Challenges
Datasets
Workspaces
Papers
Discussions
Leaderboard
Log inSign up
Challenges
Datasets
Workspaces
Papers
Discussions
Leaderboard
Blog
Job Board
Q3AS

© 2026 Aqora Quantum S.A.S.

TermsPrivacyLegal Notice

arXiv:1902.08501 · Quantum Science and Technology

Development of transmon qubits solely from optical lithography on 300 mm wafers

N Foroozani, C Hobbs, C C Hung, S Olson, D Ashworth, E Holland, M Malloy, P Kearney, B O’Brien, B Bunday, D DiPaola, W Advocate, T Murray, P Hansen, S Novak, S Bennett, M Rodgers, B Baker-O’Neal, B Sapp, E Barth, J Hedrick, R Goldblatt, S S Papa Rao, K D Osborn

Published Mar 5, 2019• 14 citations
arXivHTMLPDF

Abstract

Abstract Qubit information processors are increasing in footprint but currently rely on e-beam lithography for patterning the required Josephson junctions (JJs). Advanced optical lithography is an alternative patterning method, and we report on the development of transmon qubits patterned solely with optical lithography. The lithography uses 193 nm wavelength exposure and 300 mm large silicon wafers. Qubits and arrays of evaluation JJs were patterned with process control which resulted in narrow feature distributions: a standard deviation of 0.78% for a 220 nm linewidth pattern realized across over half the width of the wafers. Room temperature evaluation found a 2.8%–3.6% standard deviation in JJ resistance in completed chips. The qubits used aluminum and titanium nitride films on silicon substrates without substantial silicon etching. T 1 times of the qubits were extracted at 26–27 μ s, indicating a low level of material-based qubit defects. This study shows that large wafer optical lithography on silicon is adequate for high-quality transmon qubits, and shows a promising path for improving many-qubit processors.

DOI
10.1088/2058-9565/ab0ca8

Related papers

Free-standing silicon shadow masks for transmon qubit fabrication

I. Tsioutsios, Kyle Serniak, S. Diamond +6 more

Nanofabrication techniques for superconducting qubits rely on resist-based masks patterned by electron-beam or optical lithography. We have developed an alternative nanofabrication technique based on free-standing silicon shadow masks fabricated from silicon-on-insulator wafers. These silicon shadow masks not only eliminate organic residues associated with resist-based lithography, but also provide a pathway to better understand and control surface-dielectric losses in superconducting qubits by decoupling mask fabrication from substrate preparation. We have successfully fabricated aluminum 3D transmon superconducting qubits with these shadow masks and found coherence quality factors comparable to those fabricated with standard techniques.

arXiv:1911.05924•AIP Advances•Jun 1, 2020•25 citations

Manufacturing of Superconducting Qubits Using Nb/Al-AlO x /Nb Josephson Junctions on Silicon Substrate

Qingjian Li, Y. F. Wu, Zhengqi Niu +4 more

Superconducting qubits stand as a pivotal platform for quantum computing, where scalable fabrication is crucial for building complex quantum circuits. Here, we develop a fabrication process for Nb/Al-AlOx/Nb tri-layer Josephson junctions on 4-inch silicon wafers using full-stepper lithography. Utilizing this process, we have produced both transmon and C-shunt flux qubits. The well-behavedI-Vcharacteristics of junction arrays containing up to 1000 junctions highlight the excellent uniformity and scalability of our process. Furthermore, by introducing a RIE pre-etch before BOE treatment to remove most of the SiO2insulator, we have suppressed dielectric loss and increased the coherence time of the Nb-based transmon qubit by almost 10 times, achieving a quality factor comparable to state-of-the-art Nb-based qubits on sapphire substrates. Given its compatibility with silicon technology, our method paves the way for the integration of multi-qubit processors and the co-fabrication of complex quantum circuits.

