Challenges
Datasets
Workspaces
Papers
Discussions
Leaderboard
Log inSign up
Challenges
Datasets
Workspaces
Papers
Discussions
Leaderboard
Blog
Job Board
Q3AS

© 2026 Aqora Quantum S.A.S.

TermsPrivacyLegal Notice

arXiv:1910.07970 · IEEE Aerospace and Electronic Systems Magazine

Rydberg Atoms for Radio-Frequency Communications and Sensing: Atomic Receivers for Pulsed RF Field and Phase Detection

David Alexander Anderson, Rachel Sapiro, Georg A. Raithel

Published Apr 1, 2020• 94 citations
arXivHTMLPDF

Abstract

We report on the development of detection methods for amplitude and phase of pulsed radio-frequency (RF) electromagnetic fields with Rydberg atoms. We begin with an overview of the basic principles of Rydberg-atom-based sensing and measurement of RF electromagnetic fields. An overview of the underlying atomic physics and the method for amplitude as well as phase sensing of electromagnetic radiation with Rydberg atoms is provided. Atomic RF receivers using Rydberg atoms for analog and digital communications and sensing of modulated RF fields are discussed. Detection of pulse-modulated RF and time-domain RF pulse waveform imaging with a Rydberg-atom receiver are demonstrated. The transient response of the Rydberg-atom vapor to a modulated RF field is observed at the 10-nanosecond level, from which a new lower limit to the achievable instantaneous signal bandwidth of atomic RF receivers is established. Finally, we present and describe a new method to measure the phase of an RF field implemented to not require an RF reference wave. The method employs phase-coherent excitation pathways involving the optical fields in the atomic sensing medium with the signal RF field. The optical RF phase-sensing approach lends itself to the realization of atomic RF sensors, measurement and imaging devices that are relevant to applications in RF communications and sensing.

DOI
10.1109/maes.2019.2960922

Related papers

Rydberg Atomic Receiver for Wireless Physical Layer: A Survey

Minze Chen, Mingyao Cui, Zhiao Zhu +6 more

With the escalating development of the quantum information technologies, the Rydberg atomic receiver has been envisioned as a promising alternative to its classical electronic counterparts, attracting extensive attentions from both physics and electronic engineering disciplines. By exploiting the electrical acuteness of Alkali atoms with diverse Rydberg energy states for electromagnetic field measurement, Rydberg atomic receiver is capable of surmounting the inherent limitations on the operating bandwidth and detection sensitivity of the classical electronic counterparts. Against this background, this article provides an extensive overview of Rydberg atomic communication and sensing from fundamental theory, critical technologies to practical implementations. Firstly, the milestones of the Rydberg atomic receiver evolution was introduced. Then we provide a clear understanding of Rydberg atomic receiver mechanisms from the perspective of classical communication and sensing, and highlight the unprecedented advantages over traditional electronic receivers as well as the technical challenges. Afterwards, necessary fundamentals are presented including the Rydberg atoms, typical non-coherent/coherent structures, and explicit experimental configurations, followed by discussions on state-of-the-art development of the Rydberg atomic receiver. Specifically, advancements on electric-field detection methods for accurate measurement of amplitude, phase, frequency and polarization, are extensively investigated. Based on the established methodologies, recent innovations in Rydberg atomic communication and sensing are reviewed, ranging from waveform design and array-based signal processing to radar applications like localization, imaging and remote sensing, with practical experimental results presented. Finally, we summarize the promising research trends around Rydberg atomic receiver.

physics.atom-phCross-listedarXiv:2610.25462•Oct 20, 2026•0 citations

Quantum-Based Amplitude Modulation Radio Receiver Using Rydberg Atoms

Zhenfei Song, Wanfeng Zhang, Xiaochi Liu +4 more

The highly-excited Rydberg states are with a unique property of radio-frequency (RF) resonance, and Rydberg atoms at room temperature are promising for developing a broadband RF electric field sensor and relevant metrology standards. In this paper, the working mechanism of an atomic amplitude-modulation(AM) radio receiver is investigated in detail, and various factors affecting the communication quality are discussed. The modulation RF signal can be directly retrieved by measuring the transmission of a probe laser at resonance of rubidium D2 transition using a fast photo-diode detector, without any conventional demodulation process. Various communication experiments are tested at a 10.22 GHz carrier, and a modulation bandwidth of 1 MHz and an acceptable data transfer rate of about 1 Mbps have been achieved using current detection techniques. Owing to a potential high sensitivity and ultra-broadband capability of free-space RF field sensing, the quantum receiver has great significance compared with conventional electronics-based receivers, including but not limited to a weak signal, long-distance, and broadband communication in free space or via a fiber link.

