Challenges
Datasets
Workspaces
Papers
Discussions
Leaderboard
Log inSign up
Challenges
Datasets
Workspaces
Papers
Discussions
Leaderboard
Blog
Job Board
Q3AS

© 2026 Aqora Quantum S.A.S.

TermsPrivacyLegal Notice

arXiv:1902.06569 · npj Quantum Information

Scalable quantum computer with superconducting circuits in the ultrastrong coupling regime

Roberto Stassi, Mauro Cirio, Franco Nori

Published Aug 6, 2020• 84 citations
arXivHTMLPDF

Abstract

Abstract So far, superconducting quantum computers have certain constraints on qubit connectivity, such as nearest-neighbor couplings. To overcome this limitation, we propose a scalable architecture to simultaneously connect several pairs of distant qubits via a dispersively coupled quantum bus. The building block of the bus is composed of orthogonal coplanar waveguide resonators connected through ancillary flux qubits working in the ultrastrong coupling regime. This regime activates virtual processes that boost the effective qubit–qubit interaction, which results in quantum gates on the nanosecond timescale. The interaction is switchable and preserves the coherence of the qubits.

DOI
10.1038/s41534-020-00294-x

Related papers

Fast Tunable Coupler for Superconducting Qubits

Radoslaw C. Bialczak, M. Ansmann, M. Hofheinz +11 more

A major challenge in the field of quantum computing is the construction of scalable qubit coupling architectures. Here, we demonstrate a novel tunable coupling circuit that allows superconducting qubits to be coupled over long distances. We show that the interqubit coupling strength can be arbitrarily tuned over nanosecond time scales within a sequence that mimics actual use in an algorithm. The coupler has a measured on/off ratio of 1000. The design is self-contained and physically separate from the qubits, allowing the coupler to be used as a module to connect a variety of elements such as qubits, resonators, amplifiers, and readout circuitry over distances much larger than nearest-neighbor. Such design flexibility is likely to be useful for a scalable quantum computer.

arXiv:1007.2219•Physical Review Letters•Feb 9, 2011•129 citations

Multi-Mode Bus Coupling Architecture of Superconducting Quantum Processor

Changhao Zhao, Yongcheng He, Geng Xiao +4 more

Abstract Resonators in circuit quantum electrodynamics systems naturally carry multiple modes, which may have non-negligible influence on qubit parameters and device performance. While new theories and techniques are under investigation to deal with the multi-mode effects in circuit quantum electrodynamics systems, novel engineering designs are also proposed featuring multi-mode resonators to achieve enhanced functionalities of superconducting quantum processors. In this work, multi-mode bus coupling architecture is proposed, in which superconducting qubits are coupled to multiple bus resonators to gain larger coupling strength. Application of multi-mode bus coupler can help improve iSWAP gate fidelity and gate speed beyond the limit of single-mode scenario. The proposed multi-mode bus coupling architecture is compatible with a scalable variation of the traditional bus coupling architecture. It opens up new possibilities for realization of scalable superconducting quantum computation with circuit quantum electrodynamics systems.

Chinese Physics Letters•Dec 6, 2022•4 citations

Engineering cross resonance interaction in multi-modal quantum circuits

Sumeru Hazra, Kishor V. Salunkhe, Anirban Bhattacharjee +5 more

The existing scalable superconducting quantum processors have only nearest-neighbor coupling. This leads to a reduced circuit depth, requiring a large series of gates to perform an arbitrary unitary operation in such systems. Recently, multi-modal devices have been demonstrated as a promising candidate for small quantum processor units. Always on longitudinal coupling in such circuits leads to implementation of native high fidelity multi-qubit gates. We propose an architecture using such devices as building blocks for a highly connected larger quantum circuit. To demonstrate a quantum operation between such blocks, a standard transmon is coupled to the multi-modal circuit using a 3D bus cavity giving rise to small exchange interaction between the transmon and one of the modes. We study the cross-resonance interaction in such systems and characterize the entangling operation and the unitary imperfections and crosstalk as a function of device parameters. Finally, we tune up the cross-resonance drive to implement multi-qubit gates in this architecture.

arXiv:1912.10953•Applied Physics Letters•Apr 13, 2020•12 citations

Tailoring Tunable Interactions in Superconducting Circuits Using Many to No Modes

