Challenges
Datasets
Workspaces
Papers
Discussions
Leaderboard
Log inSign up
Challenges
Datasets
Workspaces
Papers
Discussions
Leaderboard
Blog
Job Board
Q3AS

© 2026 Aqora Quantum S.A.S.

TermsPrivacyLegal Notice

arXiv:2001.00323 · Physical Review Letters

Measuring Effective Temperatures of Qubits Using Correlations

Anatoly Kulikov, Rohit Navarathna, Arkady Fedorov

Published Jun 15, 2020• 22 citations
arXivHTMLPDF

Abstract

Initialization of a qubit in a pure state is a prerequisite for quantum computer operation. A plethora of ways to achieve this has been proposed in the last decade, from active reset protocols to advances in materials and shielding. An instrumental tool to evaluate those methods and develop new ones is the ability to measure the population of excited states with high precision and in a short period of time. In this Letter, we propose a new technique of finding the excited state population of a qubit using correlations between two sequential measurements. We experimentally implement the proposed technique using a circuit QED platform and compare its performance with previously developed ones. Unlike other techniques, our method does not require high-fidelity readout and does not involve the excited levels of the system outside of the qubit subspace. We experimentally demonstrated measurement of the spurious qubit population with accuracy of up to 0.01%. This accuracy enabled us to perform "temperature spectroscopy" of the qubit, which helps to shed light on decoherence sources.

DOI
10.1103/physrevlett.124.240501

Related papers

Fast qubit initialization in a superconducting circuit*

Tianqi Huang, Wen Zheng, Shuqing Song +5 more

We demonstrate an active reset protocol in a superconducting quantum circuit. The thermal population on the excited state of a transmon qubit is reduced through driving the transitions between the qubit and an ancillary qubit. Furthermore, we investigate the efficiency of this approach at different temperatures. The result shows that population in the first excited state can be dropped from 7% to 2.55% in 27 ns at 30 mK. The efficiency improves as the temperature increases. Compared to other schemes, our proposal alleviates the requirements for measurement procedure and equipment. With the increase of qubit integration, the fast reset technique holds the promise of improving the fidelity of quantum control.

Chinese Physics B•May 8, 2021•0 citations

Correlation Spectroscopy with Multiqubit-Enhanced Phase Estimation

Helene Hainzer, Dominik Kiesenhofer, Tuomas Ollikainen +7 more

Ramsey interferometry is a widely used tool for precisely measuring transition frequencies between two energy levels of a quantum system, with applications in time keeping, precision spectroscopy, quantum optics, and quantum information. Often, the coherence time of the quantum system surpasses the one of the oscillator probing the system, thereby limiting the interrogation time and associated spectral resolution. Correlation spectroscopy overcomes this limitation by probing two quantum systems with the same noisy oscillator for a measurement of their transition frequency difference; this technique has enabled very precise comparisons of atomic clocks. Here, we extend correlation spectroscopy to the case of multiple quantum systems undergoing strong correlated dephasing. We model Ramsey correlation spectroscopy with N particles as a multiparameter phase estimation problem and demonstrate that multiparticle correlations can assist in reducing the measurement uncertainties even in the absence of entanglement. We derive precision limits and optimal sensing techniques for this problem and compare the performance of probe states and measurement with and without entanglement. Using one- and two-dimensional ion Coulomb crystals with up to 91 qubits, we experimentally demonstrate the advantage of measuring multiparticle correlations for reducing phase uncertainties and apply correlation spectroscopy to measure ion-ion distances, transition frequency shifts, laser-ion detunings, and path-length fluctuations. Our method can be straightforwardly implemented in experimental setups with globally coherent qubit control and qubit-resolved single-shot readout and is, thus, applicable to other physical systems such as neutral atoms in tweezer arrays. Published by the American Physical Society 2024

