The realization of large-scale photonic circuit for quantum optics experiments at telecom wavelengths requires an increasing number of integrated detectors. Superconductive nanowire single photon detectors (SNSPDs) can be easily integrated on chip and they can efficiently detect the light propagating inside waveguides. The thermal budget of cryostats poses a limit on the maximum number of elements that can be integrated on the same chip due to the thermal impact of the readout electronics. In this paper, we propose and implement a novel scheme able for an efficient reading of several SNSPDs with only one readout port, enabling the realization of photonic circuits with a large number of modes.
The realization of large-scale photonic circuit for quantum optics experiments at telecom wavelengths requires an increasing number of integrated detectors. Superconductive nanowire single photon detectors (SNSPDs) can be easily integrated on chip and they can efficiently detect the light propagating inside waveguides. The thermal budget of cryostats poses a limit on the maximum number of elements that can be integrated on the same chip due to the thermal impact of the readout electronics. In this paper, we propose and implement a novel scheme able for an efficient reading of several SNSPDs with only one readout port, enabling the realization of photonic circuits with a large number of modes.
Integrated arrays of Superconducting Nanowire Single Photon Detectors (SNSPDs) have shown capabilities such as Photon Number Resolution, single photon imaging and coincidences detection, and can be effectively used also in other different applications related to quantum optics. The growing complexity of such applications requires the use of multiplexing schemes for the simultaneous readout of different detectors. A simple multiplexing scheme can be realized by arranging a series of SNSPDs elements, shunted by appropriate resistances. The goal of this work is to investigate and optimize this scheme, developing a general method able to identify the optimal sets of shunting resistences for any different application. The methodology obtained is very general, and can be extended to other detection systems.
Integration of photon number resolving superconducting nanowire single-photon detectors (PNR-SNSPDs) with nanophotonic waveguides is a key technology that enables a broad range of quantum technologies on chip-scale platforms. However, all on-chip integrated SNSPDs are fabricated above the waveguide layer, which makes the characteristics of the detector’s photoresponsive film material only depend on the waveguide material, thus lowering the waveguide selectivity. Here, we report an on-chip integrated SNSPD based on optimized topology that the nanowire is sandwiched between the waveguide and the substrate. This device maintains the film characteristics with different waveguides and the light transmitted from the upper waveguide to the substrate is absorbed by the film, which not only increases the selectivity of the waveguide, but also improves light absorption of SNSPD. As an example, SiO2 waveguide with the lower optical transmission loss was fabricated in an integrated PNR-SNSPD. We proposed a multi-channel photon response amplitude superposition multiplexing scheme, which realized photon detection by integrating SNSPD on the optical transmission waveguide in the photonic integrated circuit. The solution not only can effectively read the photon responses of multiple SNSPDs through a readout port, but also can distinguish the number of photons and the corresponding response channels through the amplitude of the readout circuit, thereby realizing a photonic integrated circuit with multiple modes. Finally, we prepared a 4-channel integrated PNR-SNSPD, which resolved the number of photons and corresponding photon response positions through 16 different signal amplitudes. This result is compatible of a wide range of waveguide materials, overcoming the limitation of single photon detector integrated on waveguide for quantum photonic integrated circuit.
Fast and efficient detection of single photons with high timing accuracy is a crucial requirement in most quantum optics experiments and enables novel sensing and imaging solutions. Superconducting nanowire single-photon detectors (SNSPD) achieve technology-leading performance in terms of detection efficiency, dark count rate, timing jitter, and detector dead times. However, conventional SNSPDs with high system detection efficiency typically rely on resonant enhancement of the absorption efficiency, thus only achieving attractive detector benchmarks over narrow spectral windows. Waveguide-integrated SNSPDs allow for leveraging the wideband material absorption in superconducting nanowires by absorbing light in a traveling-wave geometry but have been limited to low system detection efficiencies due to interface losses when coupling to optical fibers. Here, we show how high system detection efficiencies of 22%–73% are realized over a broad wavelength range from 532 nm to 1640 nm in a single waveguide-integrated SNSPD device. We accomplish efficient coupling between optical fibers and waveguide-integrated nanowire detectors by employing a 3D interface, produced in direct laser writing, that relies on total internal reflection for achieving a broad transmission bandwidth. We further find low timing jitter of 25.7 ps and detector decay times of 9.8 ns, allowing for single-photon counting with high repetition rates up to 100 MHz. Our work paves the way for an efficient single-photon detector solution that combines the spectral requirements of an extremely wide range of quantum optics experiments in a single device. The coupling approach and SNSPD-integration with nanophotonic circuits are further well-suited for realizing large-scale detector arrays.