IEEE Globecom Workshops (GC Wkshps)•Dec 1, 2018•9 citations

Rydberg Atom RF Sensing: State of the Art, Principles, Metrics, and Roadmaps

Anu Babusenan, Fr´ed´eric Munoz, Jean-Baptiste Qu´elene +1 more

Rydberg-atom-based electrometry provides a quantum, SI-traceable approach to radio-frequency (RF) and microwave electric-field sensing by linking optical spectra to absolute field strength through electromagnetically induced trans parency. Over the past decade, rapid advances in excitation schemes, field-tuning methods, interferometric readout, and cavity-assisted coupling have significantly improved sensitivity, bandwidth, and tunability of Rydberg-based sensors. In parallel, progress in fiber-coupled modules, microfabricated vapor cells, and photonic integration is enabling compact and deployable receiver architectures. This review presents a comprehensive and metrology-oriented synthesis of the physical principles, system architectures, standardized performance metrics, and uncertainty considerations relevant to Rydberg-atom RF sensing. By con solidating diverse developments into a unified performance and evaluation framework, this work provides a critical reference for the design, comparison, and advancement of next-generation quantum RF sensors and standards.

IEEE Sensors Reviews•Jan 1, 2026•1 citation

Applications with a Rydberg Atom-based Radio Frequency Antenna/Receiver

Matthew T. Simons, Abdulaziz H. Haddab, Joshua A. Gordon +1 more

We discuss several recent extensions of quantum radio frequency (RF) electric field sensors to antenna/receiver applications. These Rydberg atom-based sensors have been previously studied for SI-traceable RF field measurements. We demonstrate the reception of modulated signals, including analog audio and pseudorandom bit sequences, RF phase detection, weak field detection, and the recording of musical instruments.

International Symposium on Electromagnetic Compatibility - EMC Europe (EMC Europe)•Sep 1, 2019•14 citations

All-optical RF phase sensing with Rydberg atoms: a comparison of 3-photon transient and 4-photon closed-loop dynamics

Hongqiao Zhang, Pinrui Shen, Hanna Lippmann +2 more

Rydberg atoms have emerged as a highly sensitive platform for radio frequency sensing, though conventional schemes primarily focus on rf amplitude rather than phase detection. In this work, we present a comparative study of two approaches for Rydberg-atom-based rf phase sensing: a 3-photon ladder and a 4-photon closed-loop scheme. We evaluate their underlying physical mechanisms, dependence on the rf Rabi frequency, and responses to phase-modulated sequences. We show that the 3-photon approach extracts rf phase and detuning indirectly from the amplitude and frequency components of transient oscillations, which are limited by a short coherence time (∼ 0.7 μs) and result in a nonlinear readout dependent on the incident rf field strength. The 4-photon closed-loop scheme imprints phase-carrying oscillations onto the probe transmission, which achieves direct rf phase measurement with an extended coherence time of ∼ 1 ms and provides a linear phase readout.

