Quantum error correction is an essential ingredient for universal quantum computing. Despite tremendous experimental efforts in the study of quantum error correction, to date, there has been no demonstration in the realisation of universal quantum error-correcting code, with the subsequent verification of all key features including the identification of an arbitrary physical error, the capability for transversal manipulation of the logical state and state decoding. To address this challenge, we experimentally realise the [5, 1, 3] code, the so-called smallest perfect code that permits corrections of generic single-qubit errors. In the experiment, having optimised the encoding circuit, we employ an array of superconducting qubits to realise the [5, 1, 3] code for several typical logical states including the magic state, an indispensable resource for realising non-Clifford gates. The encoded states are prepared with an average fidelity of [Formula: see text] while with a high fidelity of [Formula: see text] in the code space. Then, the arbitrary single-qubit errors introduced manually are identified by measuring the stabilisers. We further implement logical Pauli operations with a fidelity of [Formula: see text] within the code space. Finally, we realise the decoding circuit and recover the input state with an overall fidelity of [Formula: see text], in total with 92 gates. Our work demonstrates each key aspect of the [5, 1, 3] code and verifies the viability of experimental realisation of quantum error-correcting codes with superconducting qubits.
Quantum error correction is an essential ingredient for universal quantum computing. Despite tremendous experimental efforts in the study of quantum error correction, to date, there has been no demonstration in the realisation of universal quantum error-correcting code, with the subsequent verification of all key features including the identification of an arbitrary physical error, the capability for transversal manipulation of the logical state and state decoding. To address this challenge, we experimentally realise the [5, 1, 3] code, the so-called smallest perfect code that permits corrections of generic single-qubit errors. In the experiment, having optimised the encoding circuit, we employ an array of superconducting qubits to realise the [5, 1, 3] code for several typical logical states including the magic state, an indispensable resource for realising non-Clifford gates. The encoded states are prepared with an average fidelity of [Formula: see text] while with a high fidelity of [Formula: see text] in the code space. Then, the arbitrary single-qubit errors introduced manually are identified by measuring the stabilisers. We further implement logical Pauli operations with a fidelity of [Formula: see text] within the code space. Finally, we realise the decoding circuit and recover the input state with an overall fidelity of [Formula: see text], in total with 92 gates. Our work demonstrates each key aspect of the [5, 1, 3] code and verifies the viability of experimental realisation of quantum error-correcting codes with superconducting qubits.
Quantum error correction [1–4] is essential for bridging the gap between the error rates of physical devices and the extremely low error rates required for quantum algorithms. Recent error-correction demonstrations on superconducting processors [5–8] have focused primarily on the surface code [9], which offers a high error threshold but poses limitations for logical operations. The color code [10] enables more efficient logic, but it requires more complex stabilizer measurements and decoding. Measuring these stabilizers in planar architectures like superconducting qubits is challenging, and realizations of color codes [11–19] have not addressed performance scaling with code size on any platform. Here, we present a comprehensive demonstration of the color code on a superconducting processor [8]. Scaling the code distance from three to five suppresses logical errors by a factor of Λ 3/5 = 1.56(4). Simulations indicate this performance is below the threshold of the color code, and the color code may become more efficient than the surface code following modest device improvements. We test transversal Clifford gates with logical randomized benchmarking [20] and inject magic states [21], a key resource for universal computation, achieving fidelities exceeding 99 % with post-selection. Finally, we teleport logical states between color codes using lattice surgery [22]. This work establishes the color code as a compelling research direction to realize fault-tolerant quantum computation on superconducting processors in the near future.
Large-scale universal quantum computing requires the implementation of quantum error correction (QEC). While the implementation of QEC has already been demonstrated for quantum memories, reliable quantum computing requires also the application of nontrivial logical gate operations to the encoded qubits. Here, we present examples of such operations by implementing, in addition to the identity operation, the NOT and the Hadamard gate to a logical qubit encoded in a five qubit system that allows correction of arbitrary single-qubit errors. We perform quantum process tomography of the encoded gate operations, demonstrate the successful correction of all possible single-qubit errors, and measure the fidelity of the encoded logical gate operations.
Abstract To run large-scale algorithms on a quantum computer, error-correcting codes must be able to perform a fundamental set of operations, called logic gates, while isolating the encoded information from noise 1–8 . We can complete a universal set of logic gates by producing special resources called magic states 9–11 . It is therefore important to produce high-fidelity magic states to conduct algorithms while introducing a minimal amount of noise to the computation. Here we propose and implement a scheme to prepare a magic state on a superconducting qubit array using error correction. We find that our scheme produces better magic states than those that can be prepared using the individual qubits of the device. This demonstrates a fundamental principle of fault-tolerant quantum computing 12 , namely, that we can use error correction to improve the quality of logic gates with noisy qubits. Moreover, we show that the yield of magic states can be increased using adaptive circuits, in which the circuit elements are changed depending on the outcome of mid-circuit measurements. This demonstrates an essential capability needed for many error-correction subroutines. We believe that our prototype will be invaluable in the future as it can reduce the number of physical qubits needed to produce high-fidelity magic states in large-scale quantum-computing architectures.
