Challenges
Datasets
Workspaces
Papers
Discussions
Leaderboard
Log inSign up
Challenges
Datasets
Workspaces
Papers
Discussions
Leaderboard
Blog
Job Board
Q3AS

© 2026 Aqora Quantum S.A.S.

TermsPrivacyLegal Notice

arXiv:1902.07763 · Optica

Optomechanically amplified wavelength conversion in diamond microcavities

Matthew Mitchell, David P. Lake, Paul E. Barclay

Published Jun 27, 2019• 18 citations
arXivHTMLPDF

Abstract

Efficient, low noise conversion between different colors of light is a necessary tool for interfacing quantum optical technologies that have different operating wavelengths. Optomechanically mediated wavelength conversion and amplification is a potential method for realizing this technology, and is demonstrated here in microdisks fabricated from single crystal diamond--a material that can host a wide range of quantum emitters. Frequency up--conversion is demonstrated with internal conversion efficiency of $\sim$45% using both narrow and broadband probe fields, and optomechanical frequency conversion with amplification is demonstrated in the optical regime for the first time.

DOI
10.1364/optica.6.000832

Related papers

Diamond optomechanical cavity with a color center for coherent microwave-to-optical quantum interfaces

Byunggi Kim, Hodaka Kurokawa, K. Sakai +3 more

Quantum transduction between microwave and optical photons plays a key role in quantum communication among remote qubits. Although the quantum transduction schemes generating communication photons have been successfully demonstrated by using optomechanical interfaces, the low conversion efficiency remains an obstacle to the implementation of a quantum network consisting of multiple qubits. Here, we present an efficient quantum transduction scheme using a one-dimensional diamond optomechanical crystal cavity tuned at a color-center emission without optomechanical coupling. The optomechanical crystal cavity incorporates a thin aluminum nitride ($\mathrm{Al}\mathrm{N}$) pad piezoelectric coupler near the concentrator cavity region, while retaining ultrasmall mechanical and optical mode volumes of about $1.5\phantom{\rule{0.1em}{0ex}}\ifmmode\times\else\texttimes\fi{}\phantom{\rule{0.1em}{0ex}}{10}^{\ensuremath{-}4}({\mathrm{\ensuremath{\Lambda}}}_{p}{)}^{3}$ and $0.2(\ensuremath{\lambda}/n{)}^{3}$, respectively. The energy level of a coherent color-center electron is manipulated by a strong mechanical-mode--color-center electron-coupling rate up to 16.4 MHz. In our system, we theoretically predict that the population-conversion efficiency from a single microwave photon into an optical photon can reach 15% combined with current technologies. The coherent conversion efficiency is over 10% with a reasonably pure decay time of ${T}_{2}^{\ensuremath{\ast}}>10\phantom{\rule{0.25em}{0ex}}\mathrm{ns}$. Our results imply that an atomic color center strongly coupled to the optomechanical crystal cavity will offer a highly efficient quantum transduction platform.

arXiv:2305.08306•Physical Review Applied•Oct 13, 2023•14 citations

Low-Noise Amplification and Frequency Conversion with a Multiport Microwave Optomechanical Device

Caspar F. Ockeloen-Korppi, Erno Damskägg, J.-M. Pirkkalainen +3 more

High-gain amplifiers of electromagnetic signals operating near the quantum limit are crucial for quantum information systems and ultrasensitive quantum measurements.However, the existing techniques have a limited gain-bandwidth product and only operate with weak input signals.Here, we demonstrate a two-port optomechanical scheme for amplification and routing of microwave signals, a system that simultaneously performs high-gain amplification and frequency conversion in the quantum regime.Our amplifier, implemented in a two-cavity microwave optomechanical device, shows 41 dB of gain and has a high dynamic range, handling input signals up to 10 13 photons per second, 3 orders of magnitude more than corresponding Josephson parametric amplifiers.We show that although the active medium, the mechanical resonator, is at a high temperature far from the quantum limit, only 4.6 quanta of noise is added to the input signal.Our method can be readily applied to a wide variety of optomechanical systems, including hybrid optical-microwave systems, creating a universal hub for signals at the quantum level.

arXiv:1602.05779•Physical Review X•Oct 28, 2016•67 citations

Frequency upconversion of infrared signals via molecular optomechanical cavities

Fen Zou, Shu-Xian Quan, Yong Li +1 more

Molecular optomechanical cavities have recently emerged as a promising platform for frequency upconversion, enabling the quantum coherent conversion of infrared signal into the visible range. In a recent work [F. Zou et al., Phys. Rev. Lett. 132, 153602 (2024)], we proposed an amplification mechanism that can enhance the intensity of the upconverted infrared signals by a factor of 1000 or more within such a cavity under the ideal case without any noise. In this work, we employ the power spectrum method to investigate the noise added to the upconverted signal in a molecular optomechanical cavity along with the conversion efficiency from infrared signal into visible range. In the red-detuned regime, the anti-Stokes sideband achieves superior conversion efficiency relative to the Stokes sideband. Conversely, the Stokes sideband dominates under the blue-detuned condition, which amplifies the infrared signal. We further demonstrate the dependence of the added noise on the coupling strength and decay rates of the system. In particular, we find that when the infrared signal is amplified, the added noise approaches the quantum limit of one quantum.

