Challenges
Datasets
Workspaces
Papers
Discussions
Leaderboard
Log inSign up
Challenges
Datasets
Workspaces
Papers
Discussions
Leaderboard
Blog
Job Board
Q3AS

© 2026 Aqora Quantum S.A.S.

TermsPrivacyLegal Notice

arXiv:1905.05670 · Physical Review Applied

Calibration of a Cross-Resonance Two-Qubit Gate Between Directly Coupled Transmons

A.D. Patterson, Joseph Rahamim, T. Tsunoda, P.A. Spring, S. Jebari, K. Ratter, Matthias Mergenthaler, Giovanna Tancredi, B. Vlastakis, Martina Esposito, Peter Leek

Published Dec 5, 2019• 85 citations
arXivHTMLPDF

Abstract

Implementing high-fidelity entangling operations between qubits is a key challenge in quantum computing. Multiple sources of error and a large parameter space make optimization of control schemes for high-fidelity operations a complex technical challenge. This study presents a complete recipe for calibrating a high-fidelity cross-resonance gate implemented between two dispersively coupled transmon qubits, showing that even large amounts of crosstalk can be effectively canceled. This approach should be useful as a general tool for those working on experiments with coupled quantum systems, in particular for computing.

DOI
10.1103/physrevapplied.12.064013

Related papers

Mitigation of quantum crosstalk in cross-resonance-based qubit architectures

Peng Zhao

The cross-resonance gate (cr gate) architecture that exploits fixed-frequency transmon qubits and fixed couplings is a leading candidate for quantum computing. Nonetheless, without the tunability of qubit parameters such as qubit frequencies and couplings, gate operations can be limited by the presence of quantum crosstalk arising from the always-on couplings. When increasing system sizes, this can become even more serious, considering frequency collisions caused by fabrication uncertainties. Here, we introduce a cr-gate-based transmon architecture with passive mitigation of both quantum crosstalk and frequency collisions. Assuming typical parameters, we show that $ZZ$ crosstalk can be suppressed while maintaining $XY$ couplings to support fast, high-fidelity cr gates. The architecture also allows one to go beyond the existing literature by extending the operating regions in which fast, high-fidelity cr gates are possible, thus alleviating the frequency-collision issue. To examine the practicality, we analyze the cr-gate performance in multiqubit lattices and provide an intuitive model for identifying and mitigating the dominant source of error. For the state-of-the-art precision in setting frequencies, we further investigate its impact on the gates. We find that $ZZ$ crosstalk and frequency collisions can be largely mitigated for neighboring qubits, while interactions beyond near-neighbor qubits can introduce new frequency collisions. As the strength is typically at the submegahertz level, adding weak off-resonant drives to selectively shift qubits can mitigate the collisions. This work could be useful for suppressing quantum crosstalk and improving gate fidelities in large-scale quantum processors based on fixed-frequency qubits and fixed couplings.

arXiv:2307.09995•Physical Review Applied•Nov 15, 2023•16 citations

High-fidelity iSWAP gate with Double Transmon Coupler

Tarush Tiwari, Sudhir K. Sahu, Guilhem Ribeill +6 more

Entangling operations are at the heart of all approaches to quantum information processing. Parametric gates, in particular, offer a versatile solution to strongly couple off-resonant superconducting qubits with suppressed parasitic crosstalk to spectator qubits due to frequency-selective activation. In this work, we demonstrate a parametric iSWAP gate between two transmon qubits using the recently developed double transmon coupler (DTC). The DTC supports robust internally-defined cancellation point (``off'' state) for static interactions, while simultaneously mediating a fast parametric coupling between data qubits that can be deployed for high-fidelity two-qubit operations. We use robust phase estimation to calibrate non-commuting error terms in the parametric iSWAP gate, and achieve a 99.827% gate fidelity in 40ns without any numerical optimization. The circuit architecture and calibration techniques developed here are extensible to other gate implementations and qubit modalities, paving the way towards resource-efficient quantum information processing.