arXiv:2203.12656•Physical Review X•Feb 29, 2024•13 citations

In situ quantum control over superconducting qubits

Anatoly Kulikov

In the last decade, quantum information processing has transformed from a field of mostly academic research to an applied engineering subfield with many commercial companies announcing strategies to achieve quantum advantage and construct a useful universal quantum computer. Continuing efforts to improve qubit lifetime, control techniques, materials and fabrication methods together with exploring ways to scale up the architecture have culminated in the recent achievement of quantum supremacy using a programmable superconducting processor -- a major milestone in quantum computing en route to useful devices. Marking the point when for the first time a quantum processor can outperform the best classical supercomputer, it heralds a new era in computer science, technology and information processing.One of the key developments enabling this transition to happen is the ability to exert more precise control over quantum bits and the ability to detect and mitigate control errors and imperfections. In this thesis, ways to efficiently control superconducting qubits are explored from the experimental viewpoint.We introduce a state-of-the-art experimental machinery enabling one to perform one- and two-qubit gates focusing on the technical aspect and outlining some guidelines for its efficient operation. We describe the software stack from the time alignment of control pulses and triggers to the data processing organisation. We then bring in the standard qubit manipulation and readout methods and proceed to describe some of the more advanced optimal control and calibration techniques.The described toolbox together with some newly developed advances such as multi-level single-shot readout are applied to a practical problem of generating high-quality random numbers. Following the recent advances in the field, we certify our generator based on the Kochen-Specker theorem utilizing contextuality of quantum mechanics as an underlying resource of randomness. Our implementation based on the solid-state circuit quantum electrodynamics (QED) platform and the new certification scheme allows us to greatly enhance the bit rate of certified quantum random number generators (QRNGs) and approach the requirements for real-world applications.Addressing some of the control and state preparation errors, we develop a set of techniques to use a qubit as an in situ probe of distortions of its control lines and its effective temperature. Considering a qubit simultaneously driven by a longitudinal and a transverse MW-drives under certain resonant conditions, we show that in the rotating dressed-state picture (second rotating frame) one can get information about both the amplitude and the phase of the drive signals. This allows us to employ a qubit as an on-chip vector network analyzer and precisely measure the transfer functions of its control lines. As no other method with comparable frequency domain coverage exists, we verify our technique by cancelling out the distortions and increasing the fidelity of entangling two-qubit CPHASE gate.Finally, we show that the decay of the correlations between two sequential measurements of a quantum bit is a manifestation of its nonzero effective temperature. We use it to develop a precise method of evaluating the qubits population allowing for virtually unlimited suppression of absolute errors. We realize the method and demonstrate its applicability to the calibration of a quantum processor and evaluation of active reset techniques. As the actual mechanism of the increased excited-state population is currently unknown, we use our method's precision to show the qubit’s coupling to two separate independent thermal baths. We also introduce the ‘temperature spectroscopy’ as a tool to acquire more information about the qubits spurious excitation sources.

•Oct 9, 2020•0 citations

Localized Thermometry via Dayem Bridges Integrated on Superconducting Qubit Chips

Ella O. Lachman, Dave P. Pappas, Jayss Marshall +1 more

Accurate knowledge of the on-chip temperature is essential for understanding and optimizing the performance of superconducting qubits, yet direct thermometry at millikelvin temperatures remains challenging. While qubits themselves are sensitive to the temperature of their environment, other factors may affect the qubits` effective temperature, and using them as thermometers with any accuracy requires specialized measurement protocols and qubit designs, limiting their practicality for routine diagnostics and adding complex infrastructure to any hardware testing apparatus. Here we demonstrate a complementary on-chip thermometry method based on superconducting Dayem bridges that are integrated on the same chip as transmon qubits. By extracting the critical current of the Dayem bridge from I-V measurements, we obtain a local, quantitative measure of the chip temperature without the need for microwave calibration or qubit-specific control sequences. To demonstrate the utility of the Dayem bridges as thermometers, we fabricate them in-situ with qubits on the same chip, calibrate the Dayem bridge critical current as a function of temperature, and characterize its resolution and stability at cryogenic temperatures. We additionally perform simultaneous measurements of the Dayem bridge thermometer and qubit excited-state population, and show agreement over the relevant temperature range, validating the method against established qubit thermometry. Furthermore, we correlate the independently measured chip temperature with qubit energy relaxation and dephasing times, demonstrating the utility of this approach for diagnosing temperature-dependent decoherence mechanisms. These results establish integrated Dayem bridges as a simple, non-invasive, and scalable tool for cryogenic hardware development, and on chip thermometry in superconducting quantum circuits.

