Challenges
Datasets
Workspaces
Papers
Discussions
Leaderboard
Log inSign up
Challenges
Datasets
Workspaces
Papers
Discussions
Leaderboard
Blog
Job Board
Q3AS

© 2026 Aqora Quantum S.A.S.

TermsPrivacyLegal Notice

arXiv:1906.02658 · Physical Review Letters

Quantum Rifling: Protecting a Qubit from Measurement Back Action

Daniel B. Szombati, Alejandro Gomez Frieiro, Clemens Müller, Tyler Jones, Markus Jerger, Arkady Fedorov

Published Feb 20, 2020• 19 citations
arXivHTMLPDF

Abstract

Quantum mechanics postulates that measuring the qubit's wave function results in its collapse, with the recorded discrete outcome designating the particular eigenstate that the qubit collapsed into. We show that this picture breaks down when the qubit is strongly driven during measurement. More specifically, for a fast evolving qubit the measurement returns the time-averaged expectation value of the measurement operator, erasing information about the initial state of the qubit while completely suppressing the measurement backaction. We call this regime quantum rifling, as the fast spinning of the Bloch vector protects it from deflection into either of its eigenstates. We study this phenomenon with two superconducting qubits coupled to the same probe field and demonstrate that quantum rifling allows us to measure either one of the qubits on demand while protecting the state of the other from measurement backaction. Our results allow for the implementation of selective readout multiplexing of several qubits, contributing to the efficient scaling up of quantum processors for future quantum technologies.

DOI
10.1103/physrevlett.124.070401

Related papers

Measurement-induced population switching

Michael S. Ferguson, Leon C. Camenzind, Clemens Müller +5 more

Quantum information processing is a key technology in the ongoing second quantum revolution, with a wide variety of hardware platforms competing toward its realization. An indispensable component of such hardware is a measurement device, i.e., a quantum detector that is used to determine the outcome of a computation. The act of measurement in quantum mechanics, however, is naturally invasive as the measurement apparatus becomes entangled with the system that it observes. This always leads to a disturbance in the observed system, a phenomenon called quantum measurement backaction, which should solely lead to the collapse of the quantum wave function and the physical realization of the measurement postulate of quantum mechanics. Here we demonstrate that backaction can fundamentally change the quantum system through the detection process. For quantum information processing, this means that the readout alters the system in such a way that a faulty measurement outcome is obtained. Specifically, we report a backaction-induced population switching, where the bare presence of weak, nonprojective measurements by an adjacent charge sensor inverts the electronic charge configuration of a semiconductor double quantum dot system. The transition region grows with measurement strength and is suppressed by temperature, in excellent agreement with our coherent quantum backaction model. Our result exposes backaction channels that appear at the interplay between the detector and the system environments, and opens new avenues for controlling and mitigating backaction effects in future quantum technologies.

arXiv:2010.04635•Physical Review Research•Apr 14, 2023•16 citations

Quantum Jumps and Measurement Backaction in a Superconducting Qubit

D. H. Slichter

Real-time monitoring of a quantum state provides powerful tools for studying the backaction of quantum measurement and performing quantum feedback. Historically, this monitoring capability has been the exclusive province of atomic and optical physics. This thesis describes the implementation of the first such high-fidelity readout scheme in a solid state circuit, a superconducting quantum bit (qubit) coupled to a microwave cavity in the circuit quantum electrodynamics (circuit QED) architecture. The qubit-state-dependent resonance frequency of the cavity is probed with a microwave drive tone, and the resulting signal amplified using a fast, ultralow-noise superconducting parametric amplifier. This arrangement enables the observation of quantum jumps between the qubit states in real time. The ability to monitor the qubit continuously with high fidelity and resolve quantum jumps can be used to investigate the backaction of the measurement process on the qubit. This thesis examines the quantum Zeno effect--where strong measurement inhibits the evolution of a quantum system-- as well as the transition to non-ideal measurement with increasing measurement strength in the circuit QED architecture, a phenomenon shown to be due to the upconversion of low-frequency dephasing noise. These data allow probes of ``universal'' flux noise in previously inaccessible frequency ranges. The work presented here opens the door for quantum feedback and error correction in solid-state quantum systems using continuous weak measurement.

