The algorithm can be applied to \nany Markovian noise model. Further, it is shown that for certain noise models, logical \nClifford corrections can further improve a code's threshold value if the code obeys certain \nsymmetries. \n \nSince gates and measurements cannot in general be performed with perfect precision, \nthe operations required to perform quantum error correction can introduce more errors \ninto the system thus negating the benefits of error correction. Fault-tolerant quantum \ncomputing is a way to perform quantum error correction with imperfect operations while \nretaining the ability to suppress errors as long as the noise is below a code's threshold. \nOne of the main challenges in performing fault-tolerant error correction is the high resource \nrequirements that are needed to obtain very low logical noise rates. With the use of \nflag qubits, this thesis develops new fault-tolerant error correction protocols that are applicable \nto arbitrary distance codes. Various code families are shown to satisfy the requirements \nof flag fault-tolerant error correction. We also provide circuits using a constant number of \nqubits for these codes. It is shown that the proposed flag fault-tolerant method uses fewer \nqubits than previous fault-tolerant error correction protocols. \n \nIt is often the case that the noise afflicting a quantum device cannot be fully characterized. \nFurther, even with some knowledge of the noise, it can be very challenging to use \nanalytic decoding methods to improve the performance of a fault-tolerant scheme. This \nthesis presents decoding schemes using several state of the art machine learning techniques \nwith a focus on fault-tolerant quantum error correction in regimes that are relevant to near \nterm experiments. It is shown that even in low noise rate regimes and with no knowledge \nof the noise, noise can be further suppressed for small distance codes. Limitations of machine \nlearning decoders as well as the classical resources required to perform active error \ncorrection are discussed. \n \nIn many cases, gate times can be much shorter than typical measurement times of \nquantum states. Further, classical decoding of the syndrome information used in quantum \nerror correction to compute recovery operators can also be much slower than gate times. \nFor these reasons, schemes where error correction can be implemented in a frame (known \nas the Pauli frame) have been developed to avoid active error correction. In this thesis, we \ngeneralize previous Pauli frame schemes and show how Clifford frame error correction can \nbe implemented with minimal overhead. Clifford frame error correction is necessary if the \nlogical component of recovery operators were chosen from the Clifford group, but could \nalso be used in randomized benchmarking schemes.