Challenges
Datasets
Workspaces
Papers
Discussions
Leaderboard
Log inSign up
Challenges
Datasets
Workspaces
Papers
Discussions
Leaderboard
Blog
Job Board
Q3AS

© 2026 Aqora Quantum S.A.S.

TermsPrivacyLegal Notice

arXiv:2004.06765 · IEEE Transactions on Aerospace and Electronic Systems

Target Detection Aided by Quantum Temporal Correlations: Theoretical Analysis and Experimental Validation

Han Liu, Bhashyam Balaji, Amr S. Helmy

Published Feb 14, 2020• 19 citations
arXivHTMLPDF

Abstract

The detection of objects in the presence of significant background noise is a problem of fundamental interest in sensing. In this work, we theoretically analyze a prototype target detection protocol, the quantum temporal correlation (QTC) detection protocol, which is implemented in this work utilizing spontaneous parametric down-converted photon-pair sources. The QTC detection protocol only requires time-resolved photon-counting detection, which is phase-insensitive and therefore suitable for optical target detection. As a comparison to the QTC detection protocol, we also consider a classical phase-insensitive target detection protocol based on intensity detection that is practical in the optical regime. We formulated the target detection problem as a total probe photon transmission estimation problem and obtain an analytical expression of the receiver operating characteristic (ROC) curves. We carry out experiments using a semiconductor waveguide source, which we developed and previously reported. The experimental results agree very well with the theoretical prediction. In particular, we find that in a high-level environment noise and loss, the QTC detection protocol can achieve performance comparable to that of the classical protocol (that is practical in the optical regime) but with \(\simeq 57\) times lower detection time in terms of ROC curve metric. The performance of the QTC detection protocol experiment setup could be further improved with a higher transmission of the reference photon and better detector time uncertainty. Furthermore, the probe photons in the QTC detection protocol are completely indistinguishable from the background noise and therefore useful for covert ranging applications. Finally, our technological platform is highly scalable as well as tunable and thus amenable to large scale integration, which is necessary for practical applications.

DOI
10.1109/taes.2020.2974054

Related papers

Inspiring radar from quantum-enhanced lidar

Han Liu, Amr S. Helmy, Bhashyam Balaji

The detection of objects under large background conditions is a problem of fundamental interest in sensing. In this talk we theoretically analyze a prototype target detection protocol, the quantum time correlated (QTC) detection protocol, with spontaneous parametric down-converted photon-pair sources. The QTC detection protocol only requires time-resolved photon counting detection, which is phase-insensitive and therefore suitable for optical target detection. As a comparison to the QTC detection protocol we also consider a classical phase-insensitive target detection protocol based on intensity detection. We formulated the target detection problem as a total probe photon transmission estimation problem. We carry out experiments using a semiconductor waveguide source. The experimental results agree very well with the theoretical prediction. In particular, we find that in a high-level environment noise and loss, the QTC detection protocol is able to achieve comparable to the classical protocol target detection performance but with 10–100 fold lower required time on target detection in terms of ROC curve metric. The performance of the QTC detection experiment setup could be further improved with a higher transmission of the reference photon and better detector time uncertainty. Furthermore, unlike classical target detection and ranging protocol, the probe photons in our QTC detection protocol are completely indistinguishable from the background noise and therefore useful for covert ranging applications. Finally, our technological platform is highly scalable and tunable and thus amenable to large scale integration necessary for practical applications.

IEEE International Radar Conference•Apr 1, 2020•3 citations

Enhancing Classical Target Detection Performance Using Nonclassical Light

Han Liu, Amr S. Helmy

In this article, we demonstrate theoretically and experimentally how one can exploit correlations generated in monolithic semiconductor quantum light sources to enhance the performance of optical target detection. A prototype target detection protocol, the quantum time-correlation (QTC) detection protocol, with spontaneous parametric down-converted photon-pair sources, is discussed. The QTC protocol only requires time-resolved photon-counting detection, which is phase-insensitive and therefore suitable for optical target detection. As a comparison to the QTC detection protocol, we also consider a classical phase-insensitive target detection protocol based on intensity detection. We formulated the target detection problem as a probe light transmission estimation problem, and we quantify the target detection performance with the Fisher information criterion and the receiver operation characteristic analysis. Unlike classical target detection and ranging protocols, the probe photons in our QTC detection protocol are completely indistinguishable from the background noise and therefore useful for covert ranging applications. Finally, our technological platform is highly scalable and tunable and thus amenable to large scale integration necessary for practical applications.

