Challenges
Datasets
Workspaces
Papers
Discussions
Leaderboard
Log inSign up
Challenges
Datasets
Workspaces
Papers
Discussions
Leaderboard
Blog
Job Board
Q3AS

© 2026 Aqora Quantum S.A.S.

TermsPrivacyLegal Notice

arXiv:1812.05459 · Physical Review Applied

Optomechanical Microwave Amplification without Mechanical Amplification

Martijn A. Cohen, Daniel Bothner, Yaroslav M. Blanter, Gary Alexander Steele

Published Jan 16, 2020• 8 citations
arXivHTMLPDF

Abstract

High-gain and low-noise signal amplification is a valuable tool in various cryogenic microwave experiments. A microwave optomechanical device, in which a vibrating capacitor modulates the frequency of a microwave cavity, is one technique that is able to amplify microwave signals with high gain and large dynamical range. Such optomechanical amplifiers typically rely on strong backaction of microwave photons on the mechanical mode achieved in the sideband-resolved limit of optomechanics. Here, we observe microwave amplification in an optomechanical cavity in the extremely unresolved sideband limit. A large gain is observed for any detuning of the single pump tone within the cavity linewidth, a clear indication that the amplification is not induced by dynamical backaction. By being able to amplify for any detuning of the pump signal, the amplification center frequency can be tuned over the entire range of the broad cavity linewidth. Additionally, by providing microwave amplification without mechanical amplification, we predict that by using this scheme it is possible to achieve near-quantum-limited microwave amplification despite a large thermal occupation of the mechanical mode.

DOI
10.1103/physrevapplied.13.014028

Related papers

Low-Noise Amplification and Frequency Conversion with a Multiport Microwave Optomechanical Device

Caspar F. Ockeloen-Korppi, Erno Damskägg, J.-M. Pirkkalainen +3 more

High-gain amplifiers of electromagnetic signals operating near the quantum limit are crucial for quantum information systems and ultrasensitive quantum measurements.However, the existing techniques have a limited gain-bandwidth product and only operate with weak input signals.Here, we demonstrate a two-port optomechanical scheme for amplification and routing of microwave signals, a system that simultaneously performs high-gain amplification and frequency conversion in the quantum regime.Our amplifier, implemented in a two-cavity microwave optomechanical device, shows 41 dB of gain and has a high dynamic range, handling input signals up to 10 13 photons per second, 3 orders of magnitude more than corresponding Josephson parametric amplifiers.We show that although the active medium, the mechanical resonator, is at a high temperature far from the quantum limit, only 4.6 quanta of noise is added to the input signal.Our method can be readily applied to a wide variety of optomechanical systems, including hybrid optical-microwave systems, creating a universal hub for signals at the quantum level.

arXiv:1602.05779•Physical Review X•Oct 28, 2016•67 citations

Directional phase-sensitive amplifier between microwave and optical photons

Cheng Jiang, Lijia Song, Yong Li

We study the directional phase-sensitive amplification between microwave and optical photons in a triple-cavity optomechanical system consisting of three cavities and one mechanical resonator. When the microwave cavity is pumped on both red and blue sidebands but the directly coupled optical cavities are only pumped on the red sidebands, directional phase-sensitive amplification can be realized by tuning the effective optomechanical couplings and the coupling strength between the optical cavities. We show that both gain and bandwidth of the amplifier can be enhanced by increasing the optomechanical cooperativities, indicating an unlimited gain-bandwidth product. Meanwhile, the proposed phase-sensitive amplifier can approach the quantum limit of zero added noise in the large cooperativity limit.

Physical Review A•Feb 12, 2019•26 citations

Noiseless Quantum Measurement and Squeezing of Microwave Fields Utilizing Mechanical Vibrations

Caspar F. Ockeloen-Korppi, Erno Damskägg, J.-M. Pirkkalainen +3 more

A process which strongly amplifies both quadrature amplitudes of an oscillatory signal necessarily adds noise. Alternatively, if the information in one quadrature is lost in phase-sensitive amplification, it is possible to completely reconstruct the other quadrature. Here we demonstrate such a nearly perfect phase-sensitive measurement using a cavity optomechanical scheme, characterized by an extremely small noise less than 0.2 quanta. The device also strongly squeezes microwave radiation by 8 dB below vacuum. A source of bright squeezed microwaves opens up applications in manipulations of quantum systems, and noiseless amplification can be used even at modest cryogenic temperatures.

arXiv:1610.09980•Physical Review Letters•Mar 6, 2017•61 citations

Quantum-limited directional amplifier based on a triple-cavity optomechanical system