•Jan 1, 2011•14 citations

Superconducting qubits - measurement, entanglement, and noise

Lars Tornberg

In the early 1980’s, it was suggested that a computer obeying the laws of quantum mechanics would be able to solve problems beyond the capabilities of a classical computer. The novel ways in which such a quantum computer works relies on the quantum properties of the quantum bits (qubits) used to store the information. Any candidate for a quantum computer must thus be able to sustain these properties and offer means to manipulate and read-out the information. One such candidate are quantum mechanical, superconducting circuits, where the logical bit is encoded in the energy eigenstates of the system. In circuit quantum electrodynamics, such a qubit is coupled to a microwave cavity allowing the qubit to be coherently controlled and read-out by probing the cavity. In this thesis, we theoretically investigate the destructive effects of noise which couple to the system as one tries to measure and control the qubits. We study the so called quantum capacitance read-out scheme, where the state of the qubit is mapped onto an equivalent capacitance of the circuit. It is shown that this is quantum limited, in the sense that the state of the qubit can be determined while simultaneously adding a minimum amount of noise to the system. Apart from the added noise, a measurement on a qubit will perturb it, causing the state to collapse to one of the measurement eigenstates. Such a state collapse can be utilized to generate entanglement between qubits by measuring on the cavity. We show that high-fidelity entangled states can be produced in this way and discuss the potential of the measurement to violate a bound given by local hidden variable theories. The possibility to prolong the life-time of the quantum state by active error correction is also investigated and we discuss limits on gate operation times to benefit from such a code, given realistic values for the error probabilities. This work was supported by the European Commission through IST-015708 EuroSQIP integrated pro ject, and by the Swedish Research Council.

•Jan 1, 2009•4 citations

Is Wave Function Collapse Necessary? Explaining Quantum Nondemolition Measurement of a Spin Qubit within Linear Evolution

Harry E. Dyte, George Gillard, Santanu Manna +3 more

The measurement problem dates back to the dawn of quantum mechanics. Here, we measure a quantum dot electron spin qubit through off-resonant coupling with a highly redundant ancilla, consisting of thousands of nuclear spins. Large redundancy allows for single-shot measurement with high fidelity ≈99.85%. Repeated measurements enable heralded initialization of the qubit and backaction-free detection of electron spin quantum jumps, attributed to burstlike fluctuations in a thermally populated phonon bath. Based on these results we argue that the measurement, linking quantum states to classical observables, can be made without any "wave function collapse" in agreement with the Quantum Darwinism concept.

arXiv:2307.00308•Physical Review Letters•Apr 19, 2024•7 citations

Undoing a quantum measurement

Christoph Bruder, Daniel Loss

Quantum measurements are conventionally thought of as irretrievably “collapsing” a wave function to the observed state. However, experiments with superconducting qubits show that the partial collapse resulting from a weak continuous measurement can be restored.

Physics•Nov 10, 2008•5 citations

Probing the quantum motion of a macroscopic mechanical oscillator with a radio-frequency superconducting qubit

