Challenges
Datasets
Workspaces
Papers
Discussions
Leaderboard
Log inSign up
Challenges
Datasets
Workspaces
Papers
Discussions
Leaderboard
Blog
Job Board
Q3AS

© 2026 Aqora Quantum S.A.S.

TermsPrivacyLegal Notice

arXiv:2003.08085 · Advanced Quantum Technologies

2D Linear Trap Array for Quantum Information Processing

Philip C. Holz, Silke Auchter, Gerald Stocker, Marco Valentini, Kirill Lakhmanskiy, Clemens Rössler, Paul Stampfer, Sokratis Sgouridis, Elmar Aschauer, Yves Colombe, R. Blatt

Published Sep 16, 2020• 39 citations
arXivHTMLPDF

Abstract

Abstract An ion‐lattice quantum processor based on a two‐dimensional arrangement of linear surface traps is presented. The design features a tunable coupling between ions in adjacent lattice sites and a configurable ion‐lattice connectivity, allowing one, for example, to realize rectangular and triangular lattices with the same trap chip. Detailed trap simulations of a simplest‐instance ion array with 2 × 9 trapping sites are presented and the fabrication of a prototype device in an industrial facility is reported on. The design and the employed fabrication processes are scalable to larger array sizes. Trapping of ions in rectangular and triangular lattices and transport of a 2 × 2 ion‐lattice over one lattice period are demonstrated.

DOI
10.1002/qute.202000031

Related papers

Demonstration of Two-Dimensional Connectivity for a Scalable Error-Corrected Ion-Trap Quantum Processor Architecture

Marco Valentini, Martin W. van Mourik, Friederike Butt +12 more

A major hurdle for building a large-scale quantum computer is increasing the number of qubits while maintaining connectivity between them. In trapped-ion devices, this connectivity can be achieved by moving subregisters consisting of a few ions across the processor. Here, we focus on an architecture, which we refer to as the quantum spring array (QSA), that is based on a rectangular two-dimensional lattice of linear strings of ions. Connectivity between adjacent ion strings can be controlled by adjusting their separation. This requires control of trapping potentials along two directions, one along the axis of the ion string and one radial to it. In this work, we investigate key elements of the QSA architecture along both directions: We show that the coupling rate between neighboring lattice sites increases with the number of ions per site and the motion of the coupled system can be resilient to electrical noise, both being key requisites for fast and high-fidelity quantum gate operations. The coherence of the coupling is assessed and an entangling gate between qubits stored in radially separated trapping regions is demonstrated. Moreover, we demonstrate control over radio-frequency signals to adjust the radial separation, and thus the coupling rate, between strings. We further present constructions for the implementation of parallelized, transversal gate operations, and map the QSA architecture to code primitives for fault-tolerant quantum error correction, providing a step towards a quantum processor architecture that is optimized for large-scale operation.

arXiv:2406.02406•Physical Review X•Nov 6, 2025•21 citations

Planar ion chip design for scalable quantum information processing

Jinyin Wan, Wang Yu-Zhu, Liang Liu

We investigate a planar ion chip design with a two-dimensional array of linear ion traps for scalable quantum information processing. Qubits are formed from the internal electronic states of trapped 40 Ca + ions. The segmented electrodes reside in a single plane on a substrate and a grounded metal plate separately, a combination of appropriate rf and DC potentials is applied to them for stable ion confinement. Every two adjacent electrodes can generate a linear ion trap in and between the electrodes above the chip at a distance dependent on the geometrical scale and other considerations. The potential distributions are calculated by using a static electric field qualitatively. This architecture provides a conceptually simple avenue to achieving the microfabrication and large-scale quantum computation based on the arrays of trapped ions.

Chinese Physics B•Oct 1, 2008•4 citations

Demonstration of transport in an ion trap design for two-dimensional lattices

Michael Pfeifer, Marco Valentini, Matthias Dietl +7 more

Microfabricated ion trap chips are at the core of some of the most advanced quantum computers. How a large number of ions is arranged and controlled on an ion trap chip depends on the chosen trap architecture. One such architecture is the quantum spring array (QSA). In the QSA architecture, ion chains are arranged in a two-dimensional lattice and interact with ion chains in neighboring sites in the radial and axial directions of the respective chain. This interaction, or coupling, is mediated by the Coulomb force while keeping ions in separate trapping sites, and scales inversely with the third power of the separation. The capability to control the distance between ions in the lattice is thus essential. In previous works, the radial separation between ions was tuned by controlling the rf pseudo-potential, which revealed to be experimentally challenging to realize while maintaining low heating rates. In this work, we present an ion trap chip design that allows tuning of the radial distance between ions using only dc voltages. The radial transport is executed between different interaction zones, designated for quantum operations, through specifically designed transition zones. A prototype of this type of ion trap chip was microfabricated on fused silica substrate. Its functionality is characterized by demonstrating dc-controlled radial transport of a single ion through a transition zone and measuring stray fields and ion heating rates in the center of the trap. Moreover, the fabrication of a multi-metal layer version of such a trap is presented as a scaling path for the presented chip design.

