Sources of pure and indistinguishable single-photons are critical for near-future optical quantum technologies. Recently, color centers hosted by two-dimensional hexagonal boron nitride (hBN) have emerged as a promising platform for high luminosity room temperature single-photon sources. Despite the brightness of the emitters, the spectrum is rather broad and the single-photon purity is not sufficient for practical quantum information processing. Here, we report integration of such a quantum emitter hosted by hBN into a tunable optical microcavity. A small mode volume of the order of λ 3 allows us to Purcell enhance the fluorescence, with the observed excited state lifetime shortening. The cavity significantly narrows the spectrum and improves the single-photon purity by suppression of off-resonant noise. The complete device, including all optics, driving electronics, and control units, is compact and integrated in a small volume of 10 × 10 × 10 cm 3, allowing for portable usage in mobile applications.
Sources of pure and indistinguishable single-photons are critical for near-future optical quantum technologies. Recently, color centers hosted by two-dimensional hexagonal boron nitride (hBN) have emerged as a promising platform for high luminosity room temperature single-photon sources. Despite the brightness of the emitters, the spectrum is rather broad and the single-photon purity is not sufficient for practical quantum information processing. Here, we report integration of such a quantum emitter hosted by hBN into a tunable optical microcavity. A small mode volume of the order of λ 3 allows us to Purcell enhance the fluorescence, with the observed excited state lifetime shortening. The cavity significantly narrows the spectrum and improves the single-photon purity by suppression of off-resonant noise. The complete device, including all optics, driving electronics, and control units, is compact and integrated in a small volume of 10 × 10 × 10 cm 3, allowing for portable usage in mobile applications.
Single photons are the key ingredient for many photonic quantum technologies including quantum key distribution and measurement-based quantum computing. However, it remains difficult to create devices with the appropriate specifications for use in non-laboratory environments. The optical microcavity platform provides an attractive route towards a room temperature single photon source device. Our ultra-small focused ion beam (FIB) milled open-access cavities offer enhancement of the spontaneous emission rate, tunability of the emission spectrum and increased light collection. The embedment of solid-state emitters within these cavities enables us to create a robust room temperature single photon source device, with the potential for high efficiencies and single photon purities. Defects such as the nitrogen-vacancy (NV) centre in diamond have been shown to be stable room-temperature sources of single photons. There are new single emitters emerging in two-dimensional materials such as hexagonal boron nitride (hBN). Here we present developments in room-temperature coupling of single defects to open-access microcavities of a planar-hemispherical geometry with mode volumes down to λ3. We report enhancements in the spectral density of photons into a single cavity mode, combined with improved single photon purities. It will be shown that the NV-cavity system provides a ~3% single photon emission efficiency with purities of up to 94%. The hBN-cavity system provides count rates >1Mcts/s into a single cavity mode with purities up to 96%. With these high single photon purities, such devices would be robust against photon number splitting attacks making them attractive for applications in quantum cryptography.
Room temperature solid-state emitters provide a promising source of single photons for use in quantum technologies. The emitters studied in this thesis are the nitrogen-vacancy (NV) centre in diamond, and defects in two-dimensional hexagonal boron nitride (hBN). In this thesis, I present investigations into the coupling of these defects to open-access microcavities at room temperature. The optical microcavity serves to confine the electric field down to mode volumes on the order of λ3, increasing the spontaneous emission rate of these emitters and channelling this emission into well defined cavity modes. The general properties of both emitters will be presented, including examples of single photon emission, emission spectra, saturation behaviour and photo-stability. A few examples highlighting the long-term photo-stability of the NV centre under pulsed excitation will be displayed. This will highlight the suitability of the NV centre for a practical device. Following the preparation and characterisation of each emitter, single photon emission into the cavity modes is verified, reaching single photon purities greater than 97%. Enhancements in the spectral density of photons were observed for both the NV centre (~25×) and defect in hBN (~3×), along with decreases in the excited state lifetimes. While the NV centre provides a stable source of single photons, the cavity enhancement is limited by its broad emission spectrum. Defects in hBN present near-ideal optical properties in the absence of the cavity, and were expected to deliver superior results within the cavity. However, the poor photo-stability of these defects did not allow complete characterisation of the cavity coupled emission. FDTD simulations were combined with changes in the excited state lifetime to infer the quantum efficiency of these defects. The results of this thesis form the foundation for the realisation of a robust room temperature single photon source.
