Challenges
Datasets
Workspaces
Papers
Discussions
Leaderboard
Log inSign up
Challenges
Datasets
Workspaces
Papers
Discussions
Leaderboard
Blog
Job Board
Q3AS

© 2026 Aqora Quantum S.A.S.

TermsPrivacyLegal Notice

arXiv:2002.08925 · Nature Communications

Electron cascade for distant spin readout

Cornelis Jacobus van Diepen, Tzu-Kan Hsiao, U. Mukhopadhyay, Christian Reichl, W. Wegscheider, Lieven M. K. Vandersypen

Published Jan 4, 2021• 26 citations
arXivHTMLPDF

Abstract

The spin of a single electron in a semiconductor quantum dot provides a well-controlled and long-lived qubit implementation. The electron charge in turn allows control of the position of individual electrons in a quantum dot array, and enables charge sensors to probe the charge configuration. Here we show that the Coulomb repulsion allows an initial charge transition to induce subsequent charge transitions, inducing a cascade of electron hops, like toppling dominoes. A cascade can transmit information along a quantum dot array over a distance that extends by far the effect of the direct Coulomb repulsion. We demonstrate that a cascade of electrons can be combined with Pauli spin blockade to read out distant spins and show results with potential for high fidelity using a remote charge sensor in a quadruple quantum dot device. We implement and analyse several operating modes for cascades and analyse their scaling behaviour. We also discuss the application of cascade-based spin readout to densely-packed two-dimensional quantum dot arrays with charge sensors placed at the periphery. The high connectivity of such arrays greatly improves the capabilities of quantum dot systems for quantum computation and simulation.

DOI
10.1038/s41467-020-20388-6

Related papers

Radio-frequency electron cascade in semiconductor quantum dots

Tara Murphy, Lorenzo Peri, Giovanni A. Oakes +8 more

Electron cotunneling in semiconductor quantum dots is a higher-order tunneling mechanism that connects initial and final charge states through energetically inaccessible virtual intermediate configurations. In quantum-dot arrays, such processes can produce simultaneous charge motion across multiple tunnel junctions and enable transitions that would otherwise be suppressed by Coulomb blockade. Here, building on an earlier proof-of-principle demonstration, we investigate radio-frequency (rf)-driven correlated cotunneling and its application to dispersive quantum-dot readout. Using both theoretical modeling and experimental measurements in two different foundry-fabricated silicon devices, we show that an external rf drive can induce correlated cyclic single-electron transitions, resulting in enhanced charge-polarization of the system. We develop a general theoretical framework for rf electron-cascade readout, which exploits cotunneling events in quantum-dot systems with three or more dots to produce a relative signal enhancement, and extend its experimental demonstration to a gate-sensed device architecture. Our results establish the operating principles of rf electron-cascade readout and provide a route to increased dispersive readout fidelity in semiconductor quantum computing architectures.

cond-mat.mes-hallCross-listedarXiv:2610.05206•Oct 6, 2026•0 citations

Combining multiplexed gate-based readout and isolated CMOS quantum dot arrays

Pierre Hamonic, Martin Nurizzo, Jayshankar Nath +15 more

Semiconductor quantum dot arrays are a promising platform to perform spin-based error-corrected quantum computation with large numbers of qubits. However, due to the diverging number of possible charge configurations combined with the limited sensitivity of large-footprint charge sensors, achieving single-spin occupancy in each dot in a growing quantum dot array is exceedingly complex. Therefore, to scale-up a spin-based architecture we must change how individual charges are readout and controlled. Here, we demonstrate single-spin occupancy of each dot in a foundry-fabricated array by combining two methods. 1/ Loading a finite number of electrons into the quantum dot array; simplifying electrostatic tuning by isolating the array from the reservoirs. 2/ Deploying multiplex gate-based reflectometry to dispersively probe charge tunneling and spin states without charge sensors or reservoirs. Our isolated arrays probed by embedded multiplex readout can be readily electrostatically tuned. They are thus a viable, scalable approach for spin-based quantum architectures. Large-footprint, low-sensitivity charge sensors hinder scaling semiconductor quantum dot arrays for quantum computation. Here the authors present a potentially scalable approach using multiplexed gate-based readout and operation in a foundry-fabricated quantum dot array, demonstrating single-electron occupancy.