quant-pharXiv:2605.16543•May 19, 2026•0 citations

Interference in a Prototype of a Two-Dimensional Ion Trap Array Quantum Simulator

Frederick Hakelberg, Philip Kiefer, Matthias Wittemer +2 more

Trapped ions are a promising platform for envisioned quantum simulators, with outstanding results in one-dimensional ion crystals. However, theory requires not only interactions at long range, but also higher dimensionality. We operate a basic triangular array of three individually trapped ions based on scalable microfabrication technology. We demonstrate coherent coupling, tunable in real time and enabling interference in 2D, an essential building block for a reconfigurable quantum simulator. Mitigating motional heating will permit accessing the quantum regime and 2D experimental quantum simulations.

arXiv:1812.08552•Physical Review Letters•Sep 5, 2019•32 citations

Optimization of two-dimensional ion trap arrays for quantum simulation

James Siverns, Sebastian Weidt, Kim Lake +3 more

The optimization of two-dimensional (2D) lattice ion trap geometries for trapped ion quantum simulation is investigated. The geometry is optimized for the highest ratio of ion–ion interaction rate to decoherence rate. To calculate the electric field of such array geometries a numerical simulation based on a 'Biot–Savart like law' method is used. In this article we will focus on square, hexagonal and centre rectangular lattices for optimization. A method for maximizing the homogeneity of trapping site properties over an array is presented for arrays of a range of sizes. We show how both the polygon radii and separations scale to optimize the ratio between the interaction and decoherence rate. The optimal polygon radius and separation for a 2D lattice is found to be a function of the ratio between radio-frequency (rf) voltage and drive frequency applied to the array. We then provide a case study for 171 Yb + ions to show how a 2D quantum simulator array could be designed.

arXiv:1203.4277•New Journal of Physics•Aug 14, 2012•12 citations

Microfabrication of an 8-qubit processor chip for a trapped-ion quantum computer demonstrator

Nila Krishnakumar, F. J. Giebel, Eike Iseke +8 more

Multilayer surface-electrode ion traps provide a scalable platform for quantum processors. In this paper we present a demonstrator chip designed to implement an 8-qubit shuttling-based quantum processor with chip-integrated microwave control for quantum gates. The design is based on a linear Paul trap geometry. All-to-all connectivity will be implemented through ion swapping. The production of the trap chip is carried out with multistep microfabrication. The 2-layer ion trap chip with two storage registers and an interaction zone has a size of 5 mm x 10 mm . Flexibility in signal routing is improved through the use of thick and planarised metal–dielectric layers. • Fabrication of multilayer asymmetric ion trap chip aiming to enable an 8-qubit quantum computer. • Brief insight into the linear trap chip design with quantum charged-coupled device architecture. • Wafer level multistep microfabrication procedure of the chip production. • Chip characterisation with respect to the target design features and trapping readiness.