Photonics for Quantum (PfQ)•Jul 22, 2026•0 citations

Coherent Rydberg-atom engineering for radio-frequency sensing

Matthias Schmidt

In this work, theoretical and experimental works on Rydberg-atom based radio-frequency (RF) sensors are presented. The results were obtained in close collaboration with the Quantum Valley Ideas Lab, whose goal is the miniaturization and prototyping of these sensors. The Rydberg-atom based RF sensors utilize lasers to coherently excite an atomic vapor in a vapor cell at room temperature to a highly excited Rydberg state, which is extremely sensitive to external environmental influences. In this work, Rydberg-atom based RF sensing is described as coherent multi-photon interference in the atom-light coupled system by introducing atom-light coherences. The presence of the RF wave influences the absorption of a probe laser propagating through the atomic medium. The atomic response of the Rydberg-atoms can be engineered by changing the atom-light coherences through laser power and frequency. Analytic expressions for the atomic response to the incident RF wave are derived in the weak probe limit and provide a deeper understanding of the underlying coherent multi-photon interference processes, which help to further tailor the Rydberg-atom for the purpose of the application. Good agreement with full numerical simulations of the Lindblad-master equation is found. An analysis of the various Doppler limits strongly motivates an excitation scheme where the effective wave vector mismatch on the Rydberg transition vanishes, as a promising candidate to achieve narrower spectral linewidths and, consequently, a higher sensitivity. The level structure of cesium presents a unique three-photon excitation scheme where residual Doppler shifts become comparable to the spectral linewidth of the coupling lasers. The experimental realization of this excitation scheme is demonstrated. A spectral linewidth of the Rydberg transition of 190 kHz is achieved. The measurements present the world record sensitivity, 45 nV/cm/Hz^1/2, for all-optical RF sensing with room temperature operation. These results make the three-photon excitation scheme a prime candidate for the next generation of Rydberg-atom based RF sensor prototypes. Finally, all-optical phase-sensitive RF detection is theoretically investigated in a closed-loop excitation scheme. An analytic expression is derived that intuitively describes the atomic response. Furthermore, it provides insights into the probe intensity dynamics that occur when the system is operated under finite detuning. These oscillatory dynamics allow for the extraction of the in- (I) and out- (Q) of-phase response to the RF wave, thereby enabling the simultaneous detection of the RF E-field amplitude and phase. A blueprint for the experimental realization is presented, and angle-of-arrival tolerances for the RF wave are estimated. A quadrature amplitude modulation (QAM) sequence was modelled and the simultaneous extraction of the phase and amplitude of the RF wave of interest was successfully demonstrated.

