Challenges
Datasets
Workspaces
Papers
Discussions
Leaderboard
Log inSign up
Challenges
Datasets
Workspaces
Papers
Discussions
Leaderboard
Blog
Job Board
Q3AS

© 2026 Aqora Quantum S.A.S.

TermsPrivacyLegal Notice

arXiv:1911.09648

Tomography on Continuous Variable Quantum States

Ludmila Botelho

Published Nov 18, 2019• 2 citations
arXivHTMLPDF

Abstract

In this work we have explored few tools in Quantum State Tomography for Continuous Variable Systems. The concept of quantum states in phase space representation is introduced in a simple manner by using a few statistical concepts. Unlike most texts of Quantum information in which the Wigner function for a single mode is often more used, in this text the multi-modes state Wigner function is also approached. Our numerical investigations indicate that the reconstructed method using back-projection add some error due the choice of cutoff frequency, therefore it is necessary to use data post-processing, like the semi-definite programs, which provides sufficient conditions correctly estimate the state. Once the information about the state is recovered, important features such as entanglement can also be investigated.

DOI
10.48550/arxiv.1911.09648

Related papers

Continuous-variable tomography of solitary electrons

J. D. Fletcher, Nathan Johnson, E. Locane +7 more

A method for characterising the wave-function of freely-propagating particles would provide a useful tool for developing quantum-information technologies with single electronic excitations. Previous continuous-variable quantum tomography techniques developed to analyse electronic excitations in the energy-time domain have been limited to energies close to the Fermi level. We show that a wide-band tomography of single-particle distributions is possible using energy-time filtering and that the Wigner representation of the mixed-state density matrix can be reconstructed for solitary electrons emitted by an on-demand single-electron source. These are highly localised distributions, isolated from the Fermi sea. While we cannot resolve the pure state Wigner function of our excitations due to classical fluctuations, we can partially resolve the chirp and squeezing of the Wigner function imposed by emission conditions and quantify the quantumness of the source. This tomography scheme, when implemented with sufficient experimental resolution, will enable quantum-limited measurements, providing information on electron coherence and entanglement at the individual particle level.

arXiv:1901.10985•Nature Communications•Nov 22, 2019•63 citations

Characterization of quantum states of light by means of homodyne detection and reconstruction of Wigner functions

Andrés Martínez Silva

In this work, a continuous variable quantum tomography is presented. This is done using two approaches, one using simulated data and another one using data from measurements performed in the laboratory. The Radon inverse transform, under the approximation of filtered back projection, alongside the details on the implementa- tion of balanced homodyne detection needed to perform the tomography are clearly explained. Density matrices in the quadrature and number representation are also obtained from the Wigner function. Additionally, complete documentation of the computational implementation and a user-friendly interface for the tomography is reported

•Jan 1, 2020•0 citations

Charakterisierung und Messung der Eigenschaften von Quantenzuständen mit kontinuierlichen Variablen

Matthias Ohliger

We investigate properties of quantum mechanical systems in the light of quantum information theory. We put an emphasize on systems with infinite-dimensional Hilbert spaces, so-called continuous-variable systems'', which are needed to describe quantum optics beyond the single photon regime and other Bosonic quantum systems. We present methods to obtain a description of such systems from a series of measurements in an efficient manner and demonstrate the performance in realistic situations by means of numerical simulations. We consider both unconditional quantum state tomography, which is applicable to arbitrary systems, and tomography of matrix product states. The latter allows for the tomography of many-body systems because the necessary number of measurements scales merely polynomially with the particle number, compared to an exponential scaling in the generic case. We also present a method to realize such a tomography scheme for a system of ultra-cold atoms in optical lattices. Furthermore, we discuss in detail the possibilities and limitations of using continuous-variable systems for measurement-based quantum computing. We will see that the distinction between Gaussian and non-Gaussian quantum states and measurements plays an crucial role. We also provide an algorithm to solve the large and interesting class of naturally occurring Hamiltonians, namely frustration free ones, efficiently and use this insight to obtain a simple approximation method for slightly frustrated systems. To achieve this goals, we make use of, among various other techniques, the well developed theory of matrix product states, tensor networks, semi-definite programming, and matrix analysis.

