Challenges
Datasets
Workspaces
Papers
Discussions
Leaderboard
Log inSign up
Challenges
Datasets
Workspaces
Papers
Discussions
Leaderboard
Blog
Job Board
Q3AS

© 2026 Aqora Quantum S.A.S.

TermsPrivacyLegal Notice

arXiv:1904.09934 · Physical review. E

Making the most of data: Quantum Monte Carlo postanalysis revisited

Tom Ichibha, Verena A. Neufeld, Kenta Hongo, Ryo Maezono, Alex J. W. Thom

Published Apr 19, 2022• 1 citation
arXivHTMLPDF

Abstract

In quantum Monte Carlo (QMC) methods, energy estimators are calculated as (functions of) statistical averages of quantities sampled during a calculation. Associated statistical errors of these averages are often estimated. This error estimation is not straightforward and there are several choices of the error estimation methods. We evaluate the performance of three methods (the Straatsma method, an autoregressive model, and a blocking analysis based on von Neumann's ratio test for randomness) for the energy time series given by three QMC methods [diffusion Monte Carlo, full configuration interaction Quantum Monte Carlo (FCIQMC), and coupled cluster Monte Carlo (CCMC)]. From these analyses, we describe a hybrid analysis method which provides reliable error estimates for a series of various lengths of FCIQMC and CCMC's time series. Equally important is the estimation of the appropriate start point of the equilibrated phase. We establish that a simple mean squared error rule method as described by White [K. P. White, Jr., Simulation 69(6), 323 (1997)10.1177/003754979706900601] can provide reasonable estimations.

DOI
10.1103/physreve.105.045313

Related papers

APPLYING QUANTUM MONTE CARLO TO THE ELECTRONIC STRUCTURE PROBLEM

Andrew Powell, Richard Dawes

Two distinct types of Quantum Monte Carlo (QMC) calculations are applied to electronic structure problems such as calculating potential energy curves and producing benchmark values for reaction barriers. First, Variational and Diffusion Monte Carlo (VMC and DMC) methods using a trial wavefunction subject to the fixed node approximation were tested using the CASINO code.[1] Next, Full Configuration Interaction Quantum Monte Carlo (FCIQMC), along with its initiator extension (i-FCIQMC) were tested using the NECI code.[2] FCIQMC seeks the FCI energy for a specific basis set. At a reduced cost, the efficient i-FCIQMC method can be applied to systems in which the standard FCIQMC approach proves to be too costly. Since all of these methods are statistical approaches, uncertainties (error-bars) are introduced for each calculated energy. This study tests the performance of the methods relative to traditional quantum chemistry for some benchmark systems. References: [1] R. J. Needs et al., J. Phys.: Condensed Matter 22, 023201 (2010). [2] G. H. Booth et al., J. Chem. Phys. 131, 054106 (2009).

International Symposium on Molecular Spectroscopy (ISMS)•Jun 21, 2016•0 citations

Investigating quantum Monte Carlo methods in Slater determinant bases

W. A. Vigor

In this thesis we investigate the recently developed Full Configuration Interaction Quantum Monte Carlo (FCIQMC) method. This method, unlike the traditional methods in Quantum Monte Carlo (QMC), doesn’t require the use of the uncontrolled fixed node approximation and so potentially it can yield far more accurate results. This means that it can be thought of as a hybrid between the methods used by quantum chemists and QMC, and thus has spawned a new field of stochastic quantum chemistry. The work described in this thesis can be split into three distinct but interrelated parts. We begin with an investigation of the underlying FCIQMC stochastic process. We show that FCIQMC is an example of Markov Chain Monte Carlo. This means we can compute a stochastic matrix from which all details about the Monte-Carlo simulation can be obtained. Unfortunately the size of the space scales unfavourably as a function of system size meaning that we have only managed to compute the matrix for the smallest interesting two determinant system. We then use these results to quantify population control bias in FCIQMC for a two determinant system supplementing these analytical results with empirical results to investigate more realistic systems. We then attempt to quantify the efficiency of the FCIQMC algorithms, defining a measure of efficiency. After this we investigate the dependence of our measure on the system size. The error bar of the most efficient FCIQMC algorithm will decay fastest as a function of computer time. We then draw conclusions about the applicability of the FCIQMC method. Finally we describe an implementation of FCIQMC on a novel data flow computer architecture. In our implementation we made a modification to the FCIQMC algorithm to fit the data flow paradigm. We investigate the efficiency of the modified FCIQMC algorithm.

