Challenges
Datasets
Workspaces
Papers
Discussions
Leaderboard
Log inSign up
Challenges
Datasets
Workspaces
Papers
Discussions
Leaderboard
Blog
Job Board
Q3AS

© 2026 Aqora Quantum S.A.S.

TermsPrivacyLegal Notice

arXiv:1901.08312 · New Journal of Physics

Transport signatures of a Majorana qubit and read-out-induced dephasing

Lupei Qin, Xin-Qi Li, Alexander Shnirman, Gerd Schön

Published Mar 28, 2019• 13 citations
arXivHTMLPDF

Abstract

Motivated by recent proposals of Majorana qubits and the read-out of their quantum state we investigate a qubit setup formed by two parallel topological wires shunted by a superconducting bridge. The wires are further coupled to two quantum dots, which are also linked directly, thus creating an interference loop. The transport current through this system shows an interference pattern which distinguishes two basis states of the qubit in a QND measurement. We analyze various properties of the interference current and the read-out process, including the resulting dephasing and relaxation. We also analyze the effects of varying control parameters such as gate voltages on the current. The characteristic dependencies may serve as a signature of Majorana bound states.

DOI
10.1088/1367-2630/ab1431

Related papers

Four-Majorana qubit with charge readout: Dynamics and decoherence

Tommy Li, W. A. Coish, Michael Hell +2 more

We present a theoretical analysis of a Majorana-based qubit consisting of two topological superconducting islands connected via a Josephson junction. The qubit is operated by electrostatic gates which control the coupling of two of the four Majorana zero modes. At the end of the operation, readout is performed in the charge basis. Even though the operations are not topologically protected, the proposed experiment can potentially shed light on the coherence of the parity degree of freedom in Majorana devices and serve as a first step towards topological Majorana qubits. We discuss in detail the charge-stability diagram and its use for characterizing the parameters of the devices, including the overlap of the Majorana edge states. We describe the multilevel spectral properties of the system and present a detailed study of its controlled coherent oscillations, as well as decoherence resulting from coupling to a non-Markovian environment. In particular, we study a gate-controlled protocol where conversion between Coulomb-blockade and transmon regimes generates coherent oscillations of the qubit state due to the overlap of Majorana modes. We show that, in addition to fluctuations of the Majorana coupling, considerable measurement errors may be accumulated during the conversion intervals when electrostatic fluctuations in the superconducting islands are present. These results are also relevant for several proposed implementations of topological qubits which rely on readout based on charge detection.

arXiv:1807.05839•Physical review. B./Physical review. B•Nov 5, 2018•24 citations

Dephasing and leakage dynamics of noisy Majorana-based qubits: Topological versus Andreev

Ryan V. Mishmash, Bela Bauer, Felix von Oppen +1 more

Topological quantum computation encodes quantum information nonlocally by nucleating non-Abelian anyons separated by distances $L$, typically spanning the qubit device size. This nonlocality renders topological qubits exponentially immune to dephasing from all sources of classical noise with operator support local on the scale of $L$. We perform detailed analytical and numerical analyses of a time-domain Ramsey-type protocol for noisy Majorana-based qubits that is designed to validate this coveted topological protection in near-term devices such as the so-called ``tetron'' design. By assessing dependence of dephasing times on tunable parameters, e.g., magnetic field, our proposed protocol can clearly distinguish a bona fide Majorana qubit from one constructed from semilocal Andreev bound states, which can otherwise closely mimic the true topological scenario in local probes. In addition, we analyze leakage of the qubit out of its low-energy manifold due to classical-noise-induced generation of quasiparticle excitations; leakage limits the qubit lifetime when the bulk gap collapses, and hence our protocol further reveals the onset of a topological phase transition. This experiment requires measurement of two nearby Majorana modes for both initialization and readout---achievable, for example, by tunnel coupling to a nearby quantum dot---but no further Majorana manipulations, and thus constitutes an enticing prebraiding experiment. Along the way, we address conceptual subtleties encountered when discussing dephasing and leakage in the context of Majorana qubits.

arXiv:1911.02582•Physical review. B./Physical review. B•Feb 3, 2020•42 citations

From quantum transport in semiconducting nanowires to hybrid semiconducting-superconducting qubits