arXiv:2410.02325•Nature Communications•Jul 9, 2025•7 citations

Real-Time Feedback Control of Charge Sensing for Quantum Dot Qubits

Takashi Nakajima, Yohei Kojima, Yoshihiro Uehara +4 more

Measuring electrical charge with single-electron resolution is essential for implementing spin qubits in semiconductor quantum dots. Applying quantum dot charge sensors in larger-scale quantum computing devices is being held back because these sensors are easily affected by environmental disturbances, and thus require elaborate tune-up. This study uses a feedback control circuit implemented on a field-programmable gate array to maintain sensor performance in the face of capacitive crosstalk and charge noise. The technique enables rapid tune-up of quantum dot devices and reliable single-shot electron or spin measurement, and will advance the development of large-scale spin-qubit devices.

arXiv:2103.15258•Physical Review Applied•Mar 26, 2021•28 citations

Improved Single-Shot Qubit Readout Using Twin rf-SET Charge Correlations

Santiago Serrano, MengKe Feng, Wee Han Lim +11 more

High-fidelity qubit readout is critical in order to obtain the thresholds needed to implement quantum error-correction protocols and achieve fault-tolerant quantum computing. Large-scale silicon qubit devices will have densely packed arrays of quantum dots with multiple charge sensors that are, on average, farther away from the quantum dots, entailing a reduction in readout fidelities. Here, we present a readout technique that enhances the readout fidelity in a linear SiMOS four-dot array by amplifying correlations between a pair of single-electron transistors, known as a twin SET. By recording and subsequently correlating the twin SET traces as we modulate the dot detuning across a charge transition, we demonstrate a reduction in the charge readout infidelity by over one order of magnitude compared to traditional readout methods. We also study the spin-to-charge conversion errors introduced by the modulation technique and conclude that faster modulation frequencies avoid relaxation-induced errors without introducing significant spin-flip errors, favoring the use of the technique at short integration times. This method not only allows for faster and higher-fidelity qubit measurements but it also enhances the signal corresponding to charge transitions that take place farther away from the sensors, enabling a way to circumvent the reduction in readout fidelities in large arrays of qubits. Published by the American Physical Society 2024

arXiv:2307.07724•PRX Quantum•Jan 3, 2024•9 citations

Scalable Control and Measurement of Gate-Defined Quantum Dot Systems

James Colless

There is currently a worldwide effort towards the realisation of large-scale quantum computers that exploit quantum phenomena for information processing. While these computing systems could potentially redefine the technological landscape, harnessing quantum effects is challenging due to their inherently fragile nature and the experimentally demanding environments in which they arise. In order for quantum computation to be viable it is first necessary to demonstrate the operation of two-level quantum systems (qubits) which have long coherence times, can be quickly read out, and can be controlled with high fidelity. Focusing on these key requirements, this thesis presents four experiments towards scalable solid state quantum computing using gate-defined quantum dot devices based on gallium arsenide (GaAs) heterostructures. The first experiment investigates a phonon emission process that limits the charge coherence in GaAs and potentially complicates the microwave control of multi-qubit devices. We show that this microwave analogy to Raman spectroscopy can provide a means of detecting the unique phonon spectral density created by a nanoscale device. Experimental results are compared to a theoretical model based on a non-Markovian master equation and approaches to suppressing electron-phonon coupling are discussed. The second experiment demonstrates a technique involving in-situ gate electrodes coupled to lumped-element resonators to provide high-bandwidth dispersive read-out of the state of a double quantum dot. We characterise the charge sensitivity of this method in the few-electron regime and benchmark its performance against quantum point contact charge sensors. The third experiment implements a low-loss, chip-level frequency multiplexing scheme for the readout of scaled-up spin qubit arrays. Dispersive gate-sensing is realised in combination with charge detection based on two radio frequency quantum point contacts to perform multiplexed readout of a double quantum dot in the few-electron regime. Demonstration of a 10-channel multiplexing device is achieved and limitations in scaling spin qubit readout to large numbers using multiplexed channels discussed. The final experiment ties previously presented results together by realising a micro-architecture for controlling and reading out qubits during the execution of a quantum algorithm. The basic principles of this architecture are demonstrated via the manipulation of a semiconductor qubit using control pulses that are cryogenically routed using a high-electron mobility transistor switching matrix controlled by a field programmable gate array. Finally, several technical results are also presented including the development of printed circuit board solutions to allow the high-frequency measurement of nanoscale devices at cryogenic temperatures and the design of on-chip interconnects used to suppress electromagnetic crosstalk in high-density spin qubit device architectures.