arXiv:2004.06773•IEEE Aerospace and Electronic Systems Magazine•Apr 1, 2020•4 citations

Multidimensional quantum-enhanced target detection via spectrotemporal-correlation measurements

Yingwen Zhang, Duncan G. England, ANDREI NOMEROTSKI +4 more

In this work we investigate quantum-enhanced target detection in the presence of large background noise using multidimensional quantum correlations between photon pairs generated through spontaneous parametric down-conversion. Until now similar experiments have only utilized one of the photon pairs' many degrees of freedom such as temporal correlations and photon number correlations. Here, we utilized both temporal and spectral correlations of the photon pairs and achieved over an order of magnitude reduction to the background noise and in turn significant reduction to data acquisition time when compared to utilizing only temporal modes. We believe this work represents an important step in realizing a practical, real-time quantum-enhanced target detection system. The demonstrated technique will also be of importance in many other quantum sensing applications and quantum communications.

arXiv:1909.09664•Physical Review A•May 4, 2020•74 citations

Noise-tolerant object detection and ranging using quantum correlations

Hashir Kuniyil, Helin Ozel, Hasan Yılmaz +1 more

Abstract Imaging, detection and ranging of objects in the presence of significant background noise is a fundamental challenge in optical sensing. Overcoming the limitations imposed in conventional methods, quantum light sources show higher resistance against noise in a time-correlation-based quantum illumination. Here, we introduce the advantage of using not only time correlations but also polarization correlations in photon pairs in the detection of an object that is embedded in a noisy background. In this direction, a time- and polarization-correlated photon pair source using the spontaneous parametric down-conversion process is exploited. We found that the joint measurement of correlated pairs allows distinguishing the signal from the noise photons and that leads to an improved signal-to-noise ratio. Our comparative study revealed that using polarization correlations in addition to time correlations provides improved noise rejection. Furthermore, we show that polarization correlation allows undoing the detector limitation where high background often leads to detector saturation.

arXiv:2111.04062•Journal of Optics•Aug 15, 2022•9 citations

Comparison and limitations of quantum lidar in the single-photon regime

Anthony Drouin, Jean-Philippe Bourgoin, Sara Hosseini +3 more

Quantum lidar leverages the quantum properties of light to gain advantages over classical lidar, such as enhancing range accuracy and reducing the emitted optical power needed to detect a target. The low optical power makes quantum lidar especially attractive for minimizing the probability of being detected by an adversary. Various quantum sources have been considered for quantum lidar; however, a practical comparison between such widely different systems is challenging. Here, we develop a theoretical model tailored to quantum lidar for stealth ranging and imaging, and compare the performance of such systems using an attenuated pulsed laser, a quantum dot single-photon source, and a spontaneous parametric down-conversion correlated photon pair source. To ensure a fair comparison, all sources employ time correlations for detection and are equalized in terms of optical power and detectability by an adversary. Furthermore, we demonstrate the limitation of the signal-to-noise ratio (SNR) as a sole metric, as it ignores the acquisition time required to confidently identify a target. To address the limitation of SNR, we supplement this metric with receiver operating characteristic (ROC) curves. With the inclusion of ROC curves, we find that the pulsed laser and the quantum dot single-photon source outperform the correlated photon pair source when an adversary possesses a non-photon-number-resolving detector. In contrast, when facing a photon-number-resolving detector, the quantum dot single-photon source remains optimal while the correlated photon pair source outperforms the pulsed laser. Our findings demonstrate that the use of a correlated photon pair source for quantum lidar does not always outperform alternative sources with equal SNR and optical power. Finally, using ROC curves, we establish the practical range limitations of quantum lidar.