Azarin Zarassi

A practical quantum computer demands a physical quantum bit (qubit) that is scalable, has a well-defined initial state, and brings together coherence with reliable control and read-out. A compelling idea is to put together a locally protected Majorana qubit with a superconducting qubit. The superconducting qubit is used to read out the Majorana states while the Majorana qubit may act as a quantum memory. This thesis presents a series of studies on quantum transport in semiconducting nanowires coupled to superconductors to investigate various platforms for realizing Majorana. These studies are followed by microwave measurements on superconducting circuits compatible with semiconducting-superconducting heterostructures. We first evaluate the potential of Ge/Si core/shell nanowires by achieving induced superconductivity as well as estimating spin-orbit coupling. Next we explore the transport mediated by Andreev bound states formed in InSb nanowire quantum. A subgap negative differential conductance is investigated together with the coalescing Andreev resonances at zero bias relevant for the correct interpretation of Majorana experiments done on the same structures. We conclude our studies of semiconducting nanowires by exploring tunnel junctions in Sn-InSb nanowires that are prepared by in-situ shadowing using nearby nanowires and flakes. Tin shells are found to induce a hard superconducting gap persisting up to high magnetic fields. We observe the two-electron charging effect from a small superconducting island of Sn-InSb. This effect is attributed to charge parity stability, which makes this nanowire system an intriguing candidate for superconducting and topological quantum circuits. These Sn-InSb junctions are then used as the nonlinear element in a transmon qubit design where we observe a dispersive coupling between this nanowire Josephson junction and a superconducting resonator. We also present our progress towards building a magnetic field resilient superconducting circuit that allows integration with semiconducting and topological structures. In the last chapter, InSb semiconducting nanowires are utilized as shadow masks prior to superconductor deposition on an InAs quantum well. We study Josephson current properties in Josephson junctions made from these nanowire shadows. Our results point to highly transparent junctions that can be developed further for hybrid superconductor-semiconductor qubit systems.

•Jan 20, 2021•3 citations

Quantifying Majorana-qubit stability through parity-resolved Rabi dynamics

Yingxin Zhang, Jiayi Chen, Jie Liu +1 more

Evaluating the stability of Majorana qubits (MQs) is a central challenge for topological quantum computation. Here we propose a simple and experimentally accessible protocol to quantify MQ stability by coupling a quantum dot (QD) to an MQ, which induces Rabi oscillations in the QD charge occupation that can be directly detected using recently developed single-shot readout techniques. In realistic systems, deviations from ideal MQ behavior lead to a characteristic beating pattern in the Rabi dynamics. We show that the beating frequency scales linearly with these deviations while remaining independent of the base Rabi frequency, thereby providing a direct and quantitative measure of MQ stability. Importantly, the beating signature is robust against weak dissipation, and we further demonstrate that the effective model remains quantitatively accurate when benchmarked against a realistic minimal Kitaev chain. Our results establish a practical and scalable route for quantitatively characterizing Majorana qubit stability in current experimental platforms.

arXiv:2502.09062•Physical review. B./Physical review. B•Oct 30, 2026•0 citations

Double-dot interferometer for quantum measurement of Majorana qubits and stabilizers*

Kai Zhou, Cheng Zhang, Lupei Qin +1 more

Motivated by the need of quantum measurement of Majorana qubits and surface-code stabilizers, we analyze the performance of a double-dot interferometer under the influence of environment noise. The double-dot setup design allows accounting for the full multiple tunneling process between the dots through the Majorana island, within a master equation approach. In the co-tunneling regime, which results in a Majorana-mediated effective coupling between the dots, the master equation approach allows us to obtain analytic solutions for the measurement currents. The measurement quality, characterized by figures of merit such as the visibility of measurement signals, is carried out in regard to the unusual decoherence effect rather than ‘which-path’ dephasing. The results obtained in this work are expected to be useful for future experiments of Majorana qubit and stabilizer measurements.

