Challenges
Datasets
Workspaces
Papers
Discussions
Leaderboard
Log inSign up
Challenges
Datasets
Workspaces
Papers
Discussions
Leaderboard
Blog
Job Board
Q3AS

© 2026 Aqora Quantum S.A.S.

TermsPrivacyLegal Notice

arXiv:2005.02651 · Optics Express

Optical frequency analysis on dark state of a single trapped ion

Adam Lešundák, Tuan M. Pham, Martin Čížek, Petr Obšil, Lukáš Slodička, Ondřej Číp

Published Mar 24, 2020• 5 citations
arXivHTMLPDF

Abstract

We demonstrate an optical frequency analysis method using the Fourier transform of detection times of fluorescence photons emitted from a single trapped 40Ca+ ion. The response of the detected photon rate to the relative laser frequency deviations is recorded within the slope of a dark resonance formed in the lambda-type energy level scheme corresponding to two optical dipole transitions. This approach enhances the sensitivity to the small frequency deviations and does so with reciprocal dependence on the fluorescence rate. The employed lasers are phase locked to an optical frequency comb, which allows for precise calibration of optical frequency analysis by deterministic modulation of the analyzed laser beam with respect to the reference beam. The attainable high signal-to-noise ratios of up to a MHz range of modulation deviations and up to a hundred kHz modulation frequencies promise the applicability of the presented results in a broad range of optical spectroscopic applications.

DOI
10.1364/oe.389411

Related papers

Sensing fields with ion in a dark state

Adam Lešundák, Tuan Minh Pham, Martin Čížek +5 more

Trapped ions, as one of the pillars of progress in frequency metrology and quantum optics, require a complex experimental environment with well-defined conditions. We present that a feature called dark resonance, provided by the trapped ion itself, can be used as a versatile sensor for enhanced in-situ analysis of interacting fields. The dark resonance is formed in the lambda-type energy level scheme of a laser cooled 40Ca+ ion and corresponds to a fluorescence quenching. The method uses an analysis of the detection times of photons emitted from the upper energy level, which is excited via two optical dipole transitions. The two excitation lasers are phase locked to an optical frequency comb to reduce their linewidths and for precise control of their optical frequencies within the dark resonance. The amplitudes of interacting fields are obtained using the Fourier transform of the ion fluorescence or photon correlation measurements. This paper shows that the method can be applied for sensing of electric, magnetic and electromagnetic fields. Firstly, we present the potential for frequency analysis of the secular motion of a few-ion Coulomb crystal, which corresponds to the axial static electric field of a linear ion trap. Secondly, we demonstrate the optical frequency analysis of the employed lasers driving the two transitions. In the last case we show the analysis of an alternating magnetic field at the position of single ion.

Photonics for Quantum (PfQ)•Jul 9, 2021•0 citations

Direct frequency comb spectroscopy in trapped 40Ca+ ions on a dipoleforbidden clock transition

Anne Lisa Wolf, Jonas Morgenweg, Jeroen C. J. Koelemeij +3 more

Optical frequency combs (FCs) have revolutionised ultra-high precision metrology by providing a link between optical and microwave frequencies. While FCs are traditionally used for calibrating a CW probe-laser, also direct frequency comb spectroscopy (DFCS) is possible. We have recently demonstrated the versatility of DFCS performed in the environment of an ion trap, combining the broad spectral range of a Ti: sapphire FC with the feasibility of trapping and (sympathetic) cooling of different ion species. In the presented contribution it is shown that by employing single-ion imaging, this technique can be extended even to dipole-forbidden transitions, despite the low power per unamplified comb mode of ~0.1 μW.

Conference on Lasers and Electro-Optics Europe & European Quantum Electronics Conference (CLEO/Europe-EQEC)•May 1, 2011•1 citation

Spectroscopic characterization of ion motion for an optical clock based on Coulomb crystals