Gihwan Kim

Tunable couplings are a central requirement for scalable quantum processing with superconducting quantum circuits. Practical quantum processors must dynamically reconfigure their interaction landscape to accommodate different quantum operations, including idle, single-qubit gates, two-qubit gates, readout, and reset, while maintaining high coherence and suppressing spurious couplings. While widely used tunable interaction approaches rely on single-mode mediation, they are often constrained by nearest-neighbor connectivity, limited on-off ratios, and stringent requirements on qubit frequency allocation. This thesis develops and studies novel strategies for tailoring tunable interactions by moving beyond single-mode mediation, spanning multimode engineered interactions and modeless interaction schemes ("many to no modes"), while accounting for realistic constraints in superconducting hardware. Using a microwave metamaterial waveguide realized by coupled resonator arrays, I demonstrate tunable dissipative interactions that allow on-demand, fast, and high switching-ratio photon emission from a transmon used as a multi-level quantum emitter. This capability is leveraged to achieve deterministic generation of multidimensional photonic cluster states, as well as unconditional reset and leakage reduction of frequency-tunable superconducting qubits. Complementary to these multimode dissipative tunable interactions, this thesis also introduces architectures that realize tunable interactions mediated by many coherent modes or by no mediating modes. I discuss a long-range interaction scheme between superconducting dual-rail qubits mediated by spatially extended eigenmodes of a coupled-resonator array bus. Finally, I propose and analyze a novel modeless coupling architecture based on a SQUID coupler which provides intrinsic cross-Kerr interactions, enabling fast, hybridization-free CZ gates for far-detuned pairs, and discuss its implications for miniaturization of superconducting quantum processors.

•May 1, 2026•0 citations

Switchable Ultrastrong Coupling in Circuit QED

Borja Peropadre, P. Forn-Díaz, E. Solano +1 more

We propose different designs of switchable coupling between a superconducting flux qubit and a microwave transmission line. They are based on two or more loops of Josephson junctions which are directly connected to a closed (cavity) or open transmission line. In both cases the circuit induces a coupling that can be modulated in strength, reaching the so-called ultrastrong coupling regime in which the coupling is comparable to the qubit and photon frequencies. Furthermore, we suggest a wide set of applications for the introduced architectures.

arXiv:0912.3456•Physical Review Letters•Jul 6, 2010•184 citations

Ring-Resonator-Based Coupling Architecture for Enhanced Connectivity in a Superconducting Multiqubit Network

Sumeru Hazra, Anirban Bhattacharjee, Madhavi Chand +4 more

Qubit coherence and gate fidelity are typically considered the two most useful metrics for characterizing a quantum processor. An equally useful metric is interqubit connectivity as it minimizes gate count and allows implementing algorithms efficiently with reduced error. However, interqubit connectivity in superconducting processors tends to be limited to nearest neighbor due to practical constraints in typical planar realizations. Here, we introduce a superconducting architecture that uses a ring resonator as a multiqubit coupling element to provide beyond nearest-neighbor connectivity without compromising on coupling uniformity or introducing fabrication complexities. We theoretically analyze the interqubit coupling as a function of frequency for a pair of qubits placed at different positions along the ring resonator and show that for carefully chosen operating frequency and angular spacing between the qubits, the variation of coupling can be minimized. For an operating frequency between the first two resonances of the ring resonator and a ${30}^{\ensuremath{\circ}}$ angular spacing for qubits, we compute interqubit coupling for a device capable of supporting up to 12 qubits with each qubit connected to nine other qubits. Using four qubits positioned strategically in the ring-resonator coupler, we experimentally verify the theoretical prediction for all possible angular spacings between the two qubits and demonstrate good agreement. Just like the standard bus resonator coupler, the coupling in the ring-resonator coupler is mediated via virtual photons since the operating frequency is far away from the resonant modes of the ring coupler. This ensures that any small internal loss in the ring resonator does not introduce decoherence during the coupling operation. We also compute extensions of this idea involving larger ring resonators and a multiring system and show the possibility of highly connected networks with larger number of qubits. Apart from being plug and play for existing superconducting architectures, our concept is scalable, adaptable to other platforms and has the potential to significantly accelerate progress in quantum computing, annealing, simulations, and error correction.

