Challenges
Datasets
Workspaces
Papers
Discussions
Leaderboard
Log inSign up
Challenges
Datasets
Workspaces
Papers
Discussions
Leaderboard
Blog
Job Board
Q3AS

© 2026 Aqora Quantum S.A.S.

TermsPrivacyLegal Notice

arXiv:2001.07759 · Journal of Physics B Atomic Molecular and Optical Physics

Buffer-gas cooling of molecules in the low-density regime: comparison between simulation and experiment

Thomas Gantner, Manuel Koller, Xing Wu, Gerhard Rempe, Martin Zeppenfeld

Published Apr 20, 2020• 18 citations
arXivHTMLPDF

Abstract

Abstract Cryogenic buffer gas cells have been a workhorse for the cooling of molecules in the last few decades. The straightforward sympathetic cooling principle makes them applicable to a huge variety of different species. Notwithstanding this success, detailed simulations of buffer gas cells are rare, and have never been compared to experimental data in the regime of low to intermediate buffer gas densities. Here, we present a numerical approach based on a trajectory analysis, with molecules performing a random walk in the cell due to collisions with a homogeneous buffer gas. This method can reproduce experimental flux and velocity distributions of molecules emerging from the buffer gas cell for varying buffer gas densities. This includes the strong decrease in molecule output from the cell for increasing buffer gas density and the so-called boosting effect, when molecules are accelerated by buffer-gas atoms after leaving the cell. The simulations provide various insights which could substantially improve buffer-gas cell design.

DOI
10.1088/1361-6455/ab8b42

Related papers

Hydrodynamic effects in cryogenic buffer gas cells: design insights from hybrid simulations

Nick Vogeley, Bernd Bauerhenne, Daqing Wang

Abstract Cryogenic buffer gas beam(CBGB) sources have become an essential tool for experiments requiring cold molecular beams with low forward velocities. Although recent experimental advances have led to significant progress in source optimization, numerical studies remain limited due to the challenges posed by the large parameter ranges required to describe both the dense buffer gas and the dilute seed molecules. In this work, we report a numerical evaluation of CBGB cells operating in the hydrodynamic extraction regime. While most prior studies focused on box-like or cylindrical cells, we investigated hydrodynamic effects including vortex formation in a dome-shaped cell and assessed whether these could be utilized to enhance the performance in molecule cooling and extraction. To achieve this, we performed steady-state slip-flow simulations for helium buffer gas and employed a direct-simulation Monte Carlo diffusion routine to track particle trajectories. We compared the performance of the source across different buffer gas throughputs and injection angles and identified parameter regimes where vortex formation enhances molecule extraction. From the simulations, we extracted experimental observables, which allow these effects to be verified through velocity or time-of-flight measurements on the molecular beam.

arXiv:2508.04364•New Journal of Physics•Nov 1, 2025•0 citations

Simulation of cryogenic buffer gas beams

Yuiki Takahashi, David Shlivko, Gabriel Woolls +1 more

The cryogenic buffer gas beam (CBGB) is an important tool in the study of cold and ultracold molecules.While there are known techniques to enhance desired beam properties of a CBGB, such as high flux, low velocity, or reduced divergence, they have generally not undergone detailed numerical optimization.Numerical simulation of buffer gas beams is challenging, because the relevant dynamics occur in regions where the density varies by orders of magnitude, rendering typical numerical methods unreliable or intractable.Here we simulate CBGBs with a hybrid approach that combines gas dynamics methods with particle tracing.The simulations capture important properties, such as velocitiy and divergence, across an assortment of designs, including two-stage slowing cells and de Laval nozzles.This approach should therefore be a useful tool for optimizing CBGB designs across a wide range of applications.

arXiv:2011.11887•Physical Review Research•Apr 6, 2021•14 citations

Novel Applications of Buffer-Gas Cooling to Cold Atoms, Diatomic Molecules, and Large Molecules

Garrett K. Drayna

Cold gases of atoms and molecules provide a system for the exploration of a diverse set of physical phenomena. For example, cold gasses of magnetically and electrically polar atoms and molecules are ideal systems for quantum simulation and quantum computation experiments, and cold gasses of large polar molecules allow for novel spectroscopic techniques. Buffer-gas cooling is a robust and widely applicable method for cooling atoms and molecules to temperatures of approximately 1 Kelvin. In this thesis, I present novel applications of buffer-gas cooling to obtaining gases of trapped, ultracold atoms and diatomic molecules, as well as the study of the cooling of large organic molecules. In the first experiment of this thesis, a buffer-gas beam source of atoms is used to directly load a magneto-optical trap. Due to the versatility of the buffer-gas beam source, we obtain trapped, sub-milliKelvin gases of four different lanthanide species using the same experimental apparatus. In the second experiment of this thesis, a buffer-gas beam is used as the initial stage of an experiment to directly laser cool and magneto-optically trap the diatomic molecule CaF. In the third experiment of this thesis, buffer-gas cooling is used to study the cooling of the conformational state of large organic molecules. We directly observe conformational relaxation of gas-phase 1,2-propanediol due to cold collisions with helium gas. Lastly, I present preliminary results on a variety of novel applications of buffer-gas cooling, such as mixture analysis, separation of chiral mixtures, the measurement of parity-violation in chiral molecules, and the cooling and spectroscopy of highly unstable reaction intermediates.

