Challenges
Datasets
Workspaces
Papers
Discussions
Leaderboard
Log inSign up
Challenges
Datasets
Workspaces
Papers
Discussions
Leaderboard
Blog
Job Board
Q3AS

© 2026 Aqora Quantum S.A.S.

TermsPrivacyLegal Notice

arXiv:1904.01380 · Physical Review Applied

Injection Locking and Parametric Locking in a Superconducting Circuit

Danijela Marković, Jean-Damien Pillet, Emmanuel Flurin, Nicolas Roch, Benjamin Huard

Published Aug 16, 2019• 17 citations
arXivHTMLPDF

Abstract

Injection locking replicates the frequency and phase of a driven oscillator in a target oscillator, with applications in electronic, mechanical, and optical systems, and lately in mesoscopic circuits. The technique requires the driven oscillator to be almost resonant with the target oscillator. This study uses a superconducting circuit to demonstrate injection locking in a well-controlled parametric microwave oscillator. The authors furthermore present another technique, $p\phantom{\rule{0}{0ex}}a\phantom{\rule{0}{0ex}}r\phantom{\rule{0}{0ex}}a\phantom{\rule{0}{0ex}}m\phantom{\rule{0}{0ex}}e\phantom{\rule{0}{0ex}}t\phantom{\rule{0}{0ex}}r\phantom{\rule{0}{0ex}}i\phantom{\rule{0}{0ex}}c$ $l\phantom{\rule{0}{0ex}}o\phantom{\rule{0}{0ex}}c\phantom{\rule{0}{0ex}}k\phantom{\rule{0}{0ex}}i\phantom{\rule{0}{0ex}}n\phantom{\rule{0}{0ex}}g$, that removes the constraint on detuning between the oscillators. This should impact any device that should not or cannot be close to resonant driving, as in quantum information processing.

DOI
10.1103/physrevapplied.12.024034

Related papers

Sideband injection locking of microwave frequency combs in a superconducting optomechanical circuit

Jinhoon Jeong, Younghun Ryu, Hyojae Jung +1 more

Superconducting optomechanical circuits enable frequency mixing of optical and mechanical modes, facilitating the generation of microwave frequency combs. However, such optomechanical combs suffer from frequency fluctuations, requiring their stabilization for applications in precision sensing and signal processing. Here, we investigate the sideband injection locking of microwave frequency combs in a niobium-based superconducting optomechanical circuit. By strongly driving the device with a blue-detuned pump to induce parametric instability and introducing an additional tone near individual comb peaks, we study how the locking range varies with the power, the frequency position, and the sweep direction of the injection tone. The locking responses show interesting features such as injection hysteresis, which cannot be explained by existing models. Numerical simulations of the classical optomechanical equations implementing a cubic mechanical nonlinearity show that the nonlinearity contributes to broadening the locking range. We also characterize the Allan deviations and phase noise of the injection-locked combs for different injection frequencies, demonstrating enhanced stability performance. Our results lay the foundation for the utilization of optomechanical combs for applications in nanomechanical sensing and cryogenic microwave pulse generation.

Microsystems & Nanoengineering•Nov 24, 2025•2 citations

Parametric oscillators based on superconducting circuits

Christopher M. Wilson, T. Duty, Per Delsing

A parametric oscillator is an oscillating system in which one of the parameters, typically either the resonance frequency or damping, can be modulated by an external pump. Parametric oscillations can be found in a wide variety of systems including radiofrequency circuits, optical and mechanical systems, and even single electrons in a Penning trap. In recent years, interest in parametric oscillators has revived in many areas of physics, ranging from basic physics to applications. For instance, they are being used as quantum-limited amplifiers in an increasingly large number of experiments in quantum information and computing. At the same time, interest in their basic physics in the quantum regime, in which they are a model system for driven, nonlinear systems, has grown commensurately. This chapter gives a largely self-contained introduction to the theoretical description of the dynamics of parametric oscillators, both classical and quantum, and reviews some of the recent experimental work in superconducting circuits.