Cheng Jiang, Baowei Ji, Yuanshun Cui +3 more

We theoretically propose a scheme for realizing a quantum-limited directional amplifier in a triple-cavity optomechanical system, where one microwave cavity and two optical cavities are, respectively, coupled to a common mechanical resonator. Moreover, the two optical cavities are coupled directly to facilitate the directional amplification between microwave and optical photons. We find that directional amplification between the three cavity modes is achieved with two gain process and one conversion process, and the direction of amplification can be modulated by controlling the phase difference between the field-enhanced optomechanical coupling strengths. Furthermore, with increasing the optomechanical cooperativity, both gain and bandwidth of the directional amplifier can be enhanced, and the noise added to the amplifier can be suppressed to approach the standard quantum limit on the phase-preserving linear amplifier.

Optics Express•Jun 1, 2018•16 citations

Theory of phase-mixing amplification in an optomechanical system

Caspar F. Ockeloen-Korppi, Tero Tapio Heikkilä, Mika A. Sillanpää +1 more

Abstract The investigation of the ultimate limits imposed by quantum mechanics on amplification represents an important topic both on a fundamental level and from the perspective of potential applications. We discuss here a novel regime for bosonic linear amplifiers—beside phase-insensitive and phase-sensitive amplification—which we term here phase-mixing amplification. Furthermore, we show that phase-mixing amplification can be realised in a cavity optomechanical setup, constituted by a mechanical resonator which is dispersively coupled to an optomechanical cavity asymmetrically driven around both mechanical sidebands. While, in general, this amplifier is phase-mixing, for a suitable choice of parameters, the amplifier proposed here operates as a phase-sensitive amplifier. We show that both configurations allow amplification with an added noise below the quantum limit of (phase-insensitive) amplification in a parameter range compatible with current experiments in microwave circuit optomechanics. In particular, we show that introducing phase-mixing amplification typically allows for a significant reduction of the added noise.

arXiv:1610.07579•Quantum Science and Technology•Jul 21, 2017•10 citations

Sideband injection locking of microwave frequency combs in a superconducting optomechanical circuit

Jinhoon Jeong, Younghun Ryu, Hyojae Jung +1 more

Superconducting optomechanical circuits enable frequency mixing of optical and mechanical modes, facilitating the generation of microwave frequency combs. However, such optomechanical combs suffer from frequency fluctuations, requiring their stabilization for applications in precision sensing and signal processing. Here, we investigate the sideband injection locking of microwave frequency combs in a niobium-based superconducting optomechanical circuit. By strongly driving the device with a blue-detuned pump to induce parametric instability and introducing an additional tone near individual comb peaks, we study how the locking range varies with the power, the frequency position, and the sweep direction of the injection tone. The locking responses show interesting features such as injection hysteresis, which cannot be explained by existing models. Numerical simulations of the classical optomechanical equations implementing a cubic mechanical nonlinearity show that the nonlinearity contributes to broadening the locking range. We also characterize the Allan deviations and phase noise of the injection-locked combs for different injection frequencies, demonstrating enhanced stability performance. Our results lay the foundation for the utilization of optomechanical combs for applications in nanomechanical sensing and cryogenic microwave pulse generation.