•Oct 10, 2016•0 citations

Spin-dependent localization of electrons in quadruple quantum dots

A Kwaśniowski, Janusz Adamowski

An all electrical manipulation with singlet and triplet states of an electron pair in a quadruple quantum dot (QD) has been studied by a configuration interaction method. We have investigated two nanodevices that consist of four weakly coupled lateral QDs, in which the electron localization can be changed by tuning the external voltages: the gate voltage in the first nanodevice and the source-drain voltage in the second. The electrons that---in the initial state---singly occupy the two identical input QDs are transferred to the two asymmetric output QDs by the sufficiently high electric field. We have shown that---for the QDs with suitably chosen parameters---the localization of the electrons in the output QDs depends on the spin states of the electron pair and the final spin state can be uniquely determined by a single-shot measurement of the electric charge gathered in only one of the output QDs. This leads to a possibility of performing the controlled operations on the electron-spin qubits in the quadruple QDs. We have found that the classical exclusive OR (XOR) logic gate can be performed with the electric field-induced transitions and the output read out by the spin-to-charge conversion.

Physical Review B•Dec 7, 2010•6 citations
The spin of a single electron in a semiconductor quantum dot provides a well-controlled and long-lived qubit implementation. The electron charge in turn allows control of the position of individual electrons in a quantum dot array, and enables charge sensors to probe the charge configuration. Here we show that the Coulomb repulsion allows an initial charge transition to induce subsequent charge transitions, inducing a cascade of electron hops, like toppling dominoes. A cascade can transmit information along a quantum dot array over a distance that extends by far the effect of the direct Coulomb repulsion. We demonstrate that a cascade of electrons can be combined with Pauli spin blockade to read out distant spins and show results with potential for high fidelity using a remote charge sensor in a quadruple quantum dot device. We implement and analyse several operating modes for cascades and analyse their scaling behaviour. We also discuss the application of cascade-based spin readout to densely-packed two-dimensional quantum dot arrays with charge sensors placed at the periphery. The high connectivity of such arrays greatly improves the capabilities of quantum dot systems for quantum computation and simulation.
Electron cotunneling in semiconductor quantum dots is a higher-order tunneling mechanism that connects initial and final charge states through energetically inaccessible virtual intermediate configurations. In quantum-dot arrays, such processes can produce simultaneous charge motion across multiple tunnel junctions and enable transitions that would otherwise be suppressed by Coulomb blockade. Here, building on an earlier proof-of-principle demonstration, we investigate radio-frequency (rf)-driven correlated cotunneling and its application to dispersive quantum-dot readout. Using both theoretical modeling and experimental measurements in two different foundry-fabricated silicon devices, we show that an external rf drive can induce correlated cyclic single-electron transitions, resulting in enhanced charge-polarization of the system. We develop a general theoretical framework for rf electron-cascade readout, which exploits cotunneling events in quantum-dot systems with three or more dots to produce a relative signal enhancement, and extend its experimental demonstration to a gate-sensed device architecture. Our results establish the operating principles of rf electron-cascade readout and provide a route to increased dispersive readout fidelity in semiconductor quantum computing architectures.
Semiconductor quantum dot arrays are a promising platform to perform spin-based error-corrected quantum computation with large numbers of qubits. However, due to the diverging number of possible charge configurations combined with the limited sensitivity of large-footprint charge sensors, achieving single-spin occupancy in each dot in a growing quantum dot array is exceedingly complex. Therefore, to scale-up a spin-based architecture we must change how individual charges are readout and controlled. Here, we demonstrate single-spin occupancy of each dot in a foundry-fabricated array by combining two methods. 1/ Loading a finite number of electrons into the quantum dot array; simplifying electrostatic tuning by isolating the array from the reservoirs. 2/ Deploying multiplex gate-based reflectometry to dispersively probe charge tunneling and spin states without charge sensors or reservoirs. Our isolated arrays probed by embedded multiplex readout can be readily electrostatically tuned. They are thus a viable, scalable approach for spin-based quantum architectures. Large-footprint, low-sensitivity charge sensors hinder scaling semiconductor quantum dot arrays for quantum computation. Here the authors present a potentially scalable approach using multiplexed gate-based readout and operation in a foundry-fabricated quantum dot array, demonstrating single-electron occupancy.
Measuring electrical charge with single-electron resolution is essential for implementing spin qubits in semiconductor quantum dots. Applying quantum dot charge sensors in larger-scale quantum computing devices is being held back because these sensors are easily affected by environmental disturbances, and thus require elaborate tune-up. This study uses a feedback control circuit implemented on a field-programmable gate array to maintain sensor performance in the face of capacitive crosstalk and charge noise. The technique enables rapid tune-up of quantum dot devices and reliable single-shot electron or spin measurement, and will advance the development of large-scale spin-qubit devices.
