Challenges
Datasets
Workspaces
Papers
Discussions
Leaderboard
Log inSign up
Challenges
Datasets
Workspaces
Papers
Discussions
Leaderboard
Blog
Job Board
Q3AS

© 2026 Aqora Quantum S.A.S.

TermsPrivacyLegal Notice

arXiv:1811.02971 · Physical Review Applied

Quantitative Modeling of Superconducting Planar Resonators for Electron Spin Resonance

Stefan Weichselbaumer, Petio Natzkin, Christoph W. Zollitsch, Mathias Weiler, Rudolf Gross, Hans Huebl

Published Aug 12, 2019• 26 citations
arXivHTMLPDF

Abstract

Engineering and understanding microwave resonators is essential for the efficient electron-spin control and readout in electron-spin-resonance (ESR) spectroscopy. This work, focused on superconducting planar microresonators, presents finite-element simulations modeling the spin-photon coupling rate, in quantitative agreement with experimental data. Three resonator designs are optimized to address spectroscopy applications in $\ensuremath{\mu}$m-thick samples, with one exhibiting notably good magnetic field homogeneity at microwave frequencies.

DOI
10.1103/physrevapplied.12.024021

Related papers

Fabrication and characterization of NbTi microwave superconducting resonators

Roberto Russo, André Chatel, Nergiz Şahin Solmaz +4 more

Superconducting resonators are widely used in fields spanning from quantum computing to electron spin resonance (ESR) spectroscopy. With the goal of realizing superconducting resonators, a broad variety and combination of superconducting materials, substrates and fabrication processes have been used and thoroughly reported in the literature. High temperature superconductors such as YBCO and low temperature superconductors such as Nb, NbN, NbTiN and Al are the major actors in the domain. In this work, we investigate the possibility to extend the family of suitable low temperature superconductors for the realization of planar superconducting microwave resonators for future ESR applications. In particular, this study focuses on NbTi, a widely used material to realize superconducting cables but not investigated for planar resonating structures at GHz frequencies. A 150 nm thick film of NbTi is sputtered and patterned on top of an Al2O3 substrate. For devices resonating around 6.8 GHz quality factors greater than 10,000 are observed at 3 K and in magnetic fields up to 250 mT.

Micro and Nano Engineering•May 10, 2023•9 citations

High-Cooperativity Coupling of Rare-Earth Spins to a Planar Superconducting Resonator

Sihao Wang, Likai Yang, R. L. Cone +2 more

In one branch of quantum information processing, high cooperativity between spins and a resonator is essential. Planar superconducting resonators present an opportunity for miniaturization and fully integrated circuitry, but unfortunately their cooperativity is a fraction of that of their bulk counterparts. This study designs a planar microwave resonator to achieve homogeneous magnetic field, and utilizes the anisotropic g-factor tensor of erbium spins in yttrium orthosilicate for maximum spin-photon coupling. Cooperativity on par with that of a three-dimensional cavity is achieved, marking an exciting step toward integrated circuits for spin quantum information processing.

arXiv:2206.12646•Physical Review Applied•Jul 28, 2022•7 citations

Superconducting microwave oscillators as detectors for ESR spectroscopy

Roberto Russo, André Chatel, N. Brusadin +5 more

Microwave superconducting resonators are extensively studied in fields such as quantum computing and electron spin resonance (ESR) spectroscopy. However, the integration of superconducting resonators with feedback mechanisms to create ultra-low noise oscillators is a relatively unexplored area, and the application of such oscillators in ESR spectroscopy has not yet been demonstrated. In this work, we report the design, fabrication, and application of microwave oscillators based on superconducting resonators for ESR spectroscopy, illustrating an alternative way for the improvement of the performance of oscillator based ESR sensors. Specifically, ESR spectra are obtained by measuring the oscillator's frequency shift induced by the ESR effect as a function of the applied static magnetic field. The oscillators are composed of a single heterojunction bipolar transistor or high electron mobility transistor coupled with NbTi or YBa2Cu3O7 (YBCO) superconducting resonators. The fabricated oscillators operate at frequencies of 0.6 and 1.7 GHz and temperatures up to 80 K (for YBCO resonators) and 8 K (for NbTi resonators). The lowest measured frequency noise is about 9 mHz/Hz1/2 (−139 dBc/Hz), the best spin sensitivity is about 1×1010 spins/Hz1/2, and the best concentration sensitivity is about 3×1018 spins/Hz1/2m3. The approach proposed in this work should allow for significantly better spin and concentration sensitivities compared to those achievable with normal conductors, up to operating frequencies, magnetic fields, and temperatures, where superconductors exhibit substantially lower effective microwave resistance than normal conductors.

