We show that finite system-reservoir coupling imposes a distinct quantum limit on the performance of a nonequilibrium quantum heat engine. Even in the absence of quantum friction along the isentropic strokes, finite system-reservoir coupling induces correlations that result in the generation of coherence between the energy eigenstates of the working system. This coherence acts to hamper the engine's power output, as well as the efficiency with which it can convert heat into useful work, and cannot be captured by a standard Born-Markov analysis of the system-reservoir interactions.
We show that finite system-reservoir coupling imposes a distinct quantum limit on the performance of a nonequilibrium quantum heat engine. Even in the absence of quantum friction along the isentropic strokes, finite system-reservoir coupling induces correlations that result in the generation of coherence between the energy eigenstates of the working system. This coherence acts to hamper the engine's power output, as well as the efficiency with which it can convert heat into useful work, and cannot be captured by a standard Born-Markov analysis of the system-reservoir interactions.
We study a quantum heat engine at strong coupling between the system and the thermal reservoirs. Exploiting a collective coordinate mapping, we incorporate system-reservoir correlations into a consistent thermodynamic analysis, thus circumventing the usual restriction to weak coupling and vanishing correlations. We apply our formalism to the example of a quantum Otto cycle, demonstrating that the performance of the engine is diminished in the strong coupling regime with respect to its weakly coupled counterpart, producing a reduced net work output and operating at a lower energy conversion efficiency. We identify costs imposed by sudden decoupling of the system and reservoirs around the cycle as being primarily responsible for the diminished performance, and we define an alternative operational procedure which can partially recover the work output and efficiency. More generally, the collective coordinate mapping holds considerable promise for wider studies of thermodynamic systems beyond weak reservoir coupling.
We investigate, in an analytical fashion, quantum Carnot cycles of a microscopic heat engine coupled to two nite heat reservoirs, whose internal cycles could own higher e ciency than the standard Carnot limit without consuming extra quantum resources, e.g., coherence or squeezing properties. The engine runs time-dependently, involving both the internal and external cycles to collaboratively accomplish a complete Carnot cycle, and the e ciency of the engine depends on the reservoirs heat capacities and the working substance. Our analytical results of the maximum efficiency and the maximum power output clarify the mechanism behind the high performance of the microscopic engines, displaying the key roles played by the nite-sized heat reservoirs. Our proposal is generally valid for any microscopic thermodynamic system and fully feasible under current laboratory conditions.
Squeezed thermal reservoirs have been proposed as a route to boosting the efficiency and power of quantum heat engines beyond the standard Carnot bound, since squeezing injects an effective negative entropy that can, in principle, be converted into extra work. What remains poorly quantified is the entropy-production cost that driving a working qubit against a squeezed bath actually incurs once finite-time operation and reservoir decoherence are taken into account. We simulate a quantum Otto-cycle heat engine built from a two-level working system coupled alternately to a hot reservoir at temperature 4.2 K, squeezed with squeezing parameter r ranging from 0 to 1.2, and an unsqueezed cold reservoir at 0.8 K, integrating the Lindblad master equation across 42 combinations of squeezing parameter and cycle duration between 0.05 and 2.0 (in units of the inverse qubit gap). At r = 0, mean entropy production per cycle was 0.223 k_B, consistent with standard finite-time Otto-cycle behaviour, but rose to 0.361 k_B at r = 1.2, a 62% increase, even as extractable work per cycle increased by 41%, from 0.184 to 0.259 (in units of the qubit gap). The ratio of work output to entropy production, an effective thermodynamic figure of merit, was therefore not monotonic in squeezing: it peaked at r = 0.6, where work per unit entropy produced reached 0.98, 15% above the unsqueezed value of 0.85, before declining at higher squeezing as entropy production began to outpace the marginal work gain. Power output at the maximum-power cycle duration increased with squeezing across the full range tested, from 0.31 (gap units) at r = 0 to 0.52 at r = 1.2, a 68% gain, but efficiency at maximum power fell from 0.41 to 0.33 over the same range, a trade-off traced out in detail in Table 1. A decomposition of total entropy production attributed 58-71% to hot-bath coupling across all squeezing values, with the squeezed-bath contribution alone rising from undefined at r = 0 to 34% of hot-bath entropy production at r = 1.2, while coherence generated during the unitary strokes accounted for a comparatively stable 12-18% regardless of squeezing strength. These results indicate that reservoir squeezing in quantum heat engines delivers a genuine power and work advantage but at a non-negligible and squeezing-dependent entropy cost, with an intermediate squeezing level offering the best entropy-normalized performance rather than the strongest squeezing tested, a finding directly relevant to the design of squeezed-bath quantum thermal devices operating under realistic decoherence.
The working substance fueling a quantum heat engine may contain coherence in its energy basis, depending on the dynamics of the engine cycle. In some models of quantum Otto heat engines, energy coherence has been associated with entropy production and quantum friction. We considered a quantum Otto heat engine operating at finite time. Coherence is generated and the working substance does not reach thermal equilibrium after interacting with the hot heat reservoir, leaving the working substance in a state with residual energy coherence. We observe an interferencelike effect between the residual coherence (after the incomplete thermalization) and the coherence generated in the subsequent finite-time stroke. We introduce analytical expressions highlighting the role of coherence and examine how this dynamical interference effect influences the engine performance. Additionally, in this scenario in which coherence is present along the cycle, we argue that the careful tuning of the cycle parameters may exploit this interference effect and make coherence acts like a dynamical quantum lubricant. To illustrate this, we numerically consider an experimentally feasible example and compare the engine performance to the performance of a similar engine where the residual coherence is completely erased, ruling out the dynamical interference effect.
The working substance fueling a quantum heat engine may contain prominent quantum properties such as coherence and nonclassical correlations. In particular, coherence has been somewhat related to quantum friction, whose origin has been mostly associated with the noncommutativity of a driven Hamiltonian at different times. Here, we consider a quantum Otto heat engine operated at finite time and undergoing incomplete thermalization with a heat source. We introduce analytical expressions relating the engine efficiency and extractable power to the coherence measured in the energy basis of the working substance during the engine cycle. We show that coherence, which has been related to an increase in entropy production and irreversibility, can in also be employed to improve the quantum engine performance, mitigating quantum friction. Such an improvement may be achieved by carefully tuning cycle parameters. To illustrate this coherent improvement we performed a numerical analysis in an experimentally feasible example.
The concept of thermal machines has evolved from the canonical steam engine to the recently proposed nanoscopic quantum systems as working fluids. The latter obey quantum open system dynamics and frequently operate in nonequilibrium conditions. However, the role of this dynamics in the overall performance of quantum heat engines remains an open problem. Here we analyze and optimize the efficiency and power output of two-stage quantum heat engines fueled by nonequilibrium steady states. In a charging first stage, the quantum working fluid consisting of a qutrit or two coupled qubits is connected to two reservoirs at different temperatures, which establish a heat current that stores ergotropy in the system; the second stage comprises a coherent driving force that extracts work from the machine in finite a amount of time; finally, the external drive is switched off and the machine enters a new cycle.