•Jun 1, 2015•1 citation

Semi-stochastic full configuration interaction quantum Monte Carlo: Developments and application

Nick S. Blunt, Simon D. Smart, J. A. F. Kersten +3 more

We expand upon the recent semi-stochastic adaptation to full configuration interaction quantum Monte Carlo (FCIQMC). We present an alternate method for generating the deterministic space without a priori knowledge of the wave function and present stochastic efficiencies for a variety of both molecular and lattice systems. The algorithmic details of an efficient semi-stochastic implementation are presented, with particular consideration given to the effect that the adaptation has on parallel performance in FCIQMC. We further demonstrate the benefit for calculation of reduced density matrices in FCIQMC through replica sampling, where the semi-stochastic adaptation seems to have even larger efficiency gains. We then combine these ideas to produce explicitly correlated corrected FCIQMC energies for the beryllium dimer, for which stochastic errors on the order of wavenumber accuracy are achievable.

arXiv:1502.04847•The Journal of Chemical Physics•May 14, 2015•102 citations

The Lognormal Distribution and Quantum Monte Carlo Data

Mervlyn Moodley

Quantum Monte Carlo data are often afflicted with distributions that resemble lognormal probability distributions and consequently their statistical analysis cannot be based on simple Gaussian assumptions. To this extent a method is introduced to estimate these distributions and thus give better estimates to errors associated with them. This method entails reconstructing the probability distribution of a set of data, with given mean and variance, that has been assumed to be lognormal prior to undergoing a blocking or renormalization transformation. In doing so, we perform a numerical evaluation of the renormalized sum of lognormal random variables. This technique is applied to a simple quantum model utilizing the single-thread Monte Carlo algorithm to estimate the ground state energy or dominant eigenvalue of a Hamiltonian matrix.

arXiv:cond-mat/0303594•Communications in Computational Physics•May 5, 2014•1 citation

Accelerating Convergence in Fock Space Quantum Monte Carlo Methods

Verena A. Neufeld, Alex J. W. Thom

The convergence of full configuration interaction quantum Monte Carlo (FCIQMC) is accelerated using a quasi-Newton propagation (QN) which can also be applied to coupled cluster Monte Carlo (CCMC). The computational scaling of this optimized propagation is, keeping the additional computational cost to a bare minimum. Its effects are investigated deterministically and stochastically on a model system, the uniform electron gas, with Hilbert space size up to 10 40, and shown to accelerate convergence of the instantaneous projected energy by over an order of magnitude in the FCIQMC test case. Its capabilities are then demonstrated with FCIQMC on an archetypical quantum chemistry problem, the chromium dimer, in an all-electron basis set with Hilbert space size of about 10 22 yielding highly accurate FCI energies.

arXiv:1910.05210•Journal of Chemical Theory and Computation•Jan 16, 2020•10 citations

Preconditioning and Perturbative Estimators in Full Configuration Interaction Quantum Monte Carlo

Nick S. Blunt, Alex J. W. Thom, Charles J. C. Scott

We propose the use of preconditioning in FCIQMC which, in combination with perturbative estimators, greatly increases the efficiency of the algorithm. The use of preconditioning allows a time step close to unity to be used (without time-step errors), provided that multiple spawning attempts are made per walker. We show that this approach substantially reduces statistical noise on perturbative corrections to initiator error, which improve the accuracy of FCIQMC but which can suffer from significant noise in the original scheme. Therefore, the use of preconditioning and perturbatively corrected estimators in combination leads to a significantly more efficient algorithm. In addition, a simpler approach to sampling variational and perturbative estimators in FCIQMC is presented, which also allows the variance of the energy to be calculated. These developments are investigated and applied to benzene (30e, 108o), an example where accurate treatment is not possible with the original method.