quant-pharXiv:2604.17882•Apr 21, 2026

Frequency down-conversion for efficient, low-noise quantum frequency converters

Jan Fabian Geus, Florian Elsen, Sebastian Nyga +3 more

We present a novel device for the efficient, low-noise down-conversion of low-power light from the red visible spectrum. It can be applied to interface electronic spin-qubits in nitrogen-vacancy centers in diamond to the telecommunication wavelengths and thus offers the possibility to implement large-scale quantum networks in existing fiber infrastructure. In comparison to state-of-the-art frequency converters for this application, the device presented here generates an overall noise rate, which is one order of magnitude better than current record values. Simultaneously, an internal conversion efficiency of 50 % was measured. Furthermore, the converter serves as a feasibility demonstration of a general concept for the down-conversion of light from the sub-micron spectral range to telecommunication wavelengths.

Quantum Computing, Communication, and Simulation•Mar 2, 2022•1 citation

Optomechanical driving of spins

Prasoon Kumar Shandilya, David P. Lake, Matthew Mitchell +2 more

Quantum networks enable a broad range of practical and fundamental applications. Experimental realization of such networks is hampered by many challenges, one of them being a lack of an efficient interface between stationary and flying qubits working at room temperature. We demonstrate an interface between ensembles of the nitrogen-vacancy centers in diamond and photons with wavelengths near 1550 nm. Photons are coupled to spins via local dynamical stress produced by optomechanical driving of a diamond microdisk. Our approach does not involve intrinsic optical transitions and can be easily adapted to many other colour centers.

Quantum Computing, Communication, and Simulation•Mar 4, 2021•0 citations

Efficient Conversion of Optical to Mechanical States Close to the Single-Quantum Level

Alexander Rolf Korsch, Liu Chen, Pedro V. Pinho +5 more

Coherent interfaces between optical photons and mechanical excitations provide a promising route towards phonon-state engineering and hybrid quantum information processing. Cavity optomechanical systems enable such interfaces via optomechanically induced transparency (OMIT), allowing coherent mapping between traveling optical fields and localized mechanical modes. However, previous implementations of OMIT conversion protocols were limited to classical input signals with large coherent state photon numbers due to room temperature operation and corresponding thermal mechanical noise. Here, we demonstrate efficient low-noise photon-phonon state transfer close to the single-quantum regime in an optomechanical crystal operated at Millikelvin temperatures. Using weak coherent optical input pulses at the few-photon level, we achieve a record-level photon-phonon conversion efficiency of $η=0.76$, a mechanical storage lifetime of $T_\mathrm{1}=7.3~μs$, and a tunable conversion bandwidth exceeding 4.5 MHz. Hanbury Brown-Twiss measurements of the retrieved signal demonstrate the coherent nature of the converted phononic state, evidencing low added thermal noise in the conversion process ($n_\mathrm{th}=9.0$). These results establish optomechanical crystals as efficient optical interfaces to GHz mechanical modes and provide a pathway toward deterministic single-quantum-level mechanical state preparation.