arXiv:2002.06317•Chinese Physics B•Oct 28, 2020•3 citations

Readout of Majorana parity states using a quantum dot

Kaveh Gharavi, Darryl Hoving, Jonathan Baugh

We theoretically examine a scheme for projectively reading out the parity state of a pair of Majorana bound states (MBSs) using a tunnel-coupled quantum dot. The dot is coupled to one end of the topological wire but isolated from any reservoir and is capacitively coupled to a charge sensor for measurement. The combined parity of the MBS-dot system is conserved, and charge transfer between the MBS and dot only occurs through resonant tunneling. Resonance is controlled by the dot potential through a local gate and by the MBS energy splitting due to the overlap of the MBS pair wave functions. The latter splitting can be tuned from zero (topologically protected regime) to a finite value by gate-driven shortening of the topological wire. Simulations show that the oscillatory nature of the MBS splitting is not a fundamental obstacle to readout but requires precise gate control of the MBS spatial position and dot potential. With experimentally realistic parameters, we find that high-fidelity parity readout is achievable given nanometer-scale spatial control of the MBS and that there is a trade-off between required precisions of temporal and spatial control. Use of the scheme to measure the MBS splitting versus separation would present a clear signature of topological order and could be used to test the robustness of this order to spatial motion, a key requirement in certain schemes for scalable topological qubits. We show how the scheme can be extended to distinguish valid parity measurements from invalid ones due to gate calibration errors.

