Quantum repeaters, which are indispensable for long-distance quantum communication, are necessary for extending the entanglement from short distance to long distance; however, high-rate entanglement distribution, even between adjacent repeater nodes, has not been realized. In a recent work by [C. Jones et al., New J. Phys. 18 (2016) 083015], the entanglement distribution rate between adjacent repeater nodes was calculated for a plurality of quantum dots, nitrogen-vacancy centers in diamond, and trapped ions adopted as quantum memories inside the repeater nodes. Considering practical use, arranging a plurality of quantum memories becomes so difficult with the state-of-the art technology. It is desirable that high-rate entanglement distribution is realized with as few memory crystals as possible. Here, we propose new entanglement distribution scheme with one quantum memory based on the atomic frequency comb which enables temporal multimode operation with one crystal. The adopted absorptive-type quantum memory degrades the difficulty of multimode operation compared with the previously investigated quantum memories directly generating spin-photon entanglement. It is shown that this scheme improves the distribution rate by nearly two orders of magnitude compared with the result in [C. Jones et al., New J. Phys. 18 (2016) 083015] and the experimental implementation is close by utilizing state-of-the-art technology.
Quantum repeaters, which are indispensable for long-distance quantum communication, are necessary for extending the entanglement from short distance to long distance; however, high-rate entanglement distribution, even between adjacent repeater nodes, has not been realized. In a recent work by [C. Jones et al., New J. Phys. 18 (2016) 083015], the entanglement distribution rate between adjacent repeater nodes was calculated for a plurality of quantum dots, nitrogen-vacancy centers in diamond, and trapped ions adopted as quantum memories inside the repeater nodes. Considering practical use, arranging a plurality of quantum memories becomes so difficult with the state-of-the art technology. It is desirable that high-rate entanglement distribution is realized with as few memory crystals as possible. Here, we propose new entanglement distribution scheme with one quantum memory based on the atomic frequency comb which enables temporal multimode operation with one crystal. The adopted absorptive-type quantum memory degrades the difficulty of multimode operation compared with the previously investigated quantum memories directly generating spin-photon entanglement. It is shown that this scheme improves the distribution rate by nearly two orders of magnitude compared with the result in [C. Jones et al., New J. Phys. 18 (2016) 083015] and the experimental implementation is close by utilizing state-of-the-art technology.
Quantum communication between two remote locations often involves remote parties sharing an entangled quantum state. At present, entanglement distribution is usually performed using photons transmitted through optical fibers. However, the absorption of light in the fiber limits the communication distances to less than 200 km, even for optimal photon telecom wavelengths. To increase this distance, the quantum repeater idea was proposed. In the quantum repeater architecture, one divides communication distance into segments of the order of the attenuation length of the photons and places quantum memory nodes at the intermediate locations. Since the photon loss between intermediate locations is low, it is possible then to establish entanglement between intermediate quantum memory nodes. Once entanglement between adjacent nodes is established, one can extend it over larger distances using entanglement swapping.\n\nThe long coherence time of a quantum memory is a crucial requirement for the quantum repeater protocol. It is obvious that the coherence time of a quantum memory should be much longer that the time it takes for light to travel between remote locations. For a communication distance l = 1000 km, the corresponding time is t = l/c = 3.3 ms. One can show that for a simple repeater protocol and realistic success probabilities of entanglement generation, the required coherence time should be on the order of many seconds, while for the more complicated protocols that involve multiplexing and several quantum memory cells per intermediate node, the required coherence time is on the order of milliseconds.\n\nIn this thesis, I describe a quantum memory based on an ensemble of rubidium atoms confined in a one-dimensional optical lattice. The use of the magnetically- insensitive clock transition and suppression of atomic motion allows us to increase coherence time of the quantum memory by two-orders of magnitude compared to previous work. I also propose a method for determining the Zeeman content of atomic samples. In addition, I demonstrate the observation of quantum evolution under continuous measurement. The long quantum memory lifetime demonstrated in this work opens the way for scalable processing of quantum information and long distance quantum communication.
As the reach of quantum technologies extends ever further in communication and information science, a reliable way of transferring quantum information between distant locations becomes ever more crucial. While photons are widely accepted as excellent carriers due to their speed and low decoherence, losses of transmission (in free space or fibre) and the impossibility of cloning quantum information still pose a great challenge. The quantum repeater architecture was suggested as a solution to both problems [1]. In a quantum repeater the information encoded in an input state is transferred to a new one through entanglement swapping, that is then sent on along the channel. In this work we present our advances towards the realisation of a quantum repeater. Our system of choice combines a solid-state quantum memory with a source of photon pairs. The memory is based on a Rare-Earth Doped crystal, where quantum information can be stored in Pr3+ ions as a collective excitation using the Atomic Frequency Comb technique. On demand retrieval of the information is realised by transferring the excitation to a long-lived spin state. Record values of storage times and retrieval efficiencies have been demonstrated in this system [2]. Entangled pairs of single photons are generated by parametric down conversion in a periodically poled crystal placed inside a bow-tie cavity. This allows us to generate narrow band photons pairs, where the signal is spectrally matched to the memory (606nm), while the idler is in the telecom band [3]. Such a configuration allows us to benefit from the high performance of the memory, that also allows for temporal [2] and frequency [4] multimodality, while at the same time overcoming the high optical losses of 606nm photons by pair generation of a telecom photon. The first stepping stone, progress towards which is presented in this work, is the successful demonstration of energy-time entanglement between the telecom idler photon and the signal photon, stored as spin-wave excitation. The entanglement of the original pair is maintained by the memory temporal multimodality. The entanglement analysis will be made through time-bin qubit analysers made of a fibre-based Mach-Zehnder interferometer, for the former, and a solid-state equivalent based on two AFC with different storage times, for the latter [5]. In this direction we have already doubled the efficiency of the AFC storage protocols, that will be beneficial to count rates and signal-to-noise ratio. With respect to [2], we also increased the spectral-matching between the source and the memory [4]. Our experiment will provide an increase in storage time of 3 orders of magnitude with respect to previous demonstrations, as well as introducing for the first time on-demand read-out in a highly multi-mode memory. Demonstration of the successful transfer of quantum information between the signal photon and the long-lived solid-state excitation will open the way to the demonstration of long-distance entanglement between individual nodes in a quantum network.
