Challenges
Datasets
Workspaces
Papers
Discussions
Leaderboard
Log inSign up
Challenges
Datasets
Workspaces
Papers
Discussions
Leaderboard
Blog
Job Board
Q3AS

© 2026 Aqora Quantum S.A.S.

TermsPrivacyLegal Notice

arXiv:2006.13230 · Physical Review A

Multiphase estimation without a reference mode

Aaron Z. Goldberg, Ilaria Gianani, Marco Barbieri, Fabio Sciarrino, Aephraim M. Steinberg, Nicolò Spagnolo

Published Aug 27, 2020• 27 citations
arXivHTMLPDF

Abstract

Multiphase estimation is a paradigmatic example of a multiparameter problem. When measuring multiple phases embedded in interferometric networks, specially tailored input quantum states achieve enhanced sensitivities compared with both single-parameter and classical estimation schemes. Significant attention has been devoted to defining the optimal strategies for the scenario in which all of the phases are evaluated with respect to a common reference mode, in terms of optimal probe states and optimal measurement operators. Also, the strategies assume unlimited external resources, which is experimentally unrealistic. Here, we optimize a generalized scenario that treats all of the phases on an equal footing and takes into account the resources provided by external references. We show that the absence of an external reference mode reduces the number of simultaneously estimable parameters, owing to the immeasurability of global phases, and that the symmetries of the parameters being estimated dictate the symmetries of the optimal probe states. Finally, we provide insight for constructing optimal measurements in this generalized scenario. The experimental viability of this paper underlies its immediate practical importance beyond fundamental physics.

DOI
10.1103/physreva.102.022230

Related papers

Quantum multiphase estimation

Marco Barbieri, Ilaria Gianani, Aaron Z. Goldberg +1 more

Quantum phase estimation is fundamental to advancing quantum science and technology. While much of the research has concentrated on estimating a single phase, the simultaneous estimation of multiple phases can yield significantly enhanced sensitivities when using specially tailored input quantum states. This work reviews recent theoretical and experimental advancements in the parallel estimation of multiple arbitrary phases. We highlight strategies for constructing optimal measurement protocols and discuss the experimental platforms best suited for implementing these techniques.

arXiv:2502.07873•Contemporary Physics•Apr 2, 2024•4 citations

Local versus global strategies in multiparameter estimation

Paul A. Knott, Timothy J Proctor, A. J. Hayes +3 more

We consider the problem of estimating multiple phases using a multimode interferometer. In this setting we show that while global strategies that estimate all the phases simultaneously can lead to high precision gains, the same enhancements can be obtained with local strategies in which each phase is estimated individually. A key resource for the enhancement is shown to be a large particle-number variance in the probe state, and for states where the total particle number is not fixed, this can be obtained for mode-separable states, and the phases can be read out with local measurements. This has important practical implications because local strategies are generally preferred to global ones for their robustness to local estimation failure, flexibility in the distribution of resources, and comparatively easier state preparation. We obtain our results by analyzing two different schemes: the first uses a set of interferometers, which can be used as a model for a network of quantum sensors, and the second looks at measuring a number of phases relative to a reference, which is concerned primarily with quantum imaging.

arXiv:1601.05912•Physical Review A•Dec 9, 2016•85 citations

Simultaneous optical phase and loss estimation revisited: measurement and probe incompatibility

M. E. O. Bezerra, Francesco Albarelli, Rafał Demkowicz-Dobrzański

Abstract Quantum multiparameter metrology is hindered by incompatibility issues, such as finding a single probe state (probe incompatibility) and a single measurement (measurement incompatibility) optimal for all parameters. The simultaneous estimation of phase shift and loss in a single optical mode is a paradigmatic multiparameter metrological problem in which such tradeoffs are present. We consider two settings: single-mode or two-mode probes (with a reference lossless mode), and for each setting we consider either Gaussian states or arbitrary quantum states of light restricted only by a maximal number of photons allowed. We find numerically that, as the number of photons increases, there are quantum states of light for which probe incompatibility disappears both in the single- and two-mode scenarios. On the other hand, for Gaussian states, probe incompatibility is present in the single-mode case and may be removed only in the two-mode setting thanks to the entanglement with the reference mode. Finally, we provide strong arguments that the fundamental incompatibility aspect of the model is measurement incompatibility, which persists for all the scenarios considered, and unlike probe-incompatibility cannot be overcome even in the large photon number limit.

arXiv:2504.02893•Journal of Physics A Mathematical and Theoretical•Jun 16, 2025•5 citations