arXiv:1601.07506•Physical review. B./Physical review. B•Oct 12, 2016•41 citations
Motivated by recent proposals of Majorana qubits and the read-out of their quantum state we investigate a qubit setup formed by two parallel topological wires shunted by a superconducting bridge. The wires are further coupled to two quantum dots, which are also linked directly, thus creating an interference loop. The transport current through this system shows an interference pattern which distinguishes two basis states of the qubit in a QND measurement. We analyze various properties of the interference current and the read-out process, including the resulting dephasing and relaxation. We also analyze the effects of varying control parameters such as gate voltages on the current. The characteristic dependencies may serve as a signature of Majorana bound states.
We present a theoretical analysis of a Majorana-based qubit consisting of two topological superconducting islands connected via a Josephson junction. The qubit is operated by electrostatic gates which control the coupling of two of the four Majorana zero modes. At the end of the operation, readout is performed in the charge basis. Even though the operations are not topologically protected, the proposed experiment can potentially shed light on the coherence of the parity degree of freedom in Majorana devices and serve as a first step towards topological Majorana qubits. We discuss in detail the charge-stability diagram and its use for characterizing the parameters of the devices, including the overlap of the Majorana edge states. We describe the multilevel spectral properties of the system and present a detailed study of its controlled coherent oscillations, as well as decoherence resulting from coupling to a non-Markovian environment. In particular, we study a gate-controlled protocol where conversion between Coulomb-blockade and transmon regimes generates coherent oscillations of the qubit state due to the overlap of Majorana modes. We show that, in addition to fluctuations of the Majorana coupling, considerable measurement errors may be accumulated during the conversion intervals when electrostatic fluctuations in the superconducting islands are present. These results are also relevant for several proposed implementations of topological qubits which rely on readout based on charge detection.
Topological quantum computation encodes quantum information nonlocally by nucleating non-Abelian anyons separated by distances LLL, typically spanning the qubit device size. This nonlocality renders topological qubits exponentially immune to dephasing from all sources of classical noise with operator support local on the scale of LLL. We perform detailed analytical and numerical analyses of a time-domain Ramsey-type protocol for noisy Majorana-based qubits that is designed to validate this coveted topological protection in near-term devices such as the so-called ``tetron'' design. By assessing dependence of dephasing times on tunable parameters, e.g., magnetic field, our proposed protocol can clearly distinguish a bona fide Majorana qubit from one constructed from semilocal Andreev bound states, which can otherwise closely mimic the true topological scenario in local probes. In addition, we analyze leakage of the qubit out of its low-energy manifold due to classical-noise-induced generation of quasiparticle excitations; leakage limits the qubit lifetime when the bulk gap collapses, and hence our protocol further reveals the onset of a topological phase transition. This experiment requires measurement of two nearby Majorana modes for both initialization and readout---achievable, for example, by tunnel coupling to a nearby quantum dot---but no further Majorana manipulations, and thus constitutes an enticing prebraiding experiment. Along the way, we address conceptual subtleties encountered when discussing dephasing and leakage in the context of Majorana qubits.
A practical quantum computer demands a physical quantum bit (qubit) that is scalable, has a well-defined initial state, and brings together coherence with reliable control and read-out. A compelling idea is to put together a locally protected Majorana qubit with a superconducting qubit. The superconducting qubit is used to read out the Majorana states while the Majorana qubit may act as a quantum memory. This thesis presents a series of studies on quantum transport in semiconducting nanowires coupled to superconductors to investigate various platforms for realizing Majorana. These studies are followed by microwave measurements on superconducting circuits compatible with semiconducting-superconducting heterostructures. We first evaluate the potential of Ge/Si core/shell nanowires by achieving induced superconductivity as well as estimating spin-orbit coupling. Next we explore the transport mediated by Andreev bound states formed in InSb nanowire quantum. A subgap negative differential conductance is investigated together with the coalescing Andreev resonances at zero bias relevant for the correct interpretation of Majorana experiments done on the same structures. We conclude our studies of semiconducting nanowires by exploring tunnel junctions in Sn-InSb nanowires that are prepared by in-situ shadowing using nearby nanowires and flakes. Tin shells are found to induce a hard superconducting gap persisting up to high magnetic fields. We observe the two-electron charging effect from a small superconducting island of Sn-InSb. This effect is attributed to charge parity stability, which makes this nanowire system an intriguing candidate for superconducting and topological quantum circuits. These Sn-InSb junctions are then used as the nonlinear element in a transmon qubit design where we observe a dispersive coupling between this nanowire Josephson junction and a superconducting resonator. We also present our progress towards building a magnetic field resilient superconducting circuit that allows integration with semiconducting and topological structures. In the last chapter, InSb semiconducting nanowires are utilized as shadow masks prior to superconductor deposition on an InAs quantum well. We study Josephson current properties in Josephson junctions made from these nanowire shadows. Our results point to highly transparent junctions that can be developed further for hybrid superconductor-semiconductor qubit systems.
Evaluating the stability of Majorana qubits (MQs) is a central challenge for topological quantum computation. Here we propose a simple and experimentally accessible protocol to quantify MQ stability by coupling a quantum dot (QD) to an MQ, which induces Rabi oscillations in the QD charge occupation that can be directly detected using recently developed single-shot readout techniques. In realistic systems, deviations from ideal MQ behavior lead to a characteristic beating pattern in the Rabi dynamics. We show that the beating frequency scales linearly with these deviations while remaining independent of the base Rabi frequency, thereby providing a direct and quantitative measure of MQ stability. Importantly, the beating signature is robust against weak dissipation, and we further demonstrate that the effective model remains quantitatively accurate when benchmarked against a realistic minimal Kitaev chain. Our results establish a practical and scalable route for quantitatively characterizing Majorana qubit stability in current experimental platforms.
Motivated by the need of quantum measurement of Majorana qubits and surface-code stabilizers, we analyze the performance of a double-dot interferometer under the influence of environment noise. The double-dot setup design allows accounting for the full multiple tunneling process between the dots through the Majorana island, within a master equation approach. In the co-tunneling regime, which results in a Majorana-mediated effective coupling between the dots, the master equation approach allows us to obtain analytic solutions for the measurement currents. The measurement quality, characterized by figures of merit such as the visibility of measurement signals, is carried out in regard to the unusual decoherence effect rather than ‘which-path’ dephasing. The results obtained in this work are expected to be useful for future experiments of Majorana qubit and stabilizer measurements.
We theoretically examine a scheme for projectively reading out the parity state of a pair of Majorana bound states (MBSs) using a tunnel-coupled quantum dot. The dot is coupled to one end of the topological wire but isolated from any reservoir and is capacitively coupled to a charge sensor for measurement. The combined parity of the MBS-dot system is conserved, and charge transfer between the MBS and dot only occurs through resonant tunneling. Resonance is controlled by the dot potential through a local gate and by the MBS energy splitting due to the overlap of the MBS pair wave functions. The latter splitting can be tuned from zero (topologically protected regime) to a finite value by gate-driven shortening of the topological wire. Simulations show that the oscillatory nature of the MBS splitting is not a fundamental obstacle to readout but requires precise gate control of the MBS spatial position and dot potential. With experimentally realistic parameters, we find that high-fidelity parity readout is achievable given nanometer-scale spatial control of the MBS and that there is a trade-off between required precisions of temporal and spatial control. Use of the scheme to measure the MBS splitting versus separation would present a clear signature of topological order and could be used to test the robustness of this order to spatial motion, a key requirement in certain schemes for scalable topological qubits. We show how the scheme can be extended to distinguish valid parity measurements from invalid ones due to gate calibration errors.