arXiv:2012.09463•Physical Review Applied•Aug 11, 2021•38 citations
Abstract So far, superconducting quantum computers have certain constraints on qubit connectivity, such as nearest-neighbor couplings. To overcome this limitation, we propose a scalable architecture to simultaneously connect several pairs of distant qubits via a dispersively coupled quantum bus. The building block of the bus is composed of orthogonal coplanar waveguide resonators connected through ancillary flux qubits working in the ultrastrong coupling regime. This regime activates virtual processes that boost the effective qubit–qubit interaction, which results in quantum gates on the nanosecond timescale. The interaction is switchable and preserves the coherence of the qubits.
A major challenge in the field of quantum computing is the construction of scalable qubit coupling architectures. Here, we demonstrate a novel tunable coupling circuit that allows superconducting qubits to be coupled over long distances. We show that the interqubit coupling strength can be arbitrarily tuned over nanosecond time scales within a sequence that mimics actual use in an algorithm. The coupler has a measured on/off ratio of 1000. The design is self-contained and physically separate from the qubits, allowing the coupler to be used as a module to connect a variety of elements such as qubits, resonators, amplifiers, and readout circuitry over distances much larger than nearest-neighbor. Such design flexibility is likely to be useful for a scalable quantum computer.
Abstract Resonators in circuit quantum electrodynamics systems naturally carry multiple modes, which may have non-negligible influence on qubit parameters and device performance. While new theories and techniques are under investigation to deal with the multi-mode effects in circuit quantum electrodynamics systems, novel engineering designs are also proposed featuring multi-mode resonators to achieve enhanced functionalities of superconducting quantum processors. In this work, multi-mode bus coupling architecture is proposed, in which superconducting qubits are coupled to multiple bus resonators to gain larger coupling strength. Application of multi-mode bus coupler can help improve iSWAP gate fidelity and gate speed beyond the limit of single-mode scenario. The proposed multi-mode bus coupling architecture is compatible with a scalable variation of the traditional bus coupling architecture. It opens up new possibilities for realization of scalable superconducting quantum computation with circuit quantum electrodynamics systems.
The existing scalable superconducting quantum processors have only nearest-neighbor coupling. This leads to a reduced circuit depth, requiring a large series of gates to perform an arbitrary unitary operation in such systems. Recently, multi-modal devices have been demonstrated as a promising candidate for small quantum processor units. Always on longitudinal coupling in such circuits leads to implementation of native high fidelity multi-qubit gates. We propose an architecture using such devices as building blocks for a highly connected larger quantum circuit. To demonstrate a quantum operation between such blocks, a standard transmon is coupled to the multi-modal circuit using a 3D bus cavity giving rise to small exchange interaction between the transmon and one of the modes. We study the cross-resonance interaction in such systems and characterize the entangling operation and the unitary imperfections and crosstalk as a function of device parameters. Finally, we tune up the cross-resonance drive to implement multi-qubit gates in this architecture.
Tunable couplings are a central requirement for scalable quantum processing with superconducting quantum circuits. Practical quantum processors must dynamically reconfigure their interaction landscape to accommodate different quantum operations, including idle, single-qubit gates, two-qubit gates, readout, and reset, while maintaining high coherence and suppressing spurious couplings. While widely used tunable interaction approaches rely on single-mode mediation, they are often constrained by nearest-neighbor connectivity, limited on-off ratios, and stringent requirements on qubit frequency allocation. This thesis develops and studies novel strategies for tailoring tunable interactions by moving beyond single-mode mediation, spanning multimode engineered interactions and modeless interaction schemes ("many to no modes"), while accounting for realistic constraints in superconducting hardware. Using a microwave metamaterial waveguide realized by coupled resonator arrays, I demonstrate tunable dissipative interactions that allow on-demand, fast, and high switching-ratio photon emission from a transmon used as a multi-level quantum emitter. This capability is leveraged to achieve deterministic generation of multidimensional photonic cluster states, as well as unconditional reset and leakage reduction of frequency-tunable superconducting qubits. Complementary to these multimode dissipative tunable interactions, this thesis also introduces architectures that realize tunable interactions mediated by many coherent modes or by no mediating modes. I discuss a long-range interaction scheme between superconducting dual-rail qubits mediated by spatially extended eigenmodes of a coupled-resonator array bus. Finally, I propose and analyze a novel modeless coupling architecture based on a SQUID coupler which provides intrinsic cross-Kerr interactions, enabling fast, hybridization-free CZ gates for far-detuned pairs, and discuss its implications for miniaturization of superconducting quantum processors.
We propose different designs of switchable coupling between a superconducting flux qubit and a microwave transmission line. They are based on two or more loops of Josephson junctions which are directly connected to a closed (cavity) or open transmission line. In both cases the circuit induces a coupling that can be modulated in strength, reaching the so-called ultrastrong coupling regime in which the coupling is comparable to the qubit and photon frequencies. Furthermore, we suggest a wide set of applications for the introduced architectures.
Qubit coherence and gate fidelity are typically considered the two most useful metrics for characterizing a quantum processor. An equally useful metric is interqubit connectivity as it minimizes gate count and allows implementing algorithms efficiently with reduced error. However, interqubit connectivity in superconducting processors tends to be limited to nearest neighbor due to practical constraints in typical planar realizations. Here, we introduce a superconducting architecture that uses a ring resonator as a multiqubit coupling element to provide beyond nearest-neighbor connectivity without compromising on coupling uniformity or introducing fabrication complexities. We theoretically analyze the interqubit coupling as a function of frequency for a pair of qubits placed at different positions along the ring resonator and show that for carefully chosen operating frequency and angular spacing between the qubits, the variation of coupling can be minimized. For an operating frequency between the first two resonances of the ring resonator and a ${30}^{\ensuremath{\circ}}$ angular spacing for qubits, we compute interqubit coupling for a device capable of supporting up to 12 qubits with each qubit connected to nine other qubits. Using four qubits positioned strategically in the ring-resonator coupler, we experimentally verify the theoretical prediction for all possible angular spacings between the two qubits and demonstrate good agreement. Just like the standard bus resonator coupler, the coupling in the ring-resonator coupler is mediated via virtual photons since the operating frequency is far away from the resonant modes of the ring coupler. This ensures that any small internal loss in the ring resonator does not introduce decoherence during the coupling operation. We also compute extensions of this idea involving larger ring resonators and a multiring system and show the possibility of highly connected networks with larger number of qubits. Apart from being plug and play for existing superconducting architectures, our concept is scalable, adaptable to other platforms and has the potential to significantly accelerate progress in quantum computing, annealing, simulations, and error correction.