Protocol for global multiphase estimation

Giovanni Chesi, Alberto Riccardi, Roberto Rubboli +2 more

Global estimation strategies allow one to extract information on a phase or a set of phases without any prior knowledge, which is required for local estimation strategies. We devise a global multiphase protocol based on Holevo's estimation theory and apply it to the case of digital estimation, i.e., we estimate the phases in terms of the mutual information between them and the corresponding estimators. We test the protocol in two particular cases, i.e., the single-phase and the double-phase estimation. In the single-phase scenario, the protocol encompasses two specific known optimal strategies. We extend them to the simultaneous estimation of two phases and evaluate their performance. Then we retrieve the ultimate digital bound on precision when a generic number of phases is simultaneously estimated. This bound is again expressed in terms of mutual information and is general for any digital multiphase estimation protocol. We show that in the multiphase strategy there is only a constant quantum advantage with respect to a sequence of independent single-phase estimations. This extends a recent similar result, which settled a controversy on the search for the multiphase enhancement.

arXiv:2301.07380•Physical Review A•Jul 17, 2023•10 citations

Optimal Measurements for Simultaneous Quantum Estimation of Multiple Phases

Luca Pezzè, Mario Arnolfo Ciampini, Nicolò Spagnolo +6 more

A quantum theory of multiphase estimation is crucial for quantum-enhanced sensing and imaging and may link quantum metrology to more complex quantum computation and communication protocols. In this Letter, we tackle one of the key difficulties of multiphase estimation: obtaining a measurement which saturates the fundamental sensitivity bounds. We derive necessary and sufficient conditions for projective measurements acting on pure states to saturate the ultimate theoretical bound on precision given by the quantum Fisher information matrix. We apply our theory to the specific example of interferometric phase estimation using photon number measurements, a convenient choice in the laboratory. Our results thus introduce concepts and methods relevant to the future theoretical and experimental development of multiparameter estimation.

arXiv:1705.03687•Physical Review Letters•Sep 29, 2017•200 citations

Experimental Multiphase Estimation in an Integrated Reconfigurable Multi-Arm Interferometer

Emanuele Polino, Martina Riva, Mauro Valeri +6 more

Summary form only given. Phase estimation represents one of the most notable examples in the context of the quantum metrology. The aim is to improve the capabilities to measure an unknown phase shift between the arms of an interferometer with respect to classical strategies by adopting quantum resources. Applications of the phase estimation task can be found in different contexts, such as imaging, measurements on biological systems, or gravitational wave detection [1]. While the theoretical and experimental frameworks for the single parameter case are well established, several open questions arise when extending the scenario to multiparameter estimation. Indeed, when the number of parameters to be estimated is larger than one, it is not trivial to saturate the ultimate bounds for all parameters simultaneously [2]. Hence, it becomes crucial to identify and implement experimentally a suitable platform to develop appropriate protocols for efficient multiphase estimation protocols. Here, we report [3] the experimental implementation of an interferometric platform to investigate experimentally multiphase estimation protocols. Such platform, shown in Fig. 1, is implemented by adopting the femtosecond laser micromachining technology, that allows to realize integrated photonic circuits including several optical elements. The implemented interferometer (Fig. 1) is composed of a first unitary transformation for state preparation, namely a balanced tritter [4,5], a second stage for internal phases, and a second unitary transformation for measurement of the output state. Reconfigurability in the device is inserted by means of thermo-optic phase shifters, that allow to tune the optical phases by applying a voltage on gold-plated resistors placed on top of the waveguides [6]. Resistors pattern on the device has been realized by using the same laser writing technology employed to implement the interferometric structure. We have then performed a multiphase estimation experiment by injecting two-photon input states within the interferometer for simultaneous measurement of two phases.