IEEE Transactions on Applied Superconductivity•Jan 28, 2026•1 citation

SiMOS quantum-dot spin qubits enabled by extreme-ultraviolet lithography

Thomas Van Caekenberghe, Paul Steinacker, Bart Raes +31 more

The realization of large-scale silicon quantum processors requires spin qubits compatible with advanced semiconductor manufacturing technologies, demanding lithographic processes that combine nanometer-scale precision with exceptional uniformity. Although the highest-performing silicon spin qubits demonstrated to date have relied on electron-beam (e-beam) lithography, its serial exposure process limits reproducibility studies and wafer-scale fabrication. Here, we demonstrate high-performance silicon metal-oxide-semiconductor (SiMOS) spin qubits fabricated using extreme-ultraviolet (EUV) lithography in a 300 mm semiconductor pilot line. We report wafer-scale quantum-dot uniformity metrics, including 100 % room-temperature gate-to-gate leakage yield and sub-nanometer control of critical gate dimensions. We characterize four double-dot systems realized in two triple-quantum-dot devices. Gate set tomography (GST) reveals consistently high fidelities across all four systems, with values up to 99.8 % for SPAM, 99.9 % for single-qubit gates, and 99.1 % for two-qubit gates. The devices exhibit highly reproducible exchange turn-on characteristics of 10-13 dec/V, indicating high fabrication uniformity enabled by EUV patterning. These results establish EUV lithography as a viable manufacturing technology for quantum processors based on high-fidelity SiMOS spin qubits.

cond-mat.mes-hallCross-listedarXiv:2607.13121•Jul 15, 2026

Advanced CMOS manufacturing of superconducting qubits on 300 mm wafers

Jacques Van Damme, Shana Massar, R. Acharya +13 more

Abstract The development of superconducting qubit technology has shown great potential for the construction of practical quantum computers 1,2 . As the complexity of quantum processors continues to grow, the need for stringent fabrication tolerances becomes increasingly critical 3 . Utilizing advanced industrial fabrication processes could facilitate the necessary level of fabrication control to support the continued scaling of quantum processors. However, at present, these industrial processes are not optimized to produce high-coherence devices, nor are they a priori compatible with the approaches commonly used to make superconducting qubits. Here we demonstrate superconducting transmon qubits manufactured in a 300 mm complementary metal–oxide–semiconductor (CMOS) pilot line using industrial fabrication methods, with resulting relaxation and coherence times exceeding 100 μs. We show across-wafer, large-scale statistics of coherence, yield, variability and ageing that confirm the validity of our approach. The presented industry-scale fabrication process, which uses only optical lithography and reactive-ion etching, has a performance and yield in line with conventional laboratory-style techniques utilizing metal lift-off, angled evaporation and electron-beam writing 4 . Moreover, it offers the potential for further upscaling through three-dimensional integration 5 and more process optimization. This result marks the advent of an alternative and new, large-scale, truly CMOS-compatible fabrication method for superconducting quantum computing processors.

arXiv:2403.01312•Nature•Sep 18, 2024•89 citations

On-chip stencil lithography for superconducting qubits

Roudy Hanna, Soeren Ihssen, Simon Geisert +22 more

Improvements in circuit design and, more recently, in materials and surface cleaning have contributed to a rapid development of coherent superconducting qubits. However, organic resists commonly used for shadow evaporation of Josephson junctions (JJs) pose limitations due to residual contamination, poor thermal stability, and compatibility under typical surface-cleaning conditions. To provide an alternative, we developed an inorganic SiO2/Si3N4 on-chip stencil lithography mask for JJ fabrication. The stencil mask is resilient to aggressive cleaning agents and it withstands high temperatures up to 1200 °C, thereby opening new avenues for JJ material exploration and interface optimization. To validate the concept, we performed shadow evaporation of Al-based transmon qubits followed by stencil mask liftoff using vapor hydrofluoric acid, which selectively etches SiO2. We demonstrate an average T1≈75±11 μs over a 200 MHz frequency range across multiple cooldowns for one device, and T1≈44±8 μs for a second device. These results confirm the compatibility of stencil lithography with state-of-the-art superconducting quantum devices and motivate further investigations into materials engineering, film deposition, and surface cleaning techniques.

