Quantum algorithms need to be compiled to respect the constraints imposed by quantum processors, which is known as the mapping problem. The mapping procedure will result in an increase of the number of gates and of the circuit latency, decreasing the algorithm’s success rate. It is crucial to minimize mapping overhead, especially for noisy intermediate-scale quantum (NISQ) processors that have relatively short qubit coherence times and high gate error rates. Most of prior mapping algorithms have only considered constraints, such as the primitive gate set and qubit connectivity, but the actual gate duration and the restrictions imposed by the use of shared classical control electronics have not been taken into account. In this article, we present a mapper called Qmap to make quantum circuits executable on scalable processors with the objective of achieving the shortest circuit latency. In particular, we propose an approach to formulate the classical control restrictions as resource constraints in a conventional list scheduler with polynomial complexity. Furthermore, we implement a routing heuristic to cope with the connectivity limitation. This router finds a set of movement operations that minimally extends circuit latency. To analyze the mapping overhead and evaluate the performance of different mappers, we map 56 quantum benchmarks onto a superconducting processor named Surface-17. Compared to a prior mapping strategy that minimizes the number of operations, Qmap can reduce the latency overhead (LtyOH) up to 47.3% and operation overhead up to 28.6%, respectively.
Quantum algorithms need to be compiled to respect the constraints imposed by quantum processors, which is known as the mapping problem. The mapping procedure will result in an increase of the number of gates and of the circuit latency, decreasing the algorithm’s success rate. It is crucial to minimize mapping overhead, especially for noisy intermediate-scale quantum (NISQ) processors that have relatively short qubit coherence times and high gate error rates. Most of prior mapping algorithms have only considered constraints, such as the primitive gate set and qubit connectivity, but the actual gate duration and the restrictions imposed by the use of shared classical control electronics have not been taken into account. In this article, we present a mapper called Qmap to make quantum circuits executable on scalable processors with the objective of achieving the shortest circuit latency. In particular, we propose an approach to formulate the classical control restrictions as resource constraints in a conventional list scheduler with polynomial complexity. Furthermore, we implement a routing heuristic to cope with the connectivity limitation. This router finds a set of movement operations that minimally extends circuit latency. To analyze the mapping overhead and evaluate the performance of different mappers, we map 56 quantum benchmarks onto a superconducting processor named Surface-17. Compared to a prior mapping strategy that minimizes the number of operations, Qmap can reduce the latency overhead (LtyOH) up to 47.3% and operation overhead up to 28.6%, respectively.
To execute a quantum program, it has to be compiled for execution on the target quantum processor. The program is first converted into a logical circuit composed of elementary gates supported by the target processor. Most often the logical circuit cannot be executed directly on the quantum processor due to the limited connectivity between the physical qubits of the processor. So, a quantum compiler needs to perform qubit routing by inserting auxiliary gates to execute operations like SWAP, MOVE, and BRIDGE in order to satisfy the connectivity constraint. Qubit routing yields a physical circuit that can be executed on the target processor. Finally, the physical circuit still has to be scheduled considering the gate delays and the control constraints imposed by the shared classical control electronics of the quantum processor. For noisy intermediate-scale quantum processors, it is important to minimize the latency of the final scheduled physical circuit. However, solving qubit routing without considering gate delays and control constraints will inevitably lead to suboptimal final results. Here we propose a control and timing-aware qubit routing algorithm, CTQr, considering gate delays and control constraints. Moreover, CTQr performs gate merging on the fly in order to minimize the final circuit latency. The experimental results show that CTQr outperforms the state-of-art approach with 11.2%, 8.8%, and 54.6% average reduction in the circuit latency, number of additional gates, and execution time, respectively.
Quantum computers have emerged as an alternative computer paradigm that will allow to solve some complex problems of large numbers that are not tractable for classical computers, e.g. factorization. Quantum computers also have the ability to simulate quantum mechanics in a real and direct way. The development of quantum computers faces many unique obstacles. In recent years, various quantum computer prototypes have been created by com- panies such as Google and IBM, on which we can run some quantum algorithms. But these prototypes are far from the quantum computers we envision and can function like today?s classical computers. It is said that we are in the time of Noisy Intermediate-Scale Quantum (NISQ) computers. This means that current quantum computers are very noisy and their size is very small compared to classical comput- ers. The challenge with small, noisy quantum devices running quantum algorithms is that due to the hardware limitations they face which must be respected, quantum algorithm needs to be modified before their execution on quantum devices. To solve this problem in quantum computers, a mapping process is needed, which is part of the compilation step that modifies the quantum algorithms to take into account all the limitations of the targeted quantum device. After mapping process, the resulting quantum circuit usually has a higher number of gates and (execution time) latency, decreasing the algorithm?s reliability. Different mapping solutions have been already proposed. Most of them are meant for a specific quan- tum processor and different in methodology, approach and features. In addition, they are usually only compared in terms of added gates (gate overhead) or added circuit execution time (latency overhead). No thorough comparative analysis of the different mapping solutions performance and features has been performed so far. In this thesis, we apply structured Design Space Exploration to the mapping of quantum circuits. By doing so, we will be able to have a deeper understanding of this process, make a thorough comparison of the mapper approaches and even develop optimized solutions for given applications and quantum devices. Moreover, we apply Design Space Exploration to the generation of quantum algorithms used as benchmarks and start to explore profiling them in a structured approach.