quant-pharXiv:2604.27080•May 1, 2026•3 citations

Cross-Cross Resonance Gate

Kentaro Heya, Naoki Kanazawa

The implementation of high-fidelity swapping operations is of vital importance for executing quantum algorithms on a quantum processor with limited connectivity.We present an efficient pulse-control technique, the cross-cross resonance (CCR) gate, to implement iSWAP and SWAP gates with dispersively coupled fixed-frequency transmon qubits.The key to the operation of the CCR gate is the simultaneous driving of both of the coupled qubits at the frequency of another qubit, whereby a fast two-qubit interaction roughly equivalent to ZX + XZ entangling gates is realized without strongly driving the qubits.We develop a calibration technique for the CCR gate and evaluate the performance of the iSWAP and SWAP gates.The CCR gate shows remarkable improvements in the average gate error from the conventional decomposition based on the cross-resonance gate.

arXiv:2103.00024•PRX Quantum•Nov 16, 2021•25 citations

Fast Z Z -free entangling gates for superconducting qubits assisted by a driven resonator

Ziwen Huang, Tae-Yoon Kim, Tanay Roy +4 more

Engineering high-fidelity two-qubit gates is an indispensable step toward practical quantum computing. For superconducting quantum platforms, one important setback is the stray interaction between qubits, which causes significant coherent errors. For transmon qubits, protocols for mitigating such errors usually involve fine-tuning the hardware parameters or introducing usually noisy flux-tunable couplers. In this work, we propose a simple scheme to cancel these stray interactions. The coupler used for such cancelation is a driven high-coherence resonator, where the amplitude and frequency of the drive serve as control knobs. Through the resonator-induced-phase interaction, the static $ZZ$ coupling can be entirely neutralized. We numerically show that such a scheme can enable short and high-fidelity entangling gates, including cross-resonance controlled-not (cnot) gates within 40 ns and adiabatic controlled-$Z$ gates within 140 ns. Our architecture is not only $ZZ$-free, but also contains no extra noisy components, such that it preserves the coherence times of fixed-frequency transmon qubits. With the state-of-the-art coherence times, the error of our cross-resonance cnot gate can be reduced to below ${10}^{\ensuremath{-}4}$.

arXiv:2311.01332•Physical Review Applied•Sep 4, 2024•8 citations

Hardware-Efficient Microwave-Activated Tunable Coupling between Superconducting Qubits

Bradley K. Mitchell, Ravi Naik, Alexis Morvan +7 more

Generating high-fidelity, tunable entanglement between qubits is crucial for realizing gate-based quantum computation. In superconducting circuits, tunable interactions are often implemented using flux-tunable qubits or coupling elements, adding control complexity and noise sources. Here, we realize a tunable ZZ interaction between two transmon qubits with fixed frequencies and fixed coupling, induced by driving both transmons off resonantly. We show tunable coupling over 1 order of magnitude larger than the static coupling, and change the sign of the interaction, enabling cancellation of the idle coupling. Further, this interaction is amenable to large quantum processors: the drive frequency can be flexibly chosen to avoid spurious transitions, and because both transmons are driven, it is resilient to microwave cross talk. We apply this interaction to implement a controlled phase (CZ) gate with a gate fidelity of 99.43(1)% as measured by cycle benchmarking, and we find the fidelity is limited by incoherent errors.

arXiv:2105.05384•Physical Review Letters•Nov 9, 2021•85 citations

Quantum Crosstalk Analysis for Simultaneous Gate Operations on Superconducting Qubits