arXiv:2507.17005•Applied Physics Reviews•Apr 6, 2026•4 citations

Progress towards enabling quantum engineering

Satyavolu S. Papa Rao, Chris Hobbs, Hyuncher Chong +1 more

Ongoing research at SUNY Polytechnic Institute to enable large scale fabrication of quantum devices with tightly controlled performance characteristics will be presented. Josephson junctions and transmon qubits patterned with 193 nm lithography will be used to illustrate how advanced process tools can control critical dimensions of devices, necessary for building larger ensembles of qubits. Advances in the CMOS industry enable superior surface roughness and interface quality to be achieved across the entire 300mm wafer – some examples will be presented. The integration of photonic circuits (waveguides and on-chip cryogenic IR emitters) with superconducting Josephson junctions to enable large-scale neuromorphic computing structures in the near future will be discussed. Ongoing work on developing materials and processes for UV-transparent photonic circuits at 300mm will be presented – such chips could be useful as part of the interface to trapped ion qubits. The talk will wrap up with a discussion of the synergies in technology development, and functionality integration that can be achieved using an advanced fabrication facility.

Photonics for Quantum (PfQ)•Aug 27, 2021•0 citations
Abstract Qubit information processors are increasing in footprint but currently rely on e-beam lithography for patterning the required Josephson junctions (JJs). Advanced optical lithography is an alternative patterning method, and we report on the development of transmon qubits patterned solely with optical lithography. The lithography uses 193 nm wavelength exposure and 300 mm large silicon wafers. Qubits and arrays of evaluation JJs were patterned with process control which resulted in narrow feature distributions: a standard deviation of 0.78% for a 220 nm linewidth pattern realized across over half the width of the wafers. Room temperature evaluation found a 2.8%–3.6% standard deviation in JJ resistance in completed chips. The qubits used aluminum and titanium nitride films on silicon substrates without substantial silicon etching. T 1 times of the qubits were extracted at 26–27 μ s, indicating a low level of material-based qubit defects. This study shows that large wafer optical lithography on silicon is adequate for high-quality transmon qubits, and shows a promising path for improving many-qubit processors.
Nanofabrication techniques for superconducting qubits rely on resist-based masks patterned by electron-beam or optical lithography. We have developed an alternative nanofabrication technique based on free-standing silicon shadow masks fabricated from silicon-on-insulator wafers. These silicon shadow masks not only eliminate organic residues associated with resist-based lithography, but also provide a pathway to better understand and control surface-dielectric losses in superconducting qubits by decoupling mask fabrication from substrate preparation. We have successfully fabricated aluminum 3D transmon superconducting qubits with these shadow masks and found coherence quality factors comparable to those fabricated with standard techniques.
Superconducting qubits stand as a pivotal platform for quantum computing, where scalable fabrication is crucial for building complex quantum circuits. Here, we develop a fabrication process for Nb/Al-AlOx/Nb tri-layer Josephson junctions on 4-inch silicon wafers using full-stepper lithography. Utilizing this process, we have produced both transmon and C-shunt flux qubits. The well-behavedI-Vcharacteristics of junction arrays containing up to 1000 junctions highlight the excellent uniformity and scalability of our process. Furthermore, by introducing a RIE pre-etch before BOE treatment to remove most of the SiO2insulator, we have suppressed dielectric loss and increased the coherence time of the Nb-based transmon qubit by almost 10 times, achieving a quality factor comparable to state-of-the-art Nb-based qubits on sapphire substrates. Given its compatibility with silicon technology, our method paves the way for the integration of multi-qubit processors and the co-fabrication of complex quantum circuits.