quant-pharXiv:2607.06670•Jul 9, 2026•1 citation

Thermometry based on a superconducting qubit

Dmitry S. Lvov, S. A. Lemzyakov, Elias Ankerhold +2 more

We report temperature measurements using a transmon qubit by detecting the population of its first three energy levels after applying a sequence of π pulses and performing projective dispersive readout. We measure the effective temperature of the qubit and characterize its relaxation and coherence times τ 1 , τ 2 for three devices in the temperature range from 20 to 300 mK. We analyze the process of qubit thermalization to its effective environment consisting of multiple heat baths and support this with experimental data. The signal-to-noise ratio of the temperature measurement depends strongly on τ 1 , which drops at higher temperatures due to quasiparticle excitations, adversely affecting the measurements and setting an upper bound of the dynamic temperature range of the thermometer. The measurement relies on coherent dynamics of the qubit during the π pulses. The effective qubit temperature follows closely that of the cryostat in the range from 100 to 200 mK. We present a numerical model of the qubit population distribution and find hat it compares favorably with the experimental results. Finally, we compare our technique with previous work on qubit thermometry and discuss its application prospects.

arXiv:2409.02784•Physical Review Applied•May 28, 2025•30 citations

Taking the temperature of a pure quantum state

Mark T. Mitchison, Archak Purkayastha, Marlon Brenes +2 more

Temperature is a deceptively simple concept that still raises deep questions at the forefront of quantum physics research. The observation of thermalization in completely isolated quantum systems, such as cold-atom quantum simulators, implies that a temperature can be assigned even to individual, pure quantum states. Here, we propose a scheme to measure the temperature of such pure states through quantum interference. Our proposal involves interferometry of an auxiliary qubit probe, which is prepared in a superposition state and subsequently decoheres due to weak coupling with a closed, thermalized many-body system. Using only a few basic assumptions about chaotic quantum systems, namely, the eigenstate thermalization hypothesis and the emergence of hydrodynamics at long times, we show that the qubit undergoes pure exponential decoherence at a rate that depends on the temperature of its surroundings. We verify our predictions by numerical experiments on a quantum spin chain that thermalizes after absorbing energy from a periodic drive. Our Letter provides a general method to measure the temperature of isolated, strongly interacting systems under minimal assumptions.