quant-pharXiv:2609.04150•Sep 4, 2026•0 citations
Efficient, low noise conversion between different colors of light is a necessary tool for interfacing quantum optical technologies that have different operating wavelengths. Optomechanically mediated wavelength conversion and amplification is a potential method for realizing this technology, and is demonstrated here in microdisks fabricated from single crystal diamond--a material that can host a wide range of quantum emitters. Frequency up--conversion is demonstrated with internal conversion efficiency of ∼\sim∼45% using both narrow and broadband probe fields, and optomechanical frequency conversion with amplification is demonstrated in the optical regime for the first time.
Quantum transduction between microwave and optical photons plays a key role in quantum communication among remote qubits. Although the quantum transduction schemes generating communication photons have been successfully demonstrated by using optomechanical interfaces, the low conversion efficiency remains an obstacle to the implementation of a quantum network consisting of multiple qubits. Here, we present an efficient quantum transduction scheme using a one-dimensional diamond optomechanical crystal cavity tuned at a color-center emission without optomechanical coupling. The optomechanical crystal cavity incorporates a thin aluminum nitride (AlN\mathrm{Al}\mathrm{N}AlN) pad piezoelectric coupler near the concentrator cavity region, while retaining ultrasmall mechanical and optical mode volumes of about $1.5\phantom{\rule{0.1em}{0ex}}\ifmmode\times\else\texttimes\fi{}\phantom{\rule{0.1em}{0ex}}{10}^{\ensuremath{-}4}({\mathrm{\ensuremath{\Lambda}}}_{p}{)}^{3}$ and $0.2(\ensuremath{\lambda}/n{)}^{3}$, respectively. The energy level of a coherent color-center electron is manipulated by a strong mechanical-mode--color-center electron-coupling rate up to 16.4 MHz. In our system, we theoretically predict that the population-conversion efficiency from a single microwave photon into an optical photon can reach 15% combined with current technologies. The coherent conversion efficiency is over 10% with a reasonably pure decay time of ${T}_{2}^{\ensuremath{\ast}}>10\phantom{\rule{0.25em}{0ex}}\mathrm{ns}$. Our results imply that an atomic color center strongly coupled to the optomechanical crystal cavity will offer a highly efficient quantum transduction platform.
High-gain amplifiers of electromagnetic signals operating near the quantum limit are crucial for quantum information systems and ultrasensitive quantum measurements.However, the existing techniques have a limited gain-bandwidth product and only operate with weak input signals.Here, we demonstrate a two-port optomechanical scheme for amplification and routing of microwave signals, a system that simultaneously performs high-gain amplification and frequency conversion in the quantum regime.Our amplifier, implemented in a two-cavity microwave optomechanical device, shows 41 dB of gain and has a high dynamic range, handling input signals up to 10 13 photons per second, 3 orders of magnitude more than corresponding Josephson parametric amplifiers.We show that although the active medium, the mechanical resonator, is at a high temperature far from the quantum limit, only 4.6 quanta of noise is added to the input signal.Our method can be readily applied to a wide variety of optomechanical systems, including hybrid optical-microwave systems, creating a universal hub for signals at the quantum level.
Molecular optomechanical cavities have recently emerged as a promising platform for frequency upconversion, enabling the quantum coherent conversion of infrared signal into the visible range. In a recent work [F. Zou et al., Phys. Rev. Lett. 132, 153602 (2024)], we proposed an amplification mechanism that can enhance the intensity of the upconverted infrared signals by a factor of 1000 or more within such a cavity under the ideal case without any noise. In this work, we employ the power spectrum method to investigate the noise added to the upconverted signal in a molecular optomechanical cavity along with the conversion efficiency from infrared signal into visible range. In the red-detuned regime, the anti-Stokes sideband achieves superior conversion efficiency relative to the Stokes sideband. Conversely, the Stokes sideband dominates under the blue-detuned condition, which amplifies the infrared signal. We further demonstrate the dependence of the added noise on the coupling strength and decay rates of the system. In particular, we find that when the infrared signal is amplified, the added noise approaches the quantum limit of one quantum.
We present a novel device for the efficient, low-noise down-conversion of low-power light from the red visible spectrum. It can be applied to interface electronic spin-qubits in nitrogen-vacancy centers in diamond to the telecommunication wavelengths and thus offers the possibility to implement large-scale quantum networks in existing fiber infrastructure. In comparison to state-of-the-art frequency converters for this application, the device presented here generates an overall noise rate, which is one order of magnitude better than current record values. Simultaneously, an internal conversion efficiency of 50 % was measured. Furthermore, the converter serves as a feasibility demonstration of a general concept for the down-conversion of light from the sub-micron spectral range to telecommunication wavelengths.
Quantum networks enable a broad range of practical and fundamental applications. Experimental realization of such networks is hampered by many challenges, one of them being a lack of an efficient interface between stationary and flying qubits working at room temperature. We demonstrate an interface between ensembles of the nitrogen-vacancy centers in diamond and photons with wavelengths near 1550 nm. Photons are coupled to spins via local dynamical stress produced by optomechanical driving of a diamond microdisk. Our approach does not involve intrinsic optical transitions and can be easily adapted to many other colour centers.
Coherent interfaces between optical photons and mechanical excitations provide a promising route towards phonon-state engineering and hybrid quantum information processing. Cavity optomechanical systems enable such interfaces via optomechanically induced transparency (OMIT), allowing coherent mapping between traveling optical fields and localized mechanical modes. However, previous implementations of OMIT conversion protocols were limited to classical input signals with large coherent state photon numbers due to room temperature operation and corresponding thermal mechanical noise. Here, we demonstrate efficient low-noise photon-phonon state transfer close to the single-quantum regime in an optomechanical crystal operated at Millikelvin temperatures. Using weak coherent optical input pulses at the few-photon level, we achieve a record-level photon-phonon conversion efficiency of η=0.76η=0.76η=0.76, a mechanical storage lifetime of T1=7.3 μsT_\mathrm{1}=7.3~μsT1​=7.3 μs, and a tunable conversion bandwidth exceeding 4.5 MHz. Hanbury Brown-Twiss measurements of the retrieved signal demonstrate the coherent nature of the converted phononic state, evidencing low added thermal noise in the conversion process (nth=9.0n_\mathrm{th}=9.0nth​=9.0). These results establish optomechanical crystals as efficient optical interfaces to GHz mechanical modes and provide a pathway toward deterministic single-quantum-level mechanical state preparation.