Conference on Lasers and Electro-Optics Europe & European Quantum Electronics Conference (CLEO/Europe-EQEC)•Jun 1, 2019•0 citations
Multiphase estimation is a paradigmatic example of a multiparameter problem. When measuring multiple phases embedded in interferometric networks, specially tailored input quantum states achieve enhanced sensitivities compared with both single-parameter and classical estimation schemes. Significant attention has been devoted to defining the optimal strategies for the scenario in which all of the phases are evaluated with respect to a common reference mode, in terms of optimal probe states and optimal measurement operators. Also, the strategies assume unlimited external resources, which is experimentally unrealistic. Here, we optimize a generalized scenario that treats all of the phases on an equal footing and takes into account the resources provided by external references. We show that the absence of an external reference mode reduces the number of simultaneously estimable parameters, owing to the immeasurability of global phases, and that the symmetries of the parameters being estimated dictate the symmetries of the optimal probe states. Finally, we provide insight for constructing optimal measurements in this generalized scenario. The experimental viability of this paper underlies its immediate practical importance beyond fundamental physics.
Quantum phase estimation is fundamental to advancing quantum science and technology. While much of the research has concentrated on estimating a single phase, the simultaneous estimation of multiple phases can yield significantly enhanced sensitivities when using specially tailored input quantum states. This work reviews recent theoretical and experimental advancements in the parallel estimation of multiple arbitrary phases. We highlight strategies for constructing optimal measurement protocols and discuss the experimental platforms best suited for implementing these techniques.
We consider the problem of estimating multiple phases using a multimode interferometer. In this setting we show that while global strategies that estimate all the phases simultaneously can lead to high precision gains, the same enhancements can be obtained with local strategies in which each phase is estimated individually. A key resource for the enhancement is shown to be a large particle-number variance in the probe state, and for states where the total particle number is not fixed, this can be obtained for mode-separable states, and the phases can be read out with local measurements. This has important practical implications because local strategies are generally preferred to global ones for their robustness to local estimation failure, flexibility in the distribution of resources, and comparatively easier state preparation. We obtain our results by analyzing two different schemes: the first uses a set of interferometers, which can be used as a model for a network of quantum sensors, and the second looks at measuring a number of phases relative to a reference, which is concerned primarily with quantum imaging.
Abstract Quantum multiparameter metrology is hindered by incompatibility issues, such as finding a single probe state (probe incompatibility) and a single measurement (measurement incompatibility) optimal for all parameters. The simultaneous estimation of phase shift and loss in a single optical mode is a paradigmatic multiparameter metrological problem in which such tradeoffs are present. We consider two settings: single-mode or two-mode probes (with a reference lossless mode), and for each setting we consider either Gaussian states or arbitrary quantum states of light restricted only by a maximal number of photons allowed. We find numerically that, as the number of photons increases, there are quantum states of light for which probe incompatibility disappears both in the single- and two-mode scenarios. On the other hand, for Gaussian states, probe incompatibility is present in the single-mode case and may be removed only in the two-mode setting thanks to the entanglement with the reference mode. Finally, we provide strong arguments that the fundamental incompatibility aspect of the model is measurement incompatibility, which persists for all the scenarios considered, and unlike probe-incompatibility cannot be overcome even in the large photon number limit.
Global estimation strategies allow one to extract information on a phase or a set of phases without any prior knowledge, which is required for local estimation strategies. We devise a global multiphase protocol based on Holevo's estimation theory and apply it to the case of digital estimation, i.e., we estimate the phases in terms of the mutual information between them and the corresponding estimators. We test the protocol in two particular cases, i.e., the single-phase and the double-phase estimation. In the single-phase scenario, the protocol encompasses two specific known optimal strategies. We extend them to the simultaneous estimation of two phases and evaluate their performance. Then we retrieve the ultimate digital bound on precision when a generic number of phases is simultaneously estimated. This bound is again expressed in terms of mutual information and is general for any digital multiphase estimation protocol. We show that in the multiphase strategy there is only a constant quantum advantage with respect to a sequence of independent single-phase estimations. This extends a recent similar result, which settled a controversy on the search for the multiphase enhancement.
A quantum theory of multiphase estimation is crucial for quantum-enhanced sensing and imaging and may link quantum metrology to more complex quantum computation and communication protocols. In this Letter, we tackle one of the key difficulties of multiphase estimation: obtaining a measurement which saturates the fundamental sensitivity bounds. We derive necessary and sufficient conditions for projective measurements acting on pure states to saturate the ultimate theoretical bound on precision given by the quantum Fisher information matrix. We apply our theory to the specific example of interferometric phase estimation using photon number measurements, a convenient choice in the laboratory. Our results thus introduce concepts and methods relevant to the future theoretical and experimental development of multiparameter estimation.
Summary form only given. Phase estimation represents one of the most notable examples in the context of the quantum metrology. The aim is to improve the capabilities to measure an unknown phase shift between the arms of an interferometer with respect to classical strategies by adopting quantum resources. Applications of the phase estimation task can be found in different contexts, such as imaging, measurements on biological systems, or gravitational wave detection [1]. While the theoretical and experimental frameworks for the single parameter case are well established, several open questions arise when extending the scenario to multiparameter estimation. Indeed, when the number of parameters to be estimated is larger than one, it is not trivial to saturate the ultimate bounds for all parameters simultaneously [2]. Hence, it becomes crucial to identify and implement experimentally a suitable platform to develop appropriate protocols for efficient multiphase estimation protocols. Here, we report [3] the experimental implementation of an interferometric platform to investigate experimentally multiphase estimation protocols. Such platform, shown in Fig. 1, is implemented by adopting the femtosecond laser micromachining technology, that allows to realize integrated photonic circuits including several optical elements. The implemented interferometer (Fig. 1) is composed of a first unitary transformation for state preparation, namely a balanced tritter [4,5], a second stage for internal phases, and a second unitary transformation for measurement of the output state. Reconfigurability in the device is inserted by means of thermo-optic phase shifters, that allow to tune the optical phases by applying a voltage on gold-plated resistors placed on top of the waveguides [6]. Resistors pattern on the device has been realized by using the same laser writing technology employed to implement the interferometric structure. We have then performed a multiphase estimation experiment by injecting two-photon input states within the interferometer for simultaneous measurement of two phases.