Kyrylo Gerashchenko, Rousseau, Rémi, Léo Balembois +11 more

Long-lived mechanical resonators like drums oscillating at MHz frequencies and operating in the quantum regime are a powerful platform for quantum technologies and tests of fundamental physics. Yet, quantum control of such systems remains challenging, owing to their low energy scale and the difficulty of achieving efficient coupling to other well-controlled quantum devices. Here, we demonstrate repeated coherent interactions between a 4 MHz suspended silicon nitride membrane and a resonant superconducting heavy-fluxonium qubit. The qubit is initialized at an effective temperature of $21~\mathrm{μK}$ and read out with 77% single-shot fidelity. During the $6~\mathrm{ms}$ lifetime of the membrane the two systems swap excitations more than 300 times. After each interaction, a state-selective qubit detection is performed, implementing a stroboscopic series of weak measurements that provide information about the mechanical state. The accumulated records reconstruct the position noise spectrum of the membrane, revealing both its thermal occupation $n_\mathrm{th}\approx47$ at $10~\mathrm{mK}$ and the qubit-induced back-action. By preparing the qubit either in its ground or excited state before each interaction, we observe an imbalance between the emission and absorption spectra, proportional to $n_\mathrm{th}$ and $n_\mathrm{th}+1$, respectively-a hallmark of the non-commutation of phonon creation and annihilation operators. Since the predicted Diósi-Penrose gravitational collapse time is comparable to the measured mechanical decoherence time, our architecture enters a regime where gravity-induced decoherence could be tested directly.