Keller, Jonas

Laser-cooled, trapped ions are among the most successful candidates for an optical frequency standard, with fractional frequency uncertainties approaching the low 10 -18 range.However, current implementations of optical ion clocks are based on a single reference ion, which results in an intrinsically low signal-to-noise ratio.Averaging times of several days are necessary for resolving the transition frequency well enough to benefit from these low systematic uncertainties.In order to overcome this impediment to applications, the averaging can be performed more quickly by interrogating an ensemble of ions simultaneously.Due to their mutual repulsion, these ions can be confined by a common trapping potential, in which they arrange in crystalline structures (Coulomb crystals).The technical challenge of this approach is to preserve the excellent systematic uncertainties obtainable with a single ion.This work contributes to the approach of using 115 In + / 172 Yb + Coulomb crystals as the reference for an optical clock.Two ultra-stable cavities for the stabilization of spectroscopy lasers have been set up.With a simple setup, a diode laser has been stabilized to σ y (1 s) = 6 × 10 -16 .The vibration sensitivity of a simple 30 cm long spacer has been measured, showing that a cavity using this spacer can provide a fractional frequency instability of σ y = 1 × 10 -16 for times > 30 ms, sufficient to operate a clock based on 100 115 In + ions at its quantum projection noise limit of 7.2 × 10 -17 / τ /s.Frequency shifts resulting from time dilation due to ion motion are among the limiting contributions in current ion frequency standards.A spectroscopy laser has been set up in order to characterize the motion of Coulomb crystals by interrogating a narrow transition in 172 Yb + .Spatially resolved state detection with an EMCCD camera allows multiple ions to be interrogated simultaneously.Groundstate cooling of two modes in a single ion allowed the determination of heating rates below 2 s -1 at secular frequencies around 500 kHz.Three micromotion compensation techniques have been characterized in terms of their resolution and applicability during clock operation.A new model was developed for the photon-correlation technique to allow quantitative evaluation in the common regime of comparable drive frequency and linewidth.It was experimentally verified in a comparison with resolved sideband measurements.Both the photon-correlation and the parametric excitation method were shown capable of micromotion compensation with a resulting fractional frequency uncertainty well below 10 -19 .Overall, it has been shown that the motional frequency shift contributions due to external heating, secular motion and micromotion in a single 115 In + ion can each be controlled at a level of 10 -19 in the present setup and the foundation has been laid to extend these measurements to multiple ions.

•Jan 1, 2015•5 citations

Spectroscopy of Single Trapped Ions and Application to Frequency Standards

HERBERT WALTHER

Single ions trapped and laser cooled provide ideal objects for high resolution spectroscopy and frequency standards. For the latter purpose we are investigating the 5s2 1S0 → 5s5p 3P0 transition of In+. With a natural linewidth of only 1.1 Hz this resonance offers very high resolution and is highly immune to frequency shifts due to external electromagnetic fields, because it connects two levels with vanishing electronic magnetic momenta [1]. The wavelength of this clock transition is 236.5 nm and is technically very convenient, since it coincides with the fourth harmonic of the 946 nm Nd:YAG laser line. So this intrinsically frequency stable solid-state laser can be used to excite the transition [2]. For laser cooling and fluorescence detection of the indium ion the 5s2 1So -> 5s5p 3P1 transition at 230.6 nm can be employed. The use of the relatively narrow intercombination line for laser cooling allows us to study optical sideband cooling in the strong binding regime, where the oscillation frequencies of the ion in the trap (around 1 MHz) are larger than the optical linewidth of 360 kHz. In this parameter range laser cooling is possible to the quantum ground state of the vibrational motion in the trap corresponding to a temperature of roughly 100 μK. The same low temperature was obtained with sideband cooling of a small Coulomb crystal consisting of two ions, creating an interesting new quantum few-particle system.

Conference on Lasers and Electro-Optics Europe & European Quantum Electronics Conference (CLEO/Europe-EQEC)•Jan 1, 1998•0 citations

Setup of a dipole trap for all-optical trapping*

Miao Wang, Zheng Chen, Yao Huang +2 more

Micromotion induced by the radio-frequency field contributes greatly to the systematic frequency shifts of optical frequency standards. Although different strategies for mitigating this effect have been proposed, trapping ions optically has the potential to provide a generic solution to the elimination of micromotion. This could be achieved by trapping a single ion in the dipole trap composed of a highpower laser field. Here, we present the setup of the dipole trap composed of a 532 nm laser at a power of 10 W aiming to optically trap a single 40Ca+ and we observe an AC-Stark shift of the fluorescence spectrum line of ∼22 MHz caused by the 532 nm dipole beam. The beam waist of the dipole laser is several microns, which would provide a dipole potential strong enough for all-optical trapping of a single 40Ca+ ion.