Optica Quantum•Sep 17, 2026•0 citations

Dynamic Target Detection and Tracking Based on Quantum Illumination LIDAR

Qinghai Li, Ziyi Zhao, Hao Wu +3 more

In the detection process of classic radars such as radar/lidar, the detection performance will be weakened due to the presence of background noise and loss. The quantum illumination protocol can use the spatial correlation between photon pairs to improve image quality and enhance radar detection performance, even in the presence of loss and noise. Based on this quantum illumination LIDAR, a theoretic scheme is developed for the detection and tracking of moving targets, and the trajectory of the object is analyzed. Illuminated by the quantum light source as Spontaneous Parametric Down-Conversion (SPDC), an opaque target can be identified from the background in the presence of strong noise. The static objects obtained by classical and quantum illumination are compared, respectively, and the advantages of quantum illumination are verified. The moving objects are taken at appropriate intervals to obtain the images of the moving objects, then the images are visualized as dynamic images, and the three-frame difference method is used to obtain the target contour. Finally, the image is performed by a series of processing on to obtain the trajectory of the target object. Several different motion situations are analyzed separately, and compared with the set object motion trajectory, which proves the effectiveness of the scheme. This scheme has potential practical application value.

Journal of quantum computing•Jan 1, 2021•1 citation
The detection of objects in the presence of significant background noise is a problem of fundamental interest in sensing. In this work, we theoretically analyze a prototype target detection protocol, the quantum temporal correlation (QTC) detection protocol, which is implemented in this work utilizing spontaneous parametric down-converted photon-pair sources. The QTC detection protocol only requires time-resolved photon-counting detection, which is phase-insensitive and therefore suitable for optical target detection. As a comparison to the QTC detection protocol, we also consider a classical phase-insensitive target detection protocol based on intensity detection that is practical in the optical regime. We formulated the target detection problem as a total probe photon transmission estimation problem and obtain an analytical expression of the receiver operating characteristic (ROC) curves. We carry out experiments using a semiconductor waveguide source, which we developed and previously reported. The experimental results agree very well with the theoretical prediction. In particular, we find that in a high-level environment noise and loss, the QTC detection protocol can achieve performance comparable to that of the classical protocol (that is practical in the optical regime) but with (\simeq 57) times lower detection time in terms of ROC curve metric. The performance of the QTC detection protocol experiment setup could be further improved with a higher transmission of the reference photon and better detector time uncertainty. Furthermore, the probe photons in the QTC detection protocol are completely indistinguishable from the background noise and therefore useful for covert ranging applications. Finally, our technological platform is highly scalable as well as tunable and thus amenable to large scale integration, which is necessary for practical applications.
The detection of objects under large background conditions is a problem of fundamental interest in sensing. In this talk we theoretically analyze a prototype target detection protocol, the quantum time correlated (QTC) detection protocol, with spontaneous parametric down-converted photon-pair sources. The QTC detection protocol only requires time-resolved photon counting detection, which is phase-insensitive and therefore suitable for optical target detection. As a comparison to the QTC detection protocol we also consider a classical phase-insensitive target detection protocol based on intensity detection. We formulated the target detection problem as a total probe photon transmission estimation problem. We carry out experiments using a semiconductor waveguide source. The experimental results agree very well with the theoretical prediction. In particular, we find that in a high-level environment noise and loss, the QTC detection protocol is able to achieve comparable to the classical protocol target detection performance but with 10–100 fold lower required time on target detection in terms of ROC curve metric. The performance of the QTC detection experiment setup could be further improved with a higher transmission of the reference photon and better detector time uncertainty. Furthermore, unlike classical target detection and ranging protocol, the probe photons in our QTC detection protocol are completely indistinguishable from the background noise and therefore useful for covert ranging applications. Finally, our technological platform is highly scalable and tunable and thus amenable to large scale integration necessary for practical applications.
In this article, we demonstrate theoretically and experimentally how one can exploit correlations generated in monolithic semiconductor quantum light sources to enhance the performance of optical target detection. A prototype target detection protocol, the quantum time-correlation (QTC) detection protocol, with spontaneous parametric down-converted photon-pair sources, is discussed. The QTC protocol only requires time-resolved photon-counting detection, which is phase-insensitive and therefore suitable for optical target detection. As a comparison to the QTC detection protocol, we also consider a classical phase-insensitive target detection protocol based on intensity detection. We formulated the target detection problem as a probe light transmission estimation problem, and we quantify the target detection performance with the Fisher information criterion and the receiver operation characteristic analysis. Unlike classical target detection and ranging protocols, the probe photons in our QTC detection protocol are completely indistinguishable from the background noise and therefore useful for covert ranging applications. Finally, our technological platform is highly scalable and tunable and thus amenable to large scale integration necessary for practical applications.