Correcting errors in real time is essential for reliable large-scale quantum computations. Realizing this high-level function requires a system capable of several low-level primitives, including single-qubit and two-qubit operations, mid-circuit measurements of subsets of qubits, real-time processing of measurement outcomes, and the ability to condition subsequent gate operations on those measurements. In this work, we use a ten qubit QCCD trapped-ion quantum computer to encode a single logical qubit using the [[7,1,3]] color code, first proposed by Steane~\cite{steane1996error}. The logical qubit is initialized into the eigenstates of three mutually unbiased bases using an encoding circuit, and we measure an average logical SPAM error of 1.7(6)×10−3, compared to the average physical SPAM error 2.4(8)×10−3 of our qubits. We then perform multiple syndrome measurements on the encoded qubit, using a real-time decoder to determine any necessary corrections that are done either as software updates to the Pauli frame or as physically applied gates. Moreover, these procedures are done repeatedly while maintaining coherence, demonstrating a dynamically protected logical qubit memory. Additionally, we demonstrate non-Clifford qubit operations by encoding a logical magic state with an error rate below the threshold required for magic state distillation. Finally, we present system-level simulations that allow us to identify key hardware upgrades that may enable the system to reach the pseudo-threshold.
Quantum computing holds the promise of solving problems that are intractable for classical computers, with applications ranging from optimization and materials simulation to cryptography. It achieves this by leveraging the exponentially scaling dimensionality of the space encoding quantum information and by executing algorithms on quantum registers in superposition states – a feature often referred to as quantum parallelism. However, while encoding information in computational units capable of exploring a continuous set of quantum states enables exponential scaling of computational power with system size, quantum systems are also more susceptible to errors than their classical counterparts. These errors take the form of both control errors, where miscalibration of the control pulses causes coherent errors on the qubit states, as well as incoherent errors due to energy relaxation and dephasing. Scaling quantum systems to run useful algorithms involving hundreds or thousands of logical qubits will require quantum error correction. In this approach, quantum information is redundantly encoded across an entangled state of many physical qubits. This has enabled experimental demonstrations across various platforms – including ion traps, superconducting circuits, and neutral atoms – showing that encoded quantum states can be preserved beyond the coherence times of the constituting physical qubits. However, quantum state preservation is only one component needed for scalable quantum computing. To execute algorithms, it is also necessary to implement quantum gates on and between encoded qubits, in a way that maintains fault tolerance by preserving the ability to correct errors as they occur during the computation. In the first part of this thesis, we demonstrate the implementation of an error-corrected quantum operation that entangles two logical qubits. This is achieved by performing lattice surgery on a distance-three surface code qubit, resulting in a logical Bell state encoded in distance-three repetition codes, which enable the correction of single bit-flip errors. We further introduce techniques to benchmark and characterize the performance of logical operations, including applying the protocol to arbitrary logical input states and performing logical quantum process tomography. Together, these results constitute one of the first realizations of error-corrected lattice surgery in superconducting circuits. While quantum error correction can correct errors provided they occur with sufficiently low frequency, it may fail when many qubits experience errors simultaneously. In the second part of this thesis, we therefore shift focus to a specific error mechanism known to cause correlated errors in superconducting circuits – quasiparticle-induced decoherence. In this case, various forms of energy deposition on the quantum device can break Cooper pairs into quasiparticles, which may subsequently diffuse to the tunnel junction and interact with the qubit state, thereby causing decoherence. In this thesis, we investigate the impact of quasiparticle tunneling on qubit performance, with a focus on infrared-induced quasiparticles. We compare the sensitivity of niobium-based qubits to those made from tantalum – a material that has gained interest in recent years following demonstrations of qubits with improved coherence times based on this material. Using a thermal radiator source, we show that the performance of tantalum qubits may be limited by infrared-induced quasiparticles in typical superconducting circuit experimental setups. By employing both ambient and in-line infrared filters, we investigate the effectiveness of different filtering strategies and develop best practices for engineering cryogenic environments for superconducting quantum processors. The results presented in this thesis contribute to the advancement of quantum computing based on superconducting circuits by implementing and characterizing quantum error-corrected operations, and by investigating quasiparticles as a source of decoherence, along with strategies to improve infrared filtering and signal conditioning in cryogenic environments for future fault-tolerant quantum computing.
In quantum error-correcting code (QECC), many quantum operations and measurements are necessary to correct errors in logical qubits. In the stabilizer formalism, which is widely used in QECC, generators Gi(i=1,2,...) consist of multiples of Pauli matrices and perform encoding, decoding, and measurement. In order to maintain encoding states, the stabilizer Hamiltonian ${H}_{\mathrm{stab}}=\ensuremath{-}{\ensuremath{\sum}}_{i}{G}_{i}$ is suitable because its ground state corresponds to the code space. On the other hand, Hamiltonians of most solid-state qubits have two-body interactions and show their own dynamics. In addition solid-state qubits are fixed on substrate and qubit-qubit operation is restricted in their neighborhood. The main purpose of this paper is to show how to directly generate the stabilizer Hamiltonian Hstab from conventional two-body Hamiltonians with Ising interaction and XY interaction by applying a pulse control method such as an NMR technique. We show that generation times of Hstab for nine-qubit code, five-qubit code, and Steane code are estimated to be less than 300 ns when typical experimental data of superconducting qubits are used, and sufficient pulse control is assumed. We also show how to prepare encoded states from an initial state $|0,...,0\ensuremath{\rangle}$. In addition, we discuss an appropriate arrangement of two- or three-dimensional arrayed qubits.