Chinese Physics B•Dec 30, 2020•2 citations

Coherently displaced oscillator quantum states of a single trapped atom

Katherine C McCormick, Jonas Keller, David J Wineland +2 more

Coherently displaced number states of a harmonically bound ion can be coupled to two internal states of the ion by a laser-induced motional sideband interaction. The internal states can subsequently be read out in a projective measurement via state-dependent fluorescence, with near-unit fidelity. This leads to a rich set of line shapes when recording the internal-state excitation probability after a sideband excitation, as a function of the frequency detuning of the displacement drive with respect to the ion's motional frequency. We precisely characterize the coherent displacement based on the resulting line shapes, which exhibit sharp features that are useful for oscillator frequency determination from the single quantum regime up to very large coherent states with average occupation numbers of several hundred. We also introduce a technique based on multiple coherent displacements and free precession for characterizing noise on the trapping potential in the frequency range of 500 Hz–400 kHz. Signals from the ion are directly used to find and eliminate sources of technical noise in this typically unaccessed part of the spectrum.

arXiv:1811.00668•Quantum Science and Technology•Feb 7, 2019•17 citations
We demonstrate an optical frequency analysis method using the Fourier transform of detection times of fluorescence photons emitted from a single trapped 40Ca+ ion. The response of the detected photon rate to the relative laser frequency deviations is recorded within the slope of a dark resonance formed in the lambda-type energy level scheme corresponding to two optical dipole transitions. This approach enhances the sensitivity to the small frequency deviations and does so with reciprocal dependence on the fluorescence rate. The employed lasers are phase locked to an optical frequency comb, which allows for precise calibration of optical frequency analysis by deterministic modulation of the analyzed laser beam with respect to the reference beam. The attainable high signal-to-noise ratios of up to a MHz range of modulation deviations and up to a hundred kHz modulation frequencies promise the applicability of the presented results in a broad range of optical spectroscopic applications.
Trapped ions, as one of the pillars of progress in frequency metrology and quantum optics, require a complex experimental environment with well-defined conditions. We present that a feature called dark resonance, provided by the trapped ion itself, can be used as a versatile sensor for enhanced in-situ analysis of interacting fields. The dark resonance is formed in the lambda-type energy level scheme of a laser cooled 40Ca+ ion and corresponds to a fluorescence quenching. The method uses an analysis of the detection times of photons emitted from the upper energy level, which is excited via two optical dipole transitions. The two excitation lasers are phase locked to an optical frequency comb to reduce their linewidths and for precise control of their optical frequencies within the dark resonance. The amplitudes of interacting fields are obtained using the Fourier transform of the ion fluorescence or photon correlation measurements. This paper shows that the method can be applied for sensing of electric, magnetic and electromagnetic fields. Firstly, we present the potential for frequency analysis of the secular motion of a few-ion Coulomb crystal, which corresponds to the axial static electric field of a linear ion trap. Secondly, we demonstrate the optical frequency analysis of the employed lasers driving the two transitions. In the last case we show the analysis of an alternating magnetic field at the position of single ion.
Optical frequency combs (FCs) have revolutionised ultra-high precision metrology by providing a link between optical and microwave frequencies. While FCs are traditionally used for calibrating a CW probe-laser, also direct frequency comb spectroscopy (DFCS) is possible. We have recently demonstrated the versatility of DFCS performed in the environment of an ion trap, combining the broad spectral range of a Ti: sapphire FC with the feasibility of trapping and (sympathetic) cooling of different ion species. In the presented contribution it is shown that by employing single-ion imaging, this technique can be extended even to dipole-forbidden transitions, despite the low power per unamplified comb mode of ~0.1 μW.
Laser-cooled, trapped ions are among the most successful candidates for an optical frequency standard, with fractional frequency uncertainties approaching the low 10 -18 range.However, current implementations of optical ion clocks are based on a single reference ion, which results in an intrinsically low signal-to-noise ratio.Averaging times of several days are necessary for resolving the transition frequency well enough to benefit from these low systematic uncertainties.In order to overcome this impediment to applications, the averaging can be performed more quickly by interrogating an ensemble of ions simultaneously.Due to their mutual repulsion, these ions can be confined by a common trapping potential, in which they arrange in crystalline structures (Coulomb crystals).The technical challenge of this approach is to preserve the excellent systematic uncertainties