•Jan 27, 2016•1 citation

Buffer gas cooling of a continuous CO molecular beam

Aman Gangwar, Tommaso Vedovello, Francesco Pio Merafina +5 more

We characterize a continuous buffer gas cooled source using CO molecules. We show results about the source performance considering different parameters, like gas flow rate, nozzle size, and internal cell volume. The beam contains 2.5 × 10 14 molecules/(s sr) at about 160 m/s. Moreover, for two rotational states we observe an unexpected population distribution that we tentatively attribute to a lower temperature inside the cell. Considering the importance of buffer-gas cooling for experiments on ultracold molecules prepared with direct laser cooling, we believe that our work will improve this key first-stage cooling, accelerating the adoption of molecules in the framework of quantum technologies.

Optics Express•Jun 4, 2025•2 citations

Cold collisions of complex polyatomic molecules

Zhiying Li, Eric J. Heller

We introduce a method for classical trajectory calculations to simulate collisions between atoms and large rigid asymmetric-top molecules. We investigate the formation of molecule-helium complexes in buffer-gas cooling experiments at a temperature of 6.5 K for molecules as large as naphthalene. Our calculations show that the mean lifetime of the naphthalene-helium quasi-bound collision complex is not long enough for the formation of stable clusters under the experimental conditions. Our results suggest that it may be possible to improve the efficiency of the production of cold molecules in buffer-gas cooling experiments by increasing the density of helium. In addition, we find that the shape of molecules is important for the collision dynamics when the vibrational motion of molecules is frozen. For some molecules, it is even more crucial than the number of accessible degrees of freedom. This indicates that by selecting molecules with suitable shape for buffer-gas cooling, it may be possible to cool molecules with a very large number of degrees of freedom.

arXiv:1111.4706•The Journal of Chemical Physics•Feb 6, 2012•20 citations

Enhanced Buffer Gas Loading: Cooling and Trapping of Atoms with Low Effective Magnetic Moments

R. A. Michniak

A new technique for buffer gas loading is described. This technique greatly extends the range of atoms and molecules that may be magnetically trapped at low temperature. The advance is made possible by the rapid removal of the buffer gas on a time scale one hundred times greater than in previous buffer gas loading experiments. A new cryogenic valve is developed and employed. The following benchmarks were attained in our first experimental run; approximately 10 atoms with effective magnetic moments μeff & 3μB were trapped and thermally isolated with near unit efficiency, ~ 10 μeff = 2μB atoms were trapped and thermally isolated, and ~ 10 μeff = 1μB atoms were trapped, but without thermal isolation. For comparison, all previous buffer gas loading experiments that achieved thermal isolation after trapping were done with atoms having a magnetic moment of at least 6μB. In our second run of the experiment, better temperature management allowed us to increase the number of trapped and thermally isolated μeff = 2μB atoms to ~10 and trapped μeff = 1μB atoms to ~ 10. The performance of the present apparatus is limited by the presence of a desorbing helium film that compromises the vacuum in the cell after the bulk of the buffer gas is removed. Future improvements to address this problem are suggested that will likely allow for efficient trapping and thermal isolation of atoms and molecules with magnetic moments as low as 1μB. Analysis of the trapping and pumping dynamics is presented.

