Challenges
Datasets
Workspaces
Papers
Discussions
Leaderboard
Log inSign up
Challenges
Datasets
Workspaces
Papers
Discussions
Leaderboard
Blog
Job Board
Q3AS

© 2026 Aqora Quantum S.A.S.

TermsPrivacyLegal Notice

arXiv:1912.08789

Circumventing defective components in linear optical interferometers

Ish Dhand

Published Dec 18, 2019• 4 citations
arXivHTMLPDF

Abstract

A crucial challenge to the scaling up of linear optical interferometers is the presence of defective optical components resulting from inevitable imperfections in fabrication and packaging. This work presents a method for circumventing such defective components including lossy modes and unresponsive phase shifters and beam-splitters. The method allows for using universal linear optical interferometers with such defects as smaller universal interferometers. The method presented here tolerates remarkably high defect rates in constructing linear optical interferometers, thus bringing closer to reality the possibility of obtaining quantum advantage with linear optics.

DOI
10.48550/arxiv.1912.08789

Related papers

Mitigating linear optics imperfections via port allocation and\n compilation

Shreya P. Kumar, Leonhard Neuhaus, L. G. Helt +4 more

Linear optics is a promising route to building quantum technologies that operate at room temperature and can be manufactured scalably on integrated photonic platforms. However, scaling up linear optics requires high-performance operation amid inevitable manufacturing imperfections. We present techniques for enhancing the performance of linear optical interferometers by tailoring their port allocation and compilation to the on-chip imperfections, which can be determined beforehand by suitable calibration procedures that we introduce. As representative examples, we demonstrate dramatic reductions in the average power consumption of a given interferometer or in the range of its power consumption values across all possible unitary transformations implemented on it. Furthermore, we demonstrate the efficacy of these techniques at improving the fidelities of the desired transformations in the presence of fabrication defects. By improving the performance of linear optical interferometers in relevant metrics by several orders of magnitude, these tools bring optical technologies closer to demonstrating true quantum advantage.

arXiv:2103.03183•Mar 4, 2021•18 citations

Optimal design for universal multiport interferometers

William R. Clements, Peter C. Humphreys, Benjamin J. Metcalf +2 more

Universal multiport interferometers, which can be programmed to implement any linear transformation between multiple channels, are emerging as a powerful tool for both classical and quantum photonics. These interferometers are typically composed of a regular mesh of beam splitters and phase shifters, allowing for straightforward fabrication using integrated photonic architectures and ready scalability. The current, standard design for universal multiport interferometers is based on work by Reck et al. [Phys. Rev. Lett.73, 58 (1994)PRLTAO0031-900710.1103/PhysRevLett.73.58]. We demonstrate a new design for universal multiport interferometers based on an alternative arrangement of beam splitters and phase shifters, which outperforms that by Reck et al. Our design requires half the optical depth of the Reck design and is significantly more robust to optical losses.

arXiv:1603.08788•Optica•Dec 2, 2016•1,311 citations

Arbitrary optical wave evolution with Fourier transforms and phase masks

Víctor López-Pastor, Jeff S. Lundeen, Florian Marquardt

A large number of applications in classical and quantum photonics require the capability of implementing arbitrary linear unitary transformations on a set of optical modes. In a seminal work by Reck et al. [Phys. Rev. Lett.73, 58 (1994)10.1103/PhysRevLett.73.58], it was shown how to build such multiport universal interferometers with a mesh of beam splitters and phase shifters, and this design became the basis for most experimental implementations in the last decades. However, the design of Reck et al. is difficult to scale up to a large number of modes, which would be required for many applications. Here we present a deterministic algorithm that can find an exact and efficient implementation of any unitary transformation, using only Fourier transforms and phase masks. Since Fourier transforms and phase masks are routinely implemented in several optical setups and they do not suffer from some of the scalability issues associated with building extensive meshes of beam splitters, we believe that our design can be useful for many applications in photonics.