•Jan 1, 2025•0 citations
We report on the development of detection methods for amplitude and phase of pulsed radio-frequency (RF) electromagnetic fields with Rydberg atoms. We begin with an overview of the basic principles of Rydberg-atom-based sensing and measurement of RF electromagnetic fields. An overview of the underlying atomic physics and the method for amplitude as well as phase sensing of electromagnetic radiation with Rydberg atoms is provided. Atomic RF receivers using Rydberg atoms for analog and digital communications and sensing of modulated RF fields are discussed. Detection of pulse-modulated RF and time-domain RF pulse waveform imaging with a Rydberg-atom receiver are demonstrated. The transient response of the Rydberg-atom vapor to a modulated RF field is observed at the 10-nanosecond level, from which a new lower limit to the achievable instantaneous signal bandwidth of atomic RF receivers is established. Finally, we present and describe a new method to measure the phase of an RF field implemented to not require an RF reference wave. The method employs phase-coherent excitation pathways involving the optical fields in the atomic sensing medium with the signal RF field. The optical RF phase-sensing approach lends itself to the realization of atomic RF sensors, measurement and imaging devices that are relevant to applications in RF communications and sensing.
With the escalating development of the quantum information technologies, the Rydberg atomic receiver has been envisioned as a promising alternative to its classical electronic counterparts, attracting extensive attentions from both physics and electronic engineering disciplines. By exploiting the electrical acuteness of Alkali atoms with diverse Rydberg energy states for electromagnetic field measurement, Rydberg atomic receiver is capable of surmounting the inherent limitations on the operating bandwidth and detection sensitivity of the classical electronic counterparts. Against this background, this article provides an extensive overview of Rydberg atomic communication and sensing from fundamental theory, critical technologies to practical implementations. Firstly, the milestones of the Rydberg atomic receiver evolution was introduced. Then we provide a clear understanding of Rydberg atomic receiver mechanisms from the perspective of classical communication and sensing, and highlight the unprecedented advantages over traditional electronic receivers as well as the technical challenges. Afterwards, necessary fundamentals are presented including the Rydberg atoms, typical non-coherent/coherent structures, and explicit experimental configurations, followed by discussions on state-of-the-art development of the Rydberg atomic receiver. Specifically, advancements on electric-field detection methods for accurate measurement of amplitude, phase, frequency and polarization, are extensively investigated. Based on the established methodologies, recent innovations in Rydberg atomic communication and sensing are reviewed, ranging from waveform design and array-based signal processing to radar applications like localization, imaging and remote sensing, with practical experimental results presented. Finally, we summarize the promising research trends around Rydberg atomic receiver.
The highly-excited Rydberg states are with a unique property of radio-frequency (RF) resonance, and Rydberg atoms at room temperature are promising for developing a broadband RF electric field sensor and relevant metrology standards. In this paper, the working mechanism of an atomic amplitude-modulation(AM) radio receiver is investigated in detail, and various factors affecting the communication quality are discussed. The modulation RF signal can be directly retrieved by measuring the transmission of a probe laser at resonance of rubidium D2 transition using a fast photo-diode detector, without any conventional demodulation process. Various communication experiments are tested at a 10.22 GHz carrier, and a modulation bandwidth of 1 MHz and an acceptable data transfer rate of about 1 Mbps have been achieved using current detection techniques. Owing to a potential high sensitivity and ultra-broadband capability of free-space RF field sensing, the quantum receiver has great significance compared with conventional electronics-based receivers, including but not limited to a weak signal, long-distance, and broadband communication in free space or via a fiber link.
Rydberg-atom-based electrometry provides a quantum, SI-traceable approach to radio-frequency (RF) and microwave electric-field sensing by linking optical spectra to absolute field strength through electromagnetically induced trans parency. Over the past decade, rapid advances in excitation schemes, field-tuning methods, interferometric readout, and cavity-assisted coupling have significantly improved sensitivity, bandwidth, and tunability of Rydberg-based sensors. In parallel, progress in fiber-coupled modules, microfabricated vapor cells, and photonic integration is enabling compact and deployable receiver architectures. This review presents a comprehensive and metrology-oriented synthesis of the physical principles, system architectures, standardized performance metrics, and uncertainty considerations relevant to Rydberg-atom RF sensing. By con solidating diverse developments into a unified performance and evaluation framework, this work provides a critical reference for the design, comparison, and advancement of next-generation quantum RF sensors and standards.
Rydberg atoms have emerged as a highly sensitive platform for radio frequency sensing, though conventional schemes primarily focus on rf amplitude rather than phase detection. In this work, we present a comparative study of two approaches for Rydberg-atom-based rf phase sensing: a 3-photon ladder and a 4-photon closed-loop scheme. We evaluate their underlying physical mechanisms, dependence on the rf Rabi frequency, and responses to phase-modulated sequences. We show that the 3-photon approach extracts rf phase and detuning indirectly from the amplitude and frequency components of transient oscillations, which are limited by a short coherence time (∼ 0.7 μs) and result in a nonlinear readout dependent on the incident rf field strength. The 4-photon closed-loop scheme imprints phase-carrying oscillations onto the probe transmission, which achieves direct rf phase measurement with an extended coherence time of ∼ 1 ms and provides a linear phase readout.
In this work, theoretical and experimental works on Rydberg-atom based radio-frequency (RF) sensors are presented. The results were obtained in close collaboration with the Quantum Valley Ideas Lab, whose goal is the miniaturization and prototyping of these sensors. The Rydberg-atom based RF sensors utilize lasers to coherently excite an atomic vapor in a vapor cell at room temperature to a highly excited Rydberg state, which is extremely sensitive to external environmental influences. In this work, Rydberg-atom based RF sensing is described as coherent multi-photon interference in the atom-light coupled system by introducing atom-light coherences. The presence of the RF wave influences the absorption of a probe laser propagating through the atomic medium. The atomic response of the Rydberg-atoms can be engineered by changing the atom-light coherences through laser power and frequency. Analytic expressions for the atomic response to the incident RF wave are derived in the weak probe limit and provide a deeper understanding of the underlying coherent multi-photon interference processes, which help to further tailor the Rydberg-atom for the purpose of the application. Good agreement with full numerical simulations of the Lindblad-master equation is found. An analysis of the various Doppler limits strongly motivates an excitation scheme where the effective wave vector mismatch on the Rydberg transition vanishes, as a promising candidate to achieve narrower spectral linewidths and, consequently, a higher sensitivity. The level structure of cesium presents a unique three-photon excitation scheme where residual Doppler shifts become comparable to the spectral linewidth of the coupling lasers. The experimental realization of this excitation scheme is demonstrated. A spectral linewidth of the Rydberg transition of 190 kHz is achieved. The measurements present the world record sensitivity, 45 nV/cm/Hz^1/2, for all-optical RF sensing with room temperature operation. These results make the three-photon excitation scheme a prime candidate for the next generation of Rydberg-atom based RF sensor prototypes. Finally, all-optical phase-sensitive RF detection is theoretically investigated in a closed-loop excitation scheme. An analytic expression is derived that intuitively describes the atomic response. Furthermore, it provides insights into the probe intensity dynamics that occur when the system is operated under finite detuning. These oscillatory dynamics allow for the extraction of the in- (I) and out- (Q) of-phase response to the RF wave, thereby enabling the simultaneous detection of the RF E-field amplitude and phase. A blueprint for the experimental realization is presented, and angle-of-arrival tolerances for the RF wave are estimated. A quadrature amplitude modulation (QAM) sequence was modelled and the simultaneous extraction of the phase and amplitude of the RF wave of interest was successfully demonstrated.