In this work we investigate quantum-enhanced target detection in the presence of large background noise using multidimensional quantum correlations between photon pairs generated through spontaneous parametric down-conversion. Until now similar experiments have only utilized one of the photon pairs' many degrees of freedom such as temporal correlations and photon number correlations. Here, we utilized both temporal and spectral correlations of the photon pairs and achieved over an order of magnitude reduction to the background noise and in turn significant reduction to data acquisition time when compared to utilizing only temporal modes. We believe this work represents an important step in realizing a practical, real-time quantum-enhanced target detection system. The demonstrated technique will also be of importance in many other quantum sensing applications and quantum communications.
Abstract Imaging, detection and ranging of objects in the presence of significant background noise is a fundamental challenge in optical sensing. Overcoming the limitations imposed in conventional methods, quantum light sources show higher resistance against noise in a time-correlation-based quantum illumination. Here, we introduce the advantage of using not only time correlations but also polarization correlations in photon pairs in the detection of an object that is embedded in a noisy background. In this direction, a time- and polarization-correlated photon pair source using the spontaneous parametric down-conversion process is exploited. We found that the joint measurement of correlated pairs allows distinguishing the signal from the noise photons and that leads to an improved signal-to-noise ratio. Our comparative study revealed that using polarization correlations in addition to time correlations provides improved noise rejection. Furthermore, we show that polarization correlation allows undoing the detector limitation where high background often leads to detector saturation.
Quantum lidar leverages the quantum properties of light to gain advantages over classical lidar, such as enhancing range accuracy and reducing the emitted optical power needed to detect a target. The low optical power makes quantum lidar especially attractive for minimizing the probability of being detected by an adversary. Various quantum sources have been considered for quantum lidar; however, a practical comparison between such widely different systems is challenging. Here, we develop a theoretical model tailored to quantum lidar for stealth ranging and imaging, and compare the performance of such systems using an attenuated pulsed laser, a quantum dot single-photon source, and a spontaneous parametric down-conversion correlated photon pair source. To ensure a fair comparison, all sources employ time correlations for detection and are equalized in terms of optical power and detectability by an adversary. Furthermore, we demonstrate the limitation of the signal-to-noise ratio (SNR) as a sole metric, as it ignores the acquisition time required to confidently identify a target. To address the limitation of SNR, we supplement this metric with receiver operating characteristic (ROC) curves. With the inclusion of ROC curves, we find that the pulsed laser and the quantum dot single-photon source outperform the correlated photon pair source when an adversary possesses a non-photon-number-resolving detector. In contrast, when facing a photon-number-resolving detector, the quantum dot single-photon source remains optimal while the correlated photon pair source outperforms the pulsed laser. Our findings demonstrate that the use of a correlated photon pair source for quantum lidar does not always outperform alternative sources with equal SNR and optical power. Finally, using ROC curves, we establish the practical range limitations of quantum lidar.
In the detection process of classic radars such as radar/lidar, the detection performance will be weakened due to the presence of background noise and loss. The quantum illumination protocol can use the spatial correlation between photon pairs to improve image quality and enhance radar detection performance, even in the presence of loss and noise. Based on this quantum illumination LIDAR, a theoretic scheme is developed for the detection and tracking of moving targets, and the trajectory of the object is analyzed. Illuminated by the quantum light source as Spontaneous Parametric Down-Conversion (SPDC), an opaque target can be identified from the background in the presence of strong noise. The static objects obtained by classical and quantum illumination are compared, respectively, and the advantages of quantum illumination are verified. The moving objects are taken at appropriate intervals to obtain the images of the moving objects, then the images are visualized as dynamic images, and the three-frame difference method is used to obtain the target contour. Finally, the image is performed by a series of processing on to obtain the trajectory of the target object. Several different motion situations are analyzed separately, and compared with the set object motion trajectory, which proves the effectiveness of the scheme. This scheme has potential practical application value.