•Jan 1, 2004•5 citations
Abstract Cryogenic buffer gas cells have been a workhorse for the cooling of molecules in the last few decades. The straightforward sympathetic cooling principle makes them applicable to a huge variety of different species. Notwithstanding this success, detailed simulations of buffer gas cells are rare, and have never been compared to experimental data in the regime of low to intermediate buffer gas densities. Here, we present a numerical approach based on a trajectory analysis, with molecules performing a random walk in the cell due to collisions with a homogeneous buffer gas. This method can reproduce experimental flux and velocity distributions of molecules emerging from the buffer gas cell for varying buffer gas densities. This includes the strong decrease in molecule output from the cell for increasing buffer gas density and the so-called boosting effect, when molecules are accelerated by buffer-gas atoms after leaving the cell. The simulations provide various insights which could substantially improve buffer-gas cell design.
Abstract Cryogenic buffer gas beam(CBGB) sources have become an essential tool for experiments requiring cold molecular beams with low forward velocities. Although recent experimental advances have led to significant progress in source optimization, numerical studies remain limited due to the challenges posed by the large parameter ranges required to describe both the dense buffer gas and the dilute seed molecules. In this work, we report a numerical evaluation of CBGB cells operating in the hydrodynamic extraction regime. While most prior studies focused on box-like or cylindrical cells, we investigated hydrodynamic effects including vortex formation in a dome-shaped cell and assessed whether these could be utilized to enhance the performance in molecule cooling and extraction. To achieve this, we performed steady-state slip-flow simulations for helium buffer gas and employed a direct-simulation Monte Carlo diffusion routine to track particle trajectories. We compared the performance of the source across different buffer gas throughputs and injection angles and identified parameter regimes where vortex formation enhances molecule extraction. From the simulations, we extracted experimental observables, which allow these effects to be verified through velocity or time-of-flight measurements on the molecular beam.
The cryogenic buffer gas beam (CBGB) is an important tool in the study of cold and ultracold molecules.While there are known techniques to enhance desired beam properties of a CBGB, such as high flux, low velocity, or reduced divergence, they have generally not undergone detailed numerical optimization.Numerical simulation of buffer gas beams is challenging, because the relevant dynamics occur in regions where the density varies by orders of magnitude, rendering typical numerical methods unreliable or intractable.Here we simulate CBGBs with a hybrid approach that combines gas dynamics methods with particle tracing.The simulations capture important properties, such as velocitiy and divergence, across an assortment of designs, including two-stage slowing cells and de Laval nozzles.This approach should therefore be a useful tool for optimizing CBGB designs across a wide range of applications.
Cold gases of atoms and molecules provide a system for the exploration of a diverse set of physical phenomena. For example, cold gasses of magnetically and electrically polar atoms and molecules are ideal systems for quantum simulation and quantum computation experiments, and cold gasses of large polar molecules allow for novel spectroscopic techniques. Buffer-gas cooling is a robust and widely applicable method for cooling atoms and molecules to temperatures of approximately 1 Kelvin. In this thesis, I present novel applications of buffer-gas cooling to obtaining gases of trapped, ultracold atoms and diatomic molecules, as well as the study of the cooling of large organic molecules. In the first experiment of this thesis, a buffer-gas beam source of atoms is used to directly load a magneto-optical trap. Due to the versatility of the buffer-gas beam source, we obtain trapped, sub-milliKelvin gases of four different lanthanide species using the same experimental apparatus. In the second experiment of this thesis, a buffer-gas beam is used as the initial stage of an experiment to directly laser cool and magneto-optically trap the diatomic molecule CaF. In the third experiment of this thesis, buffer-gas cooling is used to study the cooling of the conformational state of large organic molecules. We directly observe conformational relaxation of gas-phase 1,2-propanediol due to cold collisions with helium gas. Lastly, I present preliminary results on a variety of novel applications of buffer-gas cooling, such as mixture analysis, separation of chiral mixtures, the measurement of parity-violation in chiral molecules, and the cooling and spectroscopy of highly unstable reaction intermediates.
We characterize a continuous buffer gas cooled source using CO molecules. We show results about the source performance considering different parameters, like gas flow rate, nozzle size, and internal cell volume. The beam contains 2.5 × 10 14 molecules/(s sr) at about 160 m/s. Moreover, for two rotational states we observe an unexpected population distribution that we tentatively attribute to a lower temperature inside the cell. Considering the importance of buffer-gas cooling for experiments on ultracold molecules prepared with direct laser cooling, we believe that our work will improve this key first-stage cooling, accelerating the adoption of molecules in the framework of quantum technologies.
We introduce a method for classical trajectory calculations to simulate collisions between atoms and large rigid asymmetric-top molecules. We investigate the formation of molecule-helium complexes in buffer-gas cooling experiments at a temperature of 6.5 K for molecules as large as naphthalene. Our calculations show that the mean lifetime of the naphthalene-helium quasi-bound collision complex is not long enough for the formation of stable clusters under the experimental conditions. Our results suggest that it may be possible to improve the efficiency of the production of cold molecules in buffer-gas cooling experiments by increasing the density of helium. In addition, we find that the shape of molecules is important for the collision dynamics when the vibrational motion of molecules is frozen. For some molecules, it is even more crucial than the number of accessible degrees of freedom. This indicates that by selecting molecules with suitable shape for buffer-gas cooling, it may be possible to cool molecules with a very large number of degrees of freedom.
A new technique for buffer gas loading is described. This technique greatly extends the range of atoms and molecules that may be magnetically trapped at low temperature. The advance is made possible by the rapid removal of the buffer gas on a time scale one hundred times greater than in previous buffer gas loading experiments. A new cryogenic valve is developed and employed. The following benchmarks were attained in our first experimental run; approximately 10 atoms with effective magnetic moments μeff & 3μB were trapped and thermally isolated with near unit efficiency, ~ 10 μeff = 2μB atoms were trapped and thermally isolated, and ~ 10 μeff = 1μB atoms were trapped, but without thermal isolation. For comparison, all previous buffer gas loading experiments that achieved thermal isolation after trapping were done with atoms having a magnetic moment of at least 6μB. In our second run of the experiment, better temperature management allowed us to increase the number of trapped and thermally isolated μeff = 2μB atoms to ~10 and trapped μeff = 1μB atoms to ~ 10. The performance of the present apparatus is limited by the presence of a desorbing helium film that compromises the vacuum in the cell after the bulk of the buffer gas is removed. Future improvements to address this problem are suggested that will likely allow for efficient trapping and thermal isolation of atoms and molecules with magnetic moments as low as 1μB. Analysis of the trapping and pumping dynamics is presented.