Oxford University Press eBooks•Jul 26, 2012•3 citations

Parametrically pumped superconducting circuits

Philip Krantz

In this licentiate thesis, I present the design, fabrication, and characterization of superconducting parametric resonators, for use in quantum information processing. These devices are quarter-wavelength coplanar waveguide resonators (~5 GHz), terminated at one end by a non-linear inductance provided by a SQUID (superconducting quantum interference device). The SQUID acts as a flux-controlled boundary condition, which effectively changes the electrical length of the resonator. This enables the modulation of the resonant frequency by coupling microwave magnetic flux into the SQUID, using on-chip transmission lines. The modulation occurs on a timescale much faster than the photon loss out of the resonator. The non-linearity provides several different regimes for operating this device. I focused on the parametric regime, in which the non-linear element was being modulated (pumped) at or near twice the resonant frequency. This pumping can lead to amplification and frequency conversion of an incoming signal. It can also give rise to instabilities and self-oscillations "parametric oscillations" - that is, the generation of an intense electric field in the resonator (the creation of photons). Parametric oscillations set in when the pumping strength exceeds a threshold value, and also depends on the pump-frequency detuning from twice the resonance and on the static flux through the SQUID. I characterized the devices over a wide parameter range by doing homodyne detection of the reflected signal or of the emitted field oscillations. In particular, I investigated the damping and two leading nonlinearities, dominating in different operating regimes, which influence the dynamics of the parametric resonator. First, I extracted the Duffing nonlinearity by studying the line width of the resonator as a function of the input signal (without pumping the SQUID). Second, with high pump amplitude, I extracted the pump-induced nonlinearity by determining the threshold parameters (pump amplitude and detuning) for the onset of parametric oscillations; this nonlinearity leads to the generation of higher-order pump terms that complicate the system dynamics, but can be mitigated now that they have been understood. My results validate a recent theoretical model for the classical, non-linear dynamics of parametric resonance, and helps determine workable design parameters. Finally, I helped develop a linearized model $-$ the "pumpistor" - describing this device in terms of a flux-controlled impedance. This will be useful when designing more complex circuits. One goal of this work is to demonstrate single-shot measurements on superconducting qubits (quantum bits of information). We will use the parametric resonator as a threshold discriminator, associating the qubit's two energy eigenstates with the parametric oscillations either turning on or not. This would be a very useful device in the quantum engineer's toolbox when designing systems for quantum information processing and communication.

•Jan 1, 2013•1 citation

Quasiparticle-injection superconducting microwave relaxation oscillator

Giacomo Trupiano, Giorgio De Simoni, Francesco Giazotto

We propose a superconducting microwave relaxation oscillator based on a nanowire shunted by a resistor and an inductor controlled by quasiparticle injection from a tunnel junction positioned on it: the QUISTRON. This device exhibits relaxation oscillator behavior with dc voltage--controlled frequency tuning and dc bias. The device frequency is modulated via the tunnel junction, which induces localized heating by injecting quasiparticles. This heating mechanism modulates the nanowire switching current, enabling relaxation oscillations when it falls below the bias current. We simulate the device operating principles and its performance across various parameters, including different choices of shunt resistor, shunt inductance, and bath temperature ranging from 20 mK to 1 K. The device showed oscillation with a frequency range approximately between 1 and 10 GHz and total energy dissipation per cycle of approximately $100$ zJ. Our results suggest that this design offers a promising platform for compact, tunable superconducting oscillators in the microwave spectrum with potential applications in quantum information processing, microwave technology, and ultralow-power electronics. The straightforward frequency control mechanism and integration potential make this device an attractive candidate for superconducting microwave local oscillators.

arXiv:2407.14363•Physical Review Applied•Jan 22, 2025•2 citations

Parametric Cavity Quantum Electrodynamics With Superconducting Circuits and Large Cavities

Adam J. Sirois

The research reported here details experimental progress toward future superconductor-based quantum computing technologies. Specifically, we present techniques for moving quantum information between various cavity resonators -- spatially as well as between frequencies. Rather than using traditional resonant coupling though, we induce non-resonant coupling through parametric frequency conversion. This technology is mediated by chip-based, micro-fabricated, Josephson Junction circuits.\nParametric processes have the advantage over traditional coupling by allowing the constituents of the system -- for example: cavity modes or qubits -- to remain fixed in frequency, tuned to their optimal operation frequency, thereby avoiding unwanted resonant interactions. As the number of constituents grows -- as quantum computing architectures expand to more and more bits -- these techniques will become necessary to optimize performance.\nOutside of the focus on quantum computation, these techniques have wide application for materials research, quantum optics, and extending traditionally optical-frequency experiments to microwave-frequencies. To that end, we demonstrate a hybrid quantum technology which expands the toolbox of superconducting quantum information to a new system, namely sapphire whispering gallery mode resonators. These resonators have been studied in the optical frequency domain, but here we demonstrate their usefulness at microwave frequencies.\nAll of the experiments in this dissertation should be considered proof-of-principle demonstrations of a future technology. Thus, we note when and where improvements for future devices will be necessary.