Quantum theory is the foundation of modern physics.Some of its basic principles, such as Born's rule, however, are based on postulates which require experimental testing.Any deviation from Born's rule would result in higher-order interference and can thus be tested in an experiment.Here, we report on such a test with a quantum light source based on a color center in hexagonal boron nitride (hBN) coupled to a microcavity.Our room-temperature photon source features a narrow-linewidth, high-efficiency, high-purity, and on-demand single-photon generation.With the single-photon source we can increase the interferometric sensitivity of our three-path interferometer compared to conventional laser-based light sources by fully suppressing the detector nonlinearity.We thereby obtain a tight bound on the third-order interference term of 3.96(523) × 10 -4 .We also measure an interference visibility of 98.58% for our single photons emitted from hBN at room temperature, which provides a promising route for using the hBN platform as light source for phase-encoding schemes in quantum key distribution.
Hexagonal boron nitride (hBN) is known as a promising solid-state platform to host room temperature quantum emitters that produce high purity single photons. The bright and spectrally adaptable hBN emitters are space-compatible, making hBN well-suited for satellite-based free-space optical (FSO) quantum key distribution (QKD) at wavelengths where the atmospheric background is naturally suppressed. This paper presents a pathway to develop hBN emitters operating near the Ca-II Fraunhofer line (at 854 nm), enabling daylight FSO operation. Moreover, due to its compatibility with the first telecommunication window at 850 nm, it is possible to interface with optical fibers to bridge the `last mile' in a scenario where multiple end-users connect through a single optical ground station to a QKD satellite. We therefore introduce a concept that combines continuous operation of a quantum network, hybrid links to minimize deployment costs, and high data rates due to the use of realistic single photon sources. The realization would be an important milestone for the development of the quantum internet.
Single-photon sources are crucial components for building quantum networks and communications, but their optical coherent control remains a significant challenge in the development of quantum technologies. Recently, single-photon sources in atomically thin 2D materials such as transition metal dichalcogenides and van der Waals materials have emerged as promising solid-state quantum light emitters [1]. Hexagonal boron nitride (hBN) is a 2D insulator, which hosts optically active states in its band gap that efficiently emit single photons even at room temperature. The wide range of emission wavelengths, narrow emission lines, and convenient tunability of these hBN emitters make them particularly interesting for quantum sensing and wavelength division multiplexed quantum communications. They can also be found in commercially available nanocrystals, making them ideal for creating large arrays of single-photon emitters [2] and efficient coupling to photonic structures, such as 3D-printed microlenses [3].
Single-photon sources that are bright, pure, and interference-ready are essential for quantum communication and photonic quantum information processing, but many solid-state platforms still rely on bulky optical excitation, careful alignment, and post-selection to achieve useful linewidth, stability, and brightness. Scalable quantum photonics instead requires turnkey quantum-light engines that can be triggered on demand, stabilized against environmental noise, and efficiently interfaced with fibers or photonic circuits. This review surveys recent progress in electronic and photonic integration of single quantum emitters in two-dimensional materials, focusing on localized excitonic emitters in transition metal dichalcogenides and defect-based color centers in hexagonal boron nitride. On the electronic side, we discuss electrical injection, fast modulation, electrostatic stabilization, and Stark tunability as routes to suppress blinking, spectral wandering, and charge-noise-induced broadening. On the photonic side, we review waveguide and resonator platforms that funnel emission into well-defined optical modes and, in some cases, enhance radiative rates through the Purcell effect. We connect these integration strategies to key source metrics, including single-photon purity, brightness, spectral stability, and photon indistinguishability. We conclude that the next stage of progress will depend on co-designed electronic and photonic architectures that jointly optimize on-demand operation, stabilization, tunability, and packaging-compatible optical interfacing.