arXiv:2505.21481•May 27, 2025•6 citations
Quantum mechanics postulates that measuring the qubit's wave function results in its collapse, with the recorded discrete outcome designating the particular eigenstate that the qubit collapsed into. We show that this picture breaks down when the qubit is strongly driven during measurement. More specifically, for a fast evolving qubit the measurement returns the time-averaged expectation value of the measurement operator, erasing information about the initial state of the qubit while completely suppressing the measurement backaction. We call this regime quantum rifling, as the fast spinning of the Bloch vector protects it from deflection into either of its eigenstates. We study this phenomenon with two superconducting qubits coupled to the same probe field and demonstrate that quantum rifling allows us to measure either one of the qubits on demand while protecting the state of the other from measurement backaction. Our results allow for the implementation of selective readout multiplexing of several qubits, contributing to the efficient scaling up of quantum processors for future quantum technologies.
Quantum information processing is a key technology in the ongoing second quantum revolution, with a wide variety of hardware platforms competing toward its realization. An indispensable component of such hardware is a measurement device, i.e., a quantum detector that is used to determine the outcome of a computation. The act of measurement in quantum mechanics, however, is naturally invasive as the measurement apparatus becomes entangled with the system that it observes. This always leads to a disturbance in the observed system, a phenomenon called quantum measurement backaction, which should solely lead to the collapse of the quantum wave function and the physical realization of the measurement postulate of quantum mechanics. Here we demonstrate that backaction can fundamentally change the quantum system through the detection process. For quantum information processing, this means that the readout alters the system in such a way that a faulty measurement outcome is obtained. Specifically, we report a backaction-induced population switching, where the bare presence of weak, nonprojective measurements by an adjacent charge sensor inverts the electronic charge configuration of a semiconductor double quantum dot system. The transition region grows with measurement strength and is suppressed by temperature, in excellent agreement with our coherent quantum backaction model. Our result exposes backaction channels that appear at the interplay between the detector and the system environments, and opens new avenues for controlling and mitigating backaction effects in future quantum technologies.
Real-time monitoring of a quantum state provides powerful tools for studying the backaction of quantum measurement and performing quantum feedback. Historically, this monitoring capability has been the exclusive province of atomic and optical physics. This thesis describes the implementation of the first such high-fidelity readout scheme in a solid state circuit, a superconducting quantum bit (qubit) coupled to a microwave cavity in the circuit quantum electrodynamics (circuit QED) architecture. The qubit-state-dependent resonance frequency of the cavity is probed with a microwave drive tone, and the resulting signal amplified using a fast, ultralow-noise superconducting parametric amplifier. This arrangement enables the observation of quantum jumps between the qubit states in real time. The ability to monitor the qubit continuously with high fidelity and resolve quantum jumps can be used to investigate the backaction of the measurement process on the qubit. This thesis examines the quantum Zeno effect--where strong measurement inhibits the evolution of a quantum system-- as well as the transition to non-ideal measurement with increasing measurement strength in the circuit QED architecture, a phenomenon shown to be due to the upconversion of low-frequency dephasing noise. These data allow probes of ``universal'' flux noise in previously inaccessible frequency ranges. The work presented here opens the door for quantum feedback and error correction in solid-state quantum systems using continuous weak measurement.
In the early 1980’s, it was suggested that a computer obeying the laws of quantum mechanics would be able to solve problems beyond the capabilities of a classical computer. The novel ways in which such a quantum computer works relies on the quantum properties of the quantum bits (qubits) used to store the information. Any candidate for a quantum computer must thus be able to sustain these properties and offer means to manipulate and read-out the information. One such candidate are quantum mechanical, superconducting circuits, where the logical bit is encoded in the energy eigenstates of the system. In circuit quantum electrodynamics, such a qubit is coupled to a microwave cavity allowing the qubit to be coherently controlled and read-out by probing the cavity. In this thesis, we theoretically investigate the destructive effects of noise which couple to the system as one tries to measure and control the qubits. We study the so called quantum capacitance read-out scheme, where the state of the qubit is mapped onto an equivalent capacitance of the circuit. It is shown that this is quantum limited, in the sense that the state of the qubit can be determined while simultaneously adding a minimum amount of noise to the system. Apart from the added noise, a measurement on a qubit will perturb it, causing the state to collapse to one of the measurement eigenstates. Such a state collapse can be utilized to generate entanglement between qubits by measuring on the cavity. We show that high-fidelity entangled states can be produced in this way and discuss the potential of the measurement to violate a bound given by local hidden variable theories. The possibility to prolong the life-time of the quantum state by active error correction is also investigated and we discuss limits on gate operation times to benefit from such a code, given realistic values for the error probabilities. This work was supported by the European Commission through IST-015708 EuroSQIP integrated pro ject, and by the Swedish Research Council.
The measurement problem dates back to the dawn of quantum mechanics. Here, we measure a quantum dot electron spin qubit through off-resonant coupling with a highly redundant ancilla, consisting of thousands of nuclear spins. Large redundancy allows for single-shot measurement with high fidelity ≈99.85%. Repeated measurements enable heralded initialization of the qubit and backaction-free detection of electron spin quantum jumps, attributed to burstlike fluctuations in a thermally populated phonon bath. Based on these results we argue that the measurement, linking quantum states to classical observables, can be made without any "wave function collapse" in agreement with the Quantum Darwinism concept.
Long-lived mechanical resonators like drums oscillating at MHz frequencies and operating in the quantum regime are a powerful platform for quantum technologies and tests of fundamental physics. Yet, quantum control of such systems remains challenging, owing to their low energy scale and the difficulty of achieving efficient coupling to other well-controlled quantum devices. Here, we demonstrate repeated coherent interactions between a 4 MHz suspended silicon nitride membrane and a resonant superconducting heavy-fluxonium qubit. The qubit is initialized at an effective temperature of 21 μK21~\mathrm{μK}21 μK and read out with 77% single-shot fidelity. During the 6 ms6~\mathrm{ms}6 ms lifetime of the membrane the two systems swap excitations more than 300 times. After each interaction, a state-selective qubit detection is performed, implementing a stroboscopic series of weak measurements that provide information about the mechanical state. The accumulated records reconstruct the position noise spectrum of the membrane, revealing both its thermal occupation nth≈47n_\mathrm{th}\approx47nth​≈47 at 10 mK10~\mathrm{mK}10 mK and the qubit-induced back-action. By preparing the qubit either in its ground or excited state before each interaction, we observe an imbalance between the emission and absorption spectra, proportional to nthn_\mathrm{th}nth​ and nth+1n_\mathrm{th}+1nth​+1, respectively-a hallmark of the non-commutation of phonon creation and annihilation operators. Since the predicted Diósi-Penrose gravitational collapse time is comparable to the measured mechanical decoherence time, our architecture enters a regime where gravity-induced decoherence could be tested directly.