•Jan 1, 2016•0 citations

Superconducting Microwave Resonators for Hybrid Quantum Systems in Extreme Conditions

Benedikt Wilde

Hybrid quantum systems play an essential role in efforts towards the advancements of quantum information technology and quantum sensing by bridging distinct technological platforms. In particular, hybrid systems comprising superconducting microwave circuits are being pursued intensely in light of existing achievements in superconducting qubits and precise quantum control in microwave circuits. Their realization relies on the design of superconducting resonators capable of coupling to an oscillatory mode of a second quantum system, facilitating the probing and manipulation of one via the other. In order to accommodate the coupled system, its particular constraints and requirements must be respected, which may be quite extreme from the perspective of established superconducting circuit design and operation. Overcoming this challenge has proved to be a substantial obstacle for the attainment of strongly coupled hybrid systems, despite spectacular advances in superconducting microwave circuits individually. In this work, we examine two approaches tackling this issue for different hybrid quantum systems, focusing on the optimization and characterization of the superconducting circuits. The first device aims at a superconductor-atom hybrid system through the coupling to Rydberg-Rydberg transitions in ultra-cold Rb-87 atoms trapped near the superconducting chip. Using simulations in conjunction with theoretical considerations, we demonstrate a comprehensive geometry parameter optimization procedure for maximum coupling rate. Presenting an experimental implementation of the resulting circuit, we validate its suitability for use under the intended operation conditions, including the option of tuning the electronic transition frequencies using a dc voltage. Secondly, we investigate a device designed for applications in large magnetic in-plane fields used to mediate coupling to integrated micromechanical oscillators; more specifically it is a flux-tunable SQUID resonator comprising Josephson nano-constrictions as nonlinear inductive components. Performing a thorough characterization of its frequency and Kerr anharmonicity tuning behavior at fields up to several hundred mT, we discover a pronounced asymmetry in its flux response at large fields. We show this asymmetry to be caused by the nano-constrictions turning into Josephson diodes, develop an intuitive macroscopic model for its field-induced emergence and reconstruct the diode current-phase relation from the flux tuning data. Several figures of merit informing the suitability of the SQUID resonators for optomechanical systems as well as other applications are improved by the diode effect, highlighting the potential of Josephson diodes in superconducting microwave circuits. Our results provide a promising stepping stone for the advancement of hybrid systems involving superconducting microwave circuits, putting new and exciting operation and coupling regimes within reach.