Photonic-integrated circuits have emerged as a scalable platform for complex quantum systems. A central goal is to integrate single-photon detectors to reduce optical losses, latency and wiring complexity associated with off-chip detectors. Superconducting nanowire single-photon detectors (SNSPDs) are particularly attractive because of high detection efficiency, sub-50-ps jitter and nanosecond-scale reset time. However, while single detectors have been incorporated into individual waveguides, the system detection efficiency of multiple SNSPDs in one photonic circuit-required for scalable quantum photonic circuits-has been limited to <0.2%. Here we introduce a micrometer-scale flip-chip process that enables scalable integration of SNSPDs on a range of photonic circuits. Ten low-jitter detectors are integrated on one circuit with 100% device yield. With an average system detection efficiency beyond 10%, and estimated on-chip detection efficiency of 14-52% for four detectors operated simultaneously, we demonstrate, to the best of our knowledge, the first on-chip photon correlation measurements of non-classical light.
Advancements in integrated photonics have enabled the miniaturization and scaling of complex photonic circuits, providing stability and reliability beyond the capabilities of conventional bulk setups. A central component of quantum photonic circuits is the single-photon detector, responsible for quantum state measurement. Due to the stringent performance requirements of quantum applications, superconducting nanowire single-photon detectors (SNSPDs) have emerged as the preferred detection technology, offering superior efficiency, low noise, and high timing resolution. While tabletop SNSPDs are now mature, commercially available and contributed to significant progress in quantum computing and communication, their integration into photonic circuits is still in its infancy. Integrated SNSPDs have shown the potential to not only match but surpass tabletop detectors in several performance metrics. Nevertheless, demonstrations have largely focused on individual integrated detectors, with limited investigation into more complex integrated circuits and advanced functionalities. In this thesis, we present a novel integration platform based on photonic bound states in the continuum (BICs) to address a critical limitation of conventional SNSPD designs, where nanowires placed directly atop the waveguide core are constrained by the core geometry. The etchless nature of our BIC waveguides provides a flat surface that decouples the design of the electronic readout circuitry below from the optical circuit layer above, enabling innovative integrated-nanowire geometries and facilitating large-scale integration of SNSPDs with CMOS-compatible circuits. We established a complete fabrication and characterization workflow for integrating NbTiN-based superconducting nanowires with BIC waveguides. Our integrated detectors achieved state-of-the-art performance, including detection efficiencies exceeding 70%, intrinsic jitter below 70 ps, and ultrafast recovery times (~1.7 ns). These results pave the way toward GHz-rate quantum state measurements, essential for scalable quantum photonic processors. Leveraging the design flexibility of BIC waveguides, we introduce the concept of inline detection with SNSPDs which exploits their unique ability to precisely engineer absorption through nanowire length control. By cascading multiple partially absorbing SNSPDs, it is possible to significantly reduce the number of required optical components and miniaturize complex quantum measurement setups within an extremely compact footprint. Traditional integration geometries prevent such implementations due to significant scattering losses at nanowire terminations, which limit the feasibility of cascaded designs. On the other hand, the design flexibility provided by our BIC platform makes it ideal for development of inline detection schemes. As a proof-of-concept, we use inline detection to miniaturize two fundamental quantum optics tools: an integrated Hanbury Brown and Twiss (HBT) interferometer and a photon-number-resolving (PNR) detector. We replicated the functionalities of these setups using only two nanowires integrated along a single waveguide. These devices show extremely compact footprint, highlighting the scalability potential of our approach. We validated these devices through characterization of a single-photon source and the discrimination of collinear photon pairs. The experimental results aligned well with previous literature and theoretical predictions, confirming the reliability of our integration method. Overall, this work presents a novel approach to quantum measurements within integrated quantum photonic circuits. Inline detection represents a step forward in quantum integrated photonics, moving from individual device demonstrations toward functional quantum circuits. By introducing our BIC-based integration platform, we simplify detector design and fabrication, lowering barriers to the development of inline detection circuits and opening new opportunities in multiphoton quantum state measurements, single-photon spectroscopy, and multiphoton subtraction.