arXiv:2501.10762•Applied Physics Letters•Apr 1, 2025•3 citations

Hybrid quantum systems with high-T$$_c$$ superconducting resonators

Z. Velluire-Pellat, É. Maréchal, N. Moulonguet +11 more

Superconducting microwave resonators are crucial elements of microwave circuits, offering a wide range of potential applications in modern science and technology. While conventional low-T[Formula: see text] superconductors are mainly employed, high-T[Formula: see text] cuprates could offer enhanced temperature and magnetic field operating ranges. Here, we report the realization of [Formula: see text] superconducting coplanar waveguide resonators, and demonstrate a continuous evolution from a lossy undercoupled regime, to a lossless overcoupled regime by adjusting the device geometry, in good agreement with circuit model theory. A high-quality factor resonator was then used to perform electron spin resonance measurements on a molecular spin ensemble across a temperature range spanning two decades. We observe spin-cavity hybridization indicating coherent coupling between the microwave field and the spins in a highly cooperative regime. The temperature dependence of the Rabi splitting and the spin relaxation time point toward an antiferromagnetic coupling of the spins below 2 K. Our findings indicate that high-Tc superconducting resonators hold great promise for the development of functional circuits. Additionally, they suggest novel approaches for achieving hybrid quantum systems based on high-T[Formula: see text] superconductors and for conducting electron spin resonance measurements over a wide range of magnetic fields and temperatures.

Scientific Reports•Sep 1, 2023•23 citations

Characterization of harmonic modes and parasitic resonances in multi-mode superconducting coplanar resonators

Cenk Beydeda, Konstantin Nikolaou, Marius Tochtermann +8 more

Planar superconducting microwave transmission line resonators can be operated at multiple harmonic resonance frequencies. This allows covering wide spectral regimes with high sensitivity, as it is desired, e.g., for cryogenic microwave spectroscopy. A common complication of such experiments is the presence of undesired “spurious” additional resonances, which are due to standing waves within the resonator substrate or housing box. Identifying the nature of individual resonances (“designed” vs “spurious”) can become challenging for higher frequencies or if elements with unknown material properties are included, as is common for microwave spectroscopy. Here, we discuss various experimental strategies to distinguish designed and spurious modes in coplanar superconducting resonators that are operated in a broad frequency range up to 20 GHz. These strategies include tracking resonance evolution as a function of temperature, magnetic field, and microwave power. We also demonstrate that local modification of the resonator, by applying minute amounts of dielectric or electron spin resonance-active materials, leads to characteristic signatures in the various resonance modes, depending on the local strength of the electric or magnetic microwave fields.

arXiv:2303.15914•AIP Advances•Oct 1, 2023•3 citations

Coherent coupling of molecular spins with microwave photons in planar superconducting resonators

Claudio Bonizzoni, Alberto Ghirri, M. Affronte

Within the quest for solid state quantum systems to be used for fundamental as well as applied research, molecular spins have recently emerged as a versatile platform with interesting performances in terms of quantum coherence and correlation. Molecular units provide well defined environment to electronic spins and they represent elementary bricks for complex nano-architectures and nano-devices. Here we review our recent efforts and results on their efficient integration in circuit Quantum ElectroDynamics and, more specifically, in reaching their coherent coupling with microwave photons in planar resonators. To monitor molecular spin performances over a wide temperature and magnetic field range we have first developed microwave planar resonators made of high T c superconductors, obtaining excellent performances up to liquid Nitrogen temperature and in magnetic fields up to 7 Tesla. Ensembles of different molecular spins systems are then systematically tested. The regime of high spin-photon cooperativity is achieved with molecular spins diluted in non-magnetic matrix at 0.5 K, while the strong coupling regime is observed with concentrated samples of organic radicals up to 50 K. The possibility to create coherent states among distinct spin ensembles is further explored in similar spectroscopic experiments. These results show that molecular spins can be efficiently integrated in quantum devices.