Abstract Feasible distribution of quantum entanglement over long distances remains a fundamental step towards quantum secure communication and quantum network implementations. Quantum repeater nodes based on quantum memories promise to overcome exponential signal decay inherent to optical implementations of quantum communication. While performance of current quantum memories hinders their practical application, multimode solutions with multiplexing can offer tremendous increase in entanglement distribution rates. We propose to use a wavevector-multiplexed atomic quantum memory (WV-MUX-QM) as a fundamental block of a multiplexed quantum repeater architecture. We show the WV-MUX-QM platform to provide quasi-deterministic entanglement generation over extended distances, mitigating the fundamental issue of optical loss even with currently available quantum memory devices, and exceeding performance of repeaterless solutions as well as other repeater-based protocols such as temporal multiplexing. We establish the entangled-bit (ebit) rate per number of employed nodes as a practical figure of merit reflecting the cost-efficiency of larger inter-node distances.
Future quantum networks will enable fascinating applications such as secure communication, quantum-enhanced distributed sensing, distributed quantum computing, and accurate global timekeeping. Center to these applications is quantum entanglement distribution, whose effective distance is limited by photon loss. Quantum repeaters were proposed to extend the effective distance, but their demonstration has not been reported yet. In this thesis, we study quantum repeaters with both single-emitter based and ensemble-based quantum memories. In particular, we study the feasibility of meaningful proof-of-principle demonstrations of several quantum repeater protocols (with two-links) with photon (single-photon and photon-pair) sources and atomic-ensemble based quantum memories. We take into account non-unit memory efficiencies that decay exponentially with time, which is more realistic and accurate compared to previous treatments. We discuss implementations based on quantum dots, parametric down-conversion, rare-earth-ion doped crystals, and Rydberg atoms. Our results provide guidance for the near-term implementation of long-distance quantum repeater demonstrations, suggesting that such demonstrations are within reach of current technology.
Long-distance transfer of quantum information is an essential ability for many applications of quantum science. A natural choice to distribute quantum information is to encode it into photons and transfer it through optical fibers. However, due to the unavoidable transmission losses present in every communication channel, the distances for efficient quantum communication via direct-state transfer are limited to a few hundred kilometers. To overcome this limitation, the use of quantum repeaters has been suggested. A quantum repeater protocol aims to establish entanglement (i.e., quantum correlation) between remote nodes by first generating entanglement over shorter distance pieces, storing it in quantum memories, and finally extending it to the whole distance using entanglement swapping. The main goal of this thesis is to design quantum repeater architectures using single solid-state quantum emitters and to develop the two-qubit gates required for performing entanglement swapping. We first explain the basic ideas of quantum repeaters and introduce potential material candidates, single erbium (168Er) and europium (151Eu) ions doped yttrium orthosilicate photonic crystals. Next, we propose a quantum repeater scheme combing erbium and europium ions to generate and distribute entanglement over long distances. We study the entanglement generation rate of the protocol and compare it with the rate of a well-known ensemble-based quantum repeater. Then, using cavity assisted interactions, we propose three different schemes to perform high fidelity two-qubit gates between single quantum systems. We quantify their expected performance in detail by taking into account many realistic imperfections and compare their strengths and weaknesses. The ability to perform local two-qubits gates is especially crucial in terms of distributing entanglement. Finally, based on our gained knowledge through these projects, we propose our second quantum repeater architecture based on erbium (167Er) ions, which outperforms the first scheme. We study two possibilities for distributing entanglement and calculate the overall fidelity as well as the distribution rate of the protocol.
Quantum repeaters enable the generation of reliable entanglement across long distances despite the underlying channel noise. Nevertheless, realizing quantum repeaters poses a difficult engineering challenge due to various device constraints and design tradeoffs. Herein we propose and analyze an efficient hybrid quantum repeater design that integrates atom-based quantum processing units, spontaneous parametric down-conversion photon sources, and atomic frequency comb quantum memories. Our design leverages the strong spectrotemporal multiplexing capability of the quantum memory to enable high-rate elementary-link entanglement generation between repeater nodes. Transferring the photonic entanglement into matter-qubit entanglement, together with deterministic quantum operations, further enables reliable long-distance entanglement distribution. We analyze photon-loss channels in the hybrid architecture and propose suitable error-suppression strategies that are natively incorporated into our repeater protocol. Using numerical simulations, we demonstrate the advantages of our hybrid design for end-to-end secret key rates in a linear repeater-chain model. With continued advances in relevant hardware technologies, we envision that the proposed hybrid design is well suited for large-scale quantum networks.