arXiv:1912.04721•Optics Express•Oct 20, 2021•57 citations

Further compactifying linear optical unitaries

B. A. Bell, I. A. Walmsley

Quantum integrated photonics requires large-scale linear optical circuitry, and for many applications, it is desirable to have a universally programmable circuit, able to implement an arbitrary unitary transformation on a number of modes. This has been achieved using the Reck scheme, consisting of a network of Mach–Zehnder interferometers containing a variable phase shifter in one path as well as an external phase shifter after each Mach–Zehnder. It subsequently became apparent that with symmetric Mach–Zehnders containing a phase shifter in both paths, the external phase shifters are redundant, resulting in a more compact circuit. The rectangular Clements scheme improves on the Reck scheme in terms of circuit depth, but it has been thought that an external phase-shifter was necessary after each Mach–Zehnder. Here, we show that the Clements scheme can be realized using symmetric Mach–Zehnders, requiring only a small number of external phase-shifters that do not contribute to the depth of the circuit. This will result in a significant saving in the length of these devices, allowing more complex circuits to fit onto a photonic chip, and reducing the propagation losses associated with these circuits. We also discuss how similar savings can be made to alternative schemes, which have robustness to imbalanced beam-splitters.

arXiv:2104.07561•APL Photonics•Jul 1, 2021•54 citations

Reconstruction of the reduced transfer matrix for tunable linear-optical circuits

L. V. Biguaa, I. V. Kondratyev, Nikolay N. Skryabin +2 more

Abstract Tunable linear-optical interferometers are a key element in the implementation of both classical and quantum information technologies. At the same time, during the production process, these systems are subject to various instrumental imperfections and it is necessary to be able to determine with what accuracy and what transformations the manufactured device is capable to reproduce. For integrated devices, such tasks are difficult to perform due to the difficulties in obtaining direct access to individual optical elements of the circuit. Existing methods for reconstructing the transfer matrix of tunable linear-optical interferometers require measuring the phases of its matrix elements at different values of control signals in the circuit, which is also an experimentally time-consuming task. However, in some cases, it is possible to construct a mathematical model of the circuit that works for any values of its control signals, measuring only partial amplitude transmission coefficients at the outputs of the circuit, which significantly simplifies reconstruction and is relevant in a number of applications. In this paper, we performed numerical and experimental approbation of the method on the example of a linear-optical interferometer with four inputs and four outputs with a universal architecture based on mixing layers. The average fidelity value of the reconstruction of the reduced transfer matrix of the optical interferometer, taking into account realistic noise in the experiment, was 99.9% and can be improved due to the proven stability of the model to them.

Laser Physics Letters•Apr 1, 2025•0 citations

Beyond Beam Splitters: Efficiently Decomposing Large Unitaries into Multimode Devices of Arbitrary Size

Christian Arends, Lasse L. Wolf, Jasmin D. A. Meinecke +3 more

Linear optical quantum computing and simulation typically relies on decomposing large unitaries into many 2x2 subunitaries comprising beam splitters and phase shifters. We provide a rigorous decomposition into larger subunitaries, which offer significant scaling improvements.