High-fidelity qubit readout is critical in order to obtain the thresholds needed to implement quantum error-correction protocols and achieve fault-tolerant quantum computing. Large-scale silicon qubit devices will have densely packed arrays of quantum dots with multiple charge sensors that are, on average, farther away from the quantum dots, entailing a reduction in readout fidelities. Here, we present a readout technique that enhances the readout fidelity in a linear SiMOS four-dot array by amplifying correlations between a pair of single-electron transistors, known as a twin SET. By recording and subsequently correlating the twin SET traces as we modulate the dot detuning across a charge transition, we demonstrate a reduction in the charge readout infidelity by over one order of magnitude compared to traditional readout methods. We also study the spin-to-charge conversion errors introduced by the modulation technique and conclude that faster modulation frequencies avoid relaxation-induced errors without introducing significant spin-flip errors, favoring the use of the technique at short integration times. This method not only allows for faster and higher-fidelity qubit measurements but it also enhances the signal corresponding to charge transitions that take place farther away from the sensors, enabling a way to circumvent the reduction in readout fidelities in large arrays of qubits. Published by the American Physical Society 2024
There is currently a worldwide effort towards the realisation of large-scale quantum computers that exploit quantum phenomena for information processing. While these computing systems could potentially redefine the technological landscape, harnessing quantum effects is challenging due to their inherently fragile nature and the experimentally demanding environments in which they arise. In order for quantum computation to be viable it is first necessary to demonstrate the operation of two-level quantum systems (qubits) which have long coherence times, can be quickly read out, and can be controlled with high fidelity. Focusing on these key requirements, this thesis presents four experiments towards scalable solid state quantum computing using gate-defined quantum dot devices based on gallium arsenide (GaAs) heterostructures. The first experiment investigates a phonon emission process that limits the charge coherence in GaAs and potentially complicates the microwave control of multi-qubit devices. We show that this microwave analogy to Raman spectroscopy can provide a means of detecting the unique phonon spectral density created by a nanoscale device. Experimental results are compared to a theoretical model based on a non-Markovian master equation and approaches to suppressing electron-phonon coupling are discussed. The second experiment demonstrates a technique involving in-situ gate electrodes coupled to lumped-element resonators to provide high-bandwidth dispersive read-out of the state of a double quantum dot. We characterise the charge sensitivity of this method in the few-electron regime and benchmark its performance against quantum point contact charge sensors. The third experiment implements a low-loss, chip-level frequency multiplexing scheme for the readout of scaled-up spin qubit arrays. Dispersive gate-sensing is realised in combination with charge detection based on two radio frequency quantum point contacts to perform multiplexed readout of a double quantum dot in the few-electron regime. Demonstration of a 10-channel multiplexing device is achieved and limitations in scaling spin qubit readout to large numbers using multiplexed channels discussed. The final experiment ties previously presented results together by realising a micro-architecture for controlling and reading out qubits during the execution of a quantum algorithm. The basic principles of this architecture are demonstrated via the manipulation of a semiconductor qubit using control pulses that are cryogenically routed using a high-electron mobility transistor switching matrix controlled by a field programmable gate array. Finally, several technical results are also presented including the development of printed circuit board solutions to allow the high-frequency measurement of nanoscale devices at cryogenic temperatures and the design of on-chip interconnects used to suppress electromagnetic crosstalk in high-density spin qubit device architectures.
An all electrical manipulation with singlet and triplet states of an electron pair in a quadruple quantum dot (QD) has been studied by a configuration interaction method. We have investigated two nanodevices that consist of four weakly coupled lateral QDs, in which the electron localization can be changed by tuning the external voltages: the gate voltage in the first nanodevice and the source-drain voltage in the second. The electrons that---in the initial state---singly occupy the two identical input QDs are transferred to the two asymmetric output QDs by the sufficiently high electric field. We have shown that---for the QDs with suitably chosen parameters---the localization of the electrons in the output QDs depends on the spin states of the electron pair and the final spin state can be uniquely determined by a single-shot measurement of the electric charge gathered in only one of the output QDs. This leads to a possibility of performing the controlled operations on the electron-spin qubits in the quadruple QDs. We have found that the classical exclusive OR (XOR) logic gate can be performed with the electric field-induced transitions and the output read out by the spin-to-charge conversion.