arXiv:1901.06348•Journal of Chemical Theory and Computation•May 3, 2019•26 citations
In quantum Monte Carlo (QMC) methods, energy estimators are calculated as (functions of) statistical averages of quantities sampled during a calculation. Associated statistical errors of these averages are often estimated. This error estimation is not straightforward and there are several choices of the error estimation methods. We evaluate the performance of three methods (the Straatsma method, an autoregressive model, and a blocking analysis based on von Neumann's ratio test for randomness) for the energy time series given by three QMC methods [diffusion Monte Carlo, full configuration interaction Quantum Monte Carlo (FCIQMC), and coupled cluster Monte Carlo (CCMC)]. From these analyses, we describe a hybrid analysis method which provides reliable error estimates for a series of various lengths of FCIQMC and CCMC's time series. Equally important is the estimation of the appropriate start point of the equilibrated phase. We establish that a simple mean squared error rule method as described by White [K. P. White, Jr., Simulation 69(6), 323 (1997)10.1177/003754979706900601] can provide reasonable estimations.
Two distinct types of Quantum Monte Carlo (QMC) calculations are applied to electronic structure problems such as calculating potential energy curves and producing benchmark values for reaction barriers. First, Variational and Diffusion Monte Carlo (VMC and DMC) methods using a trial wavefunction subject to the fixed node approximation were tested using the CASINO code.[1] Next, Full Configuration Interaction Quantum Monte Carlo (FCIQMC), along with its initiator extension (i-FCIQMC) were tested using the NECI code.[2] FCIQMC seeks the FCI energy for a specific basis set. At a reduced cost, the efficient i-FCIQMC method can be applied to systems in which the standard FCIQMC approach proves to be too costly. Since all of these methods are statistical approaches, uncertainties (error-bars) are introduced for each calculated energy. This study tests the performance of the methods relative to traditional quantum chemistry for some benchmark systems. References: [1] R. J. Needs et al., J. Phys.: Condensed Matter 22, 023201 (2010). [2] G. H. Booth et al., J. Chem. Phys. 131, 054106 (2009).
In this thesis we investigate the recently developed Full Configuration Interaction Quantum Monte Carlo (FCIQMC) method. This method, unlike the traditional methods in Quantum Monte Carlo (QMC), doesn’t require the use of the uncontrolled fixed node approximation and so potentially it can yield far more accurate results. This means that it can be thought of as a hybrid between the methods used by quantum chemists and QMC, and thus has spawned a new field of stochastic quantum chemistry. The work described in this thesis can be split into three distinct but interrelated parts. We begin with an investigation of the underlying FCIQMC stochastic process. We show that FCIQMC is an example of Markov Chain Monte Carlo. This means we can compute a stochastic matrix from which all details about the Monte-Carlo simulation can be obtained. Unfortunately the size of the space scales unfavourably as a function of system size meaning that we have only managed to compute the matrix for the smallest interesting two determinant system. We then use these results to quantify population control bias in FCIQMC for a two determinant system supplementing these analytical results with empirical results to investigate more realistic systems. We then attempt to quantify the efficiency of the FCIQMC algorithms, defining a measure of efficiency. After this we investigate the dependence of our measure on the system size. The error bar of the most efficient FCIQMC algorithm will decay fastest as a function of computer time. We then draw conclusions about the applicability of the FCIQMC method. Finally we describe an implementation of FCIQMC on a novel data flow computer architecture. In our implementation we made a modification to the FCIQMC algorithm to fit the data flow paradigm. We investigate the efficiency of the modified FCIQMC algorithm.
We expand upon the recent semi-stochastic adaptation to full configuration interaction quantum Monte Carlo (FCIQMC). We present an alternate method for generating the deterministic space without a priori knowledge of the wave function and present stochastic efficiencies for a variety of both molecular and lattice systems. The algorithmic details of an efficient semi-stochastic implementation are presented, with particular consideration given to the effect that the adaptation has on parallel performance in FCIQMC. We further demonstrate the benefit for calculation of reduced density matrices in FCIQMC through replica sampling, where the semi-stochastic adaptation seems to have even larger efficiency gains. We then combine these ideas to produce explicitly correlated corrected FCIQMC energies for the beryllium dimer, for which stochastic errors on the order of wavenumber accuracy are achievable.
Quantum Monte Carlo data are often afflicted with distributions that resemble lognormal probability distributions and consequently their statistical analysis cannot be based on simple Gaussian assumptions. To this extent a method is introduced to estimate these distributions and thus give better estimates to errors associated with them. This method entails reconstructing the probability distribution of a set of data, with given mean and variance, that has been assumed to be lognormal prior to undergoing a blocking or renormalization transformation. In doing so, we perform a numerical evaluation of the renormalized sum of lognormal random variables. This technique is applied to a simple quantum model utilizing the single-thread Monte Carlo algorithm to estimate the ground state energy or dominant eigenvalue of a Hamiltonian matrix.
The convergence of full configuration interaction quantum Monte Carlo (FCIQMC) is accelerated using a quasi-Newton propagation (QN) which can also be applied to coupled cluster Monte Carlo (CCMC). The computational scaling of this optimized propagation is, keeping the additional computational cost to a bare minimum. Its effects are investigated deterministically and stochastically on a model system, the uniform electron gas, with Hilbert space size up to 10 40, and shown to accelerate convergence of the instantaneous projected energy by over an order of magnitude in the FCIQMC test case. Its capabilities are then demonstrated with FCIQMC on an archetypical quantum chemistry problem, the chromium dimer, in an all-electron basis set with Hilbert space size of about 10 22 yielding highly accurate FCI energies.
We propose the use of preconditioning in FCIQMC which, in combination with perturbative estimators, greatly increases the efficiency of the algorithm. The use of preconditioning allows a time step close to unity to be used (without time-step errors), provided that multiple spawning attempts are made per walker. We show that this approach substantially reduces statistical noise on perturbative corrections to initiator error, which improve the accuracy of FCIQMC but which can suffer from significant noise in the original scheme. Therefore, the use of preconditioning and perturbatively corrected estimators in combination leads to a significantly more efficient algorithm. In addition, a simpler approach to sampling variational and perturbative estimators in FCIQMC is presented, which also allows the variance of the energy to be calculated. These developments are investigated and applied to benzene (30e, 108o), an example where accurate treatment is not possible with the original method.