Quantum 2.0 Conference and Exhibition•Jan 1, 2024•0 citations
A crucial challenge to the scaling up of linear optical interferometers is the presence of defective optical components resulting from inevitable imperfections in fabrication and packaging. This work presents a method for circumventing such defective components including lossy modes and unresponsive phase shifters and beam-splitters. The method allows for using universal linear optical interferometers with such defects as smaller universal interferometers. The method presented here tolerates remarkably high defect rates in constructing linear optical interferometers, thus bringing closer to reality the possibility of obtaining quantum advantage with linear optics.
Linear optics is a promising route to building quantum technologies that operate at room temperature and can be manufactured scalably on integrated photonic platforms. However, scaling up linear optics requires high-performance operation amid inevitable manufacturing imperfections. We present techniques for enhancing the performance of linear optical interferometers by tailoring their port allocation and compilation to the on-chip imperfections, which can be determined beforehand by suitable calibration procedures that we introduce. As representative examples, we demonstrate dramatic reductions in the average power consumption of a given interferometer or in the range of its power consumption values across all possible unitary transformations implemented on it. Furthermore, we demonstrate the efficacy of these techniques at improving the fidelities of the desired transformations in the presence of fabrication defects. By improving the performance of linear optical interferometers in relevant metrics by several orders of magnitude, these tools bring optical technologies closer to demonstrating true quantum advantage.
Universal multiport interferometers, which can be programmed to implement any linear transformation between multiple channels, are emerging as a powerful tool for both classical and quantum photonics. These interferometers are typically composed of a regular mesh of beam splitters and phase shifters, allowing for straightforward fabrication using integrated photonic architectures and ready scalability. The current, standard design for universal multiport interferometers is based on work by Reck et al. [Phys. Rev. Lett.73, 58 (1994)PRLTAO0031-900710.1103/PhysRevLett.73.58]. We demonstrate a new design for universal multiport interferometers based on an alternative arrangement of beam splitters and phase shifters, which outperforms that by Reck et al. Our design requires half the optical depth of the Reck design and is significantly more robust to optical losses.
A large number of applications in classical and quantum photonics require the capability of implementing arbitrary linear unitary transformations on a set of optical modes. In a seminal work by Reck et al. [Phys. Rev. Lett.73, 58 (1994)10.1103/PhysRevLett.73.58], it was shown how to build such multiport universal interferometers with a mesh of beam splitters and phase shifters, and this design became the basis for most experimental implementations in the last decades. However, the design of Reck et al. is difficult to scale up to a large number of modes, which would be required for many applications. Here we present a deterministic algorithm that can find an exact and efficient implementation of any unitary transformation, using only Fourier transforms and phase masks. Since Fourier transforms and phase masks are routinely implemented in several optical setups and they do not suffer from some of the scalability issues associated with building extensive meshes of beam splitters, we believe that our design can be useful for many applications in photonics.
Quantum integrated photonics requires large-scale linear optical circuitry, and for many applications, it is desirable to have a universally programmable circuit, able to implement an arbitrary unitary transformation on a number of modes. This has been achieved using the Reck scheme, consisting of a network of Mach–Zehnder interferometers containing a variable phase shifter in one path as well as an external phase shifter after each Mach–Zehnder. It subsequently became apparent that with symmetric Mach–Zehnders containing a phase shifter in both paths, the external phase shifters are redundant, resulting in a more compact circuit. The rectangular Clements scheme improves on the Reck scheme in terms of circuit depth, but it has been thought that an external phase-shifter was necessary after each Mach–Zehnder. Here, we show that the Clements scheme can be realized using symmetric Mach–Zehnders, requiring only a small number of external phase-shifters that do not contribute to the depth of the circuit. This will result in a significant saving in the length of these devices, allowing more complex circuits to fit onto a photonic chip, and reducing the propagation losses associated with these circuits. We also discuss how similar savings can be made to alternative schemes, which have robustness to imbalanced beam-splitters.
Abstract Tunable linear-optical interferometers are a key element in the implementation of both classical and quantum information technologies. At the same time, during the production process, these systems are subject to various instrumental imperfections and it is necessary to be able to determine with what accuracy and what transformations the manufactured device is capable to reproduce. For integrated devices, such tasks are difficult to perform due to the difficulties in obtaining direct access to individual optical elements of the circuit. Existing methods for reconstructing the transfer matrix of tunable linear-optical interferometers require measuring the phases of its matrix elements at different values of control signals in the circuit, which is also an experimentally time-consuming task. However, in some cases, it is possible to construct a mathematical model of the circuit that works for any values of its control signals, measuring only partial amplitude transmission coefficients at the outputs of the circuit, which significantly simplifies reconstruction and is relevant in a number of applications. In this paper, we performed numerical and experimental approbation of the method on the example of a linear-optical interferometer with four inputs and four outputs with a universal architecture based on mixing layers. The average fidelity value of the reconstruction of the reduced transfer matrix of the optical interferometer, taking into account realistic noise in the experiment, was 99.9% and can be improved due to the proven stability of the model to them.