Quantum computing has been accumulating tremendous attention in recent years. In current superconducting quantum processors, each qubit can only be connected with a limited number of neighbors. Therefore, the original quantum circuit should be converted to a hardware-dependent circuit, and this process is called qubit mapping and routing, in which typically extra SWAP gates need to be inserted. Due to a limited qubit lifetime, one of the main objectives of qubit mapping and routing is to minimize the circuit depth, which is a time-consuming process. By studying several existing greedy mappers, we extract and analyze two patterns that significantly impact the mapping and routing performance. Then, we propose a sliding window method named SWin, which dramatically reduces the computational cost with negligible performance degradation. For devices with constrained executable circuit depth, we propose SWin+, which introduces adaptive circuit slicing methods with VF2++subgraph isomorphism initial mapping methods. Compared with the state-of-the-art greedy methods, SWin can find an effective result by up to 39% depth decrease, on average of 16% for large-scale circuits. Moreover, SWin can be easily modified to be noise-aware, while the depth reduction will yield better performance for real execution. Furthermore, SWin still performs well for various chip couplings. SWin+ significantly enhances processing efficiency, achieving improvements up to$22.3\times $, with an average increase of$6.1\times $. Concurrently, it maintains the effectiveness of the transformed circuit depth.
Due to several physical limitations in the realization of quantum hardware, today's quantum computers are qualified as noisy intermediate-scale quantum (NISQ) hardware. NISQ hardware is characterized by a small number of qubits (50 to a few hundred) and noisy operations. Moreover, current realizations of superconducting quantum chips do not have the ideal all-to-all connectivity between qubits but rather at most a nearest-neighbor connectivity. All these hardware restrictions add supplementary low-level requirements. They need to be addressed before submitting the quantum circuit to an actual chip. Satisfying these requirements is a tedious task for the programmer. Instead, the task of adapting the quantum circuit to a given hardware is left to the compiler. In this article, we propose a hardware-aware (HA) mapping transition algorithm that takes the calibration data into account with the aim to improve the overall fidelity of the circuit. Evaluation results on IBM quantum hardware show that our HA approach can outperform the state of the art, both in terms of the number of additional gates and circuit fidelity.
Quantum algorithm design usually assumes access to a perfect quantum computer with ideal properties like full connectivity, noise-freedom, and arbitrarily long coherence time. In noisy intermediate-scale quantum (NISQ) devices, however, the number of qubits is highly limited and quantum operation error and qubit coherence are not negligible. Besides, the connectivity of physical qubits in a quantum processing unit (QPU) is also strictly constrained. Thereby, additional operations like SWAP gates have to be inserted to satisfy this constraint while preserving the functionality of the original circuit. This process is known as quantum circuit transformation. Adding additional gates will increase both the size and depth of a quantum circuit and, therefore, cause further decay of the performance of a quantum circuit. Thus, it is crucial to minimize the number of added gates. In this article, we propose an efficient method to solve this problem. We first choose by using simulated annealing an initial mapping which fits well with the input circuit and then, with the help of a heuristic cost function, stepwise apply the best-selected SWAP gates until all quantum gates in the circuit can be executed. Our algorithm runs in time polynomial in all parameters, including the size and the qubit number of the input circuit, and the qubit number in the QPU. Its space complexity is quadratic to the number of edges in the QPU. The experimental results on extensive realistic circuits confirm that the proposed method is efficient and the number of added gates of our algorithm is, on average, only 57% of that of state-of-the-art algorithms on IBM Q20 (Tokyo), the most recent IBM quantum device.
Qubit Mapping is a critical task in Quantum Compilation, as modern Quantum Processing Units (QPUs) are constrained to nearest-neighbor interactions defined by a qubit coupling graph. This compiler pass repairs the connectivity of two-qubit gates whose operands are not adjacent by inserting SWAP gates that move the state of qubits between directly connected qubits. Deciding when to introduce SWAPs while minimizing their count is critical because the error in quantum programs increases exponentially with the circuit latency, measured in number of gates along the critical path of the circuit. Prior work for this problem relied on heuristics and exact methods that partition the circuit into two or more layers, but failed to exploit valuable dependence information in any form.This paper introduces a novel qubit mapping algorithm based on the weight of transitive dependences. The introduced mapper models quantum circuits with affine abstractions, thereby providing the ability to compute transitive dependences. In turn, the newfound information is used to partition circuits by dependence distances and compute, efficiently, distinct weights for each layer. We evaluate the efficiency of our mapper on IBM and Rigetti QPUs, using the large datasets from the QUEKO and QASMBench benchmark suites, and against four baseline tools (QMAP, Sabre, Cirq and TKET), demonstrating notable improvements in circuit depth and swap count while delivering competitive scalability.