•Mar 6, 2026•0 citations
Injection locking replicates the frequency and phase of a driven oscillator in a target oscillator, with applications in electronic, mechanical, and optical systems, and lately in mesoscopic circuits. The technique requires the driven oscillator to be almost resonant with the target oscillator. This study uses a superconducting circuit to demonstrate injection locking in a well-controlled parametric microwave oscillator. The authors furthermore present another technique, p\phantom{\rule{0}{0ex}}a\phantom{\rule{0}{0ex}}r\phantom{\rule{0}{0ex}}a\phantom{\rule{0}{0ex}}m\phantom{\rule{0}{0ex}}e\phantom{\rule{0}{0ex}}t\phantom{\rule{0}{0ex}}r\phantom{\rule{0}{0ex}}i\phantom{\rule{0}{0ex}}c l\phantom{\rule{0}{0ex}}o\phantom{\rule{0}{0ex}}c\phantom{\rule{0}{0ex}}k\phantom{\rule{0}{0ex}}i\phantom{\rule{0}{0ex}}n\phantom{\rule{0}{0ex}}g, that removes the constraint on detuning between the oscillators. This should impact any device that should not or cannot be close to resonant driving, as in quantum information processing.
Superconducting optomechanical circuits enable frequency mixing of optical and mechanical modes, facilitating the generation of microwave frequency combs. However, such optomechanical combs suffer from frequency fluctuations, requiring their stabilization for applications in precision sensing and signal processing. Here, we investigate the sideband injection locking of microwave frequency combs in a niobium-based superconducting optomechanical circuit. By strongly driving the device with a blue-detuned pump to induce parametric instability and introducing an additional tone near individual comb peaks, we study how the locking range varies with the power, the frequency position, and the sweep direction of the injection tone. The locking responses show interesting features such as injection hysteresis, which cannot be explained by existing models. Numerical simulations of the classical optomechanical equations implementing a cubic mechanical nonlinearity show that the nonlinearity contributes to broadening the locking range. We also characterize the Allan deviations and phase noise of the injection-locked combs for different injection frequencies, demonstrating enhanced stability performance. Our results lay the foundation for the utilization of optomechanical combs for applications in nanomechanical sensing and cryogenic microwave pulse generation.
A parametric oscillator is an oscillating system in which one of the parameters, typically either the resonance frequency or damping, can be modulated by an external pump. Parametric oscillations can be found in a wide variety of systems including radiofrequency circuits, optical and mechanical systems, and even single electrons in a Penning trap. In recent years, interest in parametric oscillators has revived in many areas of physics, ranging from basic physics to applications. For instance, they are being used as quantum-limited amplifiers in an increasingly large number of experiments in quantum information and computing. At the same time, interest in their basic physics in the quantum regime, in which they are a model system for driven, nonlinear systems, has grown commensurately. This chapter gives a largely self-contained introduction to the theoretical description of the dynamics of parametric oscillators, both classical and quantum, and reviews some of the recent experimental work in superconducting circuits.
In this licentiate thesis, I present the design, fabrication, and characterization of superconducting parametric resonators, for use in quantum information processing. These devices are quarter-wavelength coplanar waveguide resonators (~5 GHz), terminated at one end by a non-linear inductance provided by a SQUID (superconducting quantum interference device). The SQUID acts as a flux-controlled boundary condition, which effectively changes the electrical length of the resonator. This enables the modulation of the resonant frequency by coupling microwave magnetic flux into the SQUID, using on-chip transmission lines. The modulation occurs on a timescale much faster than the photon loss out of the resonator. The non-linearity provides several different regimes for operating this device. I focused on the parametric regime, in which the non-linear element was being modulated (pumped) at or near twice the resonant frequency. This pumping can lead to amplification and frequency conversion of an incoming signal. It can also give rise to instabilities and self-oscillations "parametric oscillations" - that is, the generation of an intense electric field in the resonator (the creation of photons). Parametric oscillations set in when the pumping strength exceeds a threshold value, and also depends on the pump-frequency detuning from twice the resonance and on the static flux through the SQUID. I characterized the devices over a wide parameter range by doing homodyne detection of the reflected signal or of the emitted field oscillations. In particular, I investigated the damping and two leading nonlinearities, dominating in different operating regimes, which influence the dynamics of the parametric resonator. First, I extracted the Duffing nonlinearity by studying the line width of the resonator as a function of the input signal (without pumping the SQUID). Second, with high pump amplitude, I extracted the pump-induced nonlinearity by determining the threshold parameters (pump amplitude and detuning) for the onset of parametric oscillations; this nonlinearity leads to the generation of higher-order pump terms that complicate the system dynamics, but can be mitigated now that they have been understood. My results validate a recent theoretical model for the classical, non-linear dynamics of parametric resonance, and helps determine workable design parameters. Finally, I helped develop a linearized model −-− the "pumpistor" - describing this device in terms of a flux-controlled impedance. This will be useful when designing more complex circuits. One goal of this work is to demonstrate single-shot measurements on superconducting qubits (quantum bits of information). We will use the parametric resonator as a threshold discriminator, associating the qubit's two energy eigenstates with the parametric oscillations either turning on or not. This would be a very useful device in the quantum engineer's toolbox when designing systems for quantum information processing and communication.