•Dec 17, 2012•0 citations

Quantum state reconstruction: a comparison of maximum likelihood and tomographic schemes

Daniel F. V. James, Paul G. Kwiat, Z. Hradil +2 more

Summary form only given. Experimental techniques for measurement of the quantum state of light have been the subject of intensive investigation for some time. Tomographic techniques have been applied to experiments such as the homodyne measurement of the Wigner function of a single mode of light and of the density matrix of the polarization degrees of freedom of a pair of entangled photons. In this technique, the density matrix (or Wigner function) which characterizes the quantum state of the system being measured is found from a linear transformation of experimental data. There are a number of drawbacks to the method, principally in that the recovered state might not, because of experimental noise, correspond to a physical state. For example, density matrices for any quantum state must be Hermitian, positive semi-definite matrices with unit trace. The tomographically measured matrices often fail to be positive semi-definite. To avoid this problem, the maximum likelihood approach to the estimation of quantum states has been developed. We evaluate two different approaches to the maximum likelihood technique, namely defining the likelihood function f as a weighted sum of squared variances from measured data, and defining it in terms of information content. These are compared with results of standard tomographical schemes.

Quantum Electronics and Laser Science Conference•Nov 13, 2002•2 citations

Continuous Measurement Quantum State Tomography of Atomic Ensembles

Riofrio Almeida, A R Carlos

Quantum state tomography is a fundamental tool in quantum information processing. It allows us to estimate the state of a quantum system by measuring different observables on many identically prepared copies of the system. This is, in general, a very time-consuming task that requires a large number of measurements. There are, however, systems in which the data acquisition can be done more efficiently. In fact, an ensemble of quantum systems can be prepared and manipulated by external fields while being continuously and collectively probed, producing enough information to estimate its state. This provides a basis for continuous measurement quantum tomography. In this protocol, an ensemble of identically prepared systems is collectively probed and controlled in a time-dependent manner to create an informationally complete continuous measurement record. The measurement history is then inverted to determine the state at the initial time. We use two different estimation methods: maximum likelihood and compressed sensing. The general formalism is applied to the case of reconstruction of the quantum state encoded in the magnetic sub-levels of a large-spin alkali atom, ${}^{133}$Cs. We apply this protocol to the case of reconstruction of states in the full 16-dimensional electronic-ground subspace ($F=3 \oplus F=4$), controlled by microwaves and radio-frequency magnetic fields. We present an experimental demonstration of continuous measurement quantum tomography in an ensemble of cold cesium atoms with full control of its 16-dimensional Hilbert space. We show the exquisite level of control achieved in the lab and the excellent agreement between the theory discussed in this dissertation and the experimental results. This allows us to achieve fidelities >95% for low complexity quantum states, and >92% for arbitrary random states, which is a formidable accomplishment for a space of this size.

•Jan 1, 2012•4 citations

Continuous-Variable Quantum State Tomography Enabled by Quantum Mirrors

Mariano Uria, Amaru Moya, Carla Hermann-Avigliano +2 more

In quantum technologies, continuous-variable systems offer advantages over their discrete counterparts. However, continuous-variable tomography suffers from exponentially growing sample complexity. We propose protocols using quantum mirrors to transfer the complete information of incident photonic states onto a control atomic system. This enables full photonic state characterization through measurements on the control atom alone, realized via kernel functions, direct wavefunction reconstruction, and pointwise Wigner function measurements. Our approach overcomes the limitations of conventional photon counting, statistical inference, and inverse transformation, providing a robust framework for benchmarking and verifying non-Gaussian states in continuous-variable quantum optics.

