The interaction of photons and coherent quantum systems can be employed to detect electromagnetic radiation with remarkable sensitivity. We introduce a quantum radiometer based on the photon-induced dephasing process of a superconducting qubit for sensing microwave radiation at the subunit photon level. Using this radiometer, we demonstrate the radiative cooling of a 1 K microwave resonator and measure its mode temperature with an uncertainty ∼0.01 K. We thus develop a precise tool for studying the thermodynamics of quantum microwave circuits, which provides new solutions for calibrating hybrid quantum systems and detecting candidate particles for dark matter.
The interaction of photons and coherent quantum systems can be employed to detect electromagnetic radiation with remarkable sensitivity. We introduce a quantum radiometer based on the photon-induced dephasing process of a superconducting qubit for sensing microwave radiation at the subunit photon level. Using this radiometer, we demonstrate the radiative cooling of a 1 K microwave resonator and measure its mode temperature with an uncertainty ∼0.01 K. We thus develop a precise tool for studying the thermodynamics of quantum microwave circuits, which provides new solutions for calibrating hybrid quantum systems and detecting candidate particles for dark matter.
Quantum sensing is a rapidly expanding research field that finds one of its applications in fundamental physics, as the detection of light Dark Matter. Qubit-based superconducting devices have already been successfully applied in detecting few-GHz single photons via Quantum Non-Demolition measurements. The optimization and new design schemes of circuits embedding qubits will yield notable enhancements in sensitivity and suppression of dark count rates in experiments involving high-precision microwave photon detection, particularly in the search for Axions and Dark Photons. The Qub-It collaboration is developing a novel microwave photon detection scheme based on two qubits coupled to the same resonator, both in 2D and 3D formats.
The detection of single microwave photons is becoming a cornerstone of fundamental experiments in circuit quantum electrodynamics and quantum sensing. Experiments in cavity quantum electrodynamics, photon-mediated entanglement, dark-matter axion searches and quantum thermodynamics increasingly rely on single-photon sensitivity. Current technologies exploit superconducting devices, including Josephson parametric detectors, and transmon-based non-demolition counters for dark-matter haloscopes. Hybrid double quantum dot-Josephson systems reach interesting levels of efficiency, while current-biased Josephson junctions show potential for near-quantumlimited resolution. Despite impressive progress, challenges remain in reducing dark counts, improving reset speed, and scaling for multiplexed arrays. Continued advances in superconducting materials, qubit coherence, and hybrid semiconductor-superconductor designs promise to extend detection efficiency and bandwidth. These developments are poised to enable the next generation of quantum-enabled experiments, from foundational tests in quantum optics to searches for new physics.
Superconducting qubits, though promising for both near-term problem-solving as well as the development of large-scale quantum computing systems, are limited in performance largely by materials-induced decoherence channels which are maximized at millikelvin temperatures, single photon powers, and microwave frequencies. Superconducting microwave resonators are ideal tools for measuring these materials losses due to their simplicity, well-understood behavior, and sensitivity to these same losses. In order to better understand and mitigate dominant qubit decoherence channels, accurate and precise characterization of superconducting microwave resonator performance is critical. In this paper, current measurement techniques for superconducting microwave resonators are discussed, including experimental set-up, error analysis, and cryogenic calibration of a vector network analyzer.
Manipulating the electromagnetic spectrum at the single-photon level is fundamental for quantum experiments. In the visible and infrared ranges, this can be accomplished with atomic quantum emitters, and with superconducting qubits such control is extended to the microwave range (below 10 GHz). Meanwhile, the region between these two energy ranges presents an unexplored opportunity for innovation. We bridge this gap by scaling up a superconducting qubit to the millimeter-wave range (near 100 GHz). Working in this energy range greatly reduces sensitivity to thermal noise compared to microwave devices, enabling operation at significantly higher temperatures, up to 1 K. This has many advantages by removing the dependence on rare 3 He for refrigeration, simplifying cryogenic systems, and providing orders-of-magnitude higher cooling power, lending the flexibility needed for novel quantum sensing and hybrid experiments. Using low-loss niobium trilayer junctions, we realize a qubit at 72 GHz cooled to 0.87 K using only 4 He . We perform Rabi oscillations to establish control over the qubit state, and measure relaxation and dephasing times of 15.8 and 17.4 ns, respectively. This demonstration of a millimeter-wave quantum emitter offers exciting prospects for enhanced sensitivity thresholds in high-frequency photon detection, provides new options for quantum transduction and for scaling up and speeding up quantum computing, enables integration of quantum systems where 3 He refrigeration units are impractical, and, importantly, paves the way for quantum experiments exploring a novel energy range.
Superconducting quantum bits (qubits) are a leading candidate towards realizing a processor that is able to outperform existing classical computers at select tasks. One particular qubit architecture, the transmon, boasts long coherence times compared to required gate lengths and flexibility with respect to circuit couplings as these 'artificial atoms' are photolithographically defined. These attributes allow qubits to be leveraged for other tasks as well — such as efficiently detecting itinerant microwave photons. Such a device may prove useful for remote entanglement protocols, quantum optics experiments in the microwave regime, and as a detector for low-mass dark matter.Through a blend of circuit quantum electrodynamics (cQED) and waveguide quantum electrodynamics (wQED) theories, high detector performance was achieved even when the photon arrival time was not known. Utilizing an ensemble (N = 4) of identical transmon absorbers, photon mediated interactions along a common waveguide enable absorbed itinerant photons to be trapped for longer than the inverse of the bandwidth of an individual qubit. This extended trapping time allows for sufficient integration of the dispersively shifted readout resonator to resolve deviations from vacuum with high fidelity.
Using modern micro and nano-fabrication techniques combined with superconducting materials we realize quantum electronic circuits in which we create, store, and manipulate individual microwave photons. The strong interaction of photons with superconducting quantum two-level systems allows us to probe fundamental quantum effects of microwave radiation and also to develop components for applications in quantum technology. Previously we have realized on-demand single photon sources which we have characterized using correlation function measurements [1] and full quantum state tomography [2]. For this purpose we have developed efficient methods to separate the quantum signals of interest from the noise added by the linear amplifiers used for quadrature amplitude detection [3]. We now regularly employ superconducting parametric amplifiers [4] to perform nearly quantum limited detection of propagating electromagnetic fields. These enable us to probe the entanglement which we generate on demand between stationary qubits and microwave photons freely propagating down a transmission line [5]. Using two independent microwave single photon sources, we have recently performed Hong-Ou-Mandel experiments at microwave frequencies [6] and have probed the coherence of two-mode multi-photon states at the out-put of a beam-splitter. The non-local nature of such states may prove to be useful for distributing entanglement in future small-scale quantum networks.