We propose a superconducting microwave relaxation oscillator based on a nanowire shunted by a resistor and an inductor controlled by quasiparticle injection from a tunnel junction positioned on it: the QUISTRON. This device exhibits relaxation oscillator behavior with dc voltage--controlled frequency tuning and dc bias. The device frequency is modulated via the tunnel junction, which induces localized heating by injecting quasiparticles. This heating mechanism modulates the nanowire switching current, enabling relaxation oscillations when it falls below the bias current. We simulate the device operating principles and its performance across various parameters, including different choices of shunt resistor, shunt inductance, and bath temperature ranging from 20 mK to 1 K. The device showed oscillation with a frequency range approximately between 1 and 10 GHz and total energy dissipation per cycle of approximately 100100100 zJ. Our results suggest that this design offers a promising platform for compact, tunable superconducting oscillators in the microwave spectrum with potential applications in quantum information processing, microwave technology, and ultralow-power electronics. The straightforward frequency control mechanism and integration potential make this device an attractive candidate for superconducting microwave local oscillators.
The research reported here details experimental progress toward future superconductor-based quantum computing technologies. Specifically, we present techniques for moving quantum information between various cavity resonators -- spatially as well as between frequencies. Rather than using traditional resonant coupling though, we induce non-resonant coupling through parametric frequency conversion. This technology is mediated by chip-based, micro-fabricated, Josephson Junction circuits.\nParametric processes have the advantage over traditional coupling by allowing the constituents of the system -- for example: cavity modes or qubits -- to remain fixed in frequency, tuned to their optimal operation frequency, thereby avoiding unwanted resonant interactions. As the number of constituents grows -- as quantum computing architectures expand to more and more bits -- these techniques will become necessary to optimize performance.\nOutside of the focus on quantum computation, these techniques have wide application for materials research, quantum optics, and extending traditionally optical-frequency experiments to microwave-frequencies. To that end, we demonstrate a hybrid quantum technology which expands the toolbox of superconducting quantum information to a new system, namely sapphire whispering gallery mode resonators. These resonators have been studied in the optical frequency domain, but here we demonstrate their usefulness at microwave frequencies.\nAll of the experiments in this dissertation should be considered proof-of-principle demonstrations of a future technology. Thus, we note when and where improvements for future devices will be necessary.
Hybrid quantum systems play an essential role in efforts towards the advancements of quantum information technology and quantum sensing by bridging distinct technological platforms. In particular, hybrid systems comprising superconducting microwave circuits are being pursued intensely in light of existing achievements in superconducting qubits and precise quantum control in microwave circuits. Their realization relies on the design of superconducting resonators capable of coupling to an oscillatory mode of a second quantum system, facilitating the probing and manipulation of one via the other. In order to accommodate the coupled system, its particular constraints and requirements must be respected, which may be quite extreme from the perspective of established superconducting circuit design and operation. Overcoming this challenge has proved to be a substantial obstacle for the attainment of strongly coupled hybrid systems, despite spectacular advances in superconducting microwave circuits individually. In this work, we examine two approaches tackling this issue for different hybrid quantum systems, focusing on the optimization and characterization of the superconducting circuits. The first device aims at a superconductor-atom hybrid system through the coupling to Rydberg-Rydberg transitions in ultra-cold Rb-87 atoms trapped near the superconducting chip. Using simulations in conjunction with theoretical considerations, we demonstrate a comprehensive geometry parameter optimization procedure for maximum coupling rate. Presenting an experimental implementation of the resulting circuit, we validate its suitability for use under the intended operation conditions, including the option of tuning the electronic transition frequencies using a dc voltage. Secondly, we investigate a device designed for applications in large magnetic in-plane fields used to mediate coupling to integrated micromechanical oscillators; more specifically it is a flux-tunable SQUID resonator comprising Josephson nano-constrictions as nonlinear inductive components. Performing a thorough characterization of its frequency and Kerr anharmonicity tuning behavior at fields up to several hundred mT, we discover a pronounced asymmetry in its flux response at large fields. We show this asymmetry to be caused by the nano-constrictions turning into Josephson diodes, develop an intuitive macroscopic model for its field-induced emergence and reconstruct the diode current-phase relation from the flux tuning data. Several figures of merit informing the suitability of the SQUID resonators for optomechanical systems as well as other applications are improved by the diode effect, highlighting the potential of Josephson diodes in superconducting microwave circuits. Our results provide a promising stepping stone for the advancement of hybrid systems involving superconducting microwave circuits, putting new and exciting operation and coupling regimes within reach.