quant-pharXiv:2606.04277•Jun 4, 2026•0 citations
In this work we have explored few tools in Quantum State Tomography for Continuous Variable Systems. The concept of quantum states in phase space representation is introduced in a simple manner by using a few statistical concepts. Unlike most texts of Quantum information in which the Wigner function for a single mode is often more used, in this text the multi-modes state Wigner function is also approached. Our numerical investigations indicate that the reconstructed method using back-projection add some error due the choice of cutoff frequency, therefore it is necessary to use data post-processing, like the semi-definite programs, which provides sufficient conditions correctly estimate the state. Once the information about the state is recovered, important features such as entanglement can also be investigated.
A method for characterising the wave-function of freely-propagating particles would provide a useful tool for developing quantum-information technologies with single electronic excitations. Previous continuous-variable quantum tomography techniques developed to analyse electronic excitations in the energy-time domain have been limited to energies close to the Fermi level. We show that a wide-band tomography of single-particle distributions is possible using energy-time filtering and that the Wigner representation of the mixed-state density matrix can be reconstructed for solitary electrons emitted by an on-demand single-electron source. These are highly localised distributions, isolated from the Fermi sea. While we cannot resolve the pure state Wigner function of our excitations due to classical fluctuations, we can partially resolve the chirp and squeezing of the Wigner function imposed by emission conditions and quantify the quantumness of the source. This tomography scheme, when implemented with sufficient experimental resolution, will enable quantum-limited measurements, providing information on electron coherence and entanglement at the individual particle level.
In this work, a continuous variable quantum tomography is presented. This is done using two approaches, one using simulated data and another one using data from measurements performed in the laboratory. The Radon inverse transform, under the approximation of filtered back projection, alongside the details on the implementa- tion of balanced homodyne detection needed to perform the tomography are clearly explained. Density matrices in the quadrature and number representation are also obtained from the Wigner function. Additionally, complete documentation of the computational implementation and a user-friendly interface for the tomography is reported
We investigate properties of quantum mechanical systems in the light of quantum information theory. We put an emphasize on systems with infinite-dimensional Hilbert spaces, so-called continuous-variable systems'', which are needed to describe quantum optics beyond the single photon regime and other Bosonic quantum systems. We present methods to obtain a description of such systems from a series of measurements in an efficient manner and demonstrate the performance in realistic situations by means of numerical simulations. We consider both unconditional quantum state tomography, which is applicable to arbitrary systems, and tomography of matrix product states. The latter allows for the tomography of many-body systems because the necessary number of measurements scales merely polynomially with the particle number, compared to an exponential scaling in the generic case. We also present a method to realize such a tomography scheme for a system of ultra-cold atoms in optical lattices. Furthermore, we discuss in detail the possibilities and limitations of using continuous-variable systems for measurement-based quantum computing. We will see that the distinction between Gaussian and non-Gaussian quantum states and measurements plays an crucial role. We also provide an algorithm to solve the large and interesting class of naturally occurring Hamiltonians, namely frustration free ones, efficiently and use this insight to obtain a simple approximation method for slightly frustrated systems. To achieve this goals, we make use of, among various other techniques, the well developed theory of matrix product states, tensor networks, semi-definite programming, and matrix analysis.
Summary form only given. Experimental techniques for measurement of the quantum state of light have been the subject of intensive investigation for some time. Tomographic techniques have been applied to experiments such as the homodyne measurement of the Wigner function of a single mode of light and of the density matrix of the polarization degrees of freedom of a pair of entangled photons. In this technique, the density matrix (or Wigner function) which characterizes the quantum state of the system being measured is found from a linear transformation of experimental data. There are a number of drawbacks to the method, principally in that the recovered state might not, because of experimental noise, correspond to a physical state. For example, density matrices for any quantum state must be Hermitian, positive semi-definite matrices with unit trace. The tomographically measured matrices often fail to be positive semi-definite. To avoid this problem, the maximum likelihood approach to the estimation of quantum states has been developed. We evaluate two different approaches to the maximum likelihood technique, namely defining the likelihood function f as a weighted sum of squared variances from measured data, and defining it in terms of information content. These are compared with results of standard tomographical schemes.
Quantum state tomography is a fundamental tool in quantum information processing. It allows us to estimate the state of a quantum system by measuring different observables on many identically prepared copies of the system. This is, in general, a very time-consuming task that requires a large number of measurements. There are, however, systems in which the data acquisition can be done more efficiently. In fact, an ensemble of quantum systems can be prepared and manipulated by external fields while being continuously and collectively probed, producing enough information to estimate its state. This provides a basis for continuous measurement quantum tomography. In this protocol, an ensemble of identically prepared systems is collectively probed and controlled in a time-dependent manner to create an informationally complete continuous measurement record. The measurement history is then inverted to determine the state at the initial time. We use two different estimation methods: maximum likelihood and compressed sensing. The general formalism is applied to the case of reconstruction of the quantum state encoded in the magnetic sub-levels of a large-spin alkali atom, 133{}^{133}133Cs. We apply this protocol to the case of reconstruction of states in the full 16-dimensional electronic-ground subspace (F=3⊕F=4F=3 \oplus F=4F=3⊕F=4), controlled by microwaves and radio-frequency magnetic fields. We present an experimental demonstration of continuous measurement quantum tomography in an ensemble of cold cesium atoms with full control of its 16-dimensional Hilbert space. We show the exquisite level of control achieved in the lab and the excellent agreement between the theory discussed in this dissertation and the experimental results. This allows us to achieve fidelities >95% for low complexity quantum states, and >92% for arbitrary random states, which is a formidable accomplishment for a space of this size.
In quantum technologies, continuous-variable systems offer advantages over their discrete counterparts. However, continuous-variable tomography suffers from exponentially growing sample complexity. We propose protocols using quantum mirrors to transfer the complete information of incident photonic states onto a control atomic system. This enables full photonic state characterization through measurements on the control atom alone, realized via kernel functions, direct wavefunction reconstruction, and pointwise Wigner function measurements. Our approach overcomes the limitations of conventional photon counting, statistical inference, and inverse transformation, providing a robust framework for benchmarking and verifying non-Gaussian states in continuous-variable quantum optics.