The realization of large-scale silicon quantum processors requires spin qubits compatible with advanced semiconductor manufacturing technologies, demanding lithographic processes that combine nanometer-scale precision with exceptional uniformity. Although the highest-performing silicon spin qubits demonstrated to date have relied on electron-beam (e-beam) lithography, its serial exposure process limits reproducibility studies and wafer-scale fabrication. Here, we demonstrate high-performance silicon metal-oxide-semiconductor (SiMOS) spin qubits fabricated using extreme-ultraviolet (EUV) lithography in a 300 mm semiconductor pilot line. We report wafer-scale quantum-dot uniformity metrics, including 100 % room-temperature gate-to-gate leakage yield and sub-nanometer control of critical gate dimensions. We characterize four double-dot systems realized in two triple-quantum-dot devices. Gate set tomography (GST) reveals consistently high fidelities across all four systems, with values up to 99.8 % for SPAM, 99.9 % for single-qubit gates, and 99.1 % for two-qubit gates. The devices exhibit highly reproducible exchange turn-on characteristics of 10-13 dec/V, indicating high fabrication uniformity enabled by EUV patterning. These results establish EUV lithography as a viable manufacturing technology for quantum processors based on high-fidelity SiMOS spin qubits.
Abstract The development of superconducting qubit technology has shown great potential for the construction of practical quantum computers 1,2 . As the complexity of quantum processors continues to grow, the need for stringent fabrication tolerances becomes increasingly critical 3 . Utilizing advanced industrial fabrication processes could facilitate the necessary level of fabrication control to support the continued scaling of quantum processors. However, at present, these industrial processes are not optimized to produce high-coherence devices, nor are they a priori compatible with the approaches commonly used to make superconducting qubits. Here we demonstrate superconducting transmon qubits manufactured in a 300 mm complementary metal–oxide–semiconductor (CMOS) pilot line using industrial fabrication methods, with resulting relaxation and coherence times exceeding 100 μs. We show across-wafer, large-scale statistics of coherence, yield, variability and ageing that confirm the validity of our approach. The presented industry-scale fabrication process, which uses only optical lithography and reactive-ion etching, has a performance and yield in line with conventional laboratory-style techniques utilizing metal lift-off, angled evaporation and electron-beam writing 4 . Moreover, it offers the potential for further upscaling through three-dimensional integration 5 and more process optimization. This result marks the advent of an alternative and new, large-scale, truly CMOS-compatible fabrication method for superconducting quantum computing processors.
Improvements in circuit design and, more recently, in materials and surface cleaning have contributed to a rapid development of coherent superconducting qubits. However, organic resists commonly used for shadow evaporation of Josephson junctions (JJs) pose limitations due to residual contamination, poor thermal stability, and compatibility under typical surface-cleaning conditions. To provide an alternative, we developed an inorganic SiO2/Si3N4 on-chip stencil lithography mask for JJ fabrication. The stencil mask is resilient to aggressive cleaning agents and it withstands high temperatures up to 1200 °C, thereby opening new avenues for JJ material exploration and interface optimization. To validate the concept, we performed shadow evaporation of Al-based transmon qubits followed by stencil mask liftoff using vapor hydrofluoric acid, which selectively etches SiO2. We demonstrate an average T1≈75±11 μs over a 200 MHz frequency range across multiple cooldowns for one device, and T1≈44±8 μs for a second device. These results confirm the compatibility of stencil lithography with state-of-the-art superconducting quantum devices and motivate further investigations into materials engineering, film deposition, and surface cleaning techniques.
Ongoing research at SUNY Polytechnic Institute to enable large scale fabrication of quantum devices with tightly controlled performance characteristics will be presented. Josephson junctions and transmon qubits patterned with 193 nm lithography will be used to illustrate how advanced process tools can control critical dimensions of devices, necessary for building larger ensembles of qubits. Advances in the CMOS industry enable superior surface roughness and interface quality to be achieved across the entire 300mm wafer – some examples will be presented. The integration of photonic circuits (waveguides and on-chip cryogenic IR emitters) with superconducting Josephson junctions to enable large-scale neuromorphic computing structures in the near future will be discussed. Ongoing work on developing materials and processes for UV-transparent photonic circuits at 300mm will be presented – such chips could be useful as part of the interface to trapped ion qubits. The talk will wrap up with a discussion of the synergies in technology development, and functionality integration that can be achieved using an advanced fabrication facility.