Peng Zhao, Kehuan Linghu, Zhiyuan Li +5 more

Maintaining or even improving gate performance with growing numbers of parallel controlled qubits is a vital requirement for fault-tolerant quantum computing.For superconducting quantum processors, though isolated one-or two-qubit gates have been demonstrated with high fidelity, implementing these gates in parallel commonly shows worse performance.Generally, this degradation is attributed to various crosstalks between qubits, such as quantum crosstalk due to residual inter-qubit coupling.An understanding of the exact nature of these crosstalks is critical to figuring out respective mitigation schemes and improved qubit architecture designs with low crosstalk.Here we give a theoretical analysis of quantum crosstalk impact on simultaneous gate operations in a qubit architecture, where fixed-frequency transmon qubits are coupled via a tunable bus, and sub-100-ns controlled-Z (CZ) gates can be realized by applying a baseband flux pulse on the bus.Our analysis shows that for microwave-driven single-qubit gates, the dressing from the qubit-qubit coupling can cause non-negligible cross-driving errors when qubits operate near frequency collision regions.During CZ gate operations, although unwanted nearest-neighbor interactions are nominally turned off, sub-MHz parasitic next-nearest-neighbor interactions involving spectator qubits can still exist, causing considerable leakage or control error when one operates qubit systems around these parasitic resonance points.To ensure high-fidelity simultaneous operations, a request could be raised to figure out a better way to balance the gate error from target qubit systems themselves and the error from nonparticipating spectator qubits.Overall, our analysis suggests that towards useful quantum processors, the qubit architecture should be examined carefully in the context of high-fidelity simultaneous gate operations in a scalable qubit lattice.