arXiv:2103.16601•Physical Review A•Mar 8, 2022•26 citations
Initialization of a qubit in a pure state is a prerequisite for quantum computer operation. A plethora of ways to achieve this has been proposed in the last decade, from active reset protocols to advances in materials and shielding. An instrumental tool to evaluate those methods and develop new ones is the ability to measure the population of excited states with high precision and in a short period of time. In this Letter, we propose a new technique of finding the excited state population of a qubit using correlations between two sequential measurements. We experimentally implement the proposed technique using a circuit QED platform and compare its performance with previously developed ones. Unlike other techniques, our method does not require high-fidelity readout and does not involve the excited levels of the system outside of the qubit subspace. We experimentally demonstrated measurement of the spurious qubit population with accuracy of up to 0.01%. This accuracy enabled us to perform "temperature spectroscopy" of the qubit, which helps to shed light on decoherence sources.
We demonstrate an active reset protocol in a superconducting quantum circuit. The thermal population on the excited state of a transmon qubit is reduced through driving the transitions between the qubit and an ancillary qubit. Furthermore, we investigate the efficiency of this approach at different temperatures. The result shows that population in the first excited state can be dropped from 7% to 2.55% in 27 ns at 30 mK. The efficiency improves as the temperature increases. Compared to other schemes, our proposal alleviates the requirements for measurement procedure and equipment. With the increase of qubit integration, the fast reset technique holds the promise of improving the fidelity of quantum control.
Ramsey interferometry is a widely used tool for precisely measuring transition frequencies between two energy levels of a quantum system, with applications in time keeping, precision spectroscopy, quantum optics, and quantum information. Often, the coherence time of the quantum system surpasses the one of the oscillator probing the system, thereby limiting the interrogation time and associated spectral resolution. Correlation spectroscopy overcomes this limitation by probing two quantum systems with the same noisy oscillator for a measurement of their transition frequency difference; this technique has enabled very precise comparisons of atomic clocks. Here, we extend correlation spectroscopy to the case of multiple quantum systems undergoing strong correlated dephasing. We model Ramsey correlation spectroscopy with N particles as a multiparameter phase estimation problem and demonstrate that multiparticle correlations can assist in reducing the measurement uncertainties even in the absence of entanglement. We derive precision limits and optimal sensing techniques for this problem and compare the performance of probe states and measurement with and without entanglement. Using one- and two-dimensional ion Coulomb crystals with up to 91 qubits, we experimentally demonstrate the advantage of measuring multiparticle correlations for reducing phase uncertainties and apply correlation spectroscopy to measure ion-ion distances, transition frequency shifts, laser-ion detunings, and path-length fluctuations. Our method can be straightforwardly implemented in experimental setups with globally coherent qubit control and qubit-resolved single-shot readout and is, thus, applicable to other physical systems such as neutral atoms in tweezer arrays. Published by the American Physical Society 2024
In the last decade, quantum information processing has transformed from a field of mostly academic research to an applied engineering subfield with many commercial companies announcing strategies to achieve quantum advantage and construct a useful universal quantum computer. Continuing efforts to improve qubit lifetime, control techniques, materials and fabrication methods together with exploring ways to scale up the architecture have culminated in the recent achievement of quantum supremacy using a programmable superconducting processor -- a major milestone in quantum computing en route to useful devices. Marking the point when for the first time a quantum processor can outperform the best classical supercomputer, it heralds a new era in computer science, technology and information processing.One of the key developments enabling this transition to happen is the ability to exert more precise control over quantum bits and the ability to detect and mitigate control errors and imperfections. In this thesis, ways to efficiently control superconducting qubits are explored from the experimental viewpoint.We introduce a state-of-the-art experimental machinery enabling one to perform one- and two-qubit gates focusing on the technical aspect and outlining some guidelines for its efficient operation. We describe the software stack from the time alignment of control pulses and triggers to the data processing organisation. We then bring in the standard qubit manipulation and readout methods and proceed to describe some of the more advanced optimal control and calibration techniques.The described toolbox together with some newly developed advances such as multi-level single-shot readout are applied to a practical problem of generating high-quality random numbers. Following the recent advances in the field, we certify our generator based on the Kochen-Specker theorem utilizing contextuality of quantum mechanics as an underlying resource of randomness. Our implementation based on the solid-state circuit quantum electrodynamics (QED) platform and the new certification scheme allows us to greatly enhance the bit rate of certified quantum random number generators (QRNGs) and approach the