Microsystems & Nanoengineering•Nov 24, 2025•2 citations
High-gain and low-noise signal amplification is a valuable tool in various cryogenic microwave experiments. A microwave optomechanical device, in which a vibrating capacitor modulates the frequency of a microwave cavity, is one technique that is able to amplify microwave signals with high gain and large dynamical range. Such optomechanical amplifiers typically rely on strong backaction of microwave photons on the mechanical mode achieved in the sideband-resolved limit of optomechanics. Here, we observe microwave amplification in an optomechanical cavity in the extremely unresolved sideband limit. A large gain is observed for any detuning of the single pump tone within the cavity linewidth, a clear indication that the amplification is not induced by dynamical backaction. By being able to amplify for any detuning of the pump signal, the amplification center frequency can be tuned over the entire range of the broad cavity linewidth. Additionally, by providing microwave amplification without mechanical amplification, we predict that by using this scheme it is possible to achieve near-quantum-limited microwave amplification despite a large thermal occupation of the mechanical mode.
High-gain amplifiers of electromagnetic signals operating near the quantum limit are crucial for quantum information systems and ultrasensitive quantum measurements.However, the existing techniques have a limited gain-bandwidth product and only operate with weak input signals.Here, we demonstrate a two-port optomechanical scheme for amplification and routing of microwave signals, a system that simultaneously performs high-gain amplification and frequency conversion in the quantum regime.Our amplifier, implemented in a two-cavity microwave optomechanical device, shows 41 dB of gain and has a high dynamic range, handling input signals up to 10 13 photons per second, 3 orders of magnitude more than corresponding Josephson parametric amplifiers.We show that although the active medium, the mechanical resonator, is at a high temperature far from the quantum limit, only 4.6 quanta of noise is added to the input signal.Our method can be readily applied to a wide variety of optomechanical systems, including hybrid optical-microwave systems, creating a universal hub for signals at the quantum level.
We study the directional phase-sensitive amplification between microwave and optical photons in a triple-cavity optomechanical system consisting of three cavities and one mechanical resonator. When the microwave cavity is pumped on both red and blue sidebands but the directly coupled optical cavities are only pumped on the red sidebands, directional phase-sensitive amplification can be realized by tuning the effective optomechanical couplings and the coupling strength between the optical cavities. We show that both gain and bandwidth of the amplifier can be enhanced by increasing the optomechanical cooperativities, indicating an unlimited gain-bandwidth product. Meanwhile, the proposed phase-sensitive amplifier can approach the quantum limit of zero added noise in the large cooperativity limit.
A process which strongly amplifies both quadrature amplitudes of an oscillatory signal necessarily adds noise. Alternatively, if the information in one quadrature is lost in phase-sensitive amplification, it is possible to completely reconstruct the other quadrature. Here we demonstrate such a nearly perfect phase-sensitive measurement using a cavity optomechanical scheme, characterized by an extremely small noise less than 0.2 quanta. The device also strongly squeezes microwave radiation by 8 dB below vacuum. A source of bright squeezed microwaves opens up applications in manipulations of quantum systems, and noiseless amplification can be used even at modest cryogenic temperatures.
We theoretically propose a scheme for realizing a quantum-limited directional amplifier in a triple-cavity optomechanical system, where one microwave cavity and two optical cavities are, respectively, coupled to a common mechanical resonator. Moreover, the two optical cavities are coupled directly to facilitate the directional amplification between microwave and optical photons. We find that directional amplification between the three cavity modes is achieved with two gain process and one conversion process, and the direction of amplification can be modulated by controlling the phase difference between the field-enhanced optomechanical coupling strengths. Furthermore, with increasing the optomechanical cooperativity, both gain and bandwidth of the directional amplifier can be enhanced, and the noise added to the amplifier can be suppressed to approach the standard quantum limit on the phase-preserving linear amplifier.
Abstract The investigation of the ultimate limits imposed by quantum mechanics on amplification represents an important topic both on a fundamental level and from the perspective of potential applications. We discuss here a novel regime for bosonic linear amplifiers—beside phase-insensitive and phase-sensitive amplification—which we term here phase-mixing amplification. Furthermore, we show that phase-mixing amplification can be realised in a cavity optomechanical setup, constituted by a mechanical resonator which is dispersively coupled to an optomechanical cavity asymmetrically driven around both mechanical sidebands. While, in general, this amplifier is phase-mixing, for a suitable choice of parameters, the amplifier proposed here operates as a phase-sensitive amplifier. We show that both configurations allow amplification with an added noise below the quantum limit of (phase-insensitive) amplification in a parameter range compatible with current experiments in microwave circuit optomechanics. In particular, we show that introducing phase-mixing amplification typically allows for a significant reduction of the added noise.
Superconducting optomechanical circuits enable frequency mixing of optical and mechanical modes, facilitating the generation of microwave frequency combs. However, such optomechanical combs suffer from frequency fluctuations, requiring their stabilization for applications in precision sensing and signal processing. Here, we investigate the sideband injection locking of microwave frequency combs in a niobium-based superconducting optomechanical circuit. By strongly driving the device with a blue-detuned pump to induce parametric instability and introducing an additional tone near individual comb peaks, we study how the locking range varies with the power, the frequency position, and the sweep direction of the injection tone. The locking responses show interesting features such as injection hysteresis, which cannot be explained by existing models. Numerical simulations of the classical optomechanical equations implementing a cubic mechanical nonlinearity show that the nonlinearity contributes to broadening the locking range. We also characterize the Allan deviations and phase noise of the injection-locked combs for different injection frequencies, demonstrating enhanced stability performance. Our results lay the foundation for the utilization of optomechanical combs for applications in nanomechanical sensing and cryogenic microwave pulse generation.