obtainable with a single ion.This work contributes to the approach of using 115 In + / 172 Yb + Coulomb crystals as the reference for an optical clock.Two ultra-stable cavities for the stabilization of spectroscopy lasers have been set up.With a simple setup, a diode laser has been stabilized to σ y (1 s) = 6 × 10 -16 .The vibration sensitivity of a simple 30 cm long spacer has been measured, showing that a cavity using this spacer can provide a fractional frequency instability of σ y = 1 × 10 -16 for times > 30 ms, sufficient to operate a clock based on 100 115 In + ions at its quantum projection noise limit of 7.2 × 10 -17 / τ /s.Frequency shifts resulting from time dilation due to ion motion are among the limiting contributions in current ion frequency standards.A spectroscopy laser has been set up in order to characterize the motion of Coulomb crystals by interrogating a narrow transition in 172 Yb + .Spatially resolved state detection with an EMCCD camera allows multiple ions to be interrogated simultaneously.Groundstate cooling of two modes in a single ion allowed the determination of heating rates below 2 s -1 at secular frequencies around 500 kHz.Three micromotion compensation techniques have been characterized in terms of their resolution and applicability during clock operation.A new model was developed for the photon-correlation technique to allow quantitative evaluation in the common regime of comparable drive frequency and linewidth.It was experimentally verified in a comparison with resolved sideband measurements.Both the photon-correlation and the parametric excitation method were shown capable of micromotion compensation with a resulting fractional frequency uncertainty well below 10 -19 .Overall, it has been shown that the motional frequency shift contributions due to external heating, secular motion and micromotion in a single 115 In + ion can each be controlled at a level of 10 -19 in the present setup and the foundation has been laid to extend these measurements to multiple ions.
Single ions trapped and laser cooled provide ideal objects for high resolution spectroscopy and frequency standards. For the latter purpose we are investigating the 5s2 1S0 → 5s5p 3P0 transition of In+. With a natural linewidth of only 1.1 Hz this resonance offers very high resolution and is highly immune to frequency shifts due to external electromagnetic fields, because it connects two levels with vanishing electronic magnetic momenta [1]. The wavelength of this clock transition is 236.5 nm and is technically very convenient, since it coincides with the fourth harmonic of the 946 nm Nd:YAG laser line. So this intrinsically frequency stable solid-state laser can be used to excite the transition [2]. For laser cooling and fluorescence detection of the indium ion the 5s2 1So -> 5s5p 3P1 transition at 230.6 nm can be employed. The use of the relatively narrow intercombination line for laser cooling allows us to study optical sideband cooling in the strong binding regime, where the oscillation frequencies of the ion in the trap (around 1 MHz) are larger than the optical linewidth of 360 kHz. In this parameter range laser cooling is possible to the quantum ground state of the vibrational motion in the trap corresponding to a temperature of roughly 100 μK. The same low temperature was obtained with sideband cooling of a small Coulomb crystal consisting of two ions, creating an interesting new quantum few-particle system.
Micromotion induced by the radio-frequency field contributes greatly to the systematic frequency shifts of optical frequency standards. Although different strategies for mitigating this effect have been proposed, trapping ions optically has the potential to provide a generic solution to the elimination of micromotion. This could be achieved by trapping a single ion in the dipole trap composed of a highpower laser field. Here, we present the setup of the dipole trap composed of a 532 nm laser at a power of 10 W aiming to optically trap a single 40Ca+ and we observe an AC-Stark shift of the fluorescence spectrum line of ∼22 MHz caused by the 532 nm dipole beam. The beam waist of the dipole laser is several microns, which would provide a dipole potential strong enough for all-optical trapping of a single 40Ca+ ion.
Coherently displaced number states of a harmonically bound ion can be coupled to two internal states of the ion by a laser-induced motional sideband interaction. The internal states can subsequently be read out in a projective measurement via state-dependent fluorescence, with near-unit fidelity. This leads to a rich set of line shapes when recording the internal-state excitation probability after a sideband excitation, as a function of the frequency detuning of the displacement drive with respect to the ion's motional frequency. We precisely characterize the coherent displacement based on the resulting line shapes, which exhibit sharp features that are useful for oscillator frequency determination from the single quantum regime up to very large coherent states with average occupation numbers of several hundred. We also introduce a technique based on multiple coherent displacements and free precession for characterizing noise on the trapping potential in the frequency range of 500 Hz–400 kHz. Signals from the ion are directly used to find and eliminate sources of technical noise in this typically unaccessed part of the spectrum.