Advances in Physics X•Jan 1, 2018•26 citations
Engineering and understanding microwave resonators is essential for the efficient electron-spin control and readout in electron-spin-resonance (ESR) spectroscopy. This work, focused on superconducting planar microresonators, presents finite-element simulations modeling the spin-photon coupling rate, in quantitative agreement with experimental data. Three resonator designs are optimized to address spectroscopy applications in \ensuremathμ\ensuremath{\mu}\ensuremathμm-thick samples, with one exhibiting notably good magnetic field homogeneity at microwave frequencies.
Superconducting resonators are widely used in fields spanning from quantum computing to electron spin resonance (ESR) spectroscopy. With the goal of realizing superconducting resonators, a broad variety and combination of superconducting materials, substrates and fabrication processes have been used and thoroughly reported in the literature. High temperature superconductors such as YBCO and low temperature superconductors such as Nb, NbN, NbTiN and Al are the major actors in the domain. In this work, we investigate the possibility to extend the family of suitable low temperature superconductors for the realization of planar superconducting microwave resonators for future ESR applications. In particular, this study focuses on NbTi, a widely used material to realize superconducting cables but not investigated for planar resonating structures at GHz frequencies. A 150 nm thick film of NbTi is sputtered and patterned on top of an Al2O3 substrate. For devices resonating around 6.8 GHz quality factors greater than 10,000 are observed at 3 K and in magnetic fields up to 250 mT.
In one branch of quantum information processing, high cooperativity between spins and a resonator is essential. Planar superconducting resonators present an opportunity for miniaturization and fully integrated circuitry, but unfortunately their cooperativity is a fraction of that of their bulk counterparts. This study designs a planar microwave resonator to achieve homogeneous magnetic field, and utilizes the anisotropic g-factor tensor of erbium spins in yttrium orthosilicate for maximum spin-photon coupling. Cooperativity on par with that of a three-dimensional cavity is achieved, marking an exciting step toward integrated circuits for spin quantum information processing.
Microwave superconducting resonators are extensively studied in fields such as quantum computing and electron spin resonance (ESR) spectroscopy. However, the integration of superconducting resonators with feedback mechanisms to create ultra-low noise oscillators is a relatively unexplored area, and the application of such oscillators in ESR spectroscopy has not yet been demonstrated. In this work, we report the design, fabrication, and application of microwave oscillators based on superconducting resonators for ESR spectroscopy, illustrating an alternative way for the improvement of the performance of oscillator based ESR sensors. Specifically, ESR spectra are obtained by measuring the oscillator's frequency shift induced by the ESR effect as a function of the applied static magnetic field. The oscillators are composed of a single heterojunction bipolar transistor or high electron mobility transistor coupled with NbTi or YBa2Cu3O7 (YBCO) superconducting resonators. The fabricated oscillators operate at frequencies of 0.6 and 1.7 GHz and temperatures up to 80 K (for YBCO resonators) and 8 K (for NbTi resonators). The lowest measured frequency noise is about 9 mHz/Hz1/2 (−139 dBc/Hz), the best spin sensitivity is about 1×1010 spins/Hz1/2, and the best concentration sensitivity is about 3×1018 spins/Hz1/2m3. The approach proposed in this work should allow for significantly better spin and concentration sensitivities compared to those achievable with normal conductors, up to operating frequencies, magnetic fields, and temperatures, where superconductors exhibit substantially lower effective microwave resistance than normal conductors.
Hybrid quantum systems with high-Tc_cc​ superconducting resonators
Superconducting microwave resonators are crucial elements of microwave circuits, offering a wide range of potential applications in modern science and technology. While conventional low-T[Formula: see text] superconductors are mainly employed, high-T[Formula: see text] cuprates could offer enhanced temperature and magnetic field operating ranges. Here, we report the realization of [Formula: see text] superconducting coplanar waveguide resonators, and demonstrate a continuous evolution from a lossy undercoupled regime, to a lossless overcoupled regime by adjusting the device geometry, in good agreement with circuit model theory. A high-quality factor resonator was then used to perform electron spin resonance measurements on a molecular spin ensemble across a temperature range spanning two decades. We observe spin-cavity hybridization indicating coherent coupling between the microwave field and the spins in a highly cooperative regime. The temperature dependence of the Rabi splitting and the spin relaxation time point toward an antiferromagnetic coupling of the spins below 2 K. Our findings indicate that high-Tc superconducting resonators hold great promise for the development of functional circuits. Additionally, they suggest novel approaches for achieving hybrid quantum systems based on high-T[Formula: see text] superconductors and for conducting electron spin resonance measurements over a wide range of magnetic fields and temperatures.
Planar superconducting microwave transmission line resonators can be operated at multiple harmonic resonance frequencies. This allows covering wide spectral regimes with high sensitivity, as it is desired, e.g., for cryogenic microwave spectroscopy. A common complication of such experiments is the presence of undesired “spurious” additional resonances, which are due to standing waves within the resonator substrate or housing box. Identifying the nature of individual resonances (“designed” vs “spurious”) can become challenging for higher frequencies or if elements with unknown material properties are included, as is common for microwave spectroscopy. Here, we discuss various experimental strategies to distinguish designed and spurious modes in coplanar superconducting resonators that are operated in a broad frequency range up to 20 GHz. These strategies include tracking resonance evolution as a function of temperature, magnetic field, and microwave power. We also demonstrate that local modification of the resonator, by applying minute amounts of dielectric or electron spin resonance-active materials, leads to characteristic signatures in the various resonance modes, depending on the local strength of the electric or magnetic microwave fields.
Within the quest for solid state quantum systems to be used for fundamental as well as applied research, molecular spins have recently emerged as a versatile platform with interesting performances in terms of quantum coherence and correlation. Molecular units provide well defined environment to electronic spins and they represent elementary bricks for complex nano-architectures and nano-devices. Here we review our recent efforts and results on their efficient integration in circuit Quantum ElectroDynamics and, more specifically, in reaching their coherent coupling with microwave photons in planar resonators. To monitor molecular spin performances over a wide temperature and magnetic field range we have first developed microwave planar resonators made of high T c superconductors, obtaining excellent performances up to liquid Nitrogen temperature and in magnetic fields up to 7 Tesla. Ensembles of different molecular spins systems are then systematically tested. The regime of high spin-photon cooperativity is achieved with molecular spins diluted in non-magnetic matrix at 0.5 K, while the strong coupling regime is observed with concentrated samples of organic radicals up to 50 K. The possibility to create coherent states among distinct spin ensembles is further explored in similar spectroscopic experiments. These results show that molecular spins can be efficiently integrated in quantum devices.