Micro and Nano Engineering•Nov 11, 2025•1 citation
Abstract An ion‐lattice quantum processor based on a two‐dimensional arrangement of linear surface traps is presented. The design features a tunable coupling between ions in adjacent lattice sites and a configurable ion‐lattice connectivity, allowing one, for example, to realize rectangular and triangular lattices with the same trap chip. Detailed trap simulations of a simplest‐instance ion array with 2 × 9 trapping sites are presented and the fabrication of a prototype device in an industrial facility is reported on. The design and the employed fabrication processes are scalable to larger array sizes. Trapping of ions in rectangular and triangular lattices and transport of a 2 × 2 ion‐lattice over one lattice period are demonstrated.
A major hurdle for building a large-scale quantum computer is increasing the number of qubits while maintaining connectivity between them. In trapped-ion devices, this connectivity can be achieved by moving subregisters consisting of a few ions across the processor. Here, we focus on an architecture, which we refer to as the quantum spring array (QSA), that is based on a rectangular two-dimensional lattice of linear strings of ions. Connectivity between adjacent ion strings can be controlled by adjusting their separation. This requires control of trapping potentials along two directions, one along the axis of the ion string and one radial to it. In this work, we investigate key elements of the QSA architecture along both directions: We show that the coupling rate between neighboring lattice sites increases with the number of ions per site and the motion of the coupled system can be resilient to electrical noise, both being key requisites for fast and high-fidelity quantum gate operations. The coherence of the coupling is assessed and an entangling gate between qubits stored in radially separated trapping regions is demonstrated. Moreover, we demonstrate control over radio-frequency signals to adjust the radial separation, and thus the coupling rate, between strings. We further present constructions for the implementation of parallelized, transversal gate operations, and map the QSA architecture to code primitives for fault-tolerant quantum error correction, providing a step towards a quantum processor architecture that is optimized for large-scale operation.
We investigate a planar ion chip design with a two-dimensional array of linear ion traps for scalable quantum information processing. Qubits are formed from the internal electronic states of trapped 40 Ca + ions. The segmented electrodes reside in a single plane on a substrate and a grounded metal plate separately, a combination of appropriate rf and DC potentials is applied to them for stable ion confinement. Every two adjacent electrodes can generate a linear ion trap in and between the electrodes above the chip at a distance dependent on the geometrical scale and other considerations. The potential distributions are calculated by using a static electric field qualitatively. This architecture provides a conceptually simple avenue to achieving the microfabrication and large-scale quantum computation based on the arrays of trapped ions.
Microfabricated ion trap chips are at the core of some of the most advanced quantum computers. How a large number of ions is arranged and controlled on an ion trap chip depends on the chosen trap architecture. One such architecture is the quantum spring array (QSA). In the QSA architecture, ion chains are arranged in a two-dimensional lattice and interact with ion chains in neighboring sites in the radial and axial directions of the respective chain. This interaction, or coupling, is mediated by the Coulomb force while keeping ions in separate trapping sites, and scales inversely with the third power of the separation. The capability to control the distance between ions in the lattice is thus essential. In previous works, the radial separation between ions was tuned by controlling the rf pseudo-potential, which revealed to be experimentally challenging to realize while maintaining low heating rates. In this work, we present an ion trap chip design that allows tuning of the radial distance between ions using only dc voltages. The radial transport is executed between different interaction zones, designated for quantum operations, through specifically designed transition zones. A prototype of this type of ion trap chip was microfabricated on fused silica substrate. Its functionality is characterized by demonstrating dc-controlled radial transport of a single ion through a transition zone and measuring stray fields and ion heating rates in the center of the trap. Moreover, the fabrication of a multi-metal layer version of such a trap is presented as a scaling path for the presented chip design.
Trapped ions are a promising platform for envisioned quantum simulators, with outstanding results in one-dimensional ion crystals. However, theory requires not only interactions at long range, but also higher dimensionality. We operate a basic triangular array of three individually trapped ions based on scalable microfabrication technology. We demonstrate coherent coupling, tunable in real time and enabling interference in 2D, an essential building block for a reconfigurable quantum simulator. Mitigating motional heating will permit accessing the quantum regime and 2D experimental quantum simulations.
The optimization of two-dimensional (2D) lattice ion trap geometries for trapped ion quantum simulation is investigated. The geometry is optimized for the highest ratio of ion–ion interaction rate to decoherence rate. To calculate the electric field of such array geometries a numerical simulation based on a 'Biot–Savart like law' method is used. In this article we will focus on square, hexagonal and centre rectangular lattices for optimization. A method for maximizing the homogeneity of trapping site properties over an array is presented for arrays of a range of sizes. We show how both the polygon radii and separations scale to optimize the ratio between the interaction and decoherence rate. The optimal polygon radius and separation for a 2D lattice is found to be a function of the ratio between radio-frequency (rf) voltage and drive frequency applied to the array. We then provide a case study for 171 Yb + ions to show how a 2D quantum simulator array could be designed.
Multilayer surface-electrode ion traps provide a scalable platform for quantum processors. In this paper we present a demonstrator chip designed to implement an 8-qubit shuttling-based quantum processor with chip-integrated microwave control for quantum gates. The design is based on a linear Paul trap geometry. All-to-all connectivity will be implemented through ion swapping. The production of the trap chip is carried out with multistep microfabrication. The 2-layer ion trap chip with two storage registers and an interaction zone has a size of 5 mm x 10 mm . Flexibility in signal routing is improved through the use of thick and planarised metal–dielectric layers. • Fabrication of multilayer asymmetric ion trap chip aiming to enable an 8-qubit quantum computer. • Brief insight into the linear trap chip design with quantum charged-coupled device architecture. • Wafer level multistep microfabrication procedure of the chip production. • Chip characterisation with respect to the target design features and trapping readiness.