arXiv:2110.12570•PRX Quantum•Apr 1, 2022•133 citations
Implementing high-fidelity entangling operations between qubits is a key challenge in quantum computing. Multiple sources of error and a large parameter space make optimization of control schemes for high-fidelity operations a complex technical challenge. This study presents a complete recipe for calibrating a high-fidelity cross-resonance gate implemented between two dispersively coupled transmon qubits, showing that even large amounts of crosstalk can be effectively canceled. This approach should be useful as a general tool for those working on experiments with coupled quantum systems, in particular for computing.
The cross-resonance gate (cr gate) architecture that exploits fixed-frequency transmon qubits and fixed couplings is a leading candidate for quantum computing. Nonetheless, without the tunability of qubit parameters such as qubit frequencies and couplings, gate operations can be limited by the presence of quantum crosstalk arising from the always-on couplings. When increasing system sizes, this can become even more serious, considering frequency collisions caused by fabrication uncertainties. Here, we introduce a cr-gate-based transmon architecture with passive mitigation of both quantum crosstalk and frequency collisions. Assuming typical parameters, we show that ZZZZZZ crosstalk can be suppressed while maintaining XYXYXY couplings to support fast, high-fidelity cr gates. The architecture also allows one to go beyond the existing literature by extending the operating regions in which fast, high-fidelity cr gates are possible, thus alleviating the frequency-collision issue. To examine the practicality, we analyze the cr-gate performance in multiqubit lattices and provide an intuitive model for identifying and mitigating the dominant source of error. For the state-of-the-art precision in setting frequencies, we further investigate its impact on the gates. We find that ZZZZZZ crosstalk and frequency collisions can be largely mitigated for neighboring qubits, while interactions beyond near-neighbor qubits can introduce new frequency collisions. As the strength is typically at the submegahertz level, adding weak off-resonant drives to selectively shift qubits can mitigate the collisions. This work could be useful for suppressing quantum crosstalk and improving gate fidelities in large-scale quantum processors based on fixed-frequency qubits and fixed couplings.
Entangling operations are at the heart of all approaches to quantum information processing. Parametric gates, in particular, offer a versatile solution to strongly couple off-resonant superconducting qubits with suppressed parasitic crosstalk to spectator qubits due to frequency-selective activation. In this work, we demonstrate a parametric iSWAP gate between two transmon qubits using the recently developed double transmon coupler (DTC). The DTC supports robust internally-defined cancellation point (``off'' state) for static interactions, while simultaneously mediating a fast parametric coupling between data qubits that can be deployed for high-fidelity two-qubit operations. We use robust phase estimation to calibrate non-commuting error terms in the parametric iSWAP gate, and achieve a 99.827% gate fidelity in 40ns without any numerical optimization. The circuit architecture and calibration techniques developed here are extensible to other gate implementations and qubit modalities, paving the way towards resource-efficient quantum information processing.
The implementation of high-fidelity swapping operations is of vital importance for executing quantum algorithms on a quantum processor with limited connectivity.We present an efficient pulse-control technique, the cross-cross resonance (CCR) gate, to implement iSWAP and SWAP gates with dispersively coupled fixed-frequency transmon qubits.The key to the operation of the CCR gate is the simultaneous driving of both of the coupled qubits at the frequency of another qubit, whereby a fast two-qubit interaction roughly equivalent to ZX + XZ entangling gates is realized without strongly driving the qubits.We develop a calibration technique for the CCR gate and evaluate the performance of the iSWAP and SWAP gates.The CCR gate shows remarkable improvements in the average gate error from the conventional decomposition based on the cross-resonance gate.
Engineering high-fidelity two-qubit gates is an indispensable step toward practical quantum computing. For superconducting quantum platforms, one important setback is the stray interaction between qubits, which causes significant coherent errors. For transmon qubits, protocols for mitigating such errors usually involve fine-tuning the hardware parameters or introducing usually noisy flux-tunable couplers. In this work, we propose a simple scheme to cancel these stray interactions. The coupler used for such cancelation is a driven high-coherence resonator, where the amplitude and frequency of the drive serve as control knobs. Through the resonator-induced-phase interaction, the static ZZZZZZ coupling can be entirely neutralized. We numerically show that such a scheme can enable short and high-fidelity entangling gates, including cross-resonance controlled-not (cnot) gates within 40 ns and adiabatic controlled-ZZZ gates within 140 ns. Our architecture is not only ZZZZZZ-free, but also contains no extra noisy components, such that it preserves the coherence times of fixed-frequency transmon qubits. With the state-of-the-art coherence times, the error of our cross-resonance cnot gate can be reduced to below ${10}^{\ensuremath{-}4}$.
Generating high-fidelity, tunable entanglement between qubits is crucial for realizing gate-based quantum computation. In superconducting circuits, tunable interactions are often implemented using flux-tunable qubits or coupling elements, adding control complexity and noise sources. Here, we realize a tunable ZZ interaction between two transmon qubits with fixed frequencies and fixed coupling, induced by driving both transmons off resonantly. We show tunable coupling over 1 order of magnitude larger than the static coupling, and change the sign of the interaction, enabling cancellation of the idle coupling. Further, this interaction is amenable to large quantum processors: the drive frequency can be flexibly chosen to avoid spurious transitions, and because both transmons are driven, it is resilient to microwave cross talk. We apply this interaction to implement a controlled phase (CZ) gate with a gate fidelity of 99.43(1)% as measured by cycle benchmarking, and we find the fidelity is limited by incoherent errors.
Maintaining or even improving gate performance with growing numbers of parallel controlled qubits is a vital requirement for fault-tolerant quantum computing.For superconducting quantum processors, though isolated one-or two-qubit gates have been demonstrated with high fidelity, implementing these gates in parallel commonly shows worse performance.Generally, this degradation is attributed to various crosstalks between qubits, such as quantum crosstalk due to residual inter-qubit coupling.An understanding of the exact nature of these crosstalks is critical to figuring out respective mitigation schemes and improved qubit architecture designs with low crosstalk.Here we give a theoretical analysis of quantum crosstalk impact on simultaneous gate operations in a qubit architecture, where fixed-frequency transmon qubits are coupled via a tunable bus, and sub-100-ns controlled-Z (CZ) gates can be realized by applying a baseband flux pulse on the bus.Our analysis shows that for microwave-driven single-qubit gates, the dressing from the qubit-qubit coupling can cause non-negligible cross-driving errors when qubits operate near frequency collision regions.During CZ gate operations, although unwanted nearest-neighbor interactions are nominally turned off, sub-MHz parasitic next-nearest-neighbor interactions involving spectator qubits can still exist, causing considerable leakage or control error when one operates qubit systems around these parasitic resonance points.To ensure high-fidelity simultaneous operations, a request could be raised to figure out a better way to balance the gate error from target qubit systems themselves and the error from nonparticipating spectator qubits.Overall, our analysis suggests that towards useful quantum processors, the qubit architecture should be examined carefully in the context of high-fidelity simultaneous gate operations in a scalable qubit lattice.