requirements for real-world applications.Addressing some of the control and state preparation errors, we develop a set of techniques to use a qubit as an in situ probe of distortions of its control lines and its effective temperature. Considering a qubit simultaneously driven by a longitudinal and a transverse MW-drives under certain resonant conditions, we show that in the rotating dressed-state picture (second rotating frame) one can get information about both the amplitude and the phase of the drive signals. This allows us to employ a qubit as an on-chip vector network analyzer and precisely measure the transfer functions of its control lines. As no other method with comparable frequency domain coverage exists, we verify our technique by cancelling out the distortions and increasing the fidelity of entangling two-qubit CPHASE gate.Finally, we show that the decay of the correlations between two sequential measurements of a quantum bit is a manifestation of its nonzero effective temperature. We use it to develop a precise method of evaluating the qubits population allowing for virtually unlimited suppression of absolute errors. We realize the method and demonstrate its applicability to the calibration of a quantum processor and evaluation of active reset techniques. As the actual mechanism of the increased excited-state population is currently unknown, we use our method's precision to show the qubit’s coupling to two separate independent thermal baths. We also introduce the ‘temperature spectroscopy’ as a tool to acquire more information about the qubits spurious excitation sources.
Accurate knowledge of the on-chip temperature is essential for understanding and optimizing the performance of superconducting qubits, yet direct thermometry at millikelvin temperatures remains challenging. While qubits themselves are sensitive to the temperature of their environment, other factors may affect the qubits` effective temperature, and using them as thermometers with any accuracy requires specialized measurement protocols and qubit designs, limiting their practicality for routine diagnostics and adding complex infrastructure to any hardware testing apparatus. Here we demonstrate a complementary on-chip thermometry method based on superconducting Dayem bridges that are integrated on the same chip as transmon qubits. By extracting the critical current of the Dayem bridge from I-V measurements, we obtain a local, quantitative measure of the chip temperature without the need for microwave calibration or qubit-specific control sequences. To demonstrate the utility of the Dayem bridges as thermometers, we fabricate them in-situ with qubits on the same chip, calibrate the Dayem bridge critical current as a function of temperature, and characterize its resolution and stability at cryogenic temperatures. We additionally perform simultaneous measurements of the Dayem bridge thermometer and qubit excited-state population, and show agreement over the relevant temperature range, validating the method against established qubit thermometry. Furthermore, we correlate the independently measured chip temperature with qubit energy relaxation and dephasing times, demonstrating the utility of this approach for diagnosing temperature-dependent decoherence mechanisms. These results establish integrated Dayem bridges as a simple, non-invasive, and scalable tool for cryogenic hardware development, and on chip thermometry in superconducting quantum circuits.
We report temperature measurements using a transmon qubit by detecting the population of its first three energy levels after applying a sequence of π pulses and performing projective dispersive readout. We measure the effective temperature of the qubit and characterize its relaxation and coherence times τ 1 , τ 2 for three devices in the temperature range from 20 to 300 mK. We analyze the process of qubit thermalization to its effective environment consisting of multiple heat baths and support this with experimental data. The signal-to-noise ratio of the temperature measurement depends strongly on τ 1 , which drops at higher temperatures due to quasiparticle excitations, adversely affecting the measurements and setting an upper bound of the dynamic temperature range of the thermometer. The measurement relies on coherent dynamics of the qubit during the π pulses. The effective qubit temperature follows closely that of the cryostat in the range from 100 to 200 mK. We present a numerical model of the qubit population distribution and find hat it compares favorably with the experimental results. Finally, we compare our technique with previous work on qubit thermometry and discuss its application prospects.
Temperature is a deceptively simple concept that still raises deep questions at the forefront of quantum physics research. The observation of thermalization in completely isolated quantum systems, such as cold-atom quantum simulators, implies that a temperature can be assigned even to individual, pure quantum states. Here, we propose a scheme to measure the temperature of such pure states through quantum interference. Our proposal involves interferometry of an auxiliary qubit probe, which is prepared in a superposition state and subsequently decoheres due to weak coupling with a closed, thermalized many-body system. Using only a few basic assumptions about chaotic quantum systems, namely, the eigenstate thermalization hypothesis and the emergence of hydrodynamics at long times, we show that the qubit undergoes pure exponential decoherence at a rate that depends on the temperature of its surroundings. We verify our predictions by numerical experiments on a quantum spin chain that thermalizes after absorbing energy from a periodic drive. Our Letter provides a general method to